ehci-omap needs NOP_USB_XCEIV PHY driver to function
properly, so select it. As the USB PHY drivers no longer
depend on USB_PHY, it is safe to select the PHY drivers.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Tested-by: NAdrien Vergé <adrienverge@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Convert PHY Drivers from menuconfig to menu so that the PHY drivers
can be explicitely selected by the controller drivers.

USB_PHY is no longer a user visible option. It is upto to the PHY
drivers to select it if needed. This patch does so for the existing
PHY drivers that use the USB_PHY library.

Doing so moves the USB_PHY and PHY driver selection problem from the
end user to the PHY and controller driver developer.

e.g.

Earlier, a controller driver (e.g. EHCI_OMAP) that needs to select
a PHY driver (e.g. NOP_PHY) couldn't do so because the PHY driver
depended on USB_PHY. Making the controller driver depend on USB_PHY
has a negative effect i.e. it becomes invisible to the user till
USB_PHY is enabled. Most end users will not familiar with this.

With this patch, the end user just needs to select the controller driver
needed for his/her platform without worrying about which PHY driver to
select.

Also update USB_EHCI_MSM, USB_LPC32XX and USB_OMAP to not depend
on USB_PHY any more. They can safely select the necessary PHY drivers.

[ balbi@ti.com : refreshed on top of my next branch. Changed bool
	followed by default n into def_bool n ]

CC: Pavankumar Kondeti <pkondeti@codeaurora.org>
Acked-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

ARCH_EXYNOS is going to be excluded from PLAT_S5P, so it must be checked
separately in Exynos-related Kconfig entries.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Separate the Tegra on-chip host controller driver from
ehci-hcd host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
[swarren, reworked Manjunath's patches to split them more logically,
minor re-order of added lines to better match layout of other split-up
HCD drivers and existing code, add MODULE_DEVICE_TABLE, fix
MODULE_LICENSE, adapted to change in earlier patches which removed the
ehci_driver_overrides addition, removed all PM code and solved circular
dependencies.]
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NThierry Reding <thierry.reding@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON.  This
allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC.

Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can
get the same configuration with CAVIUM_OCTEON_SOC.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net
Cc: devel@driverdev.osuosl.org
Cc: linux-usb@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/5295/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The three options USB_ARCH_HAS_{EHCI,OHCI,XHCI} are all well beyond
their recommended shelf life. They have caused numerous build failures
over the years because they are never completely correct, and with
the move to splitting out the platform specific back-ends out of the
driver, there is no real need for them any more. Also, the use of making
USB_ARCH_HAS_HCD depend on it is questionable since one can always enable
dummy_hc these days.

This patch enables them unconditionally for all platforms and
architectures, which means it is now possible to build host controller
drivers for machines that are known not to come with this hardware,
but that is just how we treat most other drivers.

In order to minimise the impact on existing architecture code and
defconfig files, all the Kconfig are left present for now. All platforms
that currently do 'select USB_ARCH_HAS_*' should subsequently be changed
not to select that. All drivers depending on USB_ARCH_HAS_HCD should
be changed to depend on USB_SUPPORT instead.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch splits the ohci-platform code from ohci-hcd out
into its own separate driver module.This work is part of enabling
multi-platform kernels on ARM.

In V2:
  -Passed "hcd" argument instead of "ohci" in ohci_setup() because it is
   using "struct usb_hcd" argument.
In V3:
  -Directly passed "hcd" argument not required to call ohci_to_hcd() function.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch splits the PCI portion of ohci-hcd out into its
own separate driver module, called ohci-pci.

The major point of difficulty lies in ohci-pci's many vendor- and
device-specific workarounds.  Some of them have to be applied before
calling ohci_start() some after, which necessitates a fair amount of
code motion.  The other platform drivers require much smaller changes.

The complete sb800_prefetch() function moved to ohci-q.c,because its
only related to ohci-pci driver.

USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and
USB_OHCI_HCD_PPC_OF that's what removed.

V2:
  - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset
    and rest of the generic code is written in ohci_start of ohci-hcd.c file.
V3:
 - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci.

V4:
 -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci.
 -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI.
 -overrides renamed with pci_override,its giving proper meaning.

V5:
 -sb800_prefetch() moved to pci-quirks.c,because its only related to pci.

V6:
 -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3.
 -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete  ohci-pci separation patch.

V7:
 -Unrelated include file has been removed from ohci.h file.

V8:
 -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

FUSBH200-HCD is an USB2.0 hcd for Faraday FUSBH200.
FUSBH200 is an ehci-like controller with some differences.
First, register layout of FUSBH200 is incompatible with EHCI.
Furthermore, FUSBH200 is lack of siTDs which means iTDs
are used for both HS and FS ISO transfer.
Signed-off-by: NYuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Kconfig settings for uhci-hcd are too permissive; they allow the
driver to be built without any bus-glue modules configured
(USB_UHCI_HCD enabled, PCI disabled, SPARC_LEON disabled, ARCH_VT8500
enabled, and USB_UHCI_PLATFORM disabled).

