This patch checks kmem_cache_create() error and aborts loading module
on failure.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

For case of bridging pseudo devices, the get created/destroyed (Xen)
need to allow setting address to any valid value.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

Need to tell STP daemon about more events, like any time a
device is added even when it is down.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

This patchset based on work by Aji_Srinivas@emc.com provides allows
spanning tree to be controled from userspace.  Like hotplug, it
uses call_usermodehelper when spanning tree is enabled so there
is no visible API change. If call to start usermode STP fails
it falls back to existing kernel STP.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

The RSTP daemon needs to be able to flush all dynamic forwarding
entries in the case of topology change.

This is a temporary interface. It will change to a netlink interface
before RSTP daemon is officially released.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

Instead of hashing the whole Ethernet address, it should be faster
to just use the last 4 bytes. Add a random salt value to the hash
to make it more difficult to construct worst case DoS hash chains.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

While in the STP learning state, don't route packets; wait until
forwarding delay has expired. The purpose of the forwarding delay
is to detect loops in the network, and if a brouter started up
and started forwarding, it could cause a flood.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

Change the bridging hook to be simple function with return value
rather than modifying the skb argument. This could generate better
code and is cleaner.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>

When a transmitted packet is looped back directly, CHECKSUM_PARTIAL
maps to the semantics of CHECKSUM_UNNECESSARY.  Therefore we should
treat it as such in the stack.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When csum_offset was introduced we did a conversion from csum to
csum_offset where applicable.  A couple of drivers were missed in
this process.

It was harmless to begin with since the two fields coincided.  Now
that we've made them different with the addition of csum_start, the
missed drivers must be converted or they can't send packets out at
all that require checksum offload.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The skb transport pointer is currently used to specify the start
of the checksum region for transmit checksum offload.  Unfortunately,
the same pointer is also used during receive side processing.

This creates a problem when we want to retransmit a received
packet with partial checksums since the skb transport pointer
would be overwritten.

This patch solves this problem by creating a new 16-bit csum_start
offset value to replace the skb transport header for the purpose
of checksums.  This offset is calculated from skb->head so that
it does not have to change when skb->data changes.

No extra space is required since csum_offset itself fits within
a 16-bit word so we can use the other 16 bits for csum_start.

For backwards compatibility, just before we push a packet with
partial checksums off into the device driver, we set the skb
transport header to what it would have been under the old scheme.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

esp_init_state doesn't account for the beet pseudo header in the header_len
calculation, which may result in undersized skbs hitting xfrm4_beet_output,
causing unnecessary reallocations in ip_finish_output2.

The skbs should still always have enough room to avoid causing
skb_under_panic in skb_push since we have at least 16 bytes available
from LL_RESERVED_SPACE in xfrm_state_check_space.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the probing based MTU estimation, which usually takes 2-3 iterations
to find a fitting value and may underestimate the MTU, by an exact calculation.

Also fix underestimation of the XFRM trailer_len, which causes unnecessary
reallocations.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer
conversion:

-       *(u8*)(trailer->tail - 1) = top_iph->protocol;
+       *(skb_tail_pointer(skb) - 1) = top_iph->protocol;

-       *(u8 *)(trailer->tail - 1) = *skb_network_header(skb);
+       *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb);
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we're increasing the headroom, the header offsets need to be
increased by the same amount as well.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When looking up route for destination with rules with
source address restrictions, we may need to find a source
address for the traffic if not given.

Based on patch from Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary initialization/variable.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The most common trigger of these errors is that the
config option hasn't been enable wich would make the
functionality available. Therefore returning EOPNOTSUPP
gives a better idea on what is going wrong.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move generic skbuff stuff from XFRM code to generic code so that
AF_RXRPC can use it too.

The kdoc comments I've attached to the functions needs to be checked
by whoever wrote them as I had to make some guesses about the workings
of these functions.
Signed-off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

We have to put back the cast to "char *" because these
pointers are volatile.

Reported by Andrew Morton.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Network drivers which keep stats allocate their own stats structure
then write a get_stats() function to return them.  It would be nice if
this were done by default.

1) Add a new "stats" field to "struct net_device".
2) Add a new feature field to say "this driver uses the internal one"
3) Have a default "get_stats" which returns NULL if that feature not set.
4) Change callers to check result of get_stats call for NULL, not if
   ->get_stats is set.

This should not break backwards compatibility with older drivers, yet
allow modern drivers to shed some boilerplate code.

Lightly tested: works for a modified lguest network driver.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to get more randomness for secure_tcpv6_sequence_number(),
secure_tcp_sequence_number(), secure_dccp_sequence_number() functions,
we can use the high resolution time services, providing nanosec
resolution.

