The cursor code for a page array selects the right page, page
offset, and length to use for a ceph_tcp_recvpage() call, so
we can use it to replace a block in read_partial_message_pages().

This partially resolves:
    http://tracker.ceph.com/issues/4428Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The bio_iter and bio_seg fields in a message are no longer used, we
use the cursor instead.  So get rid of them and the functions that
operate on them them.

This is related to:
    http://tracker.ceph.com/issues/4428Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Replace the use of the information in con->in_msg_pos for incoming
bio data.  The old in_msg_pos and the new cursor mechanism do
basically the same thing, just slightly differently.

The main functional difference is that in_msg_pos keeps track of the
length of the complete bio list, and assumed it was fully consumed
when that many bytes had been transferred.  The cursor does not assume
a length, it simply consumes all bytes in the bio list.  Because the
only user of bio data is the rbd client, and because the length of a
bio list provided by rbd client always matches the number of bytes
in the list, both ways of tracking length are equivalent.

In addition, for in_msg_pos the initial bio vector is selected as
the initial value of the bio->bi_idx, while the cursor assumes this
is zero.  Again, the rbd client always passes 0 as the initial index
so the effect is the same.

Other than that, they basically match:
    in_msg_pos      cursor
    ----------      ------
    bio_iter        bio
    bio_seg         vec_index
    page_pos        page_offset

The in_msg_pos field is initialized by a call to init_bio_iter().
The bio cursor is initialized by ceph_msg_data_cursor_init().
Both now happen in the same spot, in prepare_message_data().

The in_msg_pos field is advanced by a call to in_msg_pos_next(),
which updates page_pos and calls iter_bio_next() to move to the next
bio vector, or to the next bio in the list.  The cursor is advanced
by ceph_msg_data_advance().  That isn't currently happening so
add a call to that in in_msg_pos_next().

Finally, the next piece of data to use for a read is determined
by a bunch of lines in read_partial_message_bio().  Those can be
replaced by an equivalent ceph_msg_data_bio_next() call.

This partially resolves:
    http://tracker.ceph.com/issues/4428Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

All of the data types can use this, not just the page array.  Until
now, only the bio type doesn't have it available, and only the
initiator of the request (the rbd client) is able to supply the
length of the full request without re-scanning the bio list.  Change
the cursor init routines so the length is supplied based on the
message header "data_len" field, and use that length to intiialize
the "resid" field of the cursor.

In addition, change the way "last_piece" is defined so it is based
on the residual number of bytes in the original request.  This is
necessary (at least for bio messages) because it is possible for
a read request to succeed without consuming all of the space
available in the data buffer.

This resolves:
    http://tracker.ceph.com/issues/4427Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The value passed for "pages" in read_partial_message_pages() is
always the pages pointer from the incoming message, which can be
derived inside that function.  So just get rid of the parameter.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When the last reference to a ceph message is dropped,
ceph_msg_last_put() is called to clean things up.

For "normal" messages (allocated via ceph_msg_new() rather than
being allocated from a memory pool) it's sufficient to just release
resources.  But for a mempool-allocated message we actually have to
re-initialize the data fields in the message back to initial state
so they're ready to go in the event the message gets reused.

Some of this was already done; this fleshes it out so it's done
more completely.

This resolves:
    http://tracker.ceph.com/issues/4540Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd expects the transaction ids of arriving request messages from
a given client to a given osd to increase monotonically.  So the osd
client needs to send its requests in ascending tid order.

The transaction id for a request is set at the time it is
registered, in __register_request().  This is also where the request
gets placed at the end of the osd client's unsent messages list.

At the end of ceph_osdc_start_request(), the request message for a
newly-mapped osd request is supplied to the messenger to be sent
(via __send_request()).  If any other messages were present in the
osd client's unsent list at that point they would be sent *after*
this new request message.

Because those unsent messages have already been registered, their
tids would be lower than the newly-mapped request message, and
sending that message first can violate the tid ordering rule.

Rather than sending the new request only, send all queued requests
(including the new one) at that point in ceph_osdc_start_request().
This ensures the tid ordering property is preserved.

With this in place, all messages should now be sent in tid order
regardless of whether they're being sent for the first time or
re-sent as a result of a call to osd_reset().

This resolves:
    http://tracker.ceph.com/issues/4392Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-off-by: NSage Weil <sage@inktank.com>

In __map_request(), when adding a request to an osd client's unsent
list, add it to the tail rather than the head.  That way the newest
entries (with the highest tid value) will be last.

Maintain an osd's request list in order of increasing tid also.

Finally--to be consistent--maintain an osd client's "notarget" list
in that order as well.

