commit bec0de4cfad21bd284dbddee016ed1767a5d2823 upstream.

KEXEC needs the new kernel's load address to be aligned on a page
boundary (see sanity_check_segment_list()), but on MIPS the default
vmlinuz load address is only explicitly aligned to 16 bytes.

Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase
the alignment calculated by calc_vmlinuz_load_addr to 64KB.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21131/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 2.6.36+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 92aa0718c9fa5160ad2f0e7b5bffb52f1ea1e51a upstream.

This patch is borrowed from ARM64 to ensure pmd_present() returns false
after pmd_mknotpresent(). This is needed for THP.

References: 5bb1cc0f ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()")
Reviewed-by: NJames Hogan <jhogan@kernel.org>
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21135/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.8+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bb53fdf395eed103f85061bfff3b116cee123895 upstream.

For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can
only flush Node-0's scache. So we add r4k_blast_scache_node() by using
(CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the
start address.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
[paul.burton@mips.com: Include asm/mmzone.h from asm/r4kcache.h for
		       nid_to_addrbase(). Add asm/mach-generic/mmzone.h
		       to allow inclusion for all platforms.]
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21129/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <james.hogan@mips.com>
Cc: Steven J . Hill <Steven.Hill@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit adcc81f148d733b7e8e641300c5590a2cdc13bf3 upstream.

Mapping the delay slot emulation page as both writeable & executable
presents a security risk, in that if an exploit can write to & jump into
the page then it can be used as an easy way to execute arbitrary code.

Prevent this by mapping the page read-only for userland, and using
access_process_vm() with the FOLL_FORCE flag to write to it from
mips_dsemul().

This will likely be less efficient due to copy_to_user_page() performing
cache maintenance on a whole page, rather than a single line as in the
previous use of flush_cache_sigtramp(). However this delay slot
emulation code ought not to be running in any performance critical paths
anyway so this isn't really a problem, and we can probably do better in
copy_to_user_page() anyway in future.

A major advantage of this approach is that the fix is small & simple to
backport to stable kernels.
Reported-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Fixes: 432c6bac ("MIPS: Use per-mm page to execute branch delay slot instructions")
Cc: stable@vger.kernel.org # v4.8+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Rich Felker <dalias@libc.org>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f024cf085c423bac7512479f45c34ee9a24af7ce upstream.

In the case that a bprintk event has a dereferenced pointer that is
stored as a string, and there's more values to process (more args), the
arg was not updated to point to the next arg after processing the
dereferenced pointer, and it screwed up what was to be displayed.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 37db96bb ("tools lib traceevent: Handle new pointer processing of bprint strings")
Link: http://lkml.kernel.org/r/20181210134522.3f71e2ca@gandalf.local.homeSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e5f71a27fa12c1a1b02ad478a568e76260f1815e upstream.

text[s] is a signed char, so using that as index into the font8x16 array
can result in negative indices. Cast it to u8 to be safe.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>      # for v4.7 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 62dcb4f41836bd3c44b5b651bb6df07ea4cb1551 upstream.

vb2_core_create_bufs did not check if the memory model for newly added
buffers is the same as for already existing buffers. It should return an
error if they aren't the same.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+e1fb118a2ebb88031d21@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>      # for v4.16 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 560ccb75c2caa6b1039dec1a53cd2ef526f5bf03 upstream.

When vivid_update_format_cap() is called it should free any overlay
bitmap since the compose size will change.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+0cc8e3cc63ca373722c6@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>      # for v3.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cea8c0077d6cf3a0cea2f18a8e914af78d46b2ff upstream.

imx274_read_reg() takes a u8 pointer ("reg") and casts it to pass it
to regmap_read(), which takes an unsigned int pointer. This results in
a corrupted stack and random crashes.

Fixes: 0985dd30 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor")

Cc: stable@vger.kernel.org # for 4.15 and up
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e5bb9d3d755f128956ed467ae50b41d22bb680c6 upstream.

This fixes an oops in ir_lirc_scancode_event().

BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P           OE 4.18.12-200.fc28.x86_64 #1
Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018
Workqueue: events pulse8_irq_work_handler [pulse8_cec]
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core]
Code: 8d ae b4 07 00 00 49 81 c6 b8 07 00 00 53 e8 4a df c3 d5 48 89 ef 49 89 45 00 e8 4e 84 41 d6 49 8b 1e 49 89 c4 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:ffffaa10e3c07d58 EFLAGS: 00010017
RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000018
RDX: 0000000000000001 RSI: 00316245397fa93c RDI: ffff966d31c8d7b4
RBP: ffff966d31c8d7b4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: ffffaa10e3c07e28 R12: 0000000000000002
R13: ffffaa10e3c07d88 R14: ffff966d31c8d7b8 R15: 0000000000000073
FS:  0000000000000000(0000) GS:ffff966d3f440000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 00000009d820a003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ir_do_keydown+0x75/0x260 [rc_core]
 rc_keydown+0x54/0xc0 [rc_core]
 cec_received_msg_ts+0xaa8/0xaf0 [cec]
 process_one_work+0x1a1/0x350
 worker_thread+0x30/0x380
 ? pwq_unbound_release_workfn+0xd0/0xd0
 kthread+0x112/0x130
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x35/0x40
Modules linked in: rc_tt_1500 dvb_usb_dvbsky dvb_usb_v2 uas usb_storage fuse vhost_net vhost tap xt_CHECKSUM iptable_mangle ip6t_REJECT nf_reject_ipv6 tun 8021q garp mrp xt_nat macvlan xfs devlink ebta
 si2157 si2168 cx25840 cx23885 kvm altera_ci tda18271 joydev ir_rc6_decoder rc_rc6_mce crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore altera_stapl m88ds3103 tveeprom cx2341
 mxm_wmi igb crc32c_intel megaraid_sas dca i2c_algo_bit wmi vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio i2c_dev
CR2: 0000000000000038

Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ac791f19a273a7fe254a7596f193af6534582a9f upstream.

If the tx_ignore_nack_until_eom error injection was activated,
then tx_nacked was never set instead of setting it when the last
byte of the message was transmitted.

As a result the transmit was marked as OK, when it should have
been NACKed.

Modify the condition so that it always sets tx_nacked when the
last byte of the message was transmitted.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.17 and up
Signed-off-by: NHans Verkuil <hansverk@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 32804fcb612bf867034a093f459415e485cf044b upstream.

I noticed that repeatedly running 'cec-ctl --playback' would occasionally
select 'Playback Device 2' instead of 'Playback Device 1', even though there
were no other Playback devices in the HDMI topology. This happened both with
'real' hardware and with the vivid CEC emulation, suggesting that this was an
issue in the core code that claims a logical address.

What 'cec-ctl --playback' does is to first clear all existing logical addresses,
and immediately after that configure the new desired device type.

The core code will poll the logical addresses trying to find a free address.
When found it will issue a few standard messages as per the CEC spec and return.
Those messages are queued up and will be transmitted asynchronously.

What happens is that if you run two 'cec-ctl --playback' commands in quick
succession, there is still a message of the first cec-ctl command being transmitted
when you reconfigure the adapter again in the second cec-ctl command.

When the logical addresses are cleared, then all information about outstanding
transmits inside the CEC core is also cleared, and the core is no longer aware
that there is still a transmit in flight.

When the hardware finishes the transmit it calls transmit_done and the CEC core
thinks it is actually in response of a POLL messages that is trying to find a
free logical address. The result of all this is that the core thinks that the
logical address for Playback Device 1 is in use, when it is really an earlier
transmit that ended.

The main transmit thread looks at adap->transmitting to check if a transmit
is in progress, but that is set to NULL when the adapter is unconfigured.
adap->transmitting represents the view of userspace, not that of the hardware.
So when unconfiguring the adapter the message is marked aborted from the point
of view of userspace, but seen from the PoV of the hardware it is still ongoing.

So introduce a new bool transmit_in_progress that represents the hardware state
and use that instead of adap->transmitting. Now the CEC core waits until the
hardware finishes the transmit before starting a new transmit.
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>      # for v4.18 and up
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 260683137ab5276113fc322fdbbc578024185fee upstream.

This patch Correct the RX interrupt mask value to handle the
RX interrupts properly.

Fixes: c8dbdc84 ("serial: xuartps: Rewrite the interrupt handling logic")
Signed-off-by: NNava kishore Manne <nava.manne@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 64beba0558fce7b59e9a8a7afd77290e82a22163 upstream.

There is a security report where f2fs_getxattr() has a hole to expose wrong
memory region when the image is malformed like this.

f2fs_getxattr: entry->e_name_len: 4, size: 12288, buffer_size: 16384, len: 4

Cc: <stable@vger.kernel.org>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 88960068f25fcc3759455d85460234dcc9d43fef upstream.

Treat "block_count" from struct f2fs_super_block as 64-bit little endian
value in sanity_check_raw_super() because struct f2fs_super_block
declares "block_count" as "__le64".

This fixes a bug where the superblock validation fails on big endian
devices with the following error:
  F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
  F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock
  F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
  F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock
As result of this the partition cannot be mounted.

With this patch applied the superblock validation works fine and the
partition can be mounted again:
  F2FS-fs (sda1): Mounted with checkpoint version = 7c84

My little endian x86-64 hardware was able to mount the partition without
this fix.
To confirm that mounting f2fs filesystems works on big endian machines
again I tested this on a 32-bit MIPS big endian (lantiq) device.

