Remove ustats_seq, IPVS_STAT_INC and IPVS_STAT_ADD
because they are not used. They were replaced with u64_stats.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	Currently, the new percpu counters are not zeroed and
the zero commands do not work as expected, we still show the old
sum of percpu values. OTOH, we can not reset the percpu counters
from user context without causing the incrementing to use old
and bogus values.

 	So, as Eric Dumazet suggested fix that by moving all overhead
to stats reading in user context. Do not introduce overhead in
timer context (estimator) and incrementing (packet handling in
softirqs).

 	The new ustats0 field holds the zero point for all
counter values, the rates always use 0 as base value as before.
When showing the values to user space just give the difference
between counters and the base values. The only drawback is that
percpu stats are not zeroed, they are accessible only from /proc
and are new interface, so it should not be a compatibility problem
as long as the sum stats are correct after zeroing.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	The global tot_stats contains cpustats field just like the
stats for dest and svc, so better use it to simplify the usage
in estimation_timer. As tot_stats is registered as estimator
we can remove the special ip_vs_read_cpu_stats call for
tot_stats. Fix ip_vs_read_cpu_stats to be called under
stats lock because it is still used as synchronization between
estimation timer and user context (the stats readers).

 	Also, make sure ip_vs_stats_percpu_show reads properly
the u64 stats from user context.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	Remove include/net/netns/ip_vs.h because it depends on
structures from include/net/ip_vs.h. As ipvs is pointer in
struct net it is better to move struct netns_ipvs into
include/net/ip_vs.h, so that we can easily use other structures
in struct netns_ipvs.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

There's no sense to 'ct = ct = ' in ip_vs_notrack(). Just assign
nf_ct_get()'s return value directly to the pointer variable 'ct' once.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NSimon Horman <horms@verge.net.au>

The semantic patch that makes this output is available
in scripts/coccinelle/api/memdup.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	ip_vs_read_cpu_stats is called only from timer, so
no need for _bh locks.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	Restore the previous behaviour to lookup for fwmark
service only when fwmark is non-null. This saves only CPU.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Message in log because sysctl table was not empty at netns exit
 WARNING: at net/sysctl_net.c:84 sysctl_net_exit+0x2a/0x2c()

Instrumenting showed that the nf_conntrack_timestamp was the entry
that was being created but not cleared.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

As Stephen correctly points out, we need to return -ENOENT in
xt_find_match()/xt_find_target() after the patch "netfilter: x_tables:
misuse of try_then_request_module" in order to properly indicate
a non-existant module to the caller.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Since xt_find_match() returns ERR_PTR(xx) on error not NULL,
the macro try_then_request_module won't work correctly here.
The macro expects its first argument will be zero if condition
fails. But ERR_PTR(-ENOENT) is not zero.

The correct solution is to propagate the error value
back.

Found by inspection, and compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

net/netfilter/ipset/ip_set_core.c:615: warning: ‘clash’ may be used uninitialized in this function
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This patch fixes the out of sync scenarios while in SYN_RECV state.

Quoting Jozsef, what it happens if we are out of sync if the
following:

> > b. conntrack entry is outdated, new SYN received
> >    - (b1) we ignore it but save the initialization data from it
> >    - (b2) when the reply SYN/ACK receives and it matches the saved data,
> >      we pick up the new connection
This is what it should happen if we are in SYN_RECV state. Initially,
the SYN packet hits b1, thus we save data from it. But the SYN/ACK
packet is considered a retransmission given that we're in SYN_RECV
state. Therefore, we never hit b2 and we don't get in sync. To fix
this, we ignore SYN/ACK if we are in SYN_RECV. If the previous packet
was a SYN, then we enter the ignore case that get us in sync.

This patch helps a lot to conntrackd in stress scenarios (assumming a
client that generates lots of small TCP connections). During the failover,
consider that the new primary has injected one outdated flow in SYN_RECV
state (this is likely to happen if the conntrack event rate is high
because the backup will be a bit delayed from the primary). With the
current code, if the client starts a new fresh connection that matches
the tuple, the SYN packet will be ignored without updating the state
tracking, and the SYN+ACK in reply will blocked as it will not pass
checkings III or IV (since all state tracking in the original direction
is not initialized because of the SYN packet was ignored and the ignore
case that get us in sync is not applied).

I posted a couple of patches before this one. Changli Gao spotted
a simpler way to fix this problem. This patch implements his idea.

Cc: Changli Gao <xiaosuo@gmail.com>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

lc and wlc use the same formula, but lblc and lblcr use another one. There
is no reason for using two different formulas for the lc variants.

The formula used by lc is used by all the lc variants in this patch.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Acked-by: NWensong Zhang <wensong@linux-vs.org>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

When IP_VS schedulers do not find a destination, they output a terse
"WLC: no destination available" message through kernel syslog, which I
can not only make sense of because syslog puts them in a logfile
together with keepalived checker results.

This patch makes the output a bit more informative, by telling you which
virtual service failed to find a destination.

