Now we can remove old wrappers for dellink.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rocker, bonding and team and switch over to the new
switchdev_port_bridge_dellink to avoid duplicating code in each driver.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Same change as setlink.  Provide the wrapper op for SELF ndo_bridge_dellink
and call into the switchdev driver to delete afspec VLANs.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is revert of:

commit 68e331c7 ("bridge: offload bridge port attributes to switch asic
if feature flag set")

Restore br_setlink back to original and don't call into SELF port driver.
rtnetlink.c:bridge_setlink() already does a call into port driver for SELF.

bridge set link cmd defaults to MASTER.  From man page for bridge link set
cmd:

       self   link setting is configured on specified physical device

       master link setting is configured on the software bridge (default)

The link setting has two values: the device-side value and the software
bridge-side value.  These are independent and settable using the bridge
link set cmd by specifying some combination of [master] | [self].
Furthermore, the device-side and bridge-side settings have their own
initial value, viewable from bridge -d link show cmd.

Restoring br_setlink back to original makes rocker (the only in-kernel user
of SELF link settings) work as first implement: two-sided values.

It's true that when both MASTER and SELF are specified from the command,
two netlink notifications are generated, one for each side of the settings.
The user-space app can distiquish between the two notifications by
observing the MASTER or SELF flag.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New attr-based bridge_setlink can recurse lower devs and recover on err, so
remove old wrapper (including ndo_dflt_switchdev_port_bridge_setlink).
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rocker, bonding, and team can now use the switchdev bridge setlink to parse
raw netlink; no need to duplicate this code in each driver.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new switchdev_port_bridge_setlink that can be used by drivers
implementing .ndo_bridge_setlink to set switchdev bridge attributes.
Basically turn the raw rtnl_bridge_setlink netlink into switchdev attr
sets.  Proper netlink attr policy checking is done on the protinfo part of
the netlink msg.

Currently, for protinfo, only bridge port attrs BR_LEARNING and
BR_LEARNING_SYNC are parsed and passed to port driver.

For afspec, VLAN objs are passed so switchdev driver can set VLANs assigned
to SELF.  To illustrate with iproute2 cmd, we have:

	bridge vlan add vid 10 dev sw1p1 self master

To add VLAN 10 to port sw1p1 for both the bridge (master) and the device
(self).
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rocker: use switchdev get/set attr for bridge port flags
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VLAN obj has flags (PVID and untagged) as well as start and end vid ranges.
The switchdev driver can optimize programing the device using the ranges.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like switchdev attr get/set, add new switchdev obj add/del.  switchdev objs
will be things like VLANs or FIB entries, so add/del fits better for
objects than get/set used for attributes.

Use same two-phase prepare-commit transaction model as in attr set.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

STP update is just a settable port attribute, so convert
switchdev_port_stp_update to an attr set.

For DSA, the prepare phase is skipped and STP updates are only done in the
commit phase.  This is because currently the DSA drivers don't need to
allocate any memory for STP updates and the STP update will not fail to HW
(unless something horrible goes wrong on the MDIO bus, in which case the
prepare phase wouldn't have been able to predict anyway).
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For rocker, support prepare-commit transaction model for setting attributes
(and for adding objects).  This requires rocker to preallocate memory
needed for the commit up front in the prepare phase.  Since rtnl_lock is
held between prepare-commit, store the allocated memory on a queue hanging
off of the rocker_port.  Also, in prepare phase, do everything right up to
calling into HW.  The same code paths are tranversed in the driver for both
prepare and commit phases.  In some cases, any state modified in the
prepare phase must be reverted before returning so the commit phase makes
the same decisions.

As a consequence of holding rtnl_lock in process context for all attr sets
(and obj adds), all memory is GFP_KERNEL allocated and we don't need to
busy spin waiting for the device to complete the command.  So the bulk of
this patch is simplifying the memory allocations to only use GFP_KERNEL and
to remove the nowait flag and busy spin loop.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switch ID is just a gettable port attribute.  Convert switchdev op
switchdev_parent_id_get to a switchdev attr.

Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is
called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only
port netdevs.  So when a port is stacked under bond/bridge, the user can
only query switch id via the switch ports, but not via the upper devices
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add two new swdev ops for get/set switch port attributes.  Most swdev
interactions on a port are gets or sets on port attributes, so rather than
adding ops for each attribute, let's define clean get/set ops for all
attributes, and then we can have clear, consistent rules on how attributes
propagate on stacked devs.

