- 25 5月, 2012 8 次提交
-
-
由 Dan Carpenter 提交于
If "buf[0]" is 255 then "len" gets set to 0. The call to "crc_ccitt(0xffff, buf, len - 2);" casts the "len - 2" to a high positive number which is ugly. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Grazvydas Ignotas 提交于
This driver disables interrupt just after requesting it and enables it later, after interface is up. However currently there is a time window between request_irq() and disable_irq() where if interrupt arrives, the driver oopses because it's not yet ready to process it. This can be reproduced by inserting the module, associating and removing the module multiple times. Eliminate this race by setting IRQF_NOAUTOEN flag before request_irq(). Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
If drv->op_mode is NULL after trying to init the opmode, we go to the wrong label. Fix this, and clean up the code a bit. Reviewed-by: NGregory Greenman <gregory.greenman@intel.com> Reviewed-by: NGuy Cohen <guy.cohen@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Meenakshi Venkataraman 提交于
When adding a station fails in iwl_restore_stations, the driver treats it like a successful station add and sends a link quality command, when it it shouldn't. This patch fixes one of the potential sources for kernel warnings like this one: WARNING: at drivers/net/wireless/iwlwifi/iwl-agn-sta.c:905 iwl_send_lq_cmd+0x130/0x217 [iwlwifi]() Hardware name: 3323A2G Modules linked in: ... Pid: 17359, comm: kworker/u:2 Tainted: G O 3.3.0-wl+ #1 Call Trace: [<ffffffff81039620>] warn_slowpath_common+0x7e/0x96 [<ffffffff8103964d>] warn_slowpath_null+0x15/0x17 [<ffffffffa02a9f0b>] iwl_send_lq_cmd+0x130/0x217 [iwlwifi] [<ffffffffa02aa1fb>] iwl_restore_stations+0x209/0x289 [iwlwifi] [<ffffffffa02b07c2>] iwlagn_commit_rxon+0x602/0x7bd [iwlwifi] [<ffffffffa02b111f>] iwlagn_bss_info_changed+0x247/0x31a [iwlwifi] [<ffffffffa0861437>] ieee80211_bss_info_change_notify+0x1a5/0x1ba [mac80211] [<ffffffffa088afad>] ieee80211_destroy_auth_data+0x4b/0x70 [mac80211] [<ffffffffa088df26>] ieee80211_sta_work+0xb5/0x954 [mac80211] Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by: NWey-Yi W Guy <wey-yi.w.guy@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The ucode16 option is still very much work in progress, so there's no need to ask any users about it. Remove the option and code for now, we'll put it back when it's actually working. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Meenakshi Venkataraman 提交于
Shadow registers in the device are meant to allow the driver to update certain device registers without needing to wake up all components of the device. However, using this feature in the device causes communication between the driver and the device to become unreliable, resulting in host command timeouts. Disable this feature by default till a fix is available for the bug. Cc: stable@vger.kernel.org #2.6.38+ Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
The logic that allows to have a short TFD queue was completely wrong. We do maintain 256 Transmit Frame Descriptors, but they point to recycled buffers. We used to attach and de-attach different TFDs for the same buffer and it worked since they pointed to the same buffer. Also zero the number of BDs after unmapping a TFD. This seems not necessary since we don't reclaim the same TFD twice, but I like housekeeping. This patch solves this warning: [ 6427.079855] WARNING: at lib/dma-debug.c:866 check_unmap+0x727/0x7a0() [ 6427.079859] Hardware name: Latitude E6410 [ 6427.079865] iwlwifi 0000:02:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000296d393c] [size=8 bytes] [ 6427.079870] Modules linked in: ... [ 6427.079950] Pid: 6613, comm: ifconfig Tainted: G O 3.3.3 #5 [ 6427.079954] Call Trace: [ 6427.079963] [<c10337a2>] warn_slowpath_common+0x72/0xa0 [ 6427.079982] [<c1033873>] warn_slowpath_fmt+0x33/0x40 [ 6427.079988] [<c12dcb77>] check_unmap+0x727/0x7a0 [ 6427.079995] [<c12dcdaa>] debug_dma_unmap_page+0x5a/0x80 [ 6427.080024] [<fe2312ac>] iwlagn_unmap_tfd+0x12c/0x180 [iwlwifi] [ 6427.080048] [<fe231349>] iwlagn_txq_free_tfd+0x49/0xb0 [iwlwifi] [ 6427.080071] [<fe228e37>] iwl_tx_queue_unmap+0x67/0x90 [iwlwifi] [ 6427.080095] [<fe22d221>] iwl_trans_pcie_stop_device+0x341/0x7b0 [iwlwifi] [ 6427.080113] [<fe204b0e>] iwl_down+0x17e/0x260 [iwlwifi] [ 6427.080132] [<fe20efec>] iwlagn_mac_stop+0x6c/0xf0 [iwlwifi] [ 6427.080168] [<fd8480ce>] ieee80211_stop_device+0x5e/0x190 [mac80211] [ 6427.080198] [<fd833208>] ieee80211_do_stop+0x288/0x620 [mac80211] [ 6427.080243] [<fd8335b7>] ieee80211_stop+0x17/0x20 [mac80211] [ 6427.080250] [<c148dac1>] __dev_close_many+0x81/0xd0 [ 6427.080270] [<c148db3d>] __dev_close+0x2d/0x50 [ 6427.080276] [<c148d152>] __dev_change_flags+0x82/0x150 [ 6427.080282] [<c148e3e3>] dev_change_flags+0x23/0x60 [ 6427.080289] [<c14f6320>] devinet_ioctl+0x6a0/0x770 [ 6427.080296] [<c14f8705>] inet_ioctl+0x95/0xb0 [ 6427.080304] [<c147a0f0>] sock_ioctl+0x70/0x270 Cc: stable@vger.kernel.org Reported-by: NAntonio Quartulli <ordex@autistici.org> Tested-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: NWey-Yi W Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Meenakshi Venkataraman 提交于
When BT traffic load changes from its previous state, a new LQ command needs to be sent down to the firmware. This needs to be done only once per change. The state variable that keeps track of this change is last_bt_traffic_load. However, it was not being updated when the change had been handled. Not updating this variable was causing a flood of advanced BT config commands to be sent to the firmware. Fix this. Cc: stable@vger.kernel.org #2.6.38+ Signed-off-by: NMeenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 5月, 2012 1 次提交
-
- 22 5月, 2012 8 次提交
-
-
由 Linus Torvalds 提交于
During early boot, when the scheduler hasn't really been fully set up, we really can't do blocking allocations because with certain (dubious) configurations the "might_resched()" calls can actually result in scheduling events. We could just make such users always use GFP_ATOMIC, but quite often the code that does the allocation isn't really aware of the fact that the scheduler isn't up yet, and forcing that kind of random knowledge on the initialization code is just annoying and not good for anybody. And we actually have a the 'gfp_allowed_mask' exactly for this reason: it's just that the kernel init sequence happens to set it to allow blocking allocations much too early. So move the 'gfp_allowed_mask' initialization from 'start_kernel()' (which is some of the earliest init code, and runs with preemption disabled for good reasons) into 'kernel_init()'. kernel_init() is run in the newly created thread that will become the 'init' process, as opposed to the early startup code that runs within the context of what will be the first idle thread. So by the time we reach 'kernel_init()', we know that the scheduler must be at least limping along, because we've already scheduled from the idle thread into the init thread. Reported-by: NSteven Rostedt <rostedt@goodmis.org> Cc: David Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
There is no point having the NET dependency on the select target, as it forces all users to depend on NET to tell they support BPF_JIT. Move the config option to the bottom of the file - this could be a nice place also for future "selectable" config symbols. Fix up all users to drop the dependency on NET now that it is not required to supress warnings for non-NET builds. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin由 Linus Torvalds 提交于
Pull blackfin changes from Bob Liu: "The biggest change was added an new processor(bf60x series). Bf60x series processor of blackfin can up to 1GHz with Hardware Support for HD Video Analytics, it use the same blackfin ISA but with some changes on system buses, interrupt controller and peripheral devices. Added dir arch/blackfin/mach-bf609/ and did some changes to the framework made linux working fine on the reference board bf609-ezkit now." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (41 commits) blackfin: fix build after add bf60x mach/pm.h blackfin: twi: include linux/i2c.h blackfin: bf60x: add head file for crc controller blackfin: bf60x: twi: work around temporary anomaly 0501001 blackfin: twi: Move TWI MMR access macro to twi head file blackfin: twi: Move TWI peripheral pin request array to platform data blackfin: bf60x: anomaly: Add a temporary anomaly 0501001 blackfin: bf60x: Rename the DDR controller macro blackfin: mach-bf609: pm: cleanup bfin_deepsleep blackfin: bf60x: cleanup get clock code blackfin: bf60x: pm: Add a debug option to calculate kernel wakeup time. blackfin: bf60x: add wakeup source select blackfin: bf60x: make clock changeable in kernel menuconfig blackfin:mach-bf609: fix norflash for bf609-ezkit blackfin: mach-bf609: add can_wakeup to ethernet device blackfin: remove redundant CONFIG_BF60x macro blackfin: rotary: Add pm_wakeup flag to platform data structure. bfin_gpio: fix bf548-ezkit kernel fail to boot bfin_dma: fix initcall return error in proc_dma_init() Blackfin: delete fork func ...
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull c6x updates from Mark Salter: "Clean up some c6x Kconfig items and add support for Elf FDPIC loader." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: remove unused config items C6X: add support to build with BINFMT_ELF_FDPIC C6X: change main arch kbuild symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Setup CROSS_COMPILE at the top m68k: Correct the Atari ALLOWINT definition m68k/video: Create <asm/vga.h> m68k: Make sure {read,write}s[bwl]() are always defined m68k/mm: Port OOM changes to do_page_fault() scsi/atari: Make more functions static scsi/atari: Revive "atascsi=" setup option net/ariadne: Improve debug prints m68k/atari: Change VME irq numbers from unsigned long to unsigned int m68k/amiga: Use arch_initcall() for registering platform devices m68k/amiga: Add error checks when registering platform devices m68k/amiga: Mark z_dev_present() __init m68k: Remove unused MAX_NOINT_IPL definition
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 updates from Martin Schwidefsky: "Just a random collection of bug-fixes and cleanups, nothing new in this merge request." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/ap: Fix wrong or missing comments s390/ap: move receive callback to message struct s390/dasd: re-prioritize partition detection message s390/qeth: reshuffle initialization s390/qeth: cleanup drv attr usage s390/claw: cleanup drv attr usage s390/lcs: cleanup drv attr usage s390/ctc: cleanup drv attr usage s390/ccwgroup: remove ccwgroup_create_from_string s390/qeth: stop using struct ccwgroup driver for discipline callbacks s390/qeth: switch to ccwgroup_create_dev s390/claw: switch to ccwgroup_create_dev s390/lcs: switch to ccwgroup_create_dev s390/ctcm: switch to ccwgroup_create_dev s390/ccwgroup: exploit ccwdev_by_dev_id s390/ccwgroup: introduce ccwgroup_create_dev s390: fix race on TIF_MCCK_PENDING s390/barrier: make use of fast-bcr facility s390/barrier: cleanup barrier functions s390/claw: remove "eieio" calls ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next由 Linus Torvalds 提交于
Pull sparc updates from David Miller: 1) Kill off support for sun4c and Cypress sun4m chips. And as a result we were able to also kill off that ugly btfixup thing that required multi-stage links of the final vmlinux image in the Kbuild system. This should make the kbuild maintainers really happy. Thanks a lot to Sam Ravnborg for his tireless efforts to get this going. 2) Convert sparc64 to nobootmem. I suspect now with sparc32 being a lot cleaner, it should be able to fall in line and modernize in this area too. 3) Make sparc32 use generic clockevents, from Tkhai Kirill. [ I fixed up the BPF rules, and tried to clean up the build rules too. But I don't have - or want - a sparc cross-build environment, so the BPF rule bug and the related build cleanup was all done with just a bare "make -n" pseudo-test. - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (110 commits) sparc32: use flushi when run-time patching in per_cpu_patch sparc32: fix cpuid_patch run-time patching sparc32: drop unused inline functions in srmmu.c sparc32: drop unused functions in pgtsrmmu.h sparc32,leon: move leon mmu functions to leon_mm.c sparc32,leon: remove duplicate definitions in leon.h sparc32,leon: remove duplicate UART register definitions sparc32,leon: move leon ASI definitions to asi.h sparc32: move trap table to a separate file sparc64: renamed ttable.S to ttable_64.S sparc32: Remove asm/sysen.h header. sparc32: Delete asm/smpprim.h sparc32: Remove unused empty_bad_page{,_table} declarations. sparc32: Kill boot_cpu_id4 sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.h sparc32: Remove completely unused code from asm/cache.h sparc32: Add ucmpdi2.o to obj-y instead of lib-y. sparc32: add ucmpdi2 sparc: introduce arch/sparc/Kbuild sparc: remove obsolete documentation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next由 Linus Torvalds 提交于