I've also done two kmalloc()/kzalloc() conversions.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To clearly state the intent of copying from linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For consistency with other skb data accessors, reducing the number of direct
accesses to skb->data.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As IPPROTO_TCP is 6, it makes sense to make sure inet_protos[] array
is properly cache line aligned to avoid false sharing on SMP.

c0680540 b peer_total
c0680544 b inet_peer_unused_head
c0680560 B inet_protos

On i386 this example, we can see that inet_protos[IPPROTO_TCP] shares
a potentially hot (and modified) cache line.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_memory_pressure and tcp_socket currently share a cache line with tcp_memory_allocated, tcp_sockets_allocated.
(Very hot cache line)
It makes sense to declare these variables as __read_mostly, to avoid false sharing on SMP.

ffffffff8081d9c0 B tcp_orphan_count
ffffffff8081d9c4 B tcp_memory_allocated
ffffffff8081d9c8 B tcp_sockets_allocated
ffffffff8081d9cc B tcp_memory_pressure
ffffffff8081d9d0 b tcp_md5sig_users
ffffffff8081d9d8 b tcp_md5sig_pool
ffffffff8081d9e0 b warntime.31570
ffffffff8081d9e8 b tcp_socket
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The results of FIB rules lookups are cached in the routing cache
except for IPv6 as no such cache exists. So far, it was the
responsibility of the user to flush the cache after modifying any
rules. This lead to many false bug reports due to misunderstanding
of this concept.

This patch automatically flushes the route cache after inserting
or deleting a rule.

Thanks to Muli Ben-Yehuda <muli@il.ibm.com> for catching a bug
in the previous patch.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a very tiny probability that build_ehash_secret() is called
at the same time by different CPUS.

Also, using __read_mostly is a must for inet_ehash_secret
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Right now Xen has a horrible hack that lets it forward packets with
partial checksums.  One of the reasons that CHECKSUM_PARTIAL and
CHECKSUM_COMPLETE were added is so that we can get rid of this hack
(where it creates two extra bits in the skbuff to essentially mirror
ip_summed without being destroyed by the forwarding code).

I had forgotten that I've already gone through all the deivce drivers
last time around to make sure that they're looking at ip_summed ==
CHECKSUM_PARTIAL rather than ip_summed != 0 on transmit.  In any case,
I've now done that again so it should definitely be safe.

Unfortunately nobody has yet added any code to update CHECKSUM_COMPLETE
values on forward so we I'm setting that to CHECKSUM_NONE.  This should
be safe to remove for bridging but I'd like to check that code path
first.

So here is the patch that lets us get rid of the hack by preserving
ip_summed (mostly) on forwarded packets.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this is a small patch by Janusz Krzysztofik to ip_route_output_slow()
that allows VIP-less LVS linux director to generate packets
originating >From VIP if sysctl_ip_nonlocal_bind is set.

In a nutshell, the intention is for an LVS linux director to be able
to send ICMP unreachable responses to end-users when real-servers are
removed.

http://archive.linuxvirtualserver.org/html/lvs-users/2007-01/msg00106.htmlSigned-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of nop rules simplifies the usage of goto rules
and adds more flexibility as they allow targets to remain
while the actual content of the branches can change easly.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rules which match against device names in their selector can
remain while the device itself disappears, in fact the device
doesn't have to present when the rule is added in the first
place. The device name is resolved by trying when the rule is
added and later by listening to NETDEV_REGISTER/UNREGISTER
notifications.

This patch adds the flag FIB_RULE_DEV_DETACHED which is set
towards userspace when a rule contains a device match which
is unresolved at the moment. This eases spotting the reason
why certain rules seem not to function properly.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new rule action FR_ACT_GOTO which allows
to skip a set of rules by jumping to another rule. The rule
to jump to is specified via the FRA_GOTO attribute which
carries a rule preference.

Referring to a rule which doesn't exists is explicitely allowed.
Such goto rules are marked with the flag FIB_RULE_UNRESOLVED
and will act like a rule with a non-matching selector. The rule
will become functional as soon as its target is present.

The goto action enables performance optimizations by reducing
the average number of rules that have to be passed per lookup.

Example:
0:      from all lookup local
40:     not from all to 192.168.23.128 goto 32766
41:     from all fwmark 0xa blackhole
42:     from all fwmark 0xff blackhole
32766:  from all lookup main
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Caused by skb_reset_mac_header() changes, missing semicolon.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change tcp_probe to use ktime (needed to add one export).
Add option to only get events when cwnd changes - from Doug Leith
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following update received from Injong updates TCP cubic to the latest
version. I am running more complete tests and will have results after 4/1.

According to Injong: the new version improves on its scalability,
fairness and stability.  So in all properties, we confirmed it shows better
performance.

NCSU results (for 2.6.18 and 2.6.20) available:
	http://netsrv.csc.ncsu.edu/wiki/index.php/TCP_Testing

This version is described in a new Internet draft for CUBIC.
	http://www.ietf.org/internet-drafts/draft-rhee-tcp-cubic-00.txtSigned-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>