Allow the caller to pass host tsc value to kvm_x86_ops->read_l1_tsc().
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Improve performance of time system calls when using Linux pvclock,
by reading time info from fixmap visible copy of pvclock data.

Originally from Jeremy Fitzhardinge.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Hook into generic pvclock vsyscall code, with the aim to
allow userspace to have visibility into pvclock data.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Originally from Jeremy Fitzhardinge.

Introduce generic, non hypervisor specific, pvclock initialization
routines.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

As noted by Gleb, not advertising SSE2 support implies
no RDTSC barriers.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Acked-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Originally from Jeremy Fitzhardinge.

So code can be reused.
Acked-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Originally from Jeremy Fitzhardinge.

We can copy the information directly from "struct pvclock_vcpu_time_info",
remove pvclock_shadow_time.
Reviewed-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Originally from Jeremy Fitzhardinge.

pvclock_get_time_values, which contains the memory barriers
will be removed by next patch.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We want to expose the pvclock shared memory areas, which
the hypervisor periodically updates, to userspace.

For a linear mapping from userspace, it is necessary that
entire page sized regions are used for array of pvclock
structures.

There is no such guarantee with per cpu areas, therefore move
to memblock_alloc based allocation.
Acked-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Otherwise its possible for an unrelated KVM_REQ_UPDATE_CLOCK (such as due to CPU
migration) to clear the bit.

Noticed by Paolo Bonzini.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NGlauber Costa <glommer@parallels.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

No need to check return value before breaking switch.
Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Return value of this function will be that of ioctl().

#include <stdio.h>
#include <linux/kvm.h>

int main () {
	int fd;
	fd = open ("/dev/kvm", 0);
	fd = ioctl (fd, KVM_CREATE_VM, 0);
	ioctl (fd, KVM_SET_TSS_ADDR, 0xfffff000);
	perror ("");
	return 0;
}

Output is "Operation not permitted". That's not what
we want.

Return -EINVAL in this case.
Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We should avoid kfree()ing error pointer in kvm_vcpu_ioctl() and
kvm_arch_vcpu_ioctl().
Signed-off-by: NGuo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch filters noslot pfn out from error pfns based on Marcelo comment:
noslot pfn is not a error pfn

After this patch,
- is_noslot_pfn indicates that the gfn is not in slot
- is_error_pfn indicates that the gfn is in slot but the error is occurred
  when translate the gfn to pfn
- is_error_noslot_pfn indicates that the pfn either it is error pfns or it
  is noslot pfn
And is_invalid_pfn can be removed, it makes the code more clean
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Commit

    844ab6f9 x86, mm: Find_early_table_space based on ranges that are actually being mapped

added back some lines back wrongly that has been removed in commit

    7b16bbf9 Revert "x86/mm: Fix the size calculation of mapping tables"

remove them again.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQW_vuaYQbmagVnxT2DGsYc=9tNeAbdBq53sYkitPOwxSQ@mail.gmail.comAcked-by: NJacob Shin <jacob.shin@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off
efi_enabled once setup is done. Beyond setup, it is normally used to
determine if runtime services are available and we will have none.

This will resolve issues stemming from efivars modprobe panicking on a
32/64-bit setup, as well as some reboot issues on similar setups.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991Reported-by: NMarko Kohtala <marko.kohtala@gmail.com>
Reported-by: NMaxim Kammerer <mk@dee.su>
Signed-off-by: NOlof Johansson <olof@lixom.net>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: stable@kernel.org # 3.4 - 3.6
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Current logic finds enough space for direct mapping page tables from 0
to end. Instead, we only need to find enough space to cover mr[0].start
to mr[nr_range].end -- the range that is actually being mapped by
init_memory_mapping()

This is needed after 1bbbbe77, to address
the panic reported here:

  https://lkml.org/lkml/2012/10/20/160
  https://lkml.org/lkml/2012/10/21/157Signed-off-by: NJacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/20121024195311.GB11779@jshin-ToonieTested-by: NTom Rini <trini@ti.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

We need to handle E820_RAM and E820_RESERVED_KERNEL at the same time.