This partially resolves:
    http://tracker.ceph.com/issues/4392Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-off-by: NSage Weil <sage@inktank.com>

The osd expects incoming requests for a given object from a given
client to arrive in order, with the tid for each request being
greater than the tid for requests that have already arrived.  This
patch fixes two places the osd client might not maintain that
ordering.

For the osd client, the connection fault method is osd_reset().
That function calls __reset_osd() to close and re-open the
connection, then calls __kick_osd_requests() to cause all
outstanding requests for the affected osd to be re-sent after
the connection has been re-established.

When an osd is reset, any in-flight messages will need to be
re-sent.  An osd client maintains distinct lists for unsent and
in-flight messages.  Meanwhile, an osd maintains a single list of
all its requests (both sent and un-sent).  (Each message is linked
into two lists--one for the osd client and one list for the osd.)

To process an osd "kick" operation, the request list for the *osd*
is traversed, and each request is moved off whichever osd *client*
list it was on (unsent or sent) and placed onto the osd client's
unsent list.  (It remains where it is on the osd's request list.)

When that is done, osd_reset() calls __send_queued() to cause each
of the osd client's unsent messages to be sent.

OK, with that background...

As the osd request list is traversed each request is prepended to
the osd client's unsent list in the order they're seen.  The effect
of this is to reverse the order of these requests as they are put
(back) onto the unsent list.

Instead, build up a list of only the requests for an osd that have
already been sent (by checking their r_sent flag values).  Once an
unsent request is found, stop examining requests and prepend the
requests that need re-sending to the osd client's unsent list.

Preserve the original order of requests in the process (previously
re-queued requests were reversed in this process).  Because they
have already been sent, they will have lower tids than any request
already present on the unsent list.

Just below that, traverse the linger list in forward order as
before, but add them to the *tail* of the list rather than the head.
These requests get re-registered, and in the process are give a new
(higher) tid, so the should go at the end.

This partially resolves:
    http://tracker.ceph.com/issues/4392Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-off-by: NSage Weil <sage@inktank.com>

Since we no longer drop the request mutex between registering and
mapping an osd request in ceph_osdc_start_request(), there is no
chance of a race with kick_requests().

We can now therefore map and send the new request unconditionally
(but we'll issue a warning should it ever occur).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-off-by: NSage Weil <sage@inktank.com>

One of the first things ceph_osdc_start_request() does is register
the request.  It then acquires the osd client's map semaphore and
request mutex and proceeds to map and send the request.

There is no reason the request has to be registered before acquiring
the map semaphore.  So hold off doing so until after the map
semaphore is held.

Since register_request() is nothing more than a wrapper around
__register_request(), call the latter function instead, after
acquiring the request mutex.

That leaves register_request() unused, so get rid of it.

This partially resolves:
    http://tracker.ceph.com/issues/4392Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-off-by: NSage Weil <sage@inktank.com>

The auth code is called from a variety of contexts, include the mon_client
(protected by the monc's mutex) and the messenger callbacks (currently
protected by nothing).  Avoid chaos by protecting all auth state with a
mutex.  Nothing is blocking, so this should be simple and lightweight.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Use wrapper functions that check whether the auth op exists so that callers
do not need a bunch of conditional checks.  Simplifies the external
interface.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Currently the messenger calls out to a get_authorizer con op, which will
create a new authorizer if it doesn't yet have one.  In the meantime, when
we rotate our service keys, the authorizer doesn't get updated.  Eventually
it will be rejected by the server on a new connection attempt and get
invalidated, and we will then rebuild a new authorizer, but this is not
ideal.

Instead, if we do have an authorizer, call a new update_authorizer op that
will verify that the current authorizer is using the latest secret.  If it
is not, we will build a new one that does.  This avoids the transient
failure.

This fixes one of the sorry sequence of events for bug

	http://tracker.ceph.com/issues/4282Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We were invalidating the authorizer by removing the ticket handler
entirely.  This was effective in inducing us to request a new authorizer,
but in the meantime it mean that any authorizer we generated would get a
new and initialized handler with secret_id=0, which would always be
rejected by the server side with a confusing error message:

 auth: could not find secret_id=0
 cephx: verify_authorizer could not get service secret for service osd secret_id=0

Instead, simply clear the validity field.  This will still induce the auth
code to request a new secret, but will let us continue to use the old
ticket in the meantime.  The messenger code will probably continue to fail,
but the exponential backoff will kick in, and eventually the we will get a
new (hopefully more valid) ticket from the mon and be able to continue.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We maintain a counter of failed auth attempts to allow us to retry once
before failing.  However, if the second attempt succeeds, the flag isn't
cleared, which makes us think auth failed again later when the connection
resets for other reasons (like a socket error).

