- 25 5月, 2010 1 次提交
-
-
由 Banajit Goswami 提交于
This patch adds HAVE_S3C2410_WATCHDOG to control inclusion of watchdog driver for Samsung SoCs. This option will help to include the driver only for the necessary machines and not for all for any given arch. Signed-off-by: NBanajit Goswami <banajit.g@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 12 5月, 2010 1 次提交
-
-
由 Srinidhi Kasagar 提交于
This fixes the build failures seen when building mpcore_wdt and it also removes the nonexistent ARM_MPCORE_PLATFORM dependency, instead make it dependent on HAVE_ARM_TWD. Also this fixes spinlock usage appropriately. Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 4月, 2010 2 次提交
-
-
由 Geert Uytterhoeven 提交于
Correct fix for the "ioremap() causes build failure on S390" should have been a dependancy on HAS_IOMEM. So we add this dependancy also (and leave the driver in the ARM section for now). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Santosh Shilimkar 提交于
This patch allows Watchdog timer to be selected for OMAP4 by fixing Kconfig entry Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 04 4月, 2010 1 次提交
-
-
由 Marc Zyngier 提交于
Use of ioremap() causes build failure on S390. Restrict the driver to ARM until another architecture comes along and enables the driver for its own use. Signed-off-by: NMarc Zyngier <maz@misterjones.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 06 3月, 2010 3 次提交
-
-
由 Martyn Welch 提交于
This patch corrects author and copyright notices following the split-up of the GE Fanuc joint venture. Signed-off-by: NMartyn Welch <martyn.welch@ge.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Marc Zyngier 提交于
This driver adds support for the max63{69,70,71,72,73,74} family of watchdog timer chips. It has been tested on an Arcom Zeus (max6369). Signed-off-by: NMarc Zyngier <maz@misterjones.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Mika Westerberg 提交于
Technologic Systems TS-72xx SBCs have external glue logic CPLD which includes watchdog timer. This driver implements kernel support for that. Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 16 2月, 2010 2 次提交
-
-
由 Tony Lindgren 提交于
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Convert ARCH_OMAP24XX to ARCH_OMAP2 Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 26 1月, 2010 1 次提交
-
-
由 Denis Turischev 提交于
The mdelay function was used between I/O access commands, that causes peak in CPU usage. Fix it by substitution mdelay to msleep. Expand usage on fitPC2 compatible boards according to DMI identification. Signed-off-by: NDenis Turischev <denis@compulab.co.il> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 19 12月, 2009 1 次提交
-
-
由 Andres Salomon 提交于
Update to the new cs5535_mfgpt* API. The geode-specific wording should eventually be dropped from this driver... Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 12月, 2009 1 次提交
-
-
由 Ralf Baechle 提交于
The platform has never been fully merged Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com> Acked-by: NWim Van Sebroeck <wim@iguana.be>
-
- 09 12月, 2009 1 次提交
-
-
由 Albrecht Dreß 提交于
Remove the old WDT implementation. Signed-off-by: NAlbrecht Dreß <albrecht.dress@arcor.de> Acked-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 25 9月, 2009 1 次提交
-
-
由 Thierry Reding 提交于
This patch adds support for the watchdog timer on Avionic Design Xanthos boards. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 18 9月, 2009 3 次提交
-
-
由 Mark Brown 提交于
The WM831x series of devices provide a watchdog with configurable behaviour on timer expiry. Currently this driver support refreshes via a register or GPIO line and autonomous refreshes from a hardware source (eg, a clock). Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Wan ZongShun 提交于
Add watchdog device driver for the Nuvoton NUC900 series SoCs. Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Denis Turischev 提交于
Add support for watchdog found on SBC-FITPC2 board. Signed-off-by: NDenis Turischev <denis@compulab.co.il> Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 23 6月, 2009 1 次提交
-
-
由 Wim Van Sebroeck 提交于
Change the wdt_pci.c watchdog driver so that the code is the same for both the PCI-WDT500 as the PCI-WDT501 card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501_PCI. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 21 6月, 2009 5 次提交
-
-
由 matthieu castet 提交于
This add watchdog driver for broadcom 47xx device. It uses the ssb subsytem to access embeded watchdog device. Because the watchdog timeout is very short (about 2s), a soft timer is used to increase the watchdog period. Note : A patch for exporting the ssb_watchdog_timer_set will be submitted on next linux-mips merge. Without this patch it can't be build as a module. Signed-off-by: NAleksandar Radovanovic <biblbroks@sezampro.rs> Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr> Tested-by: NFlorian Fainelli <florian@openwrt.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 dmitry pervushin 提交于