Also memblock has page aligned range for ram, so we could avoid mapping
partial pages.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.comAcked-by: NJacob Shin <jacob.shin@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>

We will not map partial pages, so need to make sure memblock
allocation will not allocate those bytes out.

Also we will use for_each_mem_pfn_range() to loop to map memory
range to keep them consistent.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQVZirvaBMFYRfXMmWEcHbKSicQEHz4VAwUv0xFCk51ZNw@mail.gmail.comAcked-by: NJacob Shin <jacob.shin@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>

Posting this patch to fix an issue concerning sparse irq's that
I raised a while back.  There was discussion about adding
refcounting to sparse irqs (to fix other potential race
conditions), but that does not appear to have been addressed
yet.  This covers the only issue of this type that I've
encountered in this area.

A NULL pointer dereference can occur in
smp_irq_move_cleanup_interrupt() if we haven't yet setup the
irq_cfg pointer in the irq_desc.irq_data.chip_data.

In create_irq_nr() there is a window where we have set
vector_irq in __assign_irq_vector(), but not yet called
irq_set_chip_data() to set the irq_cfg pointer.

Should an IRQ_MOVE_CLEANUP_VECTOR hit the cpu in question during
this time, smp_irq_move_cleanup_interrupt() will attempt to
process the aforementioned irq, but panic when accessing
irq_cfg.

Only continue processing the irq if irq_cfg is non-NULL.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20121016125021.GA22935@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The variable port is initialized but never used
otherwise, so remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/CAPgLHd8NZkYSkZm22FpZxiEh6HcA0q-V%3D29vdnheiDhgrJZ%2Byw@mail.gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Calling __pa() with an ioremap'd address is invalid. If we
encounter an efi_memory_desc_t without EFI_MEMORY_WB set in
->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.

On CONFIG_X86_32 this results in the following oops:

  BUG: unable to handle kernel paging request at f7f22280
  IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210
  *pdpt = 0000000001978001 *pde = 0000000001ffb067 *pte = 0000000000000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in:

  Pid: 0, comm: swapper Not tainted 3.0.0-acpi-efi-0805 #3
   EIP: 0060:[<c10257b9>] EFLAGS: 00010202 CPU: 0
   EIP is at reserve_ram_pages_type+0x89/0x210
   EAX: 0070e280 EBX: 38714000 ECX: f7814000 EDX: 00000000
   ESI: 00000000 EDI: 38715000 EBP: c189fef0 ESP: c189fea8
   DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 0, ti=c189e000 task=c18bbe60 task.ti=c189e000)
  Stack:
   80000200 ff108000 00000000 c189ff00 00038714 00000000 00000000 c189fed0
   c104f8ca 00038714 00000000 00038715 00000000 00000000 00038715 00000000
   00000010 38715000 c189ff48 c1025aff 38715000 00000000 00000010 00000000
  Call Trace:
   [<c104f8ca>] ? page_is_ram+0x1a/0x40
   [<c1025aff>] reserve_memtype+0xdf/0x2f0
   [<c1024dc9>] set_memory_uc+0x49/0xa0
   [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa
   [<c19216d4>] start_kernel+0x291/0x2f2
   [<c19211c7>] ? loglevel+0x1b/0x1b
   [<c19210bf>] i386_start_kernel+0xbf/0xc8

The only time we can call set_memory_uc() for a memory region is
when it is part of the direct kernel mapping. For the case where
we ioremap a memory region we must leave it alone.

This patch reimplements the fix from e8c71062 ("x86, efi:
Calling __pa() with an ioremap()ed address is invalid") which
was reverted in e1ad783b because it caused a regression on
some MacBooks (they hung at boot). The regression was caused
because the commit only marked EFI_RUNTIME_SERVICES_DATA as
E820_RESERVED_EFI, when it should have marked all regions that
have the EFI_MEMORY_RUNTIME attribute.

Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because of the way that the memory map might be
configured as detailed in the following bug report,

	https://bugzilla.redhat.com/show_bug.cgi?id=748516

e.g. some of the EFI memory regions *need* to be mapped as part
of the direct kernel mapping.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1350649546-23541-1-git-send-email-matt@console-pimps.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Although based on the Intel P6 design, the interrupt mechnanism
for KNC more closely resembles the Intel architectural
perfmon one.