This is one part of the sorry sequence of events in bug

	http://tracker.ceph.com/issues/4282Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

This is an old protocol extension that allows the client and server to
avoid resending old messages after a reconnect (following a socket error).
Instead, the exchange their sequence numbers during the handshake.  This
avoids sending a bunch of useless data over the socket.

It has been supported in the server code since v0.22 (Sep 2010).
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We should advance the user data pointer by _len_ instead of _written_.
_len_ is the data length written in each iteration while _written_ is the
accumulated data length we have writtent out.
Signed-off-by: NHenry C Chang <henry.cy.chang@gmail.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>
Tested-by: NSage Weil <sage@inktank.com>

Current ceph code tracks directory's completeness in two places.
ceph_readdir() checks i_release_count to decide if it can set the
I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE
flag. This indirection introduces locking complexity.

This patch adds a new variable i_complete_count to ceph_inode_info.
Set i_release_count's value to it when marking a directory complete.
By comparing the two variables, we know if a directory is complete
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Basically all cases in write_partial_msg_pages() use the cursor, and
as a result we can simplify that function quite a bit.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The wart that is the ceph message trail can now be removed, because
its only user was the osd client, and the previous patch made that
no longer the case.

The result allows write_partial_msg_pages() to be simplified
considerably.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The osd trail is a pagelist, used only for a CALL osd operation
to hold the class and method names, along with any input data for
the call.

It is only currently used by the rbd client, and when it's used it
is the only bit of outbound data in the osd request.  Since we
already support (non-trail) pagelist data in a message, we can
just save this outbound CALL data in the "normal" pagelist rather
than the trail, and get rid of the trail entirely.

The existing pagelist support depends on the pagelist being
dynamically allocated, and ownership of it is passed to the
messenger once it's been attached to a message.  (That is to say,
the messenger releases and frees the pagelist when it's done with
it).  That means we need to dynamically allocate the pagelist also.

Note that we simply assert that the allocation of a pagelist
structure succeeds.  Appending to a pagelist might require a dynamic
allocation, so we're already assuming we won't run into trouble
doing so (we're just ignore any failures--and that should be fixed
at some point).

This resolves:
    http://tracker.ceph.com/issues/4407Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Add support for recording a ceph pagelist as data associated with an
osd request.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The length of outgoing data in an osd request is dependent on the
osd ops that are embedded in that request.  Each op is encoded into
a request message using osd_req_encode_op(), so that should be used
to determine the amount of outgoing data implied by the op as it
is encoded.

Have osd_req_encode_op() return the number of bytes of outgoing data
implied by the op being encoded, and accumulate and use that in
ceph_osdc_build_request().

As a result, ceph_osdc_build_request() no longer requires its "len"
parameter, so get rid of it.

Using the sum of the op lengths rather than the length provided is
a valid change because:
    - The only callers of osd ceph_osdc_build_request() are
      rbd and the osd client (in ceph_osdc_new_request() on
      behalf of the file system).
    - When rbd calls it, the length provided is only non-zero for
      write requests, and in that case the single op has the
      same length value as what was passed here.
    - When called from ceph_osdc_new_request(), (it's not all that
      easy to see, but) the length passed is also always the same
      as the extent length encoded in its (single) write op if
      present.

This resolves:
    http://tracker.ceph.com/issues/4406Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Implement and use cursor routines for page array message data items
for outbound message data.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Implement and use cursor routines for bio message data items for
outbound message data.

(See the previous commit for reasoning in support of the changes
in out_msg_pos_next().)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Switch to using the message cursor for the (non-trail) outgoing
pagelist data item in a message if present.

Notes on the logic changes in out_msg_pos_next():
    - only the mds client uses a ceph pagelist for message data;
    - if the mds client ever uses a pagelist, it never uses a page
      array (or anything else, for that matter) for data in the same
      message;
    - only the osd client uses the trail portion of a message data,
      and when it does, it never uses any other data fields for
      outgoing data in the same message; and finally
    - only the rbd client uses bio message data (never pagelist).

Therefore out_msg_pos_next() can assume:
    - if we're in the trail portion of a message, the message data
      pagelist, data, and bio can be ignored; and
    - if there is a page list, there will never be any a bio or page
      array data, and vice-versa.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This just inserts some infrastructure in preparation for handling
other types of ceph message data items.  No functional changes,
just trying to simplify review by separating out some noise.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This patch lays out the foundation for using generic routines to
manage processing items of message data.