Example output:

kernel: [1539214.552233] IPVS: wlc: TCP 192.168.8.30:22 - no destination available
kernel: [1539299.674418] IPVS: wlc: FWM 22 0x00000016 - no destination available

I have tested the code for IPv4 and FWM services, as you can see from
the example; I do not have an IPv6 setup to test the third code path
with.

To avoid code duplication, I put a new function ip_vs_scheduler_err()
into ip_vs_sched.c, and use that from the schedulers instead of calling
IP_VS_ERR_RL directly.
Signed-off-by: NPatrick Schaaf <netdev@bof.de>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	Remove code that should not be called anymore.
Now when ip_vs_out handles replies for local clients at
LOCAL_IN hook we do not need to call conn_out_get and
handle_response_icmp from ip_vs_in_icmp* because such
lookups were already performed for the ICMP packet and no
connection was found.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

 	Fix get_curr_sync_buff to keep buffer for 2 seconds
as intended, not just for the current jiffie. By this way
we will sync more connection structures with single packet.
Signed-off-by: NTinggong Wang <wangtinggong@gmail.com>
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

nfct happens to run after the raw table only.
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This reverts commit 44bd4de9.

I have to revert the early loop termination in connlimit since it generates
problems when an iptables statement does not use -m state --state NEW before
the connlimit match extension.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Struct tmp is copied from userspace.  It is not checked whether the "name"
field is NULL terminated.  This may lead to buffer overflow and passing
contents of kernel stack as a module name to try_then_request_module() and,
consequently, to modprobe commandline.  It would be seen by all userspace
processes.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

The patch below introduces an early termination of the loop that is
counting matches. It terminates once the counter has exceeded the
threshold provided by the user. There's no point in continuing the loop
afterwards and looking at other entries.

It plays together with the following code further below:

return (connections > info->limit) ^ info->inverse;

where connections is the result of the counted connection, which in turn
is the matches variable in the loop. So once

        -> matches = info->limit + 1
alias   -> matches > info->limit
alias   -> matches > threshold

we can terminate the loop.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

When SYSCTL and PROC_FS and NETFILTER_NETLINK are not enabled:

net/built-in.o: In function `try_to_load_type':
ip_set_core.c:(.text+0x3ab49): undefined reference to `nfnl_unlock'
ip_set_core.c:(.text+0x3ab4e): undefined reference to `nfnl_lock'
...
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

'!' has higher precedence than '&'.  IP_VS_STATE_MASTER is 0x1 so
the original code is equivelent to if (!ipvs->sync_state) ...
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Use sctp_app_lock instead of tcp_app_lock in the SCTP protocol module.

This appears to be a typo introduced by the netns changes.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com>

Add a new 'devgroup' match to match on the device group of the
incoming and outgoing network device of a packet.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

When a message carries multiple commands and one of them triggers
an error, we have to report to the userspace which one was that.
The line number of the command plays this role and there's an attribute
reserved in the header part of the message to be filled out with the error
line number. In order not to modify the original message received from
the userspace, we construct a new, complete netlink error message and
modifies the attribute there, then send it.
Netlink is notified not to send its ACK/error message.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Add a dummy ip_set_get_ip6_port function that unconditionally
returns false for CONFIG_IPV6=n and convert the real function
to ipv6_skip_exthdr() to avoid pulling in the ip6_tables module
when loading ipset.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Don't fall through in the switch statement, otherwise IPv4 headers
are incorrectly parsed again as IPv6 and the return value will always
be 'false'.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Signed-off-by: NPatrick McHardy <kaber@trash.net>

ip_vs_sync_cleanup() may be called from ip_vs_init() on error
and thus needs to be accesible from section __init
Reporte-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Tested-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

This is a rather naieve approach to allowing PVS to compile with
CONFIG_SYSCTL disabled.  I am working on a more comprehensive patch which
will remove compilation of all sysctl-related IPVS code when CONFIG_SYSCTL
is disabled.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Tested-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

These variables are unused as a result of the recent netns work.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Tested-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Signed-off-by: NSimon Horman <horms@verge.net.au>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Tested-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHans Schillstrom <hans@schillstrom.com>
Tested-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>

net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_parse_tuple':
net/netfilter/nf_conntrack_netlink.c:832:11: warning: comparison between 'enum ctattr_tuple' and 'enum ctattr_type'

Use ctattr_type for the 'type' parameter since that's the type of all attributes
passed to this function.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

None of the set types need uaccess.h since this is handled centrally
in ip_set_core. Most set types additionally don't need bitops.h and
spinlock.h since they use neither. tcp.h is only needed by those
using before(), udp.h is not needed at all.
Signed-off-by: NPatrick McHardy <kaber@trash.net>

Replace calls of the form:

nla_parse(tb, ATTR_MAX, nla_data(attr), nla_len(attr), policy)

by:

nla_parse_nested(tb, ATTR_MAX, attr, policy)
Signed-off-by: NPatrick McHardy <kaber@trash.net>