We can't just re-use that code though, because KNC has different
MSR numbers for the status and ack registers.

In this case we just cut-and paste from perf_event_intel.c
with some minor changes, as it looks like it would not be
worth the trouble to change that code to be MSR-configurable.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: eranian@gmail.com
Cc: Meadows Lawrence F <lawrence.f.meadows@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171304410.23243@vincent-weaver-1.um.maine.edu
[ Small stylistic edits. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

x86_pmu.enable() is called from x86_pmu_enable() with
cpuc->enabled set to 0.  This means we weren't re-enabling the
counters after a context switch.

This patch just removes the check, as it should't be necessary
(and the equivelent x86_ generic code does not have the checks).

The origin of this problem is the KNC driver being based on the
P6 one.   The P6 driver also has this issue, but works anyway
due to various lucky accidents.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: eranian@gmail.com
Cc: Meadows
Cc: Lawrence F <lawrence.f.meadows@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171303290.23243@vincent-weaver-1.um.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>

Early versions of Intel KNC chips have a bug where bits above 32
were not properly set.  We worked around this by only using the
bottom 32 bits (out of 40 that should be available).

It turns out this workaround breaks overflow handling.

The buggy silicon will in theory never be used in production
systems, so remove this workaround so we get proper overflow
support.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: eranian@gmail.com
Cc: Meadows Lawrence F <lawrence.f.meadows@intel.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210171302140.23243@vincent-weaver-1.um.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>

This, beyond handling corner cases, also fixes some build warnings:

 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_disable_box’:
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:124:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized]
 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_enable_box’:
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:135:9: warning: ‘config’ is used uninitialized in this function [-Wuninitialized]
 arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function ‘snbep_uncore_pci_read_counter’:
 arch/x86/kernel/cpu/perf_event_intel_uncore.c:164:2: warning: ‘count’ is used uninitialized in this function [-Wuninitialized]
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Cc: a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1351068140-13456-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit 20167d34 ("x86-64: Fix
accounting in kernel_physical_mapping_init()") went a little too
far by entirely removing the counting of pre-populated page
tables: this should be done at boot time (to cover the page
tables set up in early boot code), but shouldn't be done during
memory hot add.

Hence, re-add the removed increments of "pages", but make them
and the one in phys_pte_init() conditional upon !after_bootmem.
Reported-Acked-and-Tested-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/506DAFBA020000780009FA8C@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Between 2.6.33 and 2.6.34 the PMU code was made modular.

The x86_pmu_enable() call was extended to disable cpuc->enabled
and iterate the counters, enabling one at a time, before calling
enable_all() at the end, followed by re-enabling cpuc->enabled.

Since cpuc->enabled was set to 0, that change effectively caused
the "val |= ARCH_PERFMON_EVENTSEL_ENABLE;" code in p6_pmu_enable_event()
and p6_pmu_disable_event() to be dead code that was never called.

This change removes this code (which was confusing) and adds some
extra commentary to make it more clear what is going on.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191732000.14552@vincent-weaver-1.um.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch updates the generic events on p6, including some new
extended cache events.

Values for these events were taken from the equivelant PAPI
predefined events.

Tested on a Pentium II.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191730080.14552@vincent-weaver-1.um.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>

According to Intel SDM Volume 3B, FP_ASSIST is limited to Counter 1 only,
not Counter 0.

Tested on a Pentium II.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1210191728570.14552@vincent-weaver-1.um.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

   722bc6b1 x86/mm: Fix the size calculation of mapping tables

Tried to address the issue that the first 2/4M should use 4k pages
if PSE enabled, but extra counts should only be valid for x86_32.

This commit caused a kdump regression: the kdump kernel hangs.

Work is in progress to fundamentally fix the various page table
initialization issues that we have, via the design suggested
by H. Peter Anvin, but it's not ready yet to be merged.

