- 30 10月, 2009 32 次提交
-
-
由 David Gibson 提交于
This patch separates the parts of hugetlbpage.c which are inherently specific to the hash MMU into a new hugelbpage-hash64.c file. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 David Gibson 提交于
This patch simplifies the logic used to initialize hugepages on powerpc. The somewhat oddly named set_huge_psize() is renamed to add_huge_page_size() and now does all necessary verification of whether it's given a valid hugepage sizes (instead of just some) and instantiates the generic hstate structure (but no more). hugetlbpage_init() now steps through the available pagesizes, checks if they're valid for hugepages by calling add_huge_page_size() and initializes the kmem_caches for the hugepage pagetables. This means we can now eliminate the mmu_huge_psizes array, since we no longer need to pass the sizing information for the pagetable caches from set_huge_psize() into hugetlbpage_init() Determination of the default huge page size is also moved from the hash code into the general hugepage code. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 David Gibson 提交于
Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 David Gibson 提交于
Currently we have a fair bit of rather fiddly code to manage the various kmem_caches used to store page tables of various levels. We generally have two caches holding some combination of PGD, PUD and PMD tables, plus several more for the special hugepage pagetables. This patch cleans this all up by taking a different approach. Rather than the caches being designated as for PUDs or for hugeptes for 16M pages, the caches are simply allocated to be a specific size. Thus sharing of caches between different types/levels of pagetables happens naturally. The pagetable size, where needed, is passed around encoded in the same way as {PGD,PUD,PMD}_INDEX_SIZE; that is n where the pagetable contains 2^n pointers. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 David Gibson 提交于
Currently, hpte_need_flush() only correctly flushes the given address for normal pages. Callers for hugepages are required to mask the address themselves. But hpte_need_flush() already looks up the page sizes for its own reasons, so this is a rather silly imposition on the callers. This patch alters it to mask based on the pagesize it has looked up itself, and removes the awkward masking code in the hugepage caller. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Brian King 提交于
When running Active Memory Sharing, the Collaborative Memory Manager (CMM) may mark some pages as "loaned" with the hypervisor. Periodically, the CMM will query the hypervisor for a loan request, which is a single signed value. When kexec'ing into a kdump kernel, the CMM driver in the kdump kernel is not aware of the pages the previous kernel had marked as "loaned", so the hypervisor and the CMM driver are out of sync. Fix the CMM driver to handle this scenario by ignoring requests to decrease the number of loaned pages if we don't think we have any pages loaned. Pages that are marked as "loaned" which are not in the balloon will automatically get switched to "active" the next time we touch the page. This also fixes the case where totalram_pages is smaller than min_mem_mb, which can occur during kdump. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
get_irq_desc() is a powerpc-specific version of irq_to_desc(). That is reason enough to remove it, but it also doesn't know about sparse irq_desc support which irq_to_desc() does (when we enable it). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Rather than open-coding our own check, use irq_has_action() to check if an irq has an action - ie. is "in use". irq_has_action() doesn't take the descriptor lock, but it shouldn't matter - we're just using it as an indicator that the irq is in use. disable_irq_nosync() will take the descriptor lock before doing anything also. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The irq_desc array consumes quite a lot of space, and for systems that don't need or can't have 512 irqs it's just wasted space. The first 16 are reserved for ISA, so the minimum of 32 is really 16 - and no one has asked for more than 512 so leave that as the maximum. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Linux power management subsystem supports vast amount of new PM callbacks that are crucial for proper suspend and hibernation support in drivers. This patch implements support for dev_pm_ops, preserving support for legacy callbacks. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The CHRP code has some fishy timer based code to scan the RTAS event log, which uses a 1KB stack buffer and doesn't even use the results. The pSeries code as a nicer daemon that allows userspace to read the event log and basically uses the same RTAS interface This patch moves rtasd.c out of platform/pseries and makes it usable by CHRP, after removing the old crufty event log mechanism in there. The nvram logging part of the daemon is still only available on 64-bit since the underlying nvram management routines aren't currently shared. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Some of the stuff in /proc/ppc64 such as the RTAS bits are actually useful to some 32-bit platforms. Rename the file, and create a symlink on 64-bit for backward compatibility Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Just as with kexec, hibernation may fail even on well-tested platforms: some PCI device, a driver of which doesn't play well with hibernation, is enough to break resuming. Hibernation code is not much platform dependent, and hiding features only because these were not verified on a particular hardware is counterproductive: we just prevent the features from being widely tested. For example, with this patch I just tested hibernation on a MPC83xx board, and it works quite well, modulo a few drivers that need some fixing. So, let's make it possible to select hibernation support for all PowerPCs, then let's wait for any possible bug reports, and actually fix (or just collect ;-) the bugs instead of hiding them. If some platforms really can't stand hibernation, we can make a blacklist, with proper comments why exactly hibernation doesn't work, whether it is possible to fix, and what needs to be done to fix it. CONFIG_HIBERNATION is still =n by default, so the commit doesn't change anything apart from ability to set it to =y. I'm not sure if EXPERIMENTAL dependency is needed, I'd rather not add it for a few reasons: 1) It doesn't matter much, for distro kernels user has no clue that some feature is experimental. Majority of defconfigs enable EXPERIMENTAL anyway (90 vs. 4, which, btw, means that EXPERIMENTAL is overused in Kconfigs); 2) EXPERIMENTAL is a good thing for features that change default behaviour of a kernel, while for hibernation user has to explicitly issue 'echo disk > /sys/power/state' to trigger any hibernation bugs; 3) Per init/Kconfig, EXPERIMENTAL is a good thing to scare and discourage users from 'widespread use of a feature', while we want to encourage that use. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The non-debug case in ps3/mm.c uses pr_debug(), so that the compiler still does type checks etc. and doesn't complain about unused variables in the non-debug case. However with DEBUG=n and CONFIG_DYNAMIC_DEBUG=y there's still code generated for those pr_debugs(). size before: text data bss dec hex filename 17553 4112 88 21753 54f9 arch/powerpc/platforms/ps3/mm.o size after: text data bss dec hex filename 7377 776 88 8241 2031 arch/powerpc/platforms/ps3/mm.o Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: set up mmu_ops before trying to set any ptes
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSD
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits) net: Fix 'Re: PACKET_TX_RING: packet size is too long' netdev: usb: dm9601.c can drive a device not supported yet, add support for it qlge: Fix firmware mailbox command timeout. qlge: Fix EEH handling. AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2) bonding: fix a race condition in calls to slave MII ioctls virtio-net: fix data corruption with OOM sfc: Set ip_summed correctly for page buffers passed to GRO cnic: Fix L2CTX_STATUSB_NUM offset in context memory. MAINTAINERS: rt2x00 list is moderated airo: Reorder tests, check bounds before element mac80211: fix for incorrect sequence number on hostapd injected frames libertas spi: fix sparse errors mac80211: trivial: fix spelling in mesh_hwmp cfg80211: sme: deauthenticate on assoc failure mac80211: keep auth state when assoc fails mac80211: fix ibss joining b43: add 'struct b43_wl' missing declaration b43: Fix Bugzilla #14181 and the bug from the previous 'fix' rt2x00: Fix crypto in TX frame for rt2800usb ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: sched: move rq_weight data array out of .percpu percpu: allow pcpu_alloc() to be called with IRQs off
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-param-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-param-fixes: param: fix setting arrays of bool param: fix NULL comparison on oom param: fix lots of bugs with writing charp params from sysfs, by leaking mem.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: order used ring after used index read virtio-pci: fix per-vq MSI-X request logic
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: backing-dev: ensure that a removed bdi no longer has super_block referencing it block: use after free bug in __blkdev_get block: silently error unsupported empty barriers too
