- 24 7月, 2011 19 次提交
-
-
由 Kay Sievers 提交于
Userspace wants to manage module parameters with udev rules. This currently only works for loaded modules, but not for built-in ones. To allow access to the built-in modules we need to re-trigger all module load events that happened before any userspace was running. We already do the same thing for all devices, subsystems(buses) and drivers. This adds the currently missing /sys/module/<name>/uevent files to all module entries. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (split & trivial fix)
-
由 Kay Sievers 提交于
This simplifies the next patch, where we have an attribute on a builtin module (ie. module == NULL). Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (split into 2)
-
由 Jonas Bonn 提交于
This patch removes all the module loader hook implementations in the architecture specific code where the functionality is the same as that now provided by the recently added default hooks. Signed-off-by: NJonas Bonn <jonas@southpole.se> Acked-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Jonas Bonn 提交于
The module loader code allows architectures to hook into the code by providing a small number of entry points that each arch must implement. This patch provides __weakly linked generic implementations of these entry points for architectures that don't need to do anything special. Signed-off-by: NJonas Bonn <jonas@southpole.se> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Satoru Moriya 提交于
In STANDARD_PARAM_DEF, param_set_* handles the case in which strtolfn returns -EINVAL but it may return -ERANGE. If it returns -ERANGE, param_set_* may set uninitialized value to the paramerter. We should handle both cases. The one of the cases in which strtolfn() returns -ERANGE is following: *Type of module parameter is long *Set the parameter more than LONG_MAX Signed-off-by: NSatoru Moriya <satoru.moriya@hds.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (43 commits) Blackfin: spi-docs: further clarify GPIO CS behavior with various modes Blackfin: boards: fix pcm device name Blackfin: SMP: punt unused atomic_test_mask helper Blackfin: irqs: do not trace arch_local_{*,irq_*} functions Blackfin: bf526: restrict reboot workaround to 0.0 silicon Blackfin: bf51x: fix alternative portmux options Blackfin: bf54x: fix GPIO resume code Blackfin: dpmc: optimize SDRAM programming slightly Blackfin: dpmc: don't save/restore scratch registers Blackfin: bf538: pull gpio/port logic out of core hibernate paths Blackfin: dpmc: optimize hibernate/resume path Blackfin: dpmc: do not save/restore EVT0/EVT1/EVT4 when hibernating Blackfin: dpmc: relocate hibernate helper macros Blackfin: dpmc: omit RETE/RETN when hibernating Blackfin: dpmc: optimize SIC_IWR programming a little Blackfin: gpio/ints: generalize pint logic Blackfin: dpmc: bind to MMR names and not CPUs Blackfin: debug-mmrs: generalize pint logic Blackfin: bf54x: switch to common pint MMR struct Blackfin: bf54x: tweak MMR pint names ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regulator: Convert tps65023 to use regmap API regmap: Add SPI bus support regmap: Add I2C bus support regmap: Add generic non-memory mapped register access API
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits) [SCSI] fix crash in scsi_dispatch_cmd() [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu [SCSI] bfa: Update the driver version to 3.0.2.1 [SCSI] bfa: Driver and BSG enhancements. [SCSI] bfa: Added support to query PHY. [SCSI] bfa: Added HBA diagnostics support. [SCSI] bfa: Added support for flash configuration [SCSI] bfa: Added support to obtain SFP info. [SCSI] bfa: Added support for CEE info and stats query. [SCSI] bfa: Extend BSG interface. [SCSI] bfa: FCS bug fixes. [SCSI] bfa: DMA memory allocation enhancement. [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support. [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes. [SCSI] bfa: Added Fabric Assigned Address(FAA) support [SCSI] bfa: IOC bug fixes. [SCSI] bfa: Enable ASIC block configuration and query. [SCSI] bnx2i: Updated copyright and bump version [SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported ... Fix up some trivial conflicts in: - drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}: Crazy broadcom version number conflicts - drivers/target/tcm_fc/tfc_cmd.c Just trivial cleanups done on adjacent lines
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (297 commits) ALSA: asihpi - Replace with snd_ctl_boolean_mono_info() ALSA: asihpi - HPI version 4.08 ALSA: asihpi - Add volume mute controls ALSA: asihpi - Control name updates ALSA: asihpi - Use size_t for sizeof result ALSA: asihpi - Explicitly include mutex.h ALSA: asihpi - Add new node and message defines ALSA: asihpi - Make local function static ALSA: asihpi - Fix minor typos and spelling ALSA: asihpi - Remove unused structures, macros and functions ALSA: asihpi - Remove spurious adapter index check ALSA: asihpi - Revise snd_pcm_debug_name, get rid of DEBUG_NAME macro ALSA: asihpi - DSP code loader API now independent of OS ALSA: asihpi - Remove controlex structs and associated special data transfer code ALSA: asihpi - Increase request and response buffer sizes ALSA: asihpi - Give more meaningful name to hpi request message type ALSA: usb-audio - Add quirk for Roland / BOSS BR-800 ALSA: hda - Remove a superfluous argument of via_auto_init_output() ALSA: hda - Fix indep-HP path (de-)activation for VT1708* codecs ALSA: hda - Add documentation for codec-specific mixer controls ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: net/9p: Fix the msize calculation. fs/9p: add 9P2000.L unlinkat operation fs/9p: add 9P2000.L renameat operation fs/9p: Always ask new inode in create fs/9p: Clean-up get_protocol_version() to use strcmp fs/9p: Fix invalid mount options/args fs/9p: When doing inode lookup compare qid details and inode mode bits. fs/9p: Fid is not valid after a failed clunk. net/9p: Remove structure not used in the code VirtIO can transfer VIRTQUEUE_NUM of pages. Fix the size of receive buffer packing onto VirtIO ring. 9p: clean up packet dump code fs/9p: remove rename work around in 9p net/9p: fix client code to fail more gracefully on protocol error
-
由 Borislav Petkov 提交于
Refresh sysctl/kernel.txt. More specifically, - drop stale index entries - sync and sort index and entries - reflow sticking out paragraphs to colwidth 72 - correct typos - cleanup whitespace Signed-off-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanlong Gao 提交于
Only the root cpuset has cpuset.memory_pressure_enabled flag, but not the only one. Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NPaul Menage <menage@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanlong Gao 提交于
Must echo a task id to the cgroups' tasks file, but not to a directory. Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: NPaul Menage <menage@google.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branches 'x86-detect-hyper-for-linus', 'x86-fpu-for-linus', 'x86-kexec-for-linus', 'x86-platform-for-linus', 'x86-quirks-for-linus', 'x86-tsc-for-linus' and 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-detect-hyper-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hyper: Change hypervisor detection order * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix DNA exception during check_fpu() * 'x86-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kexec, x86: Fix incorrect jump back address if not preserving context * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, config: Introduce an INTEL_MID configuration * 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, quirks: Use pci_dev->revision * 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: tsc: Remove unneeded DMI-based blacklisting * 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit
-
由 Linus Torvalds 提交于
Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, build: Do not set the root_dev field in bzImage
-
由 Linus Torvalds 提交于
Merge branch 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Add support for cmpxchg_double
-
由 Linus Torvalds 提交于
Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: apb: Share APB timer code with other platforms
-
由 Linus Torvalds 提交于
Merge branches 'x86-urgent-for-linus', 'core-debug-for-linus', 'irq-core-for-linus' and 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Make rwsem.S depend on CONFIG_RWSEM_XCHGADD_ALGORITHM * 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: debug: Make CONFIG_EXPERT select CONFIG_DEBUG_KERNEL to unhide debug options * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Remove unused CHECK_IRQ_PER_CPU() * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools, x86: Fix 32-bit compile on 64-bit system
-
由 James Bottomley 提交于
-
- 23 7月, 2011 21 次提交
-
-
msize represents the maximum PDU size that includes P9_IOHDRSZ. Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
unlinkat - Remove a directory entry size[4] Tunlinkat tag[2] dirfid[4] name[s] flag[4] size[4] Runlinkat tag[2] older Tremove have the below request format size[4] Tremove tag[2] fid[4] The remove message is used to remove a directory entry either file or directory The remove opreation is actually a directory opertation and should ideally have dirfid, if not we cannot represent the fid on server with anything other than name. We will have to derive the directory name from fid in the Tremove request. NOTE: The operation doesn't clunk the unlink fid. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
renameat - change name of file or directory size[4] Trenameat tag[2] olddirfid[4] oldname[s] newdirfid[4] newname[s] size[4] Rrenameat tag[2] older Trename have the below request format size[4] Trename tag[2] fid[4] newdirfid[4] name[s] The rename message is used to change the name of a file, possibly moving it to a new directory. The rename opreation is actually a directory opertation and should ideally have olddirfid, if not we cannot represent the fid on server with anything other than name. We will have to derive the old directory name from fid in the Trename request. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
This make sure we don't end up reusing the unlinked inode object. The ideal way is to use inode i_generation. But i_generation is not available in userspace always. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Prem Karat 提交于
Signed-off-by: NPrem Karat <prem.karat@linux.vnet.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Prem Karat 提交于
Without this fix, if any invalid mount options/args are passed while mouting the 9p fs, no error (-EINVAL) is returned and default arg value is assigned. This fix returns -EINVAL when an invalid arguement is found while parsing mount options. Signed-off-by: NPrem Karat <prem.karat@linux.vnet.ibm.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
This make sure we don't use wrong inode from the inode hash. The inode number of the file deleted is reused by the next file system object created and if we only use inode number for inode hash lookup we could end up with wrong struct inode. Also compare inode generation number. Not all Linux file system provide st_gen in userspace. So it could be 0; Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
free the fid even in case of failed clunk. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 jvrao 提交于
Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 jvrao 提交于
Signed-off-by: Venkateswararao Jujjuri "<jvrao@linux.vnet.ibm.com> Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
Switch to generic kernel hexdump library and cleanup macros to be more consistent with the way we do normal debug prints. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
Now that VFS does the right thing remove the work around. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Eric Van Hensbergen 提交于
There was a BUG_ON to protect against a bad id which could be dealt with more gracefully. Reported-by: NNatalie Orlin <norlin@us.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Mark Brown 提交于
There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Ohad Ben-Cohen 提交于
virtio has been so far used only in the context of virtualization, and the virtio Kconfig was sourced directly by the relevant arch Kconfigs when VIRTUALIZATION was selected. Now that we start using virtio for inter-processor communications, we need to source the virtio Kconfig outside of the virtualization scope too. Moreover, some architectures might use virtio for both virtualization and inter-processor communications, so directly sourcing virtio might yield unexpected results due to conflicting selections. The simple solution offered by this patch is to always source virtio's Kconfig in drivers/Kconfig, and remove it from the appropriate arch Kconfigs. Additionally, a virtio menu entry has been added so virtio drivers don't show up in the general drivers menu. This way anyone can use virtio, though it's arguably less accessible (and neat!) for virtualization users now. Note: some architectures (mips and sh) seem to have a VIRTUALIZATION menu merely for sourcing virtio's Kconfig, so that menu is removed too. Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Scott Jiang 提交于
The pcm driver name has been changed, but the device name has not. Signed-off-by: NScott Jiang <scott.jiang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-