- 14 2月, 2013 2 次提交
-
-
由 Sage Weil 提交于
Add ability to flag virtual xattrs as hidden, such that you can getxattr them but they do not appear in listxattr. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NSam Lang <sam.lang@inktank.com>
-
由 Sage Weil 提交于
This has been deprecated since v3.3, 114fc474. Kill it. Signed-off-by: NSage Weil <sage@inktank.com> Reviewed-by: NSam Lang <sam.lang@inktank.com>
-
- 31 7月, 2012 1 次提交
-
-
由 Alan Cox 提交于
We re-run the loop but we don't re-set the attrs pointer back to NULL. Signed-off-by: NAlan Cox <alan@linux.intel.com> Reviewed-by: NAlex Elder <elder@inktank.com>
-
- 08 5月, 2012 1 次提交
-
-
由 Sage Weil 提交于
This was an ill-conceived feature that has been removed from Ceph. Do this gracefully: - reject attempts to specify a preferred_osd via the ioctl - stop exposing this information via virtual xattrs - always fill in -1 for requests, in case we talk to an older server - don't calculate preferred_osd placements/pgids Reviewed-by: NAlex Elder <elder@inktank.com> Signed-off-by: NSage Weil <sage@inktank.com>
-
- 22 3月, 2012 9 次提交
-
-
由 Alex Elder 提交于
In ceph_vxattrcb_file_layout(), there is a check to determine whether a preferred PG should be formatted into the output buffer. That check assumes that a preferred PG number of 0 indicates "no preference," but that is wrong. No preference is indicated by a negative (specifically, -1) PG number. In addition, if that condition yields true, the preferred value is formatted into a sized buffer, but the size consumed by the earlier snprintf() call is not accounted for, opening up the possibilty of a buffer overrun. Finally, in ceph_vxattrcb_dir_rctime() where the nanoseconds part of the time displayed did not include leading 0's, which led to erroneous (sub-second portion of) time values being shown. This fixes these three issues: http://tracker.newdream.net/issues/2155 http://tracker.newdream.net/issues/2156 http://tracker.newdream.net/issues/2157Signed-off-by: NAlex Elder <elder@dreamhost.com> Reviewed-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
This patch just rearranges a few bits of code to make more portions of ceph_setxattr() and ceph_removexattr() identical. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
All names defined in the directory and file virtual extended attribute tables are constant, and the size of each is known at compile time. So there's no need to compute their length every time any file's attribute is listed. Record the length of each string and use it when needed to determine the space need to represent them. In addition, compute the aggregate size of strings in each table just once at initialization time. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
The names of the callback functions used for virtual extended attributes are based only on the last component of the attribute name. Because of the way these are defined, this precludes allowing a single (lowest) attribute name for different callbacks, dependent on the type of file being operated on. (For example, it might be nice to support both "ceph.dir.layout" and "ceph.file.layout".) Just change the callback names to avoid this problem. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
A struct ceph_vxattr_cb does not represent a callback at all, but rather a virtual extended attribute itself. Drop the "_cb" suffix from its name to reflect that. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
Entries in the ceph virtual extended attribute tables all follow a distinct pattern in their definition. Enforce this pattern through the use of a macro. Also, a null name field signals the end of the table, so make that be the first field in the ceph_vxattr_cb structure. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
Use symbolic constants to define the top-level prefix for "ceph." extended attribute names. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
All callers of ceph_match_vxattr() determine what to pass as the first argument by calling ceph_inode_vxattrs(inode). Just do that inside ceph_match_vxattr() itself, changing it to take an inode rather than the vxattr pointer as its first argument. Also ensure the function works correctly for an empty table (i.e., containing only a terminating null entry). Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Alex Elder 提交于
For some reason, ceph_setxattr() allocates an extra byte in which a '\0' is stored past the end of an extended attribute value. This is not needed, and is potentially misleading, so get rid of it. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 03 2月, 2012 1 次提交
-
-
由 Alex Elder 提交于
The virtual extended attribute named "ceph.layout" is meaningful only for regular files. Change its name to be "ceph.file.layout" to more directly reflect that in the ceph xattr namespace. Preserve the old "ceph.layout" name for the time being (until we decide it's safe to get rid of it entirely). Add a missing initializer for "readonly" in the terminating entry. Signed-off-by: NAlex Elder <elder@dreamhost.com> Reviewed-by: NSage Weil <sage@newdream.net>
-
- 13 1月, 2012 1 次提交
-
-
由 Alex Elder 提交于