Add watchdog timer support for Freescale STMP3xxx boards Signed-off-by: NVitaly Wool <vital@embeddedalley.com> Signed-off-by: NDmitry Pervushin <dpervushin@embeddedalley.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Timo Kokkonen 提交于
Implementation of twl4030 watchdog driver. Signed-off-by: NTimo Kokkonen <timo.t.kokkonen@nokia.com> Signed-off-by: NAtal Shargorodsky <ext-atal.shargorodsky@nokia.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Linus Walleij 提交于
This patch adds support for the U300 COH 901 327 watchdog for the U300 platform recently added to RMK:s ARM tree. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Daniel Laird 提交于
Add support for PNX833x watchdog timer. Signed-off-by: NDaniel Laird <daniel.j.laird@nxp.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 13 6月, 2009 1 次提交
-
-
由 Pavel Machek 提交于
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 09 6月, 2009 2 次提交
-
-
由 Nicolas Pitre 提交于
The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Thomas Reitmayr 提交于
The Kirkwood architecture uses the same watchdog device as the Orion architecture. This patch adds orion5x_wdt as a platform device for Kirkwood. Signed-off-by: NThomas Reitmayr <treitmayr@devbase.at> Tested-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
- 08 4月, 2009 1 次提交
-
-
由 Paulius Zaleckas 提交于
Removes ARM26 sections from Kconfig and Makefile, because ARM26 is long gone. Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 25 3月, 2009 1 次提交
-
-
由 Alan Cox 提交于
Change the wdt.c watchdog driver so that the code is the same for both the WDT500 as the WDT501-P card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501. Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 19 3月, 2009 1 次提交
-
-
由 Martyn Welch 提交于
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's PPC9A, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 14 2月, 2009 1 次提交
-
-
由 Wim Van Sebroeck 提交于
bugzilla: #12363 commit 7cd5b08b added a second regression: some Dell's and Compaq's lockup on boot. So we revert most of the code. The ICH9 reboot issue remains in place and will need some more fixing... :-( Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 29 1月, 2009 1 次提交
-
-
由 Martyn Welch 提交于
Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the basic board support for GE Fanuc's SBC310, a 3U single board computer, based on Freescale's MPC8641D. Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 25 1月, 2009 1 次提交
-
-
由 Russell King 提交于
The driver was updated for OMAP34xx, but the Kconfig file was missed. So this adds the missing parts from d99241c in Tony Lindgren's tree: Add watchdog timer support for TI OMAP3430. Signed-off-by: NMadhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 1月, 2009 2 次提交
-
-
由 Sean MacLennan 提交于
The FPGA based watchdog timer used by the Pika Warp appliance. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Martyn Welch 提交于
GE Fanuc SBC610 Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310, SBC610 and PPC9A Single Board Computers. This patch adds support for the watchdog timer found in one of the devices FPGAs. There are two identical watchdog timers at different offsets in the above mentioned boards, this driver is capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 01 1月, 2009 2 次提交
-
-
由 Mark Brown 提交于
This driver implements support for the watchdog functionality provided by the Wolfson Microelectronics WM8350, a multi-function audio and power management subsystem intended for use in embedded systems. It is based on a driver originally written by Graeme Gregory, though it has been extensively modified since then. Use of a GPIO to kick the watchdog is not yet supported. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Wim Van Sebroeck 提交于
Add a watchdog driver for the hardware watchdog timer on the SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset. Tested-by: NMarco Chiappero <marco@absence.it> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 06 11月, 2008 1 次提交
-
-
由 Andrew Victor 提交于
The SAM9 watchdog driver is usable on the whole family of AT91SAM9 and CAP9 processors. Update the configuration to indicate this and allow the driver to be selected. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 10 10月, 2008 2 次提交
-
-
由 Sylver Bruneau 提交于
This patch allows the use of the hardware watchdog in the Marvell Orion series of ARM SoCs. Signed-off-by: NSylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Renaud CERRATO 提交于
Add a driver for the watchdog timer embedded into AT91SAM9X chips. Signed-off-by: NRenaud Cerrato <r.cerrato@til-technologies.fr> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-