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: Revert "PCI: get larger bridge ranges when space is available"
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Add a new supported 40 GigE device ID
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] zfcp: Flush SCSI registration work when adding unit [SCSI] zfcp: Fix timer initialization for ct and els requests [SCSI] zfcp: Warn about storage devices with broken PLOGI data [SCSI] zfcp: Handle WWPN mismatch in PLOGI payload [SCSI] zfcp: fix kfree handling in zfcp_init_device_setup [SCSI] fix memory leak in initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/kms: fix kms/fbdev colormap support properly. drm: Add the basic check for the detailed timing in EDID drm/radeon/kms: ignore vga arbiter return.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations. sh: Document uImage.bin target in archhelp. sh: add uImage.bin target sh: rsk7203 CONFIG_MTD=n fix sh: Check for return_to_handler when unwinding the stack sh: Build fix: define more __movmem* symbols sh: __irq_entry annotate do_IRQ(). Fix up sh/powerpc conflicts in fs/Kconfig
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4: The link() operation should return any delegation on the file NFSv4: Fix two unbalanced put_rpccred() issues. NFSv4: Fix a bug when the server returns NFS4ERR_RESOURCE nfs: Panic when commit fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fixing to avoid invalid kfree() in cifs_get_tcp_session()
-
由 Alan Cox 提交于
I've not touched the other stuff here but the word "locking" comes to mind. Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 10月, 2009 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ppc64: Use preempt_schedule_irq instead of preempt_schedule powerpc: Minor cleanup to lib/Kconfig.debug powerpc: Minor cleanup to sound/ppc/Kconfig powerpc: Minor cleanup to init/Kconfig powerpc: Limit memory hotplug support to PPC64 Book-3S machines powerpc: Limit hugetlbfs support to PPC64 Book-3S machines powerpc: Fix compile errors found by new ppc64e_defconfig powerpc: Add a Book-3E 64-bit defconfig powerpc/booke: Fix xmon single step on PowerPC Book-E powerpc: Align vDSO base address powerpc: Fix segment mapping in vdso32 powerpc/iseries: Remove compiler version dependent hack powerpc/perf_events: Fix priority of MSR HV vs PR bits powerpc/5200: Update defconfigs drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEM powerpc/boot/dts: drop obsolete 'fsl5200-clocking' of: Remove nested function mpc5200: support for the MAN mpc5200 based board mucmc52 mpc5200: support for the MAN mpc5200 based board uc101
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Do not dereference null pointer in twl4030 error path mfd: Always initialise WM831x IRQ mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6由 Linus Torvalds 提交于
* 'hwpoison-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: HWPOISON: fix invalid page count in printk output HWPOISON: Allow schedule_on_each_cpu() from keventd HWPOISON: fix/proc/meminfo alignment HWPOISON: fix oops on ksm pages HWPOISON: Fix page count leak in hwpoison late kill in do_swap_page HWPOISON: return early on non-LRU pages HWPOISON: Add brief hwpoison description to Documentation HWPOISON: Clean up PR_MCE_KILL interface
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix double IRELE in xfs_dqrele_inode
-
由 Linus Torvalds 提交于
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap4: Fix UART4 platform data on omap4 omap4: Allow omap_serial_early_init() for OMAP4430 board omap3: PM: enable UART3 module wakeups omap2: Fix console serial port number for n8x0 omap2: Fix detection of n8x0 omap1: Fix DSP public peripherals support for ams-delta omap1: Fix redundant UARTs pin muxing that can break other hardware support omap: iommu: fix wrong condition check for SUPERSECTION omap: SDMA: Fix omap_stop_dma() API for channel linking omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
-
git://git.infradead.org/ubi-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: fix check on unsigned long UBI: fix backward compatibility
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Fix VID reading on IT8718F/IT8720F hwmon: (dme1737) No vid attributes for SCH311x hwmon: (fschmd) Fix check on unsigned in watchdog_write() hwmon: (coretemp) Maintainer update
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6由 Linus Torvalds 提交于
* 'urgent-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: do not load the pd6729 driver if io_base is NULL pcmcia: Fix possible printk format warnings pcmcia: do not try to store more than 4 version strings pcmcia: pccard_read_tuple and TUPLE_RETURN_COMMON cleanup pcmcia: properly close previous dev_printk if kzalloc fails in do_io_probe pcmcia: fix controller printk format warnings
-