In __ceph_build_xattrs_blob(), if a ceph inode's extended attributes are marked dirty, all attributes recorded in its rb_tree index are formatted into a "blob" buffer. The target buffer is recorded in ceph_inode->i_xattrs.prealloc_blob, and it is expected to exist and be of sufficient size to hold the attributes. The extended attributes are marked dirty in two cases: when a new attribute is added to the inode; or when one is removed. In the former case work is done to ensure the prealloc_blob buffer is properly set up, but in the latter it is not. Change the logic in ceph_removexattr() so it matches what is done in ceph_setxattr(). Note that this is done in a way that keeps the two blocks of code nearly identical, in anticipation of a subsequent patch that encapsulates some of this logic into one or more helper routines. Signed-off-by: NAlex Elder <elder@dreamhost.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 08 12月, 2011 1 次提交
-
-
由 Sage Weil 提交于
We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: NAmon Ott <a.ott@m-privacy.de> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 27 7月, 2011 1 次提交
-
-
由 Sage Weil 提交于
d_parent is protected by d_lock: use it when looking up a dentry's parent directory inode. Also take a reference and drop it in the caller to avoid a use-after-free. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Reviewed-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 08 6月, 2011 1 次提交
-
-
由 Sage Weil 提交于
We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 05 5月, 2011 1 次提交
-
-
由 Sage Weil 提交于
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the flags value so that the callers can do it outside of i_lock. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 14 1月, 2011 1 次提交
-
-
由 Sage Weil 提交于
Fix xattr name comparison in rbtree search for strings that share a prefix. The *name argument is null terminated, but the xattr name is not, so we need to use strncmp, but that means adjusting for the case where name is a prefix of xattr->name. The corresponding case in __set_xattr() already handles this properly (although in that case *name is also not null terminated). Reported-by: NSergiy Kibrik <sakib@meta.ua> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 21 10月, 2010 2 次提交
-
-
由 Julia Lawall 提交于
Convert a sequence of kmalloc and memcpy to use kmemdup. The semantic patch that performs this transformation is: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag,len; expression arg,e1,e2; statement S; @@ a = - \(kmalloc\|kzalloc\)(len,flag) + kmemdup(arg,len,flag) <... when != a if (a == NULL || ...) S ...> - memcpy(a,arg,len+1); // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Yehuda Sadeh 提交于
This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 23 8月, 2010 1 次提交
-
-
由 Sage Weil 提交于
When we snapshot dirty metadata that needs to be written back to the MDS, include dirty xattr metadata. Make the capsnap reference the encoded xattr blob so that it will be written back in the FLUSHSNAP op. Also fix the capsnap creation guard to include dirty auth or file bits, not just tests specific to dirty file data or file writes in progress (this fixes auth metadata writeback). Signed-off-by: NSage Weil <sage@newdream.net>
-
- 02 8月, 2010 1 次提交
-
-
由 Yehuda Sadeh 提交于
Mainly fixing minor issues reported by sparse. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 18 5月, 2010 5 次提交
-
-
由 Sage Weil 提交于
Drop the 'user.' prefix and use just 'ceph.' for fs virtual xattrs. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Henry C Chang 提交于
If the version hasn't changed, don't rebuild the index. Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Cheng Renquan 提交于
ceph_sb_to_client and ceph_client are really identical, we need to dump one; while function ceph_client is confusing with "struct ceph_client", ceph_sb_to_client's definition is more clear; so we'd better switch all call to ceph_sb_to_client. -static inline struct ceph_client *ceph_client(struct super_block *sb) -{ - return sb->s_fs_info; -} Signed-off-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Dan Carpenter 提交于
"xattr" is never NULL here. We took care of that in the previous if statement block. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Yehuda Sadeh 提交于
Following Nick Piggin patches in btrfs, pagecache pages should be allocated with __page_cache_alloc, so they obey pagecache memory policies. Also, using add_to_page_cache_lru instead of using a private pagevec where applicable. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 08 12月, 2009 1 次提交
-
-
由 Sage Weil 提交于
We never allocate the ceph_buffer and buffer separtely, so use a single constructor. Disallow put on NULL buffer; make the caller check. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 22 11月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
Error handling code following a kmalloc should free the allocated data. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 02 11月, 2009 1 次提交
-
-
由 Sage Weil 提交于
Fixes warning fs/ceph/xattr.c: In function '__build_xattrs': fs/ceph/xattr.c:353: warning: 'err' may be used uninitialized in this function Signed-off-by: NSage Weil <sage@newdream.net>
-
- 08 10月, 2009 1 次提交
-
-
由 Sage Weil 提交于
Signed-off-by: NSage Weil <sage@newdream.net>
-
- 07 10月, 2009 1 次提交
-
-
由 Sage Weil 提交于
Inode cache and inode operations. We also include routines to incorporate metadata structures returned by the MDS into the client cache, and some helpers to deal with file capabilities and metadata leases. The bulk of that work is done by fill_inode() and fill_trace(). Signed-off-by: NSage Weil <sage@newdream.net>
-