Add the basic algorithms for get/set attr ops.  Use the same recusive algo
to walk lower devs we've used for STP updates, for example.  For get,
compare attr value for each lower dev and only return success if attr
values match across all lower devs.  For sets, set the same attr value for
all lower devs.  We'll use a two-phase prepare-commit transaction model for
sets.  In the first phase, the driver(s) are asked if attr set is OK.  If
all OK, the commit attr set in second phase.  A driver would NACK the
prepare phase if it can't set the attr due to lack of resources or support,
within it's control.  RTNL lock must be held across both phases because
we'll recurse all lower devs first in prepare phase, and then recurse all
lower devs again in commit phase.  If any lower dev fails the prepare
phase, we need to abort the transaction for all lower devs.

If lower dev recusion isn't desired, allow a flag SWITCHDEV_F_NO_RECURSE to
indicate get/set only work on port (lowest) device.
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Turned out that "switchdev" sticks. So just unify all related terms to use
this prefix.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Turned out that "switchdev" sticks. So just unify all related terms to use
this prefix.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a GRED qdisc, if the default "virtual queue" (VQ) does not have drop
parameters configured, then packets for the default VQ are not subjected
to RED and are only dropped if the queue is larger than the net_device's
tx_queue_len. This behavior is useful for WRED mode, since these packets
will still influence the calculated average queue length and (therefore)
the drop probability for all of the other VQs. However, for some drivers
tx_queue_len is zero. In other cases the user may wish to make the limit
the same for all VQs (including the default VQ with no drop parameters).

This change adds a TCA_GRED_LIMIT attribute to set the GRED queue limit,
in bytes, during qdisc setup. (This limit is in bytes to be consistent
with the drop parameters.) The default limit is the same as for a bfifo
queue (tx_queue_len * psched_mtu). If the drop parameters of any VQ are
configured with a smaller limit than the GRED queue limit, that VQ will
still observe the smaller limit instead.
Signed-off-by: NDavid Ward <david.ward@ll.mit.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas Schichan <nschichan@freebox.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Refactor netdev page frags and move them into mm/

This patch series addresses several things.

First I found an issue in the performance of the pfmemalloc check from
build_skb.  To work around it I have provided a cached copy of pfmemalloc
to be used in __netdev_alloc_skb and __napi_alloc_skb.

Second I moved the page fragment allocation logic into the mm tree and
added functionality for freeing page fragments.  I had to fix igb before I
could do this as it was using a reference to NETDEV_FRAG_PAGE_MAX_SIZE
incorrectly.

Finally I went through and replaced all of the duplicate code that was
calling put_page and replaced it with calls to skb_free_frag.

With these changes in place a simple receive and drop test increased from a
packet rate of 8.9Mpps to 9.8Mpps.  The gains breakdown as follows:

8.9Mpps	Before			9.8Mpps	After
------------------------	------------------------
7.8%	put_compound_page	9.1%	__free_page_frag
3.9%	skb_free_head
1.1%	put_page

4.9%	build_skb		3.8%	__napi_alloc_skb
2.5%	__alloc_rx_skb
1.9%	__napi_alloc_skb
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change adds a function called skb_free_frag which is meant to
compliment the function netdev_alloc_frag.  The general idea is to enable a
more lightweight version of page freeing since we don't actually need all
the overhead of a put_page, and we don't quite fit the model of __free_pages.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change moves the __alloc_page_frag functionality out of the networking
stack and into the page allocation portion of mm.  The idea it so help make
this maintainable by placing it with other page allocation functions.

Since we are moving it from skbuff.c to page_alloc.c I have also renamed
the basic defines and structure from netdev_alloc_cache to page_frag_cache
to reflect that this is now part of a different kernel subsystem.

I have also added a simple __free_page_frag function which can handle
freeing the frags based on the skb->head pointer.  The model for this is
based off of __free_pages since we don't actually need to deal with all of
the cases that put_page handles.  I incorporated the virt_to_head_page call
and compound_order into the function as it actually allows for a signficant
size reduction by reducing code duplication.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change makes it so that we store the virtual address of the page
in the netdev_alloc_cache instead of the page pointer.  The idea behind
this is to avoid multiple calls to page_address since the virtual address
is required for every access, but the page pointer is only needed at
allocation or reset of the page.