So, to get a working kdump revert to the last known working version,
which is the revert of this commit and of a followup fix (which was
incomplete):

   bd2753b2 x86/mm: Only add extra pages count for the first memory range during pre-allocation

Tested kdump on physical and virtual machines.
Signed-off-by: NDave Young <dyoung@redhat.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NFlavio Leitner <fbl@redhat.com>
Tested-by: NFlavio Leitner <fbl@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Flavio Leitner <fbl@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: ianfang.cn@gmail.com
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

In check_hw_exists() we try to detect non-emulated MSR accesses
by writing an arbitrary value into one of the PMU registers
and check if it's value after a readout is still the same.
This algorithm silently assumes that the register does not contain
the magic value already, which is wrong in at least one situation.

Fix the algorithm to really do a read-modify-write cycle. This fixes
a warning under Xen under some circumstances on AMD family 10h CPUs.

The reasons in more details actually sound like a story from
Believe It or Not!:

First you need an AMD family 10h/12h CPU. These do not reset the
PERF_CTR registers on a reboot.
Now you boot bare metal Linux, which goes successfully through this
check, but leaves the magic value of 0xabcd in the register. You
don't use the performance counters, but do a reboot (warm reset).
Then you choose to boot Xen. The check will be triggered with a
recent Linux kernel as Dom0 again, trying to write 0xabcd into the
MSR. Xen silently drops the write (expected), but the subsequent read
will return the value in the register, which just happens to be the
expected magic value. Thus the test misleadingly succeeds, leaving
the kernel in the belief that the PMU is available. This will trigger
the following message:

[    0.020294] ------------[ cut here ]------------
[    0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17()
[    0.020318] Hardware name: empty
[    0.020323] Modules linked in:
[    0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7
[    0.020340] Call Trace:
[    0.020354]  [<ffffffff81050379>] warn_slowpath_common+0x80/0x98
[    0.020369]  [<ffffffff810503a6>] warn_slowpath_null+0x15/0x17
[    0.020378]  [<ffffffff810034df>] xen_apic_write+0x15/0x17
[    0.020392]  [<ffffffff8101cb2b>] perf_events_lapic_init+0x2e/0x30
[    0.020410]  [<ffffffff81ee4dd0>] init_hw_perf_events+0x250/0x407
[    0.020419]  [<ffffffff81ee4b80>] ? check_bugs+0x2d/0x2d
[    0.020430]  [<ffffffff81002181>] do_one_initcall+0x7a/0x131
[    0.020444]  [<ffffffff81edbbf9>] kernel_init+0x91/0x15d
[    0.020456]  [<ffffffff817caaa4>] kernel_thread_helper+0x4/0x10
[    0.020471]  [<ffffffff817c347c>] ? retint_restore_args+0x5/0x6
[    0.020481]  [<ffffffff817caaa0>] ? gs_change+0x13/0x13
[    0.020500] ---[ end trace a7919e7f17c0a725 ]---

The new code will change every of the 16 low bits read from the
register and tries to write and read-back that modified number
from the MSR.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The mmu_notifier_retry is not specific to any vcpu (and never will be)
so only take struct kvm as a parameter.

The motivation is the ARM mmu code that needs to call this from
somewhere where we long let go of the vcpu pointer.
Signed-off-by: NChristoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM_PV_REASON_PAGE_NOT_PRESENT kicks cpu out of idleness, but we haven't
marked that spot as an exit from idleness.

Not doing so can cause RCU warnings such as:

[  732.788386] ===============================
[  732.789803] [ INFO: suspicious RCU usage. ]
[  732.790032] 3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63 Tainted: G        W
[  732.790032] -------------------------------
[  732.790032] include/linux/rcupdate.h:738 rcu_read_lock() used illegally while idle!
[  732.790032]
[  732.790032] other info that might help us debug this:
[  732.790032]
[  732.790032]
[  732.790032] RCU used illegally from idle CPU!
[  732.790032] rcu_scheduler_active = 1, debug_locks = 1
[  732.790032] RCU used illegally from extended quiescent state!
[  732.790032] 2 locks held by trinity-child31/8252:
[  732.790032]  #0:  (&rq->lock){-.-.-.}, at: [<ffffffff83a67528>] __schedule+0x178/0x8f0
[  732.790032]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff81152bde>] cpuacct_charge+0xe/0x200
[  732.790032]
[  732.790032] stack backtrace:
[  732.790032] Pid: 8252, comm: trinity-child31 Tainted: G        W    3.7.0-rc1-next-20121019-sasha-00002-g6d8d02d-dirty #63
[  732.790032] Call Trace:
[  732.790032]  [<ffffffff8118266b>] lockdep_rcu_suspicious+0x10b/0x120
[  732.790032]  [<ffffffff81152c60>] cpuacct_charge+0x90/0x200
[  732.790032]  [<ffffffff81152bde>] ? cpuacct_charge+0xe/0x200
[  732.790032]  [<ffffffff81158093>] update_curr+0x1a3/0x270
[  732.790032]  [<ffffffff81158a6a>] dequeue_entity+0x2a/0x210
[  732.790032]  [<ffffffff81158ea5>] dequeue_task_fair+0x45/0x130
[  732.790032]  [<ffffffff8114ae29>] dequeue_task+0x89/0xa0
[  732.790032]  [<ffffffff8114bb9e>] deactivate_task+0x1e/0x20
[  732.790032]  [<ffffffff83a67c29>] __schedule+0x879/0x8f0
[  732.790032]  [<ffffffff8117e20d>] ? trace_hardirqs_off+0xd/0x10
[  732.790032]  [<ffffffff810a37a5>] ? kvm_async_pf_task_wait+0x1d5/0x2b0
[  732.790032]  [<ffffffff83a67cf5>] schedule+0x55/0x60
[  732.790032]  [<ffffffff810a37c4>] kvm_async_pf_task_wait+0x1f4/0x2b0
[  732.790032]  [<ffffffff81139e50>] ? abort_exclusive_wait+0xb0/0xb0
[  732.790032]  [<ffffffff81139c25>] ? prepare_to_wait+0x25/0x90
[  732.790032]  [<ffffffff810a3a66>] do_async_page_fault+0x56/0xa0
[  732.790032]  [<ffffffff83a6a6e8>] async_page_fault+0x28/0x30
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NChegu Vinod  <chegu_vinod@hp.com>
Tested-by: NChegu Vinod <chegu_vinod@hp.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We can not directly call kvm_release_pfn_clean to release the pfn
since we can meet noslot pfn which is used to cache mmio info into
spte
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use __func__ instead of the function name in svm_hardware_enable since
those things tend to get out of sync. This also slims down printk line
length in conjunction with using pr_err.

No functionality change.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Initializing uncore PMU on virtualized CPU may hang the kernel.
This is because kvm does not emulate the entire hardware. Thers
are lots of uncore related MSRs, making kvm enumerate them all
is a non-trival task. So just disable uncore on virtualized CPU.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Tested-by: NPekka Enberg <penberg@kernel.org>
Cc: a.p.zijlstra@chello.nl
Cc: eranian@google.com
Cc: andi@firstfloor.org
Cc: avi@redhat.com
Link: http://lkml.kernel.org/r/1345540117-14164-1-git-send-email-zheng.z.yan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS
(-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event
/and/ the process has a pending signal then %eip (and %eax) are
corrupted when returning to the main process after handling the
signal.  The application may then crash with SIGSEGV or a SIGILL or it
may have subtly incorrect behaviour (depending on what instruction it
returned to).

The occurs because handle_signal() is incorrectly thinking that there
is a system call that needs to restarted so it adjusts %eip and %eax
to re-execute the system call instruction (even though user space had
not done a system call).

If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK
(-516) then handle_signal() only corrupted %eax (by setting it to
-EINTR).  This may cause the application to crash or have incorrect
behaviour.

handle_signal() assumes that regs->orig_ax >= 0 means a system call so
any kernel entry point that is not for a system call must push a
negative value for orig_ax.  For example, for physical interrupts on
bare metal the inverse of the vector is pushed and page_fault() sets
regs->orig_ax to -1, overwriting the hardware provided error code.

xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax
instead of -1.

Classic Xen kernels pushed %eax which works as %eax cannot be both
non-negative and -RESTARTSYS (etc.), but using -1 is consistent with
other non-system call entry points and avoids some of the tests in
handle_signal().

There were similar bugs in xen_failsafe_callback() of both 32 and
64-bit guests. If the fault was corrected and the normal return path
was used then 0 was incorrectly pushed as the value for orig_ax.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NJan Beulich <JBeulich@suse.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>