- 09 2月, 2007 40 次提交
-
-
由 John Daiker 提交于
Went rummaging through usbaudio.c and found some castings that aren't needed as far as I can see. Part of the KernelJanitors TODO list. Signed-off-by: NJohn Daiker <daikerjohn@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Randy Cushman 提交于
Previously, ac97_codec.c was coded to support AD1986 and AD1986A CODECs using code written for the AD1985 CODEC. This allowed the LINE_OUT and HEADPHONE jacks to function properly, however register differences between the CODECs prevented line and microphone inputs from functioning. Specifically, this patch fixes issues with the following mixer controls: 'V_REFOUT', 'Spread Front to Surround and Center/LFE', 'Exchange Front/Surround', 'Surround Jack Mode', and 'Channel Mode'. This patch removes the undocumented AD1888 control 'High Pass Filter Enable' and adds the new control 'Exchange Mic/Line In'. Signed-off-by: NRandy Cushman <rcushman_linux@earthlink.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Randy Cushman 提交于
This patch replaces the 'V_REFOUT Enable' mixer switch control with a listbox control for the AD1985 CODEC. Previous patch 'AD1888 mixer controls for DC mode' added controls that were propogated to multiple codecs. For the AD1985 codec, the bits VREFH and VREFD function differently, preventing the 'V_REFOUT Enable' control from setting V_REFOUT to Hi-Z. This patch also corrects an issue in which register bits relating to mixer controls 'Surround Jack Mode' and 'Channel Mode'. The register bits controlled by these controls were being set at boot time to states inconsistent with the stored values of these controls. Signed-off-by: NRandy Cushman <rcushman_linux@earthlink.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the changes realted to delayed_work in soc/codecs/wm8750.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Randy Cushman 提交于
This patch fixes the Microphone and LINE_IN select logic for Analog Devices surround codecs with shared jacks. The existing code can never utilize the shared jacks for Microphone and LINE_IN due to the reversed jack selection logic. The patched code correctly selects the shared jack for input if the 'Channel Mode' selector does not specify that the jack is to be used for output. Specifically, in '2ch' mode the Center/LFE jack is used for microphone input and the Surround jack is used for LINE_IN, in '4ch' mode the Center/LFE jack is used for microphone input and the Surround jack is used for output, and in '6ch' mode both jacks are used for output. Signed-off-by: NRandy Cushman <rcushman_linux@earthlink.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Use global workqueue for simplicity instead of own workqueue in SoC core and wm8750 codes. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Use global workqueue for simplicity instead of own workqueue. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Use global workqueue for simplicity. The unsolicited event frequency isn't so high to have own queue. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Robert P. J. Day 提交于
Change the two remaining instances in the tree of kcalloc(1,...) to the corresponding kzalloc() call. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James C Georgas 提交于
The STAC9708/11 AC97 codecs implement the PCM Out Path & Mute bit in the General Purpose register (0x20:F), even though they don't implement the actual function in the mixer. Since the alsa tests for the function by toggling the bit and reading it back to see if it changed, it mistakenly creates a useless control. This patch explicitly removes the control when the codec is an STAC9708/11. I put the check in patch_sigmatel_stac9708_specific(), because I have an SBLive with this chip on it. I don't know if the STAC9758 or other codecs also behave this way. If they do, then this check could maybe go in patch_sigmatel_stac97xx_specific(), or some other more general function. Signed-off-by: NJames C Georgas <jgeorgas@rogers.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Krzysztof Helt 提交于
This is a comment fix to avoid misleading about locking in the dbri_cmdsend. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Liam Girdwood 提交于
This patch adds copyright and credit for my good friend Richard Purdie from OpenedHand for his help and code contribution throughout the development of the core code. Many thanks Richard (I guess we overlooked this in trying to get everything working well). It also adds some extra comments wrt to DAI clock matching. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Liam Girdwood 提交于
This patch removes some trailing white space from the WM9712 ASoC codec driver. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch adds the Turbo-X Coeus G610P to the alc880 config table, based on user provided information. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Johannes Berg 提交于
When the machine resumes the onyx codec might be in a weird state. Hence, simply fully reset it once (and keep the code to take it out of suspend in case the suspend of the codec chip survives a reset). Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Matt Porter 提交于
Adds support for handling EAPD on 9205 codecs Signed-off-by: NMatt Porter <mporter@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Toshimune Konno 提交于