Fixes: 0cfe75c5 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows")
Cc: stable@vger.kernel.org
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ea295dd853e0879a9a30ab61f923c26be35b902 upstream.

The function truncate_node frees the page with f2fs_put_page. However,
the page index is read after that. So, the patch reads the index before
freeing the page.

Fixes: bf39c00a ("f2fs: drop obsolete node page when it is truncated")
Cc: <stable@vger.kernel.org>
Signed-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d8a706414af4827fc0b4b1c0c631c607351938b9 upstream.

get_unlocked_entry() uses an exclusive wait because it is guaranteed to
eventually obtain the lock and follow on with an unlock+wakeup cycle.
The wait_entry_unlocked() path does not have the same guarantee. Rather
than open-code an extra wakeup, just switch to a non-exclusive wait.

Cc: Matthew Wilcox <willy@infradead.org>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 55e56f06ed71d9441f3abd5b1d3c1a870812b3fe upstream.

After we drop the i_pages lock, the inode can be freed at any time.
The get_unlocked_entry() code has no choice but to reacquire the lock,
so it can't be used here.  Create a new wait_entry_unlocked() which takes
care not to acquire the lock or dereference the address_space in any way.

Fixes: c2a7d2a1 ("filesystem-dax: Introduce dax_lock_mapping_entry()")
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 6f5b9f018f4c7686fd944d920209d1382d320e4e upstream.

There is a TM Bad Thing bug that can be caused when you return from a
signal context in a suspended transaction but with ucontext MSR[TS] unset.

This forces regs->msr[TS] to be set at syscall entrance (since the CPU
state is transactional). It also calls treclaim() to flush the transaction
state, which is done based on the live (mfmsr) MSR state.

Since user context MSR[TS] is not set, then restore_tm_sigcontexts() is not
called, thus, not executing recheckpoint, keeping the CPU state as not
transactional. When calling rfid, SRR1 will have MSR[TS] set, but the CPU
state is non transactional, causing the TM Bad Thing with the following
stack:

	[   33.862316] Bad kernel stack pointer 3fffd9dce3e0 at c00000000000c47c
	cpu 0x8: Vector: 700 (Program Check) at [c00000003ff7fd40]
	    pc: c00000000000c47c: fast_exception_return+0xac/0xb4
	    lr: 00003fff865f442c
	    sp: 3fffd9dce3e0
	   msr: 8000000102a03031
	  current = 0xc00000041f68b700
	  paca    = 0xc00000000fb84800   softe: 0        irq_happened: 0x01
	    pid   = 1721, comm = tm-signal-sigre
	Linux version 4.9.0-3-powerpc64le (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
	WARNING: exception is not recoverable, can't continue

The same problem happens on 32-bits signal handler, and the fix is very
similar, if tm_recheckpoint() is not executed, then regs->msr[TS] should be
zeroed.

This patch also fixes a sparse warning related to lack of indentation when
CONFIG_PPC_TRANSACTIONAL_MEM is set.

Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context")
CC: Stable <stable@vger.kernel.org>	# 3.10+
Signed-off-by: NBreno Leitao <leitao@debian.org>
Tested-by: NMichal Suchánek <msuchanek@suse.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b72c51a58e6d63ef673ac96b8ab5bc98799c5f7b upstream.

I ended up tracking down some rather nasty issues with f2fs (and other
filesystem modules) constantly crashing on my kernel down to a
combination of out of bounds memory accesses, one of which was coming
from brcmfmac during module load:

[   30.891382] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[   30.894437] ==================================================================
[   30.901581] BUG: KASAN: global-out-of-bounds in brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac]
[   30.909935] Read of size 1 at addr ffff2000024865df by task kworker/6:2/387
[   30.916805]
[   30.918261] CPU: 6 PID: 387 Comm: kworker/6:2 Tainted: G           O      4.20.0-rc3Lyude-Test+ #19
[   30.927251] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[   30.935964] Workqueue: events brcmf_driver_register [brcmfmac]
[   30.941641] Call trace:
[   30.944058]  dump_backtrace+0x0/0x3e8
[   30.947676]  show_stack+0x14/0x20
[   30.950968]  dump_stack+0x130/0x1c4
[   30.954406]  print_address_description+0x60/0x25c
[   30.959066]  kasan_report+0x1b4/0x368
[   30.962683]  __asan_report_load1_noabort+0x18/0x20
[   30.967547]  brcmf_fw_alloc_request+0x42c/0x480 [brcmfmac]
[   30.967639]  brcmf_sdio_probe+0x163c/0x2050 [brcmfmac]
[   30.978035]  brcmf_ops_sdio_probe+0x598/0xa08 [brcmfmac]
[   30.983254]  sdio_bus_probe+0x190/0x398
[   30.983270]  really_probe+0x2a0/0xa70
[   30.983296]  driver_probe_device+0x1b4/0x2d8
[   30.994901]  __driver_attach+0x200/0x280
[   30.994914]  bus_for_each_dev+0x10c/0x1a8
[   30.994925]  driver_attach+0x38/0x50
[   30.994935]  bus_add_driver+0x330/0x608
[   30.994953]  driver_register+0x140/0x388
[   31.013965]  sdio_register_driver+0x74/0xa0
[   31.014076]  brcmf_sdio_register+0x14/0x60 [brcmfmac]
[   31.023177]  brcmf_driver_register+0xc/0x18 [brcmfmac]
[   31.023209]  process_one_work+0x654/0x1080
[   31.032266]  worker_thread+0x4f0/0x1308
[   31.032286]  kthread+0x2a8/0x320
[   31.039254]  ret_from_fork+0x10/0x1c
[   31.039269]
[   31.044226] The buggy address belongs to the variable:
[   31.044351]  brcmf_firmware_path+0x11f/0xfffffffffffd3b40 [brcmfmac]
[   31.055601]
[   31.057031] Memory state around the buggy address:
[   31.061800]  ffff200002486480: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[   31.068983]  ffff200002486500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   31.068993] >ffff200002486580: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00
[   31.068999]                                                     ^
[   31.069017]  ffff200002486600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   31.096521]  ffff200002486680: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
[   31.096528] ==================================================================
[   31.096533] Disabling lock debugging due to kernel taint

It appears that when trying to determine the length of the string in the
alternate firmware path, we make the mistake of not handling the case
where the firmware path is empty correctly. Since strlen(mp_path) can
return 0, we'll end up accessing mp_path[-1] when the firmware_path
isn't provided through the module arguments.

So, fix this by just setting the end char to '\0' by default, and only
changing it if we have a non-zero length. Additionally, use strnlen()
with BRCMF_FW_ALTPATH_LEN instead of strlen() just to be extra safe.

Fixes: 2baa3aae ("brcmfmac: introduce brcmf_fw_alloc_request() function")
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Arend Van Spriel <arend.vanspriel@broadcom.com>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Dan Haab <dhaab@luxul.com>
Cc: Jia-Shyr Chuang <saint.chuang@cypress.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8c892df41500469729e0d662816300196e4f463d upstream.

When the update_connect_param callback is set, nl80211 expects the flag
WIPHY_FLAG_SUPPORTS_FW_ROAM to be set as well. However, this flag is
only set when modparam roamoff=0, while the callback is set
unconditionally. Since commit 7f9a3e15 this causes a warning in
wiphy_register, which breaks brcmfmac.

Disable the update_connect_param callback when roamoff=0 to fix this.

Fixes: 7f9a3e15 ("nl80211: Update ERP info using NL80211_CMD_UPDATE_CONNECT_PARAMS")
Cc: Stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: NJonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: NStijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be6821f82c3cc36e026f5afd10249988852b35ea upstream.

If we create a snapshot of a snapshot currently being used by a send
operation, we can end up with send failing unexpectedly (returning
-ENOENT error to user space for example). The following diagram shows
how this happens.

            CPU 1                                   CPU2                                CPU3

 btrfs_ioctl_send()
  (...)
                                     create_snapshot()
                                      -> creates snapshot of a
                                         root used by the send
                                         task
                                      btrfs_commit_transaction()
                                       create_pending_snapshot()
  __get_inode_info()
   btrfs_search_slot()
    btrfs_search_slot_get_root()
     down_read commit_root_sem

     get reference on eb of the
     commit root
      -> eb with bytenr == X

     up_read commit_root_sem

                                        btrfs_cow_block(root node)
                                         btrfs_free_tree_block()
                                          -> creates delayed ref to
                                             free the extent

                                       btrfs_run_delayed_refs()
                                        -> runs the delayed ref,
                                           adds extent to
                                           fs_info->pinned_extents

                                       btrfs_finish_extent_commit()
                                        unpin_extent_range()
                                         -> marks extent as free
                                            in the free space cache

                                      transaction commit finishes

                                                                       btrfs_start_transaction()
                                                                        (...)
                                                                        btrfs_cow_block()
                                                                         btrfs_alloc_tree_block()
                                                                          btrfs_reserve_extent()
                                                                           -> allocates extent at
                                                                              bytenr == X
                                                                          btrfs_init_new_buffer(bytenr X)
                                                                           btrfs_find_create_tree_block()
                                                                            alloc_extent_buffer(bytenr X)
                                                                             find_extent_buffer(bytenr X)
                                                                              -> returns existing eb,
                                                                                 which the send task got

                                                                        (...)
                                                                         -> modifies content of the
                                                                            eb with bytenr == X

    -> uses an eb that now
       belongs to some other
       tree and no more matches
       the commit root of the
       snapshot, resuts will be
       unpredictable

The consequences of this race can be various, and can lead to searches in
the commit root performed by the send task failing unexpectedly (unable to
find inode items, returning -ENOENT to user space, for example) or not
failing because an inode item with the same number was added to the tree
that reused the metadata extent, in which case send can behave incorrectly
in the worst case or just fail later for some reason.