While I was at it I also reordered the netdev_alloc_cache structure a bit
so that the size is always 16 bytes by dropping size in the case where
PAGE_SIZE is greater than or equal to 32KB.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change updates igb so that it will correctly perform the descriptor
count calculation.  Previously it was taking NETDEV_FRAG_PAGE_MAX_SIZE
into account with isn't really correct since a different value is used to
determine the size of the pages used for TCP.  That is actually determined
by SKB_FRAG_PAGE_ORDER.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While testing I found that the testing for pfmemalloc in build_skb was
rather expensive.  I found the issue to be two-fold.  First we have to get
from the virtual address to the head page and that comes at the cost of
something like 11 cycles.  Then there is the cost for reading pfmemalloc out
of the head page which can be cache cold due to the fact that
put_page_testzero is likely invalidating the cache-line on one or more
CPUs as the fragments can be shared.

To avoid this extra expense I have added a pfmemalloc member to the
netdev_alloc_cache.  I then pushed pieces of __alloc_rx_skb into
__napi_alloc_skb and __netdev_alloc_skb so that I could rewrite them to
make use of the cached pfmemalloc value.  The result is that my perf traces
show a reduction from 9.28% overhead to 3.7% for the code covered by
build_skb, __alloc_rx_skb, and __napi_alloc_skb when performing a test with
the packet being dropped instead of being handed to napi_gro_receive.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only left enqueue_root() user is netem, and it looks not necessary :

qdisc_skb_cb(skb)->pkt_len is preserved after one skb_clone()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use one return statement instead of two to simplify the code.
Both are returning the same value.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This enables the ethtool's "-d" and "--register-dump"
options for fec devices.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This should have been #ifdef not #if.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Fixes: d2788d34 ("net: sched: further simplify handle_ing")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
handle_ing update

These are a couple of cleanups to make ingress a bit more lightweight.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ingress qdisc has no other purpose than calling into tc_classify()
that executes attached classifier(s) and action(s).

It has a 1:1 relationship to dev->ingress_queue. After having commit
087c1a60 ("net: sched: run ingress qdisc without locks") removed
the central ingress lock, one major contention point is gone.

The extra indirection layers however, are not necessary for calling
into ingress qdisc. pktgen calling locally into netif_receive_skb()
with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon
E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps.

We can redirect the private classifier list to the netdev directly,
without changing any classifier API bits (!) and execute on that from
handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed,
ingress qdisc doesn't have a queue and thus dev_deactivate_queue()
is also not applicable, ingress_cl_list provides similar behaviour.
In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc.

One next possible step is the removal of the dev's ingress (dummy)
netdev_queue, and to only have the list member in the netdevice
itself.

Note, the filter chain is RCU protected and individual filter elements
are being kfree'd by sched subsystem after RCU grace period. RCU read
lock is being held by __netif_receive_skb_core().

Joint work with Alexei Starovoitov.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Given quite some code has been removed from ing_filter(), we can just
consolidate that function into handle_ing() and get rid of a few
instructions at the same time.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extend the testcase to catch a signedness bug in the arm64 JIT:

test_bpf: #58 load 64-bit immediate jited:1 ret -1 != 1 FAIL (1 times)

This is useful to ensure other JITs won't have a similar bug.

Link: https://lkml.org/lkml/2015/5/8/458
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jonathan Toppins says:

====================
add netlink support for new lacp bonding parameters

This is a resubmit of Mahesh's last 3 bonding patches from this series
(http://marc.info/?l=linux-netdev&m=142432864626179&w=2) with one
additional kernel patch which adds the netlink bits. I have noted any
modifications I did to the original patches just above my signoff line.
Patch 5 is the iproute2 support for these bonding options. All patches
were coded against the net-next branch of their respective projects.

v2:
  * rebased
  * only send these new parameters via netlink when bond is in mode 4
  * fixed ad_actor_sys_prio to be 0xFFFF by default even when the bond
    is initially created in mode 0 and switched to mode 4

v3:
  * reverted changes to bond_option_ad_actor_system_set() from v1 in Mahesh's
    patch "bonding: Allow userspace to set actors' macaddr in an AD-system."
    Instead implementing all setting in the option specific set function as
    Nik suggested.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds netlink support for the following bonding options:
* BOND_OPT_AD_ACTOR_SYS_PRIO
* BOND_OPT_AD_ACTOR_SYSTEM
* BOND_OPT_AD_USER_PORT_KEY

When setting the actor system mac address we assume the netlink message
contains a binary mac and not a string representation of a mac.
Signed-off-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
[jt: completed the setting side of the netlink attributes]
Signed-off-by: NJonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: NNikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>