For simplicity, we'll start with just the trail portion of a
message, because it stands alone and is only present for outgoing
data.

First some basic concepts.  We'll use the term "data item" to
represent one of the ceph_msg_data structures associated with a
message.  There are currently four of those, with single-letter
field names p, l, b, and t.  A data item is further broken into
"pieces" which always lie in a single page.  A data item will
include a "cursor" that will track state as the memory defined by
the item is consumed by sending data from or receiving data into it.

We define three routines to manipulate a data item's cursor: the
"init" routine; the "next" routine; and the "advance" routine.  The
"init" routine initializes the cursor so it points at the beginning
of the first piece in the item.  The "next" routine returns the
page, page offset, and length (limited by both the page and item
size) of the next unconsumed piece in the item.  It also indicates
to the caller whether the piece being returned is the last one in
the data item.

The "advance" routine consumes the requested number of bytes in the
item (advancing the cursor).  This is used to record the number of
bytes from the current piece that were actually sent or received by
the network code.  It returns an indication of whether the result
means the current piece has been fully consumed.  This is used by
the message send code to determine whether it should calculate the
CRC for the next piece processed.

The trail of a message is implemented as a ceph pagelist.  The
routines defined for it will be usable for non-trail pagelist data
as well.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Group the types of message data into an abstract structure with a
type indicator and a union containing fields appropriate to the
type of data it represents.  Use this to represent the pages,
pagelist, bio, and trail in a ceph message.

Verify message data is of type NONE in ceph_msg_data_set_*()
routines.  Since information about message data of type NONE really
should not be interpreted, get rid of the other assertions in those
functions.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

A ceph message has a data payload portion.  The memory for that data
(either the source of data to send or the location to place data
that is received) is specified in several ways.  The ceph_msg
structure includes fields for all of those ways, but this
mispresents the fact that not all of them are used at a time.

Specifically, the data in a message can be in:
    - an array of pages
    - a list of pages
    - a list of Linux bios
    - a second list of pages (the "trail")
(The two page lists are currently only ever used for outgoing data.)

Impose more structure on the ceph message, making the grouping of
some of these fields explicit.  Shorten the name of the
"page_alignment" field.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define and use macros ceph_msg_has_*() to determine whether to
operate on the pages, pagelist, bio, and trail fields of a message.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Factor out a common block of code that updates a CRC calculation
over a range of data in a page.

This and the preceding patches are related to:
    http://tracker.ceph.com/issues/4403Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a new function ceph_tcp_recvpage() that behaves in a way
comparable to ceph_tcp_sendpage().

Rearrange the code in both read_partial_message_pages() and
read_partial_message_bio() so they have matching structure,
(similar to what's in write_partial_msg_pages()), and use
this new function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pull the code that reads the data portion into a message into
a separate function read_partial_msg_data().

Rename write_partial_msg_pages() to be write_partial_message_data()
to match its read counterpart, and to reflect its more generic
purpose.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define local variables page_offset and length to represent the range
of bytes within a page that will be sent by ceph_tcp_sendpage() in
write_partial_msg_pages().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In prepare_write_message_data(), various fields are initialized in
preparation for writing message data out.  Meanwhile, in
read_partial_message(), there is essentially the same block of code,
operating on message variables associated with an incoming message.

Generalize prepare_write_message_data() so it works for both
incoming and outcoming messages, and use it in both spots.  The
did_page_crc is not used for input (so it's harmless to initialize
it).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There are several places where a message's out_msg_pos or in_msg_pos
field is used repeatedly within a function.  Use a local pointer
variable for this purpose to unclutter the code.

This and the upcoming cleanup patches are related to:
    http://tracker.ceph.com/issues/4403Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

At one time it was necessary to clear a message's bio_iter field to
avoid a bad pointer dereference in write_partial_msg_pages().

That no longer seems to be the case.  Here's why.

The message's bio fields represent (in this case) outgoing data.
Between where the bio_iter is made NULL in prepare_write_message()
and the call in that function to prepare_message_data(), the
bio fields are never used.

In prepare_message_data(), init-bio_iter() is called, and the result
of that overwrites the value in the message's bio_iter field.

Because it gets overwritten anyway, there is no need to set it to
NULL.  So don't do it.

This resolves:
    http://tracker.ceph.com/issues/4402Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The mds client no longer tries to assign zero-length message data,
and the osd client no longer sets its data info more than once.
This allows us to activate assertions in the messenger to verify
these things never happen.

This resolves both of these:
    http://tracker.ceph.com/issues/4263
    http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>