This patch fixes the problem by rearranging the dependencies.  Now the
platform-dependent config options don't depend on USB_UHCI_HCD;
instead it depends on them.  Furthermore, there is no user-selectable
choice as to which glue modules will be built.  If USB_UHCI_HCD is
enabled then all applicable bus glues will be built.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Kconfig entry for USB_EHCI_MSM unconditionally selects USB_MSM_OTG,
which is now only visible when USB_PHY is also enabled.

This adds an appropriate dependency and enables USB_PHY in the msm
defconfig, avoiding the Kbuild warning:

warning: (USB_EHCI_MSM) selects USB_MSM_OTG which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && ARCH_MSM)
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't select NOP_USB_XCEIV. Instead, board config
must select USB_PHY and the appropriate PHY driver.

Also add a hint in Kconfig so that users enabling
this driver manually enable the right PHY drivers as well.

Gets rid of the below warnings when USB_EHCI_HCD_OMAP
is enabled.

warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)
warning: (USB_EHCI_HCD_OMAP) selects NOP_USB_XCEIV which has unmet direct dependencies (USB_SUPPORT && USB_PHY)
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch encloses all symbols depending on USB_XHCI_HCD within an if
USB_XHCI_HCD / endif block.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the various depends on USB_OHCI_HCD from the OHCI HCD
drivers and enclose them within an if USB_OHCI_HCD / endif block. The
Octeon OHCI HCD driver has been moved around to remain in this block.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Thist patch removes the depends on USB_EHCI_HCD that the various USB
EHCI HCD drivers use and encloses every driver within an if USB_EHCI_HCD
/ endif block. The EHCI HCD platform and Octeon drivers have been moved
around to remain enclosed within this block.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Just like the OHCI counter part we just can remove the architecture
specific symbols which prevent these configuration symbols from being
selected by platforms/architectures requiring it. The original
implementation did not scale at all since it required each and every
single architecture to be added for these configuration symbols to be
selected. Now it is up to the EHCI driver and/or platform to select
these configuration symbols accordingly.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the depends on USB from all config symbols in
drivers/usb/host/Kconfig and replace that with an if USB / endif block
as suggested by Alan Stern. Some source ... Kconfig lines have been
shuffled around to permit a better regroupment of the Kconfig files
depending on "config USB" item. No functionnal change is introduced.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the  Qualcomm QSD/MSM on-chip host controller driver from
ehci-hcd host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Qualcomm QSD/MSM
can be booted with a multi-platform kernel, which is not expected before
3.11.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the msm bus glue.

In V5 (arnd):
 - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls

In V3:
 - Detailed commit message added here describing why this patch is required.
 - Arranged  #include's in alphabetical order.
 - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver
   structure initialization instead of "msm-ehci", which was the reason
   why it broke in EHCI USB testing

In V2:
Tegra patch related changes removed from this patch.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the Atmel host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before Atmel can be
booted with a multi-platform kernel. This is currently planned for
Linux-3.11.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the Atmel bus glue.

In V4 (arnd):
 - reordered #include statements.
 - removed call to ehci_shutdown and the corresponding export

In V3:
 - Detailed commit message added here about why this patch is required.
 - Replaced hcd_name string "ehci-atmel" to "atmel-ehci".
 - Inserted blank line in the Makefile to separate the EHCI drivers from
   the following non-EHCI drivers.
 - Exported ehci_shutdown symbol as it is needed by the Atmel driver.
 - Eliminated ehci_atmel_setup routine because hcd registers
   can be directly set in the ehci_atmel_drv_probe function.

In V2:
  Resolved below compiler error.
  drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove':
  drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown'
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the  Samsung S5P/EXYNOS host controller driver from ehci-hcd
host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before S5P/EXYNOS can
be booted with a multi-platform kernel. We currently expect those
to get merged for 3.10.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the s5p bus glue.

In V4 (arnd)
 - revert some of the pointless changes.
 - fix allocation of s5p specific data structure.

In V3:
 - Detailed commit message added here, why this patch is required.
 - MODULE_LICENSE is GPL v2.
 - Added .extra_priv_size to eliminate the separate allocation of
   the s5p_ehci_hcd structure and removed .reset function pointer
   initialization.
 - Arranged  #include's in alphabetical order.
 - After using extra_priv_size initialization, struct usb_hcd *hcd
   is redundant and can be removed from the probe function.
 - Eliminated s5p_ehci_phy_enable,contents of statements moved
   into the s5p_ehci_probe
 - Eliminated s5p_ehci_phy_disable, contents of statements moved into
   the s5p_ehci_remove.

In V2:
 - Tegra patch related changes removed from this patch.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the SPEAr host controller driver from ehci-hcd host code
so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM;
however, note that other changes are still needed before SPEAr can be
booted with a multi-platform kernel, but they are queued in the
arm-soc tree for 3.10.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the SPEAr bus glue.