Pull networking changes from David Miller: 1) Get rid of the error prone NLA_PUT*() macros that used an embedded goto. 2) Kill off the token-ring and MCA networking drivers, from Paul Gortmaker. 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from Eric Dumazet. 4) Add PTP hardware clock support to IGB and IXGBE, from Richard Cochran and Jacob Keller. 5) Allow users to query timestamping capabilities of a card via ethtool, from Richard Cochran. 6) Add loadbalance mode to the teaming driver, from Jiri Pirko. Part of this is that we can now have BPF filters not attached to sockets, and the loadbalancing function is calculated using one. 7) Francois Romieu went through the network drivers removing gratuitous uses of netdev->base_addr, perhaps some day we can remove it completely but it's used for ISA probing still. 8) Add a BPF JIT for sparc. I know, who cares, right? :-) 9) Move networking sysctl registry away from using the compatability mode interfaces in the sysctl code. From Eric W Biederman. 10) Pavel Emelyanov added a way to save and restore TCP socket state via TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as well as a way to forcefully bind a socket to a port via the sk->sk_reuse value SK_FORCE_REUSE. There is also a TCP_REPAIR_OPTIONS which allows to reinstante the TCP options enabled on the connection. 11) Several enhancements from Eric Dumazet that, in particular, can enhance splice performance on TCP sockets significantly. a) Reset the offset of the per-socket sendmsg page when we know we're the only use of the page in linear_to_page(). b) Add facilities such that skb->data can be backed a page rather than SLAB kmalloc'd memory. In particular devices which were receiving into linear RX buffers can now end up providing paged data. The big result is that code like splice and GRO do not have to copy any more. 12) Allow a pure sender to more gracefully handle ACK backlogs in TCP. What can happen at high rates is that the sender hasn't grown his receive buffer limits at all (he's not receiving data so really doesn't need to), but the non-data ACKs consume receive buffer space. sk_add_backlog() is too aggressive in dropping frames in this case, so relax it's requirements by using the receive buffer plus the send buffer limit as the backlog limit instead of just the former. Also from Eric Dumazet. 13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and Chris Elston. 14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng. Basically, we can start fast retransmit before hiting the dupack threshold under certain conditions. 15) New CODEL active queue management packet scheduler, from Eric Dumazet based upon initial work by Dave Taht. Basically, the big feature is that packets are dropped (or ECN bits are set) based upon how long packets live in the queue, rather than the queue length (which is what RED uses). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits) drivers/net/stmmac: seq_file fix memory leak ipv6/exthdrs: strict Pad1 and PadN check USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z USB: qmi_wwan: Make forced int 4 whitelist generic net/ipv4: replace simple_strtoul with kstrtoul net/ipv4/ipconfig: neaten __setup placement net: qmi_wwan: Add Vodafone/Huawei K5005 support net: cdc_ether: Add ZTE WWAN matches before generic Ethernet ipv6: use skb coalescing in reassembly ipv4: use skb coalescing in defragmentation net: introduce skb_try_coalesce() net:ipv6:fixed space issues relating to operators. net:ipv6:fixed a trailing white space issue. ipv6: disable GSO on sockets hitting dst_allfrag tg3: use netdev_alloc_frag() API net: napi_frags_skb() is static ppp: avoid false drop_monitor false positives ipv6: bool/const conversions phase2 ipx: Remove spurious NULL checking in ipx_ioctl(). ...