Fix this by performing a copy of the commit root's extent buffer when doing
a search in the context of a send operation.

CC: stable@vger.kernel.org # 4.4.x: 1fc28d8e: Btrfs: move get root out of btrfs_search_slot to a helper
CC: stable@vger.kernel.org # 4.4.x: f9ddfd05: Btrfs: remove unused check of skip_locking
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0568e82dbe2510fc1fa664f58e5c997d3f1e649e upstream.

With my delayed refs patches in place we started seeing a large amount
of aborts in __btrfs_free_extent:

 BTRFS error (device sdb1): unable to find ref byte nr 91947008 parent 0 root 35964  owner 1 offset 0
 Call Trace:
  ? btrfs_merge_delayed_refs+0xaf/0x340
  __btrfs_run_delayed_refs+0x6ea/0xfc0
  ? btrfs_set_path_blocking+0x31/0x60
  btrfs_run_delayed_refs+0xeb/0x180
  btrfs_commit_transaction+0x179/0x7f0
  ? btrfs_check_space_for_delayed_refs+0x30/0x50
  ? should_end_transaction.isra.19+0xe/0x40
  btrfs_drop_snapshot+0x41c/0x7c0
  btrfs_clean_one_deleted_snapshot+0xb5/0xd0
  cleaner_kthread+0xf6/0x120
  kthread+0xf8/0x130
  ? btree_invalidatepage+0x90/0x90
  ? kthread_bind+0x10/0x10
  ret_from_fork+0x35/0x40

This was because btrfs_drop_snapshot depends on the root not being
modified while it's dropping the snapshot.  It will unlock the root node
(and really every node) as it walks down the tree, only to re-lock it
when it needs to do something.  This is a problem because if we modify
the tree we could cow a block in our path, which frees our reference to
that block.  Then once we get back to that shared block we'll free our
reference to it again, and get ENOENT when trying to lookup our extent
reference to that block in __btrfs_free_extent.

This is ultimately happening because we have delayed items left to be
processed for our deleted snapshot _after_ all of the inodes are closed
for the snapshot.  We only run the delayed inode item if we're deleting
the inode, and even then we do not run the delayed insertions or delayed
removals.  These can be run at any point after our final inode does its
last iput, which is what triggers the snapshot deletion.  We can end up
with the snapshot deletion happening and then have the delayed items run
on that file system, resulting in the above problem.

This problem has existed forever, however my patches made it much easier
to hit as I wake up the cleaner much more often to deal with delayed
iputs, which made us more likely to start the snapshot dropping work
before the transaction commits, which is when the delayed items would
generally be run.  Before, generally speaking, we would run the delayed
items, commit the transaction, and wakeup the cleaner thread to start
deleting snapshots, which means we were less likely to hit this problem.
You could still hit it if you had multiple snapshots to be deleted and
ended up with lots of delayed items, but it was definitely harder.

Fix for now by simply running all the delayed items before starting to
drop the snapshot.  We could make this smarter in the future by making
the delayed items per-root, and then simply drop any delayed items for
roots that we are going to delete.  But for now just a quick and easy
solution is the safest.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 41bd60676923822de1df2c50b3f9a10171f4338a upstream.

The log tree has a long standing problem that when a file is fsync'ed we
only check for new ancestors, created in the current transaction, by
following only the hard link for which the fsync was issued. We follow the
ancestors using the VFS' dget_parent() API. This means that if we create a
new link for a file in a directory that is new (or in an any other new
ancestor directory) and then fsync the file using an old hard link, we end
up not logging the new ancestor, and on log replay that new hard link and
ancestor do not exist. In some cases, involving renames, the file will not
exist at all.

Example:

  mkfs.btrfs -f /dev/sdb
  mount /dev/sdb /mnt

  mkdir /mnt/A
  touch /mnt/foo
  ln /mnt/foo /mnt/A/bar
  xfs_io -c fsync /mnt/foo

  <power failure>

In this example after log replay only the hard link named 'foo' exists
and directory A does not exist, which is unexpected. In other major linux
filesystems, such as ext4, xfs and f2fs for example, both hard links exist
and so does directory A after mounting again the filesystem.