In V4 (arnd):
 - renamed all 'struct spear_ehci' pointers from 'ehci' to the
   less ambiguous 'sehci'.
 - folded trivial spear_start_ehci/spear_stop_ehci functions into
   callers.
 - brought back initialization of ehci->caps.

In V3:
 - Detailed commit message added here about why this patch is required.
 - Eliminated ehci_spear_setup routine because hcd registers can
   be directly set in the spear_ehci_hcd_drv_probe function.
 - spear_overrides struct initialized.
 - Converted to using .extra_priv_size for allocating spear_ehci,
   and updated all users of that structure.
 - to_spear_ehci() macro modified for spear_ehci.

In V2:
 - Replaced spear as SPEAr everywhere, leaving functions/variables/config options.
Signed-off-by: NDeepak Saxena <dsaxena@linaro.org>
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NViresh Kumar <viresh.linux@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: spear-devel@list.st.com
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Separate the Orion host controller driver from ehci-hcd host
code into its own driver module because of following reason.

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like

drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.

An earlier version of this patch was included in 3.9 but caused
a regression there, which has subsequently been fixed.

While we are here, use the opportunity to disabiguate the two
Marvell EHCI controller implementations in Kconfig.

In V4 (arnd):
- Improve Kconfig text

In V3:
- More detail provided in commit message regarding this patch.
- Replaced hcd_name string "ehci-orion" into "orion-ehci".
- MODULE_LICENSE is GPL v2.
- In ehci_init_driver calling second argument passed  as NULL instead of
  ehci_orion_overrides because ehci_orion_overrides is removed.

In V2:
- Tegra patch related changes removed from this patch.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJason Cooper <jason@lakedaemon.net>
Tested-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

USB_ULPI and USB_ULPI_VIEWPORT shouldn't really
be selected directly by anyone, but since Tegra
still needs some time before turning ulpi viewport
into a proper PHY driver, we need to keep the
selects in place.

This patch just fixes the conditional select
so that it will continue to build after merging
the latest PHY layer changes.
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

there are no more users of CONFIG_USB_OTG_UTILS
left in tree, we can remove it just fine.

[ kishon@ti.com : fixed a linking error due
	to original patch forgetting to change
	drivers/usb/Makefile ]
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

In PHY mode we need to have the nop-usb-xceiv transceiver
driver to operate, so select it in Kconfig.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1645) converts ehci-omap over to the new "ehci-hcd is a
library" approach, so that it can coexist peacefully with other EHCI
platform drivers and can make use of the private area allocated at
the end of struct ehci_hcd.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit d57ada0c.

All of these are wrong and need to be reverted for now.

Cc: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 6ed3c43d.

All of these are wrong, and need to be reverted for now.

Cc: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit e2ced166.

All of these are wrong, and need to be removed for now until they can
get reworked properly.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The recent patches from Manjunath Goudar introduced two small
mistakes in the Kconfig help text for the new options. Let's
fix those and the other entries that have become stale over time.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like

drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the multiplatform changes in arm-soc tree, it becomes
possible to enable the vt8500 platform at the same time
as other platforms that require a conflicting EHCI bus
glue. At the moment, this results in a warning like

drivers/usb/host/ehci-hcd.c:1277:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1257:0: note: this is the location of the previous definition
drivers/usb/host/ehci-omap.c:319:31: warning: 'ehci_hcd_omap_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the vt8500 bus glue.
Signed-off-by: NManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NTony Prisk <linux@prisktech.co.nz>
Cc: Alexey Charkov <alchark@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a couple of missing GENERIC_HARDIRQS dependencies to fix link
errors like below on s390:

ERROR: "devm_request_threaded_irq" [drivers/usb/gadget/mv_udc.ko] undefined!
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1643b) fixes a build error in ehci-hcd when compiling for
ARM with allmodconfig:

drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition
drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver' defined but not used [-Wunused-variable]
drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of the previous definition

The fix is to convert ehci-mxc over to the new "ehci-hcd is a library"
scheme so that it can coexist peacefully with the ehci-platform
driver.  As part of the conversion the ehci_mxc_priv data structure,
which was allocated dynamically, is now placed where it belongs: in
the private area at the end of struct ehci_hcd.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1626) splits the ehci-platform code from ehci-hcd out
into its own separate driver module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1625) splits the PCI portion of ehci-hcd out into its
own separate driver module, called ehci-pci.  Consistently with the
current practice, the decision whether to build this module is not
user-configurable.  If EHCI and PCI are enabled then the module will
be built, always.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All users have been converted to use the OHCI platform driver instead, thus
making ohci-sh obsolete, so remove it.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All users have been converted to use the OHCI platform driver instead, thus
making ohci-cns3xxx, so remove it.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The users have been converted to use the ehci platform driver instead, thus
making the ehci-cns3xxx driver obsolete, so remove it.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is not registered by any in-tree users, and if really needed by
some out of tree user, the same functionnality can be restored using the
ohci-platform driver using the following platform_data parameters:
	big_endian_desc = 1
	big_endian_mmio = 1
	no_big_frame_no = 1
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>