-
- 21 5月, 2012 23 次提交
-
-
由 Linus Torvalds 提交于
This branch simplifies and clarifies the dcache lookup, and allows us to do certain nice optimizations when comparing dentries. It also cleans up the interface to __d_lookup_rcu(), especially around passing the inode information around. * dentry-cleanups: vfs: make it possible to access the dentry hash/len as one 64-bit entry vfs: move dentry name length comparison from dentry_cmp() into callers vfs: do the careful dentry name access for all dentry_cmp cases vfs: remove unnecessary d_unhashed() check from __d_lookup_rcu vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces
-
由 Linus Torvalds 提交于
This teaches vfs_fstat() to use the appropriate f[get|put]_light functions, allowing it to avoid some unnecessary locking for the common case. More noticeably, it also cleans up and simplifies the "getname_flags()" function, which now relies on the architecture strncpy_from_user() doing all the user access checks properly, instead of hacking around the fact that on x86 it didn't use to do it right (see commit 92ae03f2: "x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up"). * vfs-cleanups: VFS: make vfs_fstat() use f[get|put]_light() VFS: clean up and simplify getname_flags() x86: make word-at-a-time strncpy_from_user clear bytes at the end
-
由 Linus Torvalds 提交于
This makes cp_new_stat() a bit more readable, and avoids having to memset() the whole structure just to fill in a couple of padding fields. This is another result of me looking at code generation of functions that show up high on certain kernel profiles, and just going "Oh, let's just clean that up". Architectures that don't supply the #define to fill just the padding fields will still fall back to memset(). * stat-cleanups: vfs: don't force a big memset of stat data just to clear padding fields vfs: de-crapify "cp_new_stat()" function
-
由 Linus Torvalds 提交于
This series sanitizes the interface to unmap_vma(). The crazy interface annoyed me no end when I was looking at unmap_single_vma(), which we can spend quite a lot of time in (especially with loads that have a lot of small fork/exec's: shell scripts etc). Moving the nr_accounted calculations to where they belong at least clarifies things a little. I hope to come back to look at the performance of this later, but if/when I get back to it I at least don't have to see the crazy interfaces any more. * vm-cleanups: vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces vm: simplify unmap_vmas() calling convention
-
由 Djalal Harouni 提交于
Use single_release() instead of seq_release() to free memory allocated by single_open(). Signed-off-by: NDjalal Harouni <tixxdz@opendz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Disable IRQ when reading MMR rcv_data8 and rcv_data16. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Add a temporary anomaly 0501001 for data loss in MMR reading if interrupted. Add work around for bfin serial driver as well. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Rename the DDR controller macro from DDR0 to DMC0 to avoid confustion for bf60x. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Steven Miao 提交于
In bfin_deepsleep(), using register instead of local variable and remove unused dpmc register read. Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Remove redundance code for get clock. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Display the total time when kernel resumes normal from standby or suspend to mem mode. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Steven Miao 提交于
Support select the wakeup source for power management on bf60x. Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Bob Liu 提交于
Add clock changeable support in kernel menuconfig for bf60x. Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Bob Liu 提交于
Set smc register to async flash protocol mode and use physmap driver instead of bfin-bf6xx. Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Bob Liu 提交于
Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Sonic Zhang 提交于
Rotary can't be used as a wakeup source in all platform. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Steven Miao 提交于
Fix bf548-ezkit kernel fail to boot when request peripheral pins. Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-