Checking if any new ancestors are new and need to be logged was added in
2009 by commit 12fcfd22 ("Btrfs: tree logging unlink/rename fixes"),
however only for the ancestors of the hard link (dentry) for which the
fsync was issued, instead of checking for all ancestors for all of the
inode's hard links.

So fix this by tracking the id of the last transaction where a hard link
was created for an inode and then on fsync fallback to a full transaction
commit when an inode has more than one hard link and at least one new hard
link was created in the current transaction. This is the simplest solution
since this is not a common use case (adding frequently hard links for
which there's an ancestor created in the current transaction and then
fsync the file). In case it ever becomes a common use case, a solution
that consists of iterating the fs/subvol btree for each hard link and
check if any ancestor is new, could be implemented.

This solves many unexpected scenarios reported by Jayashree Mohan and
Vijay Chidambaram, and for which there is a new test case for fstests
under review.

Fixes: 12fcfd22 ("Btrfs: tree logging unlink/rename fixes")
CC: stable@vger.kernel.org # 4.4+
Reported-by: NVijay Chidambaram <vvijay03@gmail.com>
Reported-by: NJayashree Mohan <jayashree2912@gmail.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 27a7ff554e8d349627a90bda275c527b7348adae upstream.

The test case btrfs/001 with inode_cache mount option will encounter the
following warning:

  WARNING: CPU: 1 PID: 23700 at fs/btrfs/inode.c:956 cow_file_range.isra.19+0x32b/0x430 [btrfs]
  CPU: 1 PID: 23700 Comm: btrfs Kdump: loaded Tainted: G        W  O      4.20.0-rc4-custom+ #30
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:cow_file_range.isra.19+0x32b/0x430 [btrfs]
  Call Trace:
   ? free_extent_buffer+0x46/0x90 [btrfs]
   run_delalloc_nocow+0x455/0x900 [btrfs]
   btrfs_run_delalloc_range+0x1a7/0x360 [btrfs]
   writepage_delalloc+0xf9/0x150 [btrfs]
   __extent_writepage+0x125/0x3e0 [btrfs]
   extent_write_cache_pages+0x1b6/0x3e0 [btrfs]
   ? __wake_up_common_lock+0x63/0xc0
   extent_writepages+0x50/0x80 [btrfs]
   do_writepages+0x41/0xd0
   ? __filemap_fdatawrite_range+0x9e/0xf0
   __filemap_fdatawrite_range+0xbe/0xf0
   btrfs_fdatawrite_range+0x1b/0x50 [btrfs]
   __btrfs_write_out_cache+0x42c/0x480 [btrfs]
   btrfs_write_out_ino_cache+0x84/0xd0 [btrfs]
   btrfs_save_ino_cache+0x551/0x660 [btrfs]
   commit_fs_roots+0xc5/0x190 [btrfs]
   btrfs_commit_transaction+0x2bf/0x8d0 [btrfs]
   btrfs_mksubvol+0x48d/0x4d0 [btrfs]
   btrfs_ioctl_snap_create_transid+0x170/0x180 [btrfs]
   btrfs_ioctl_snap_create_v2+0x124/0x180 [btrfs]
   btrfs_ioctl+0x123f/0x3030 [btrfs]

The file extent generation of the free space inode is equal to the last
snapshot of the file root, so the inode will be passed to cow_file_rage.
But the inode was created and its extents were preallocated in
btrfs_save_ino_cache, there are no cow copies on disk.

The preallocated extent is not yet in the extent tree, and
btrfs_cross_ref_exist will ignore the -ENOENT returned by
check_committed_ref, so we can directly write the inode to the disk.

Fixes: 78d4295b ("btrfs: lift some btrfs_cross_ref_exist checks in nocow path")
CC: stable@vger.kernel.org # 4.18+
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NLu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 05c49e6bc1e8866ecfd674ebeeb58cdbff9145c2 upstream.

In a secnario where balance and replace co-exists as below,

  - start balance
  - pause balance
  - start replace
  - reboot

and when system restarts, balance resumes first. Then the replace is
attempted to restart but will fail as the EXCL_OP lock is already held
by the balance. If so place the replace state back to
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state.

Fixes: 010a47bd ("btrfs: add proper safety check before resuming dev-replace")
CC: stable@vger.kernel.org # 4.18+
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0d228ece59a35a9b9e8ff0d40653234a6d90f61e upstream.

At the time of forced unmount we place the running replace to
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state, so when the system comes
back and expect the target device is missing.

Then let the replace state continue to be in
BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state instead of
BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED as there isn't any matching scrub
running as part of replace.

Fixes: e93c89c1 ("Btrfs: add new sources for device replace code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eafb27fa5283599ce6c5492ea18cf636a28222bb upstream.

