This is necessary for a multi-SoC kernel.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This is important for kernels supporting more than one SoC.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

MXC_IRQ_PRIOR, MXC_PWM and ARCH_HAS_RNGA are all defined in an "if
ARCH_MXC" ... "endif" block, so they depend on ARCH_MXC anyhow.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

COMMON_CLKDEV is used on all imx platforms, so this isn't used.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This is broken since at least one year when

	ec996ba9 (mxc timer: make compile time independent)

removed the symbol MXC_TCN.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

ARCH_REQUIRE_GPIOLIB selects GPIOLIB which in turn selects GENERIC_GPIO
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

I assume this was introduced by something like

	sed -i -e 's/)/, NO_PAD_CTRL)'
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Now if the problem occurs that triggered the BUG_ON before, the machine
runs in a NULL pointer dereference.  So it wouldn't be much harder now
to debug the situation if it occured.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

As in most cases only few irqs are pending using fls is more effective
than looping over all bits.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

GPIO_INT_LOW_LEV is defined as

	(cpu_is_mx1_mx2() ? 0x3 : 0x0)

so depending on compiler optimisation and enabled SoCs this doesn't
qualify as a constant expression as needed by a switch statement.
Ditto for GPIO_INT_HIGH_LEV.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This removes some #ifdefs and prepares moving the files in a directory
with more than imx21 and imx27 support.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The previous commits cleaned up arch/arm/mach-mx2/devices.c such that it
doesn't rely on deprecated symbols any more.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

As the gpio ports have different addresses on imx21 and imx27 there are
two different port descriptions needed if not relying on the overloaded
cpp macro IO_ADDRESS.  So some cpp magic is added to minimize code
duplication.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The previous commit introduced one nand device per SoC.  Use this
directly instead of the compatibility macro that will break for
multi-SoC kernels.  And while at it remove the compatibility macro now
that all in-tree users are fixed.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

As the NFC controller has different addresses on imx21 and imx27 there
are two different devices needed if not relying on the overloaded cpp
macro NFC_BASE_ADDR.  So some cpp magic is added to minimize code
duplication.

As obviously these two defines need different names, the name of the old
device is #defined to the new one when building for only one of imx21 or
imx27.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

There is only NFC_BASE_ADDR left which is defined differently for mx21
and mx27.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the source shorter and easier to verify.  While at it switch
to use the SoC-prefixed constants.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This is a further step in allowing to build a kernel image for more
than one imx SOC.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This makes the file compilable for a kernel that supports both imx21 and
imx27.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

This simplifies the macro and makes is similar to the other
..._IO_ADDRESS macros defined for imx SOCs.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Apart from MXC91231_IO_ADDRESS itself this was the only usage of
MXC91231_AIPS1_IO_ADDRESS.  Now MXC91231_IO_ADDRESS can be recoded with
IMX_IO_ADDRESS and all helper macros can go away.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Daniel Schaeffer <daniel.schaeffer@timesys.com>
Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Cc: Ivo Clarysse <ivo.clarysse@gmail.com>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

The old names are defined only if the cpp symbol
IMX_NEEDS_DEPRECATED_SYMBOLS exists, which is defined (for now) for all
files below arch/arm/mach-mx1.

This was done earlier for mx2 and mx3, too.

USBD_INT0 is for now defined unconditionally to prevent breaking
drivers/usb/gadget/imx_udc.

While at it use IMX_IO_ADDRESS to define MX1_IO_ADDRESS which
adds a cast to the IO_ADDRESS macro fixing many warnings like

	arch/arm/mach-mx1/generic.c:51: warning: passing argument 1 of 'mxc_init_irq' makes pointer from integer without a cast

.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Reported-by: NTim Sander <tstone@vlsi.informatik.tu-darmstadt.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

This patch adds SDHC support, and corrects current pins setup.
Added irq handling on card removal.
Signed-off-by: NVladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>