This patch makes pci_get_interrupt_pin() return values encoded
the same way as the "Interrupt Pin" value in PCI config space,
i.e., 1=INTA, ..., 4=INTD.

pirq_bios_set() is the only in-tree caller of pci_get_interrupt_pin()
and pci_get_interrupt_pin() is not exported.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Impact: cleanup

Now that arch/x86/pci/pci.h is used in a number of other places as well,
move the lowlevel x86 pci definitions into the architecture include files.
(not to be confused with the existing arch/x86/include/asm/pci.h file,
which provides public details about x86 PCI)

Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch updates the Intel Ibex Peak (PCH) LPC and SMBus Controller
DeviceIDs.

The LPC Controller ID is set by Firmware within the range of
0x3b00-3b1f.  This range is included in pci_ids.h using min and max
values, and irq.c now has code to handle the range (in lieu of 32
additions to a SWITCH statement).

The SMBus Controller ID is a fixed-value and will not change.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format
used by lspci(8).
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert printks to use dev_printk().

I converted DBG() to dev_dbg().  This DBG() is from arch/x86/pci/pci.h and
requires source-code modification to enable, so dev_dbg() seems roughly
equivalent.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

So far subsys_initcalls has been executed in this order depending on
the object order in the Makefile:

arch/x86/pci/visws.c:subsys_initcall(pcibios_init);
arch/x86/pci/numa.c:subsys_initcall(pci_numa_init);
arch/x86/pci/acpi.c:subsys_initcall(pci_acpi_init);
arch/x86/pci/legacy.c:subsys_initcall(pci_legacy_init);
arch/x86/pci/irq.c:subsys_initcall(pcibios_irq_init);
arch/x86/pci/common.c:subsys_initcall(pcibios_init);

This patch removes the ordering dependency. There is now only one
subsys_initcall function that contains subsystem initialization code
with a defined order.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Wrapped long lines, removed trailing whitespaces, fixed case indentation
inside switch and so.
Signed-off-by: NMiklos Vajna <vmiklos@frugalware.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Before:
total: 60 errors, 85 warnings, 1237 lines checked

After:
total: 1 errors, 82 warnings, 1226 lines checked

WARNING: line over 80 characters

Compile tested.

paolo@paolo-desktop:/tmp$ size irq.o.*
   text    data     bss     dec     hex filename
   6128     440      76    6644    19f4 irq.o.after
   6128     440      76    6644    19f4 irq.o.before
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586,
which it is not.

Without this patch, I get the following warning while booting,
among others,

| PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
| ------------[ cut here ]------------
| WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60()
| Modules linked in:
| Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99c #1
|  [<c0119fd4>] warn_on_slowpath+0x54/0x70
|  [<c02246e0>] ? vt_console_print+0x210/0x2b0
|  [<c02244d0>] ? vt_console_print+0x0/0x2b0
|  [<c011a413>] ? __call_console_drivers+0x43/0x60
|  [<c011a482>] ? _call_console_drivers+0x52/0x80
|  [<c011aa89>] ? release_console_sem+0x1c9/0x200
|  [<c0291d21>] ? raw_pci_read+0x41/0x70
|  [<c0291e8f>] ? pci_read+0x2f/0x40
|  [<c029151a>] pirq_via586_get+0x4a/0x60
|  [<c02914d0>] ? pirq_via586_get+0x0/0x60
|  [<c029178d>] pcibios_lookup_irq+0x15d/0x430
|  [<c03b895a>] pcibios_irq_init+0x17a/0x3e0
|  [<c03a66f0>] ? kernel_init+0x0/0x250
|  [<c03a6763>] kernel_init+0x73/0x250
|  [<c03b87e0>] ? pcibios_irq_init+0x0/0x3e0
|  [<c0114d00>] ? schedule_tail+0x10/0x40
|  [<c0102dee>] ? ret_from_fork+0x6/0x1c
|  [<c03a66f0>] ? kernel_init+0x0/0x250
|  [<c03a66f0>] ? kernel_init+0x0/0x250
|  [<c010324b>] kernel_thread_helper+0x7/0x1c
|  =======================
| ---[ end trace 4eaa2a86a8e2da22 ]---

and IRQ trouble later,

| irq 10: nobody cared (try booting with the "irqpoll" option)

Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called
at all; adding this workaround to via_router_probe() fixes the
problem for me.

Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll
never understand why.
Signed-off-by: NBertram Felgenhauer <int-e@gmx.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586,
which it is not.

Without this patch, I get the following warning while booting,
among others,

| PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
| ------------[ cut here ]------------
| WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60()
| Modules linked in:
| Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99c #1
|  [<c0119fd4>] warn_on_slowpath+0x54/0x70
|  [<c02246e0>] ? vt_console_print+0x210/0x2b0
|  [<c02244d0>] ? vt_console_print+0x0/0x2b0
|  [<c011a413>] ? __call_console_drivers+0x43/0x60
|  [<c011a482>] ? _call_console_drivers+0x52/0x80
|  [<c011aa89>] ? release_console_sem+0x1c9/0x200
|  [<c0291d21>] ? raw_pci_read+0x41/0x70
|  [<c0291e8f>] ? pci_read+0x2f/0x40
|  [<c029151a>] pirq_via586_get+0x4a/0x60
|  [<c02914d0>] ? pirq_via586_get+0x0/0x60
|  [<c029178d>] pcibios_lookup_irq+0x15d/0x430
|  [<c03b895a>] pcibios_irq_init+0x17a/0x3e0
|  [<c03a66f0>] ? kernel_init+0x0/0x250
|  [<c03a6763>] kernel_init+0x73/0x250
|  [<c03b87e0>] ? pcibios_irq_init+0x0/0x3e0
|  [<c0114d00>] ? schedule_tail+0x10/0x40
|  [<c0102dee>] ? ret_from_fork+0x6/0x1c
|  [<c03a66f0>] ? kernel_init+0x0/0x250
|  [<c03a66f0>] ? kernel_init+0x0/0x250
|  [<c010324b>] kernel_thread_helper+0x7/0x1c
|  =======================
| ---[ end trace 4eaa2a86a8e2da22 ]---

and IRQ trouble later,

| irq 10: nobody cared (try booting with the "irqpoll" option)

Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called
at all; adding this workaround to via_router_probe() fixes the
problem for me.

Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll
never understand why.
Signed-off-by: NBertram Felgenhauer <int-e@gmx.de>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, on an amd k8 system with multi ht chains, the numa_node of
pci devices under /sys/devices/pci0000:80/* is always 0, even if that
chain is on node 1 or 2 or 3.

Workaround: pcibus_to_node(bus) is used when we want to get the node that
pci_device is on.

In struct device, we already have numa_node member, and we could use
dev_to_node()/set_dev_node() to get and set numa_node in the device.
set_dev_node is called in pci_device_add() with pcibus_to_node(bus),
and pcibus_to_node uses bus->sysdata for nodeid.

The problem is when pci_add_device is called, bus->sysdata is not assigned
correct nodeid yet. The result is that numa_node will always be 0.

pcibios_scan_root and pci_scan_root could take sysdata. So we need to get
mp_bus_to_node mapping before these two are called, and thus
get_mp_bus_to_node could get correct node for sysdata in root bus.

In scanning of the root bus, all child busses will take parent bus sysdata.
So all pci_device->dev.numa_node will be assigned correctly and automatically.

Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we
could also could make other bus specific device get the correct numa_node
too.

This is an updated version of pci_sysdata and Jeff's pci_domain patch.

[ mingo@elte.hu: build fix ]
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

fix bogus pirq warnings reported in:

  http://bugzilla.kernel.org/show_bug.cgi?id=10366

safe to be backported to v2.6.25 and earlier.