This patch supports Audiotrack 7.1 XT. 7.1XT is almost same hardware as 7.1LT. so using 7.1 LT's code. Signed-off-by: NToshimune Konno <heitouk@nifty.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed the renamed AC97_BUS in soc/pxa/Kconfig file. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch adds limited support for Intel-based MacPro workstations. Currently, the front headphone jack is not functioning, but line out and line in are working. S/PDIF not tested. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andrew Morton 提交于
From: Andrew Morton <akpm@osdl.org> I converted the workqueues to per-device while I was there. It seems strange to create a new kernel thread (on each CPU!) and to then only have a single global work to ever be queued upon it. Plus without this, I'd have to use the _NAR stuff, gawd help me. Does that workqueue really need to be per-cpu? Does that workqueue really need to exist? Why not use keventd? Cc: Takashi Iwai <tiwai@suse.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andrew Morton 提交于
From: Andrew Morton <akpm@osdl.org> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Fixes ALSA bug#2286 Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Andrew Morton 提交于
Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Olaf Hering 提交于
create sysfs driver symlink for snd-aoa in /sys/bus/aoa-soundbus/devices/*/ Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Olaf Hering 提交于
create sysfs device symlinks for snd-aoa in /sys/class/sound/controlC0 This allows hald to recognize the device as sound device. Furthermore it allows the desktop user to actually access the sound device nodes. hald and related packages will modify the acl attributes. Fixes https://bugzilla.novell.com/show_bug.cgi?id=106294Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Randy Dunlap 提交于
fixes: include/sound/pcm.h:62: warning: 'struct snd_pcm_substream' declared inside parameter list Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Notebook. Digital playback and capture now works, but it is not bit accurate because it passes through a resampler. Bit accurate playback and capture will be implemented later via the p17v. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Implement functionallity in order to fixe ALSA bug#2058. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Teru KAMOGASHIRA 提交于
Following patch will make the driver to use the 44.1kHz SRC automatically if the pcm source is 44.1kHz signed 16bit stereo. The SRC is available in YMF754 only. Signed-off-by: NTeru KAMOGASHIRA <teru@sodan.ecc.u-tokyo.ac.jp> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Joseph Chan 提交于
This patch is VIA first release for HD audio codec, VT1708(A) and it provides geneneral HD audio driver features. Signed-off-by: NJoseph Chan <josephchan@via.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added a description about spdif_aclink option for snd-intel8x0 driver in ALSA-Configuration.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Adrian Bunk 提交于
Make the following needlessly global functions static: - dapm_power_widgets() - dapm_mux_update_power() - dapm_mixer_update_power() - dapm_free_widgets() Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Jonathan Woithe 提交于
The following patch creates a new 'Mono speaker' control in alsamixer when the Realtek 'acer' model is used with hda_intel. This is needed so the internal mono speaker (when present) can be controlled. This new control won't do anything in Acer laptops which are not fitted with a mono speaker. Acer models which are known to have a mono speaker are the C20x tablet series but there may be others. I guess we could define a new model specifically for Acers with mono speakers but this seems a bit silly given that such a model will be identical to the normal 'acer' model except for this added control. This patch also adds the C20x tablets to the list of PCI ids associated with the 'acer' model. This means that owners of C20x machines will no longer have to supply 'model=acer' when loading hda_intel. Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix compile warnings (unused variables) in patch_conexant.c without CONFIG_SND_DEBUG. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Philipp Zabel 提交于
This patch by Philipp Zabel fixes a bug whereby the BCLK matching fails when the Codec BCLK is constant and the CPU BCLK is based upon a divider. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Use snd_pci_quirk_lookup() for looking up a board config table. The config table is sorted in numerical order of PCI SSIDs. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Remove uesless typedefs and clean up the code a bit to follow the standard coding style. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed obsolete *_t typedefs in ASoC documentation. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Frank Mandarino 提交于
Changes were required to support latest AT91 header files. Also updated to remove AT91RM9200-specific code in the ASoC platform drivers to support the AT91SAM9260 and AT91SAM9261 chips, but no testing was performed on these chips. Signed-off-by: NFrank Mandarino <fmandarino@endrelia.com> Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-