Mediatek Preloader is a proprietary embedded boot loader for loading
Little Kernel and Linux into device DRAM.

This boot loader also handle firmware update. Mediatek Preloader will be
enumerated as a virtual COM port when the device is connected to Windows
or Linux OS via CDC-ACM class driver. When the USB enumeration has been
done, Mediatek Preloader will send out handshake command "READY" to PC
actively instead of waiting command from the download tool.

Since Linux 4.12, the commit "tty: reset termios state on device
registration" (93857edd) causes Mediatek
Preloader receiving some abnoraml command like "READYXX" as it sent.
This will be recognized as an incorrect response. The behavior change
also causes the download handshake fail. This change only affects
subsequent connects if the reconnected device happens to get the same minor
number.

By disabling the ECHO termios flag could avoid this problem. However, it
cannot be done by user space configuration when download tool open
/dev/ttyACM0. This is because the device running Mediatek Preloader will
send handshake command "READY" immediately once the CDC-ACM driver is
ready.

This patch wants to fix above problem by introducing "DISABLE_ECHO"
property in driver_info. When Mediatek Preloader is connected, the
CDC-ACM driver could disable ECHO flag in termios to avoid the problem.
Signed-off-by: NMacpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Reviewed-by: NJohan Hovold <johan@kernel.org>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9d81a1bc2c48ea9782e3e8b53875f419766ef47 upstream.

CSS_TASK_ITER_PROCS implements process-only iteration by making
css_task_iter_advance() skip tasks which aren't threadgroup leaders;
however, when an iteration is started css_task_iter_start() calls the
inner helper function css_task_iter_advance_css_set() instead of
css_task_iter_advance().  As the helper doesn't have the skip logic,
when the first task to visit is a non-leader thread, it doesn't get
skipped correctly as shown in the following example.

  # ps -L 2030
    PID   LWP TTY      STAT   TIME COMMAND
   2030  2030 pts/0    Sl+    0:00 ./test-thread
   2030  2031 pts/0    Sl+    0:00 ./test-thread
  # mkdir -p /sys/fs/cgroup/x/a/b
  # echo threaded > /sys/fs/cgroup/x/a/cgroup.type
  # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type
  # echo 2030 > /sys/fs/cgroup/x/a/cgroup.procs
  # cat /sys/fs/cgroup/x/a/cgroup.threads
  2030
  2031
  # cat /sys/fs/cgroup/x/cgroup.procs
  2030
  # echo 2030 > /sys/fs/cgroup/x/a/b/cgroup.threads
  # cat /sys/fs/cgroup/x/cgroup.procs
  2031
  2030

The last read of cgroup.procs is incorrectly showing non-leader 2031
in cgroup.procs output.

This can be fixed by updating css_task_iter_advance() to handle the
first advance and css_task_iters_tart() to call
css_task_iter_advance() instead of the inner helper.  After the fix,
the same commands result in the following (correct) result:

  # ps -L 2062
    PID   LWP TTY      STAT   TIME COMMAND
   2062  2062 pts/0    Sl+    0:00 ./test-thread
   2062  2063 pts/0    Sl+    0:00 ./test-thread
  # mkdir -p /sys/fs/cgroup/x/a/b
  # echo threaded > /sys/fs/cgroup/x/a/cgroup.type
  # echo threaded > /sys/fs/cgroup/x/a/b/cgroup.type
  # echo 2062 > /sys/fs/cgroup/x/a/cgroup.procs
  # cat /sys/fs/cgroup/x/a/cgroup.threads
  2062
  2063
  # cat /sys/fs/cgroup/x/cgroup.procs
  2062
  # echo 2062 > /sys/fs/cgroup/x/a/b/cgroup.threads
  # cat /sys/fs/cgroup/x/cgroup.procs
  2062
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: N"Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Fixes: 8cfd8147 ("cgroup: implement cgroup v2 thread support")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fa4600734b74f74d9169c3015946d4722f8bcf79 upstream.

crypto_cfb_decrypt_segment() incorrectly XOR'ed generated keystream with
IV, rather than with data stream, resulting in incorrect decryption.
Test vectors will be added in the next patch.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7da66670775d201f633577f5b15a4bbeebaaa2b0 upstream.

Add AES128/192/256-CFB testvectors from NIST SP800-38A.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c35828ea906a7c76632a0211e59c392903cd4615 upstream.

Immediate packets sent to hardware should include the work
request length in calculating the flits. WR occupy one flit and
if not accounted result in invalid request which stalls the HW
queue.

Cc: stable@vger.kernel.org
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7172122be6a4712d699da4d261f92aa5ab3a78b8 upstream.

In crypto_alloc_context(), a DMA pool is allocated through dma_pool_alloc()
to hold the crypto context. The meta data of the DMA pool, including the
pool used for the allocation 'ndev->ctx_pool' and the base address of the
DMA pool used by the device 'dma', are then stored to the beginning of the
pool. These meta data are eventually used in crypto_free_context() to free
the DMA pool through dma_pool_free(). However, given that the DMA pool can
also be accessed by the device, a malicious device can modify these meta
data, especially when the device is controlled to deploy an attack. This
can cause an unexpected DMA pool free failure.

To avoid the above issue, this patch introduces a new structure
crypto_ctx_hdr and a new field chdr in the structure nitrox_crypto_ctx hold
the meta data information of the DMA pool after the allocation. Note that
the original structure ctx_hdr is not changed to ensure the compatibility.

Cc: <stable@vger.kernel.org>
Signed-off-by: NWenwen Wang <wang6495@umn.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 65b6657672388b72822e0367f06d41c1e3ffb5bb upstream.

Allwinner H6 SoC has multiplier N range between 1 and 254. Since parent
rate is 24MHz, intermediate result when calculating final rate easily
overflows 32 bit variable.

Because of that, introduce function for calculating clock rate which
uses 64 bit variable for intermediate result.

Fixes: 6174a1e2 ("clk: sunxi-ng: Add N-M-factor clock support")
Fixes: ee28648c ("clk: sunxi-ng: Remove the use of rational computations")

CC: <stable@vger.kernel.org>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8b19faf6fae2867e2c177212c541e8ae36aa4d32 upstream.

Fix typo in common_clk_branches.
Make spdif_pre parent of spdif_frac.

Fixes: 66746420 ("clk: rockchip: include downstream muxes into fractional dividers")
Cc: stable@vger.kernel.org
Signed-off-by: NJohan Jonker <jbx9999@hotmail.com>
Acked-by: NElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56c1723426d3cfd4723bfbfce531d7b38bae6266 upstream.

The IRQ handler bcm2835_spi_interrupt() first reads as much as possible
from the RX FIFO, then writes as much as possible to the TX FIFO.
Afterwards it decides whether the transfer is finished by checking if
the TX FIFO is empty.

If very few bytes were written to the TX FIFO, they may already have
been transmitted by the time the FIFO's emptiness is checked.  As a
result, the transfer will be declared finished and the chip will be
reset without reading the corresponding received bytes from the RX FIFO.

The odds of this happening increase with a high clock frequency (such
that the TX FIFO drains quickly) and either passing "threadirqs" on the
command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ
handler may be preempted between filling the TX FIFO and checking its
emptiness).

Fix by instead checking whether rx_len has reached zero, which means
that the transfer has been received in full.  This is also more
efficient as it avoids one bus read access per interrupt.  Note that
bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine
whether the transfer has finished.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Fixes: e34ff011 ("spi: bcm2835: move to the transfer_one driver model")
Cc: stable@vger.kernel.org # v4.1+
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dbc944115eed48af110646992893dc43321368d8 upstream.

If submission of a DMA TX transfer succeeds but submission of the
corresponding RX transfer does not, the BCM2835 SPI driver terminates
the TX transfer but neglects to reset the dma_pending flag to false.

Thus, if the next transfer uses interrupt mode (because it is shorter
than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout,
dmaengine_terminate_all() will be called both for TX (once more) and
for RX (which was never started in the first place).  Fix it.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Cc: stable@vger.kernel.org # v4.2+
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e82b0b3828451c1cd331d9f304c6078fcd43b62e upstream.

If a DMA transfer finishes orderly right when spi_transfer_one_message()
determines that it has timed out, the callbacks bcm2835_spi_dma_done()
and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(),
potentially leading to double termination.

Prevent by atomically changing the dma_pending flag before calling
dmaengine_terminate_all().
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Cc: stable@vger.kernel.org # v4.2+
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Martin Sperl <kernel@martin.sperl.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 18f2c4fcebf2582f96cbd5f2238f4f354a0e4847 upstream.

If the file system has been shut down or is read-only, then
ext4_write_inode() needs to bail out early.

Also use jbd2_complete_transaction() instead of ext4_force_commit() so
we only force a commit if it is needed.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fde872682e175743e0c3ef939c89e3c6008a1529 upstream.

Some time back, nfsd switched from calling vfs_fsync() to using a new
commit_metadata() hook in export_operations().  If the file system did
not provide a commit_metadata() hook, it fell back to using
sync_inode_metadata().  Unfortunately doesn't work on all file
systems.  In particular, it doesn't work on ext4 due to how the inode
gets journalled --- the VFS writeback code will not always call
ext4_write_inode().

So we need to provide our own ext4_nfs_commit_metdata() method which
calls ext4_write_inode() directly.

Google-Bug-Id: 121195940
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>