- 15 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
The Biostar mobo seems to give a wrong DMA position, resulting in stuttering or skipping sounds on 2.6.34. Since the commit 7b3a177b, "ALSA: pcm_lib: fix "something must be really wrong" condition", makes the position check more strictly, the DMA position problem is revealed more clearly now. The fix is to use only LPIB for obtaining the position, i.e. passing position_fix=1. This patch adds a static quirk to achieve it as default. Reported-by: NFrank Griffin <ftg@roadrunner.com> Cc: Eric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joerg Schirottke 提交于
Added the matching model for Clevo laptop M570U. Signed-off-by: NJoerg Schirottke <master@kanotix.com> Tested-by: NMaximilian Gerhard <maxbox@directbox.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Some VIA codecs have no multiple source selection for headphone pins, thus it's useless (and wrong) to create "Independent HP" control on them. This patch adds the check of connections to skip the control in such a case. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The commit 5b0cb1d8 ALSA: hda - add more NID->Control mapping breaks the control element allocation by returning a wrong value. Let's fix it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
A few enhancement / fixes for fix-up table of some Realtek codecs: - Apply fix-ups only for the auto model - Apply additional verbs after normal init verbs - Add a debug print to show the fix-up application This is basically a preliminary work for the next fix for Sony VAIO. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 4月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
The widget connections of ADC of ALC880 and ALC2260 aren't initialized, thus it might point to invalid pin. This can be a problem when mode=auto and there is only one input pin. Then user can't change the connection at all. This patch adds the code to initialize the input pin connection of these codecs. Reference: Novell bnc#594363 https://bugzilla.novell.com/show_bug.cgi?id=594363Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Corrected HP and mic pins for ALC269vb amic and dmic models. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
ALC269vb has an alternative HP pin 0x21 in addition. Fix the parser to recognize it. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2010 1 次提交
-
-
由 Maurus Cuelenaere 提交于
This adds support for the Medion WIM2160 soundcard. There's no PCI quirk added because it has the same PCI id as the Medion MD2. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
The commit 6a4f2ccb introduced a wrong comparision for the array range check, which effectively skips the whole initialization of DAC connections. Fixed now. Reference: bko#15689 https://bugzilla.kernel.org/show_bug.cgi?id=15689Reported-by: NAdrian Ulrich <kernel@blinkenlights.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
After more tests it appears that EAPD needs to be enabled on both the 0x14 and 0x15 NIDs to enable the main speaker and headphone amplifiers. The maximum volume setting is now equal to what the machine achieves under other operating systems. Disabling Front or LFE playback triggers EAPD and disables the amplifier. As such, these two playback switches have been removed from the mixer. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 4月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
The device needs MSI disablement. Added to the quirk list. Reported-by: NHarald Dunkel <harri@afaics.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 4月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2010 1 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/551606 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_ad1981() for all models using the Thinkpad quirk. Reported-by: Jane Silber Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 3月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
ALC269 codec has a few different variants, and each of them may have different ADC and MUX widgets. For example, one model has ADC 0x08 with MUX 0x23 while others has ADC 0x09 or ADC 0x07 with MUX 022 or 0x24. The difference of ADC appears usually as the capability of the digital mic pin (0x12), and the current driver sometimes misses the internal mic pin due to the mismatching ADC. This patch adds a bit more clever way to find the matching ADC instead of the static list. Now the driver checks all active input pins and fills only the ADC/MUX's that contain all of them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The mask and value parameters passed to snd_hda_codec_amp_stereo() should be 8-bit values for mute and volume. Passing AMP_IN_MUTE() is wrong, which is found in many places in patch_realtek.c as a left-over from the conversion to snd_hda_codec_amp_stereo(). Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=575669 The OR states that position_fix=1 is necessary to work around glitching during volume adjustments using PulseAudio. Reported-by: NCarlos Laviola <claviola@debian.org> Tested-by: NCarlos Laviola <claviola@debian.org> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Skip initialization of connections of DAC widgets that aren't used, which resulted in invalid verb parameters. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2010 4 次提交
-
-
由 Takashi Iwai 提交于
alc_free_kctls() has to be called after all jobs done in alc_build_controls(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Derek Kelly 提交于
This patch adds the device id for Nvidia GT220 cards to the nvhdmi driver. I have tested it and confirmed it to be working. Original patch download link: https://gist.github.com/324070/Signed-off-by: NDerek Kelly <user.vdr@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/420578 The OR has verified that his hardware distorts because of the 0 dB offset not corresponding to the highest PCM level. Fix this by capping said PCM level to 0 dB similarly to what we do for CX20549 (Venice). Reported-by: NMike Pontillo <pontillo@gmail.com> Tested-by: NMike Pontillo <pontillo@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 3月, 2010 1 次提交
-
-
由 Kunal Gangakhedkar 提交于
Adding this PCI quirk fixes the board config detection. This also fixes jack sensing by using "hp_detect=1" via properly detected board config. Signed-off-by: NKunal Gangakhedkar <kunal.gangakhedkar@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 3月, 2010 12 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
-
由 Jeff Garzik 提交于
The content was deleted in cc87edb1, but the file remained as a zero-length file. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits) ceph: update for write_inode API change ceph: reset osd after relevant messages timed out ceph: fix flush_dirty_caps race with caps migration ceph: include migrating caps in issued set ceph: fix osdmap decoding when pools include (removed) snaps ceph: return EBADF if waiting for caps on closed file ceph: set osd request message front length correctly ceph: reset front len on return to msgpool; BUG on mismatched front iov ceph: fix snaptrace decoding on cap migration between mds ceph: use single osd op reply msg ceph: reset bits on connection close ceph: remove bogus mds forward warning ceph: remove fragile __map_osds optimization ceph: fix connection fault STANDBY check ceph: invalidate_authorizer without con->mutex held ceph: don't clobber write return value when using O_SYNC ceph: fix client_request_forward decoding ceph: drop messages on unregistered mds sessions; cleanup ceph: fix comments, locking in destroy_inode ceph: move dereference after NULL test ... Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial white space [CIFS] checkpatch cleanup cifs: add cifs_revalidate_file cifs: add a CIFSSMBUnixQFileInfo function cifs: add a CIFSSMBQFileInfo function cifs: overhaul cifs_revalidate and rename to cifs_revalidate_dentry
-
- 19 3月, 2010 3 次提交
-
-
由 Peter Korsgaard 提交于
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-