Fix for charging not getting enabled in charge only mode by
external charger.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Added support for main charger over voltage protection.
Signed-off-by: NRupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: NMichel JAOUEN <michel.jaouen@stericsson.com>

Due to a bug in some AB8500 ASICs charger removal cannot always
be detected if the removal and reinsertion is done to close in time.
This patch detects above described case and handles the situation
so that charging will be kept turned on.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Enforce the white space character after 'if'.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Add 2.7v, 2.9v, 3.0v, 3.2v and 3.3v charging voltages for backup
battery. Before that only 2.5v, 2.6v, 2.8v, 3.1v were available.
Signed-off-by: NYang QU <yang.qu@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMaxime COQUELIN <maxime.coquelin@stericsson.com>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Tested-by: NXiao Mei ZHANG <xiaomei.zhang@stericsson.com>

Unscaled capacity should be reported for POWER_SUPPLY_PROP_CAPACITY.
Signed-off-by: NMartin Bergstrom <martin.bergstrom@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Tested-by: NJonas ABERG <jonas.aberg@stericsson.com>

Add support for a power cut feature which allows user to
configure when ab8505 and ab8540 based platforms should shut
down system due to low battery.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

Any platform can be dynamically probed for model and version number
provided the AB8500 MFD parent device pointer is available. This
patch obtains that pointer and stores it in a locally controlled
struct for later use.
Signed-off-by: NLee Jones <lee.jones@linaro.org>

End of charging is managed by SW.
Signed-off-by: NRajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
Tested-by: NJonas ABERG <jonas.aberg@stericsson.com>

Signed-off-by: NLee Jones <lee.jones@linaro.org>

Just lots of white space corrections, changing some of the 4 space
tabs to 8 and pulling back some of the double tabbing back into
singles, such as the remaining of the driver.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Make use of the hierarchical interrupt rergister called
ITLatchHier1 - 3 also for the 8500 platform (currently the
hierarchical interrupt registers are used only for the 8540
and 9540 platforms). This will make the interrupt routing
go faster since fewer i2c reads need to made in the most
common cases.
Signed-off-by: NDariusz Szymczak <dariusz.xd.szymczak@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Use kstrtoul_from_user for getting an unsigned long from userspace
which is less error prone.
Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

As I am working on SPARSE_IRQ a number of implicit resource
grabs in the kernel become evident. For example, some includes
like <linux/irqs.h> would implicitly include <mach/irqs.h>
and then from there <mach/db8500-regs.h>.

In many cases it is masking the fact that drivers do not
properly use resources to pass their dependencies, base
addresses etc. So write explicit #include statements with
TODO items to have this fixed the proper way to all drivers
doing this.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Hierarchically, the abx500-clk shall be considered as a child of the
ab8500 core. The abx500-clk is intiated at arch init and thus the clks
will be available when clients needs them.
Signed-off-by: NUlf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com>
Reviewed-by: NPatrice CHOTARD <patrice.chotard@stericsson.com>
Reviewed-by: NGabriel FERNANDEZ <gabriel.fernandez@stericsson.com>
Reviewed-by: NPhilippe BEGNIC <philippe.begnic@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Required to read out correct debug information from the AB chip.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Enable group write permissions for ab8500 debug MFD driver.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Several states can be detected when a device is initially turned on.
This patch displays these states in the log. If none of the states
are true, then we report that too.
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NYang QU <yang.qu@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NAlexandre BOURDIOL <alexandre.bourdiol@stericsson.com>
Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

This patch allows to dump the SIM registers from debugfs. It will
temporary change the config to allow APE side to read the SIM registers.
Note that this read can cause problem on modem side since the modem
can't read these registers while the operation is ongoing.
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

So we're removing support for it.
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Tested-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Add VBUS_DET_R, VBUS_DET_F IRQ, ID_DET_PLUGR and ID_DET_PLUGF IRQ
information to ab8505_iddet_resources. These are required to get
interrupts for AB8505 cut-2.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Optimise GPADC driver:
 * for code readability and maintenance by grouping similar cheking
 * for performance by grouping several writing to control register
Signed-off-by: NAlexandre Bourdiol <alexandre.bourdiol@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Allow GPADC debug information to be shown when executing on an AB8540
based platform.
Signed-off-by: NAlexandre Bourdiol <alexandre.bourdiol@stericsson.com>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: NPhilippe LANGLAIS <philippe.langlais@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

This patch enables the GPADC to work on AB8540 based platforms.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Add a new reset function which uses the AB WD with 0 timeout.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Make it possible to dump all registers in ab8505 and ab9540.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NAlexandre Torgue <alexandre.torgue@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Tested-by: NMaxime COQUELIN <maxime.coquelin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Add error checks to see if sysctrl was probed as it should.
If the sysctrl_dev is not set the return value is -EINVAL.
Signed-off-by: NMarcus Danielsson <marcus.danielsson@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Tested-by: NPer FORLIN <per.forlin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Add information regarding what ab interrupt that caused
a wake-up from suspend in <debugfs>/ab8500/interrupts.
Also print the name of the interrupts, not just the numbers.
Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NPer FORLIN <per.forlin@stericsson.com>
Tested-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Stop trying to read i2c registers if one fail.
Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

ITSource/ITLatch 7, 8, 9 and 10 don't exist on AB8540. This patch
replaces them with '-1' in the interrupt list, and handles the '-1'
in the code accordingly.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Here we're separating Battery Management devices into their own
structure, removing the common device structure & redistribute them
amongst the individual platform structs and completing the population
of them.
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Dump function that stores all readable ABB registers to a memory
areas where they can be accessed from dump file.
Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

This patch changes bank prints to use hex value.
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMarcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: NDaniel WILLERUD <daniel.willerud@stericsson.com>
Tested-by: NJonas ABERG <jonas.aberg@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

There are missing register descriptions from the AB8505 user manual
and these need to be masked so that the APEINT line can toggle.
This patch also affects the behaviour of AB9540.
Signed-off-by: NMarcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMaxime COQUELIN <maxime.coquelin@stericsson.com>
Reviewed-by: NAlexandre TORGUE <alexandre.torgue@stericsson.com>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Add the support of gpacd hw conversion and make the number of
sample configurable.
Signed-off-by: NM'boumba Cedric Madianga <cedric.madianga@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Tested-by: NMichel JAOUEN <michel.jaouen@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

Reread the gpadc once upon failure.
Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NMattias WALLIN <mattias.wallin@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>

suspend/resume methods implemented to prevent suspend while the gpadc
driver is busy.
Signed-off-by: NDaniel WILLERUD <daniel.willerud@stericsson.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NJonas ABERG <jonas.aberg@stericsson.com>
Reviewed-by: NUlf HANSSON <ulf.hansson@stericsson.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>