Cc: stable@kernel.org
Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the Intel ICH10 LPC Controller DeviceID's.
Signed-off-by: NJason Gaston <jason.d.gaston@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I can find no reason for the _p on the serverworks IRQ routing logic, and
a review of the documentation contains no indication that any such delay
is needed so lets try this
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

we use a few static mapping rules in our pirq routing functions,
and for example regression f3ac8432 was due to the pirq
being out of range of the remapping array. Put in a few
WARN_ON_ONCE() lines so that we get notified about any such
out-of-bound incidents.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Spelling fixes in arch/i386/.
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

Add support for PicoPower PT86C523 IRQ router to be used with the in-kernel
yenta driver for CardBus.  With this patch cardbus works on e.g.  Dell
Latitude XPi P150CD.

Initial patch for kernel 2.4 series by Sune Mølgaard
http://molgaard.org/code/linux-2.4.31-picopower.patch

Ported to 2.6.20 by Chmouel Boudjnah (http://www.chmouel.com)

Testing and confirmation that it works by Austin Acton

Cleaned up a little for inclusion in a 2.6.21-rc7 based kernel.

Added some more cleanups according to CodingStyle, as noted by
Randy Dunlap on LKML.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: NThomas Backlund <tmb@mandriva.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Three main sets of changes:

1) dmi_get_system_info() return value should have been marked const,
   since callers should not be changing that data.

2) const-ify DMI internals, since DMI firmware tables should,
   whenever possible, be marked const to ensure we never ever write to
   that data area.

3) const-ify DMI API, to enable marking tables const where possible
   in low-level drivers.

And if we're really lucky, this might enable some additional
optimizations on the part of the compiler.

The bulk of the changes are #2 and #3, which are interrelated.  #1 could
have been a separate patch, but it was so small compared to the others,
it was easier to roll it into this changeset.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch adds the Intel Tolapai LPC and SMBus Controller DID's.
Signed-off-by: NJason Gaston <jason.d.gaston@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully
also fixes Riku's and Andy's observed bugs.  It is based on Yinghai Lu's
and Andy Whitcroft's patches (thanks!) with some changes:

- introduce pci_scan_bus_with_sysdata() and use it instead of
  pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will
  allocate the sysdata structure and then call pci_scan_bus().
- always allocate pci_sysdata dynamically. The whole point of this
  sysdata work is to make it easy to do root-bus specific things
  (e.g., support PCI domains and IOMMU's). I dislike using a default
  struct pci_sysdata in some places and a dynamically allocated
  pci_sysdata elsewhere - the potential for someone indavertantly
  changing the default structure is too high.
- this patch only makes the minimal changes necessary, i.e., the NUMA node is
  always initialized to -1. Patches to do the right thing with regards
  to the NUMA node can build on top of this (either add a 'node'
  parameter to pci_scan_bus_with_sysdata() or just update the node
  when it becomes known).

The patch was compile tested with various configurations (e.g., NUMAQ,
VISWS) and run-time tested on i386 and x86-64.  Unfortunately none of my
machines exhibited the bugs so caveat emptor.

Andy, could you please see if this fixes the NUMA issues you've seen?
Riku, does this fix "pci=noacpi" on your laptop?
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: <riku.seppala@kymp.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Resending as I believe the discussion about them established they were
correct.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's.
Signed-off-by: NJason Gaston <jason.d.gaston@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix interrupt routing for via 586 bridges.  pirq can be 5 which needs to be
mapped to INTD.  But currently the access functions can handle only pirq
1-4.  this is similar to the other via chipsets where pirq 4 and 5 are both
mapped to INTD.  Fixes bugzilla #7490

Cc: Daniel Paschka <monkey20181@gmx.net>
Cc: Adrian Bunk <bunk@susta.de>
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In commit ace80ab7 I removed the weird
logic that used the vector number as the irq number when MSI was
defined.  However pci_enable_irq was using a different test in the
io_apic_assign_irqs path and I missed it :(

This patch removes the wrong code so no one hits this problem.

This code is only active when a specific set of boot command line
parameters is specified which likely explains why no one has notices
this earlier.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes the change in behavior of the irq allocation code when
CONFIG_PCI_MSI is defined.  Removing all instances of the assumption that irq
== vector.

create_irq is rewritten to first allocate a free irq and then to assign that
irq a vector.

assign_irq_vector is made static and the AUTO_ASSIGN case which allocates an
vector not bound to an irq is removed.

The ioapic vector methods are removed, and everything now works with irqs.

The definition of NR_IRQS no longer depends on CONFIG_PCI_MSI

[akpm@osdl.org: cleanup]
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently we attempt to predict how many irqs we will be able to allocate with
msi using pci_vector_resources and some complicated accounting, and then we
only allow each device as many irqs as we think are available on average.

Only the s2io driver even takes advantage of this feature all other drivers
have a fixed number of irqs they need and bail if they can't get them.

pci_vector_resources is inaccurate if anyone ever frees an irq.  The whole
implmentation is racy.  The current irq limit policy does not appear to make
sense with current drivers.  So I have simplified things.  We can revisit this
we we need a more sophisticated policy.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rajesh Shah <rajesh.shah@intel.com>
Cc: Andi Kleen <ak@muc.de>
Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

constify structs and add one __initdata.
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This device id improperly got added to the VIA chipset list with a
previous patch.  Remove it as it is not correct.

Cc: Grzegorz Janoszka <Grzegorz@Janoszka.pl>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I use 2.6.15.6 Linux kernel and found some problems. I have about 100
Linux boxes (all with the same (binary the same) kernel). Last time I have
upgraded all those boxes from 2.4.32 to 2.6.15.6 (first 2.6.15.1, next .2,
.4 and .6) and I have found some problems on VIA based PC's. Probably the
reason of this is that some VIA chipsets are unrecognized by IRQ router.

In line 586 there is: /* FIXME: add new ones for 8233/5 */

There were only a few of chipsets ID's there, some of my VIA chipsets were
not present and kernel used default IRQ router.

I have added three entries, so that the code looks like:

        case PCI_DEVICE_ID_VIA_82C596:
        case PCI_DEVICE_ID_VIA_82C686:
        case PCI_DEVICE_ID_VIA_8231:
        case PCI_DEVICE_ID_VIA_8233A:
        case PCI_DEVICE_ID_VIA_8235:
        case PCI_DEVICE_ID_VIA_8237:
        case PCI_DEVICE_ID_VIA_8237_SATA:
                /* FIXME: add new ones for 8233/5 */
                r->name = "VIA";
                r->get = pirq_via_get;
                r->set = pirq_via_set;
                return 1;
        }

The kernel goes fine but I haven't testes it for weeks, I'm just a moment
after reboot :)
One thing is different (better?):
Using previus kernel I had:
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0
now I have:
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 11

Maybe it is good idea to add there some more VIA chipsets?
The ones I have added seem to be OK.

From: Grzegorz Janoszka <Grzegorz@Janoszka.pl>
Acked-by: NMartin Mares <mj@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files.
Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Updated printk and DBG with appropriate KERN_*.
Signed-off-by: NDaniel Marjamki <daniel.marjamaki@comhem.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This was harmless, but for the case of a device that had no irq
pre-defined we would incorrectly suggest that "usepirqmask" might make a
difference.  It never would, and the message was just confusing people.

Reported in the dmesg of Etienne Lorrain.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Hopefully fix http://bugzilla.kernel.org/show_bug.cgi?id=5235

Similar problem has been reported before here:
http://groups.google.com/group/linux.kernel/browse_thread/thread/def4ca19dbc3cd4/5cffbf349f2c87a4?tvc=2&q=Aleksey+Gorelov&hl=en#5cffbf349f2c87a4
and was related to bug in BIOS reporting 82C686 router compatible to 586.

I suspect BIOS on this board has similar issue: reports VT8235 router to be
compatible with 586 one - which is obviously not true.  Patch from the link
above has already incorporated in both 2.6 & 2.4 series, but might not work
in this particular case.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I need the following patch to compile -git8 here, otherwise these
files fail to compile (asm/hw_irq.h needs definitions from
linux/irq.h and that file provides the required include ordering).

I did not do a full audit, though there looks to be many other
places that should get the same treatment, if this is  the right
way to do it.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>