If a user performs a direct CoW write, we end up loading the CoW fork
with preallocated extents.  Therefore, we must set the cowblocks tag so
that they can be cleared out if we run low on space.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

When we're remounting the filesystem readonly, remove all CoW
preallocations prior to going ro.  If the fs goes down after the ro
remount, we never clean up the staging extents, which means xfs_check
will trip over them on a subsequent run.  Practically speaking, the next
mount will clean them up too, so this is unlikely to be seen.  Since we
shut down the cowblocks cleaner on remount-ro, we also have to make sure
we start it back up if/when we remount-rw.

Found by adding clonerange to fsstress and running xfs/017.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Currently, xfs_itruncate_extents clears the cowblocks tag if i_cnextents
is zero.  This is wrong, since i_cnextents only tracks real extents in
the CoW fork, which means that we could have some delayed CoW
reservations still in there that will now never get cleaned.

Fix a further bug where we /don't/ clear the reflink iflag if there are
any attribute blocks -- really, it's only safe to clear the reflink flag
if there are no data fork extents and no cow fork extents.

Found by adding clonerange to fsstress in xfs/017.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The EOFBLOCKS/COWBLOCKS tags are totally separate things, so track them
with separate i_flags.  Right now we're abusing IEOFBLOCKS for both,
which is totally bogus because we won't tag the inode with COWBLOCKS if
IEOFBLOCKS was set by a previous tagging of the inode with EOFBLOCKS.
Found by wiring up clonerange to fsstress in xfs/017.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Since we as yet have no way of holding on to the indlen blocks that are
reserved as part of CoW fork delalloc reservations, let the CoW remap
transaction dip into the reserves so that we avoid failing writes.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

When we're cancelling a cow range, we don't always delete each extent
that we iterate, so we have to move icur backwards in the list to avoid
an infinite loop.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

We don't hold the ilock through the entire sequence of xfs_writepage_map
-> xfs_map_cow -> xfs_reflink_find_cow_mapping.  This means that we can
race with another thread that is trying to clear the inode reflink flag,
with the result that the flag is set for the xfs_map_cow check but
cleared before we get to the assert in find_cow_mapping.  When this
happens, we blow the assert even though everything is fine.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

If we try to reflink into a file with post-eof preallocations at an
offset well past the preallocations, we increase i_size as one would
expect.  However, those allocations do not have page cache backing them,
so they won't get cleaned out on their own.  This leads to asserts in
the collapse/insert range code and xfs_destroy_inode when they encounter
delalloc extents they weren't expecting to find.

Since there are plenty of other places where we dump those post-eof
blocks, do the same to the reflink destination file before we start
remapping extents.  This was found by adding clonerange support to
fsstress and running it in write-only mode.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Move the tracepoint in xfs_iext_insert to after the point where we've
inserted the extent because otherwise we report stale extent data in
the ftrace output.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

In e1a4e37c ("xfs: try to avoid blowing out the transaction
reservation when bunmaping a shared extent"), we try to constrain the
amount of real extents we unmap from the data fork in a given call so
that we don't blow out transaction reservations.

However, not all bunmapi operations require a transaction -- if we're
only removing a delalloc extent, no transaction is needed, so we have to
code against that.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The new attribute leaf buffer is not held locked across the transaction
roll between the shortform->leaf modification and the addition of the
new entry.  As a result, the attribute buffer modification being made is
not atomic from an operational perspective.  Hence the AIL push can grab
it in the transient state of "just created" after the initial
transaction is rolled, because the buffer has been released.  This leads
to xfs_attr3_leaf_verify() asserting that hdr.count is zero, treating
this as in-memory corruption, and shutting down the filesystem.

Darrick ported the original patch to 4.15 and reworked it use the
xfs_defer_bjoin helper and hold/join the buffer correctly across the
second transaction roll.
Signed-off-by: NAlex Lyakas <alex@zadarastorage.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

In certain cases, defer_ops callers will lock a buffer and want to hold
the lock across transaction rolls.  Similar to ijoined inodes, we want
to dirty & join the buffer with each transaction roll in defer_finish so
that afterwards the caller still owns the buffer lock and we haven't
inadvertently pinned the log.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Historically, the XFS iomap_begin function only returned mappings for
exactly the range queried, i.e. it doesn't do XFS_BMAPI_ENTIRE lookups.
The current vfs iomap consumers are only set up to deal with trimmed
mappings.  xfs_xattr_iomap_begin does BMAPI_ENTIRE lookups, which is
inconsistent with the current iomap usage.  Remove the flag so that both
iomap_begin functions behave the same way.

FWIW this also fixes a behavioral regression in xattr FIEMAP that was
introduced in 4.8 wherein attr fork extents are no longer trimmed like
they used to be.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

If we create a new file we will need an inode, and usually some metadata
in the parent direction.  Aiming for everything to go well despite the
lack of a reservation leads to dirty transactions cancelled under a heavy
create/delete load.  This patch removes those nospace transactions, which
will lead to slightly earlier ENOSPC on some workloads, but instead
prevent file system shutdowns due to cancelling dirty transactions for
others.

A customer could observe assertations failures and shutdowns due to
cancelation of dirty transactions during heavy NFS workloads as shown
below:

2017-05-30 21:17:06 kernel: WARNING: [ 2670.728125] XFS: Assertion failed: error != -ENOSPC, file: fs/xfs/xfs_inode.c, line: 1262

2017-05-30 21:17:06 kernel: WARNING: [ 2670.728222] Call Trace:
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728246]  [<ffffffff81795daf>] dump_stack+0x63/0x81
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728262]  [<ffffffff810a1a5a>] warn_slowpath_common+0x8a/0xc0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728264]  [<ffffffff810a1b8a>] warn_slowpath_null+0x1a/0x20
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728285]  [<ffffffffa01bf403>] asswarn+0x33/0x40 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728308]  [<ffffffffa01bb07e>] xfs_create+0x7be/0x7d0 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728329]  [<ffffffffa01b6ffb>] xfs_generic_create+0x1fb/0x2e0 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728348]  [<ffffffffa01b7114>] xfs_vn_mknod+0x14/0x20 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728366]  [<ffffffffa01b7153>] xfs_vn_create+0x13/0x20 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728380]  [<ffffffff81231de5>] vfs_create+0xd5/0x140
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728390]  [<ffffffffa045ddb9>] do_nfsd_create+0x499/0x610 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728396]  [<ffffffffa0465fa5>] nfsd3_proc_create+0x135/0x210 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728401]  [<ffffffffa04561e3>] nfsd_dispatch+0xc3/0x210 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728416]  [<ffffffffa03bfa43>] svc_process_common+0x453/0x6f0 [sunrpc]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728423]  [<ffffffffa03bfdf3>] svc_process+0x113/0x1f0 [sunrpc]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728427]  [<ffffffffa0455bcf>] nfsd+0x10f/0x180 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728432]  [<ffffffffa0455ac0>] ? nfsd_destroy+0x80/0x80 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728438]  [<ffffffff810c0d58>] kthread+0xd8/0xf0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728441]  [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728451]  [<ffffffff8179d962>] ret_from_fork+0x42/0x70
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728453]  [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728454] ---[ end trace f9822c842fec81d4 ]---

2017-05-30 21:17:06 kernel: ALERT: [ 2670.728477] XFS (sdb): Internal error xfs_trans_cancel at line 983 of file fs/xfs/xfs_trans.c.  Caller xfs_create+0x4ee/0x7d0 [xfs]

2017-05-30 21:17:06 kernel: ALERT: [ 2670.728684] XFS (sdb): Corruption of in-memory data detected. Shutting down filesystem
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728685] XFS (sdb): Please umount the filesystem and rectify the problem(s)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: NPravin Shedge <pravin.shedge4linux@gmail.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Once the inode item writeback errors is already fixed, it's time to fix the same
problem in dquot code.

Although there were no reports of users hitting this bug in dquot code (at least
none I've seen), the bug is there and I was already planning to fix it when the
correct approach to fix the inodes part was decided.

This patch aims to fix the same problem in dquot code, regarding failed buffers
being unable to be resubmitted once they are flush locked.

Tested with the recently test-case sent to fstests list by Hou Tao.
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Since we've used up all the bits in i_mode, the existing mode check
doesn't actually do anything useful.  However, we've not used all the
bit values in the format portion of i_mode, so we /do/ need to test
that for bad values.

Fixes: 80e4e126 ("xfs: scrub inodes")
Fixes-coverity-id: 1423992
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

The first thing that xfs_writepage_map does is clobber the offset
parameter.  Since we never use the passed-in value, turn the parameter
into a local variable.  This gets rid of an UBSAN warning in generic/466.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Fix some complaints from the UBSAN about signed integer addition overflows.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

It's only used for tracepoints so it's relatively harmless,
but the offset is calculated incorrectly in xfs_scrub_quota_item.

qi_dqperchunk is the nr. of dquots per "chunk" which we have
conveniently *cough* defined to always be 1 FSB.  Therefore
block_offset * qi_dqperchunk == first id in that chunk,
and so offset = id / qi_dqperchunk

id * dqperchunk is ... meaningless.

Fixes-coverity-id: 1423965
Fixes: c2fc338c ("xfs: scrub quota information")
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

On the first pass through the while(1) loop, we get to
xfs_scrub_should_terminate() which can test the uninitialized
error variable.

Fixes-coverity-id: 1423737
Fixes: c2fc338c ("xfs: scrub quota information")
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Use _GOTO instead of _RETURN so we can free the allocated
cursor on error.

Fixes: bf806280 ("xfs: remove xfs_bmse_shift_one")
Fixes-coverity-id: 1423813, 1423676
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

percpu_counter_init failure path doesn't clean up &btp->bt_lru list.
Call list_lru_destroy in that error path. Similarly register_shrinker
error path is not handled.

While it is unlikely to trigger these error path, it is not impossible
especially the later might fail with large NUMAs.  Let's handle the
failure to make the code more robust.
Noticed-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

As part of testing log recovery with dm_log_writes, Amir Goldstein
discovered an error in the deferred ops recovery that lead to corruption
of the filesystem metadata if a reflink+rmap filesystem happened to shut
down midway through a CoW remap:

"This is what happens [after failed log recovery]:

"Phase 1 - find and verify superblock...
"Phase 2 - using internal log
"        - zero log...
"        - scan filesystem freespace and inode maps...
"        - found root inode chunk
"Phase 3 - for each AG...
"        - scan (but don't clear) agi unlinked lists...
"        - process known inodes and perform inode discovery...
"        - agno = 0
"data fork in regular inode 134 claims CoW block 376
"correcting nextents for inode 134
"bad data fork in inode 134
"would have cleared inode 134"

Hou Tao dissected the log contents of exactly such a crash:

"According to the implementation of xfs_defer_finish(), these ops should
be completed in the following sequence:

"Have been done:
"(1) CUI: Oper (160)
"(2) BUI: Oper (161)
"(3) CUD: Oper (194), for CUI Oper (160)
"(4) RUI A: Oper (197), free rmap [0x155, 2, -9]

"Should be done:
"(5) BUD: for BUI Oper (161)
"(6) RUI B: add rmap [0x155, 2, 137]
"(7) RUD: for RUI A
"(8) RUD: for RUI B

"Actually be done by xlog_recover_process_intents()
"(5) BUD: for BUI Oper (161)
"(6) RUI B: add rmap [0x155, 2, 137]
"(7) RUD: for RUI B
"(8) RUD: for RUI A

"So the rmap entry [0x155, 2, -9] for COW should be freed firstly,
then a new rmap entry [0x155, 2, 137] will be added. However, as we can see
from the log record in post_mount.log (generated after umount) and the trace
print, the new rmap entry [0x155, 2, 137] are added firstly, then the rmap
entry [0x155, 2, -9] are freed."

When reconstructing the internal log state from the log items found on
disk, it's required that deferred ops replay in exactly the same order
that they would have had the filesystem not gone down.  However,
replaying unfinished deferred ops can create /more/ deferred ops.  These
new deferred ops are finished in the wrong order.  This causes fs
corruption and replay crashes, so let's create a single defer_ops to
handle the subsequent ops created during replay, then use one single
transaction at the end of log recovery to ensure that everything is
replayed in the same order as they're supposed to be.
Reported-by: NAmir Goldstein <amir73il@gmail.com>
Analyzed-by: NHou Tao <houtao1@huawei.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

In xfs_ifree, we reset the data/attr forks to extents format without
bothering to free any inline data buffer that might still be around
after all the blocks have been truncated off the file.  Prior to commit
43518812 ("xfs: remove support for inlining data/extents into the
inode fork") nobody noticed because the leftover inline data after
truncation was small enough to fit inside the inline buffer inside the
fork itself.

However, now that we've removed the inline buffer, we /always/ have to
free the inline data buffer or else we leak them like crazy.  This test
was found by turning on kmemleak for generic/001 or generic/388.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Pull ARM fixes from Russell King:

 - LPAE fixes for kernel-readonly regions

 - Fix for get_user_pages_fast on LPAE systems

 - avoid tying decompressor to a particular platform if DEBUG_LL is
   enabled

 - BUG if we attempt to return to userspace but the to-be-restored PSR
   value keeps us in privileged mode (defeating an issue that ftracetest
   found)

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: BUG if jumping to usermode address in kernel mode
  ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
  ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
  ARM: make decompressor debug output user selectable
  ARM: fix get_user_pages_fast

Pull irq fixes from Thomas Glexiner:

 - unbreak the irq trigger type check for legacy platforms

 - a handful fixes for ARM GIC v3/4 interrupt controllers

 - a few trivial fixes all over the place

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/matrix: Make - vs ?: Precedence explicit
  irqchip/imgpdc: Use resource_size function on resource object
  irqchip/qcom: Fix u32 comparison with value less than zero
  irqchip/exiu: Fix return value check in exiu_init()
  irqchip/gic-v3-its: Remove artificial dependency on PCI
  irqchip/gic-v4: Add forward definition of struct irq_domain_ops
  irqchip/gic-v3: pr_err() strings should end with newlines
  irqchip/s3c24xx: pr_err() strings should end with newlines
  irqchip/gic-v3: Fix ppi-partitions lookup
  irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails
  genirq: Track whether the trigger type has been set

Pull misc x86 fixes from Ingo Molnar:
 - topology enumeration fixes
 - KASAN fix
 - two entry fixes (not yet the big series related to KASLR)
 - remove obsolete code
 - instruction decoder fix
 - better /dev/mem sanity checks, hopefully working better this time
 - pkeys fixes
 - two ACPI fixes
 - 5-level paging related fixes
 - UMIP fixes that should make application visible faults more debuggable
 - boot fix for weird virtualization environment

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/decoder: Add new TEST instruction pattern
  x86/PCI: Remove unused HyperTransport interrupt support
  x86/umip: Fix insn_get_code_seg_params()'s return value
  x86/boot/KASLR: Remove unused variable
  x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
  x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
  x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
  x86/pkeys/selftests: Fix protection keys write() warning
  x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
  x86/mpx/selftests: Fix up weird arrays
  x86/pkeys: Update documentation about availability
  x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
  x86/smpboot: Fix __max_logical_packages estimate
  x86/topology: Avoid wasting 128k for package id array
  perf/x86/intel/uncore: Cache logical pkg id in uncore driver
  x86/acpi: Reduce code duplication in mp_override_legacy_irq()
  x86/acpi: Handle SCI interrupts above legacy space gracefully
  x86/boot: Fix boot failure when SMP MP-table is based at 0
  x86/mm: Limit mmap() of /dev/mem to valid physical addresses
  x86/selftests: Add test for mapping placement for 5-level paging
  ...

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: a documentation fix, a Sparse warning fix and a debugging
  fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix task state recording/printout
  sched/deadline: Don't use dubious signed bitfields
  sched/deadline: Fix the description of runtime accounting in the documentation

Pull perf fixes from Ingo Molnar:
 "Misc fixes: two PMU driver fixes and a memory leak fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix memory leak triggered by perf --namespace
  perf/x86/intel/uncore: Add event constraint for BDX PCU
  perf/x86/intel: Hide TSX events when RTM is not supported

Pull static key fix from Ingo Molnar:
 "Fix a boot warning related to bad init ordering of the static keys
  self-test"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jump_label: Invoke jump_label_test() via early_initcall()

Pull objtool fixes from Ingo Molnar:
 "A handful of objtool fixes, most of them related to making the UAPI
  header-syncing warnings easier to read and easier to act upon"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/headers: Sync objtool UAPI header
  objtool: Fix cross-build
  objtool: Move kernel headers/code sync check to a script
  objtool: Move synced files to their original relative locations
  objtool: Make unreachable annotation inline asms explicitly volatile
  objtool: Add a comment for the unreachable annotation macros

Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode.  This
could occur due to corrupted stack state, which has been observed with
"ftracetest".

This ensures that we catch the problem case before we get to user code.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

Pull timer updates from Thomas Gleixner:

 - The final conversion of timer wheel timers to timer_setup().

   A few manual conversions and a large coccinelle assisted sweep and
   the removal of the old initialization mechanisms and the related
   code.

 - Remove the now unused VSYSCALL update code

 - Fix permissions of /proc/timer_list. I still need to get rid of that
   file completely

 - Rename a misnomed clocksource function and remove a stale declaration

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  m68k/macboing: Fix missed timer callback assignment
  treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
  timer: Remove redundant __setup_timer*() macros
  timer: Pass function down to initialization routines
  timer: Remove unused data arguments from macros
  timer: Switch callback prototype to take struct timer_list * argument
  timer: Pass timer_list pointer to callbacks unconditionally
  Coccinelle: Remove setup_timer.cocci
  timer: Remove setup_*timer() interface
  timer: Remove init_timer() interface
  treewide: setup_timer() -> timer_setup() (2 field)
  treewide: setup_timer() -> timer_setup()
  treewide: init_timer() -> setup_timer()
  treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
  s390: cmm: Convert timers to use timer_setup()
  lightnvm: Convert timers to use timer_setup()
  drivers/net: cris: Convert timers to use timer_setup()
  drm/vc4: Convert timers to use timer_setup()
  block/laptop_mode: Convert timers to use timer_setup()
  net/atm/mpc: Avoid open-coded assignment of timer callback function
  ...

Pull ARC updates from Vineet Gupta:

 - more changes for HS48 cores: supporting MMUv5, detecting new
   micro-arch gizmos

 - axs10x platform wiring up reset driver merged in this cycle

 - ARC perf driver optimizations

* tag 'arc-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: perf: avoid vmalloc backed mmap
  ARCv2: perf: optimize given that num counters <= 32
  ARCv2: perf: tweak overflow interrupt
  ARC: [plat-axs10x] DTS: Add reset controller node to manage ethernet reset
  ARCv2: boot log: updates for HS48: dual-issue, ECC, Loop Buffer
  ARCv2: Accomodate HS48 MMUv5 by relaxing MMU ver checking
  ARC: [plat-axs10x] auto-select AXS101 or AXS103 given the  ISA config

Pull more Kbuild updates from Masahiro Yamada:

 - use 'pwd' instead of '/bin/pwd' for portability

 - clean up Makefiles

 - fix ld-option for clang

 - fix malloc'ed data size in Kconfig

 - fix parallel building along with coccicheck

 - fix a minor issue of package building

 - prompt to use "rpm-pkg" instead of "rpm"

 - clean up *.i and *.lst patterns by "make clean"

* tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: drop $(extra-y) from real-objs-y
  kbuild: clean up *.i and *.lst patterns by make clean
  kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used
  kbuild: pkg: use --transform option to prefix paths in tar
  coccinelle: fix parallel build with CHECK=scripts/coccicheck
  kconfig/symbol.c: use correct pointer type argument for sizeof
  kbuild: Set KBUILD_CFLAGS before incl. arch Makefile
  kbuild: remove all dummy assignments to obj-
  kbuild: create built-in.o automatically if parent directory wants it
  kbuild: /bin/pwd -> pwd

Pull AFS fixes from David Howells:

 - Make AFS file locking work again.

 - Don't write to a page that's being written out, but wait for it to
   complete.

 - Do d_drop() and d_add() in the right places.

 - Put keys on error paths.

 - Remove some redundant code.

* tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: remove redundant assignment of dvnode to itself
  afs: cell: Remove unnecessary code in afs_lookup_cell
  afs: Fix signal handