Merge tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT Additions for 4.6" from Maxime Ripard:

Quite a few changes, among which:
  - Support for the A83t
  - Support for the eMMC DDR on a few boards
  - Support for the OTG controller on a few boards
  - New boards: Itead Ibox, Cubietruck plus, Homlet v2, Lamobo R1

* tag 'sunxi-dt-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (34 commits)
  ARM: dts: sun8i: Add leds and switch on Orangepi Plus boards
  ARM: dts: sun8i: Add ir receiver nodes to H3 dtsi
  ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
  dts: sun8i-h3: Add APB0 related clocks and resets
  ARM: dts: sun7i: Add dts file for the lamobo-r1 board
  ARM: dts: sun4i: Enable USB DRC on Hyundai-a7hd
  ARM: dts: sun4i: Enable USB DRC on the MK802
  ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
  ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes
  ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB
  ARM: dts: sun7i: Enable USB DRC on MK808C
  ARM: dts: sunxi: Fix #interrupt-cells for PIO in H3
  ARM: dts: sun8i-a83t: Correct low speed oscillator clocks
  ARM: dts: sun9i: a80-optimus: Remove i2c3 and uart4
  ARM: dts: sun4i: Itead Iteaduino to use common code
  ARM: dts: sun7i: Add Itead Ibox support
  ARM: dts: sunxi: Add sunxi-itead-core-common.dtsi
  ARM: dts: sun9i: cubieboard4: Enable hardware reset and HS-DDR for eMMC
  ARM: dts: sun9i: a80-optimus: Enable hardware reset and HS-DDR for eMMC
  ARM: dts: sun9i: Include SDC2_RST pin in mmc2_8bit_pins
  ...

Merge "mvebu dt for 4.6 (part 2)" from Gregory CLEMENT:

- Reorder Ethernet node on Armada 38x SoCs
- Add device tree for buffalo linkstation ls-gl
- Use the more accurate armada-370-sata string for SATA on Armada 375
- Add NAND description to Armada 370 DB and Armada XP DB

* tag 'mvebu-dt-4.6-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: mvebu: add NAND description to Armada 370 DB and Armada XP DB
  ARM: dts: armada-375: use armada-370-sata for SATA
  ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl
  ARM: dts: orion5x: split linkstation lswtgl into common and device parts
  ARM: dts: armada-38x: add reference to ETH connectors for A385-AP
  ARM: dts: armada-38x: change order of ethernet DT nodes on Armada 38x
  ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
  ARM: dts: kirkwood: use unique machine name for ds112

Merge tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.6" from
Simon Horman:

* Add L2 cache-controller nodes to r8a779[0134] and r8a73a4
* Add etheravb support to r8a7794
* Correct JP3 jumper description on Porter
* Enable thermal zone on  r8a779[013]
* Replace gpio-key, wakeup with wakeup-source property on r8a7794
* Use demuxer for IIC0/I2C0 on lager
* Use fallback etheravb, pci and pcie compatibility strings as appropriate

* tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7790: use fallback etheravb compatibility string
  ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
  ARM: dts: r8a7794: add EtherAVB support
  ARM: dts: r8a7794: add EtherAVB clock
  ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
  ARM: dts: r8a7794: Add L2 cache-controller node
  ARM: dts: r8a7793: Add L2 cache-controller node
  ARM: dts: r8a7791: Add L2 cache-controller node
  ARM: dts: r8a7790: Add L2 cache-controller nodes
  ARM: dts: r8a73a4: Add L2 cache-controller nodes
  ARM: dts: r8a7793: enable to use thermal-zone
  ARM: dts: r8a7791: enable to use thermal-zone
  ARM: dts: r8a7790: enable to use thermal-zone
  ARM: dts: porter: fix JP3 jumper description
  ARM: dts: r8a7794: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pci compatibility string
  ARM: dts: r8a7790: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pcie compatibility string
  ARM: dts: r8a7790: use fallback pcie compatibility string

This reverts commit 8ba671ef.

As reported by kbuild test robot <fengguang.wu@intel.com>:

   In file included from arch/arm/boot/dts/mt2701-evb.dts:16:0:
>> arch/arm/boot/dts/mt2701.dtsi:18:28: fatal error: mt2701-pinfunc.h: No such file or directory
    #include "mt2701-pinfunc.h"
                               ^
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge "Broadcom devicetree changes for 4.6" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree changes:

- Rafal adds a Device Tree for the D-Link DIR-885L router which is based on the
  BCM47094 SoC similar to the BCM4709

- Simran adds proper audio clock Device Tree nodes to the Cygnus platforms

- Martin adds the auxiliary SPI controllers, makes the UART naming convention
  more standard, and finally adds the auxiliary UART found in the BCM2835 to the
  BCM2835 Device Tree

- Remi adds PWM clock support to the BCM2835 Device Tree

- Lubomir adds a Device Tree for the Raspberry Pi Model A

- Alexander adds Device Tree information for the Raspberry Pi USB power domain

- Dhananjay enables the GPIO-A controller for the Northstar Plus SoCs

- Jon fixes the PCIE Device Tree nodes by pulling them out of the bus-level node,
  removes duplicate CPU definitions, adds PMU nodes, SP804 timers, and SP805 watchdog
  to the Northstar Plus SoCs

* tag 'arm-soc/for-4.6/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: bcm2835: add bcm2835-aux-uart support to DT
  ARM: dts: NSP: Add SP805 Support to DT
  ARM: dts: NSP: Add SP804 Support to DT
  ARM: dts: NSP: Add PMU Support to DT
  ARM: dts: NSP: Fix CPU DT issue
  ARM: dts: NSP: Fix PCIE DT issue
  ARM: dts: enable GPIO-a for Broadcom NSP
  ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.
  ARM: bcm2835: dt: Add Raspberry Pi Model A
  ARM: bcm2835: follow dt uart node-naming convention
  ARM: bcm2835: Add PWM clock support to the device tree
  ARM: bcm2835: add the auxiliary spi1 and spi2 to the device tree
  ARM: dts: Add audio clock to the existing Broadcom Cygnus clock DT
  ARM: BCM5301X: Add DT for D-Link DIR-885L

With the newly available MSIX driver for Alpine, add the corresponding
node in the Alpine device tree.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge "ARM: Xilinx Zynq dt patches for v4.6" from Michal Simek

- Add usb phy for Zybo
- Use earlycon instead of earlyprintk

* tag 'zynq-dt-for-4.6' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: Use earlycon instead of earlyprintk
  ARM: dts: zynq: Enable USB and USB PHY for ZYBO

Merge tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Merge "ARM: Keystone DTS for 4.6" from Santosh Shilimkar:

ARM: DTS: Add new bindings for K2G and the K2G evm

K2G SoC family is the newest version of the Keystone family of processors.

The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf

* tag 'keystone_dts_for_4.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: Add minimum support for K2G evm
  ARM: dts: keystone: Add Initial DT support for TI K2G SoC family
  ARM: keystone: Create new binding for K2G SoC

Merge tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.6 merge window. Mostly just
adding board specific devices and few new boards:

- N900 improvments for adp1653 and gpio keys

- Add missing bandgap data for omap3

- Add more devices for compulab cm-t335

- Add n950 WLAN support, enable modem, add pinctrl for SSI

- Correct dm814x and dra62x auxclk rate, add support for GPMC and NAND

- Add syscon node for PHY's on dra7

- Add support more devices on logicpd torpedo

- Add USB host support for igep and specify boot console

- Fix audio clock for am335x-sl50 and specify boot console

- Remove deprecated tx-fifo-resize for dwc3 that was only used on
  omap5 es1.0

- Add dra7 thermal data

- Update am43x-epos-evm compatible string to am438

- Add support for logicpd dm3730 som-lv

* tag 'omap-for-v4.6/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits)
  ARM: dts: am57xx-beagle-x15: Add eeprom information
  ARM: dts: Add HSUSB2 EHCI Support to Logic PD DM37xx SOM-LV
  ARM: dts: n900: Use linux input defines instead hardcoded constants
  ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV
  ARM: dts: omap3logic: Add PWM-Backlight
  ARM: dts: omap3-n900: Allow gpio keys to be disabled
  ARM: dts: am43x-epos-evm: Add the am438 compatible string
  ARM: dts: DRA7: Add missing IVA and DSPEVE thermal domain data
  ARM: dts: DRA7: Add IVA thermal data
  ARM: dts: DRA7: Add DSPEVE thermal data
  ARM: dts: remove deprecated property dwc3
  ARM: dts: OMAP3-N950-N9: Add ssi idle pinctrl state
  ARM: dts: am335x-sl50: Fix audio codec setup.
  ARM: dts: am335x-sl50: Specify the device to be used for boot console output.
  ARM: dts: omap3-igep0030-common: Add USB Host support
  ARM: dts: igep00x0: Specify the device to be used for boot console output.
  ARM: dts: LogicPD Torpedo: Set HSUSB0 Pin Mux
  ARM: dts: OMAP3-N950-N9: Enable modem
  ARM: dts: OMAP3-N950-N9: Enable SSI module
  ARM: dts: LogicPD Torpedo: Add SPI EEPROM
  ...

Merge "ARM: mediatek: dts updates for v4.6" from Matthias Brugger:

Add support for mt7623 SoC.
Enable SMP support for mt7623.
Enable SMP support for mt2701
Add pinctrl for mt2701

* tag 'v4.5-next-dts' of https://github.com/mbgg/linux-mediatek:
  arm: dts: Add pinctrl/GPIO/EINT node for mt2701
  ARM: dts: mt2701: enable basic SMP bringup for mt2701
  ARM: dts: mt7623: enable SMP bringup
  ARM: dts: mediatek: add MT7623 basic support
  Document: DT: Add bindings for mediatek MT7623 SoC Platform

OrangePi Plus board has dwo leds - green ("pwr") and red ("status")
and a switch ("sw4"). This patch describes them in a devicetree.
Signed-off-by: NKrzysztof Adamski <k@japko.eu>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The H3 ir receiver is completely compatible with the one found in the A31.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Add the corresponding device node for R_PIO on H3 to the dtsi. Support
for the controller was added in earlier commit.
Signed-off-by: NKrzysztof Adamski <k@japko.eu>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

APB0 is bearly mentioned in H3 User Manual and it is only setup in the
Allwinners kernel dump for CIR. I have verified experimentally that the
gate for R_PIO exists and works, though. There are probably other gates
there but I don't know their order right now and I don't have access to
their peripherals on my board to test them.

After some experiments and reviewing how this is organized on other
sunxi SoCs, I couldn't actually find any way to disable clocks for R_PIO
and they are working properly without doing anything so I assume they
are connected straight to the 24Mhz oscillator for now.
Signed-off-by: NKrzysztof Adamski <k@japko.eu>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
on the PCB, is meant as a A20 based router board. As such the board comes
with a built-in switch chip giving it 5 gigabit ethernet ports, and it
has a large empty area on the pcb with mounting holes which will fit a
2.5 inch harddisk. To complete its networking features it has a
Realtek RTL8192CU for WiFi 802.11 b/g/n.
Signed-off-by: NJelle de Jong <jelledejong@powercraft.nl>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

Add barebones K2G evm dts. This DTS allows the board to boot using a
ram based filesystem.

The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdfSigned-off-by: NVitaly Andrianov <vitalya@ti.com>
Signed-off-by: NFranklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

K2G is the newest addition of TI's Keystone 2 product family. It is a
single core Cortex A15 and a C66x DSP.

K2G supports standard peripherals such as SPI, UART, MMC and USB 2.0.

Includes two dual-core Programmable Real-time Unit and Industrial
Communication Subsystems (PRU-ICSS).

The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf

This device is targeted for a variety of applications which include, but
are not limited to:

Home audio
Professional audio
Industrial Programmable Logic Control

The peripheral nodes that have been included in this patch have been
tested during bring-up. Since all peripherals will not necessarily be
used on all boards, disable all peripherals by default. This allow
the board dts to selectively choose which peripherals it wants to
enable.

This SoC now uses the next generation of power management architecture
with the PM functionality located in a microcontroller embedded in the SOC.

Support for this new PM architecture along with other peripherals will be
added in future patches.
Signed-off-by: NVitaly Andrianov <vitalya@ti.com>
Signed-off-by: NFranklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

K2G SoC family is the newest version of the Keystone family of processors.

The technical reference manual for K2G can be found here:
http://www.ti.com/lit/ug/spruhy8/spruhy8.pdf

Add new bindings for K2G and the K2G evm. Also document these new bindings.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NFranklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

Use early console instead of earlyprintk which is supposed to use for
very early debugging (DEBUG_LL).
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Use recently added fallback compatibility string in r8a7790 device tree.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Make it possible to select which I2C IP core you want to run on the
EXIO-A connector. This is the reference how to use this feature. Update
the copyright while we are here.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Merge tag 'at91-ab-4.6-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

DT changes for 4.6:
 - Addition of the ADC for sama5d2 and sama5d2_xplained

* tag 'at91-ab-4.6-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: sama5d2 Xplained: enable the adc device
  ARM: dts: at91: sama5d2: add adc device
Signed-off-by: NOlof Johansson <olof@lixom.net>

The patch adds LS2085a to PCIe compatible to fix the compatibility
issue when using firmware with LS2085a compatible property.
Signed-off-by: NMinghuan Lian <minghuan.lian@nxp.com>
Signed-off-by: NMingkai Hu <mingkai.hu@nxp.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'versatile-dt-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Versatile DT cleanups from Linus Walleij:

"this is a first pull request for my cleanups for the Versatile, as
the finished stuff should not be sitting in my tree but in ARM SoC.
This completes the ARM RealView PB1176 and PB11MPCore device trees,
and moves the Versatile to use power/reset.

The idea is to keep working on this cleanup branch and send additional
patches on top of this one as the prerequisites are merged into the MTD
and FBDEV subsystems. So please create a special versatile cleanup branch
(or suggest another approach).

As it happens, board files and device trees need to change at the same
time to make logical sense, especially for Versatile where auxdata is
replaced with DT entries, such as when reset is moved in the last patch
in this set. The MTD and CLCD changes will share this characteristic."

Versatile family cleanups step 1:
- Finalize RealView the PB1176 and PB11MPCore device trees
- Move Versatile to use the power/reset driver instead of a
  custom restart hook

* tag 'versatile-dt-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: versatile: move restart to the device tree
  ARM: realview: add the DS1338 RTC to PB1176 DT
  ARM: pb1176: add ethernet to devicetree
  ARM: pb1176: add ISP1761 USB OTG host controller
  ARM: pb1176: add AACI to the device tree
  ARM: pb1176: add ICST307 clocks to the device tree
  ARM: realview: fix up PB11MP flash compat strings
  ARM: realview: add flash devices to the PB1176 DTS
Signed-off-by: NOlof Johansson <olof@lixom.net>

Samsung DeviceTree updates and improvements for v4.6:
1. Add SROM controller device nodes.
2. Add Ethernet chip as child of SROM controller on SMDK5410.
3. Allow simultaneous usage exynos-rng and s5p-sss drivers on Exynos5.
4. Cleanup CPU configuration on Exynos542x/5800.
5. Add necessary nodes for cpufreq-dt driver on Exynos542x/5800 (OPPs,
   regulator supplies) which allows frequency and voltage scalling
   of this SoC.
6. Minor cleanups.

* tag 'samsung-dt-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: Replace legacy *,wakeup property with wakeup-source for exynos boards
  ARM: dts: Add GSCL block parent clock management to pm domain on exynos542x
  ARM: dts: Extend existing CPU OPP for exynos5800
  ARM: dts: Add CPU OPP properties for exynos542x/5800
  ARM: dts: Add cluster regulator supply properties for exynos542x/5800
  ARM: dts: Make CPU configuration more readable on exynos542x/5800
  ARM: dts: Replace legacy *,wakeup property with wakeup-source on s5pv210
  ARM: dts: Allow simultaneous usage exynos-rng and s5p-sss drivers on exynos5
  ARM: dts: Add Ethernet chip to exynos5410-smdk5410
  ARM: dts: Add SROM to exynos5410
  ARM: dts: Add SROM device node for exynos5
  ARM: dts: Add SROM device node for exynos4
  ARM: dts: Add pinctrl support to exynos5410
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.6

* Use SCIF and USBHS fallback compatibility strings
* Add Baud Rate Generator (BRG) support for (H)SCIF
* Enable SCIF_CLK frequency and pins
* Use GIC_* defines
* Enable audio on r8a7793/gose
* Enable HDMI vidio out on r8a7793
* Enable i2c on r8a7793/gose
* Enable QSPI on alt
* Enable GPIO keys and leds on gise
* Enable audio on porter
* Enable DU on porter

* tag 'renesas-dt-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (68 commits)
  ARM: dts: silk: Enable SCIF_CLK frequency and pins
  ARM: dts: porter: Enable SCIF_CLK frequency and pins
  ARM: dts: marzen: Enable SCIF_CLK frequency and pins
  ARM: dts: lager: Enable SCIF_CLK frequency and pins
  ARM: dts: koelsch: Enable SCIF_CLK frequency and pins
  ARM: dts: gose: Enable SCIF_CLK frequency and pins
  ARM: dts: bockw: Enable SCIF_CLK frequency and pins
  ARM: dts: alt: Enable SCIF_CLK frequency and pins
  ARM: dts: r8a7794: Add BRG support for (H)SCIF
  ARM: dts: r8a7793: Add BRG support for SCIF
  ARM: dts: r8a7791: Add BRG support for (H)SCIF
  ARM: dts: r8a7790: Add BRG support for (H)SCIF
  ARM: dts: r8a7779: Add BRG support for SCIF
  ARM: dts: r8a7778: Add BRG support for SCIF
  ARM: dts: r8a7794: Rename the serial port clock to fck
  ARM: dts: r8a7793: Rename the serial port clock to fck
  ARM: dts: r8a7791: Rename the serial port clock to fck
  ARM: dts: r8a7790: Rename the serial port clock to fck
  ARM: dts: r8a7779: Rename the serial port clock to fck
  ARM: dts: r8a7778: Rename the serial port clock to fck
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Signed-off-by: NLars Persson <larper@axis.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Initial device tree for the Artpec-6 SoC.
Signed-off-by: NLars Persson <larper@axis.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This adds device tree bindings for the Artpec-6 SoC.
Signed-off-by: NLars Persson <larper@axis.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Assorted bunch of 32bit Rockchip devicetree changes. More clocks,
nodes and fixes like the increased drive-strength on the firefly.
Most interesting is maybe the enablement of the pl330 option
for handling the broken flushp operation that is present on the
current Rockchip SoCs. Together with the driver-side enablement
this should give us working dma finally.

* tag 'v4.6-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (30 commits)
  ARM: dts: cros-ec-keyboard: Add LOCK key to keyboard matrix
  ARM: dts: rockchip: replace gpio-key,wakeup with wakeup-source property
  ARM: dts: rockchip: add arm,pl330-broken-no-flushp quirk for rk3036 SoCs
  ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3xxx platform
  ARM: dts: rockchip: Add arm, pl330-broken-no-flushp quirk for rk3288 platform
  dt-bindings: rockchip-dw-mshc: add RK3036 dw-mshc description
  ARM: dts: rockchip: increase the mclk_fs to 512 for kylin board
  ARM: dts: rockchip: support the spi for rk3036
  ARM: dts: rockchip: add mclk for rt5616 on rk3036 kylin board
  ARM: dts: rockchip: add the leds control for rk3036-kylin board
  ARM: dts: rockchip: add tsadc node
  clk: rockchip: Add new id for rk3066 tsadc clock
  ARM: dts: rockchip: add clock-cells for usb phy nodes
  ARM: dts: rockchip: Assign RK3288 EDP_24M input centrally
  ARM: dts: rockchip: add soc-specific compatibles for rk3036 SoCs
  ARM: dts: rockchip: Bump sd card pin drive strength up on firefly boards
  dt-bindings: rockchip-dw-mshc: add RK3368 dw-mshc description
  ARM: dts: rockchip: Add the SDIO wifi on Radxa Rock2 square
  ARM: dts: rockchip: Add the iodomains for the Rock2 SOM
  ARM: dts: rockchip: add rk3288 mipi_dsi nodes
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/dt

Highlights:
-----------
 - Add DMA controller node to stm32f429 MCU
 - Add pinctrl & gpio nodes to stm32f429 MCU
 - Remap stm32429-eval board SD-Ram to 0x0 for performance boost

* tag 'stm32-dt-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
  ARM: dts: stm32f429: Boost perfs by remapping SDRAM Bank 1 to 0x0
  ARM: dts: Add leds support to STM32F429 boards
  ARM: dts: Add USART1 pin config to STM32F429 boards
  ARM: dts: Add pinctrl node to STM32F429
  includes: dt-bindings: Add STM32F429 pinctrl DT bindings
  ARM: dts: Add STM32 DMA support for STM32F429 MCU
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt

Few updates for ARM VExpress/Juno platforms

1. GICv3 support on Foundation models

2. Support for Juno R2 board

3. Support for ARM HDLCD on all Juno platforms

* tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: Add HDLCD support on Juno platforms
  Documentation: drm: Add DT bindings for ARM HDLCD
  arm64: dts: Add support for Juno r2 board
  arm64: dts: move juno pcie-controller to base file
  arm64: dts: add .dts for GICv3 Foundation model
  arm64: dts: split Foundation model dts to put the GIC separately
  arm64: dts: Foundation model: increase GICC region to allow EOImode=1
  arm64: dts: prepare foundation-v8.dts to cope with GICv3
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge DT changes for lpc32xx from Vladimir Zapolskiy:

"The changes add description of clock providers and clock consumers,
define default irq types of SoC controllers and add PHY3250 board
regulators.

I'm adding an official LPC32xx maintainer Roland to Cc, however he seems
to be unresponsive for a quite long time (since 2014)."

* 'lpc32xx/dt' of https://github.com/vzapolskiy/linux:
  arm: dts: phy3250: add SD fixed regulator
  arm: dts: phy3250: add lcd and backlight fixed regulators
  arm: dts: lpc32xx: assign interrupt types
  arm: dts: lpc32xx: remove clock frequency property from UART device nodes
  arm: dts: lpc32xx: add USB clock controller
  arm: dts: lpc32xx: add clock properties to device nodes
  arm: dts: lpc32xx: add clock controller device node
  arm: dts: lpc32xx: add device nodes for external oscillators
  dt-bindings: create arm/nxp folder and move LPC32xx SoC description to it
Signed-off-by: NOlof Johansson <olof@lixom.net>

Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy
"gpio-key,wakeup" boolean property to enable gpio buttons as wakeup
source.

Few dts files assign value "1" to gpio-key,wakeup which is incorrect.
Since the presence of the boolean property indicates it is enabled,
value of "0" or "1" have no significance.

This patch replaces the legacy "gpio-key,wakeup" with the unified
"wakeup-source" property which inturn fixes the above mentioned issue.
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

mvebu dt for 4.6 (part 1)

- Improve Armada 38x device tree (SATA and XHCI)
- Fix SD Card and audio support for OpenRD board
- Provide template for RS-232/485 configuration for the same board
- Use a common dtsi file for linkstation boards
- Add support for Buffalo Linkstation LS-QVL

* tag 'mvebu-dt-4.6-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: add device tree for buffalo linkstation ls-qvl
  ARM: dts: kirkwood: fix audio for OpenRD clients
  ARM: dts: kirkwood: provide template for RS-232/485 configuration for OpenRD
  ARM: dts: kirkwood: split lswvl dts to linkstation lsvl and lswvl
  ARM: dts: kirkwood: split lswxl dts to linkstation lswsxl and lswxl
  ARM: dts: kirkwood: relicense dts of ls-wvl/vl and ls-wxl/wsxl under GPLv2/X11
  ARM: dts: kirkwood: fix SD slot default configuration for OpenRD
  ARM: dts: kirkwood: fix pin names for UART/SD selection for OpenRD
  ARM: dts: armada-370: Update the mpp63 function in the device tree on Armada 370
  ARM: dts: armada-38x: use usb-nop-xceiv PHY for the xhci nodes on Armada 388 GP
  ARM: dts: armada-38x: use regulator-boot-on for SATA regulators on Armada 388 GP
  ARM: dts: armada-38x: adjust board name and compatible for Armada 388 GP
Signed-off-by: NOlof Johansson <olof@lixom.net>

Add EEPROM at 0x50 that describes the board configuration.
This is useful for userspace programs that may need to check board
revision and other similar information.
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The Logic PD SOM-LV has a USB Host Controller connected to 3-port
hub.  This enables the pin muxing for the host controller and
ehci-phy.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This makes DTS structure more readable.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Acked-By: NSebastian Reichel <sre@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The Logic PD DM37xx SOM-LV devkit consists of a base board and a SOM.
While the SOM (System on Module) supports Bluetooth and WiFi, LPD did not
obtain an FCC ID, so anyone who uses it will have to go through certification.

I have only tested the Type 28 Display, SMSC9211 Ethernet, SD/MMC and basic
power management, however the overall current seems high.
Signed-off-by: NAdam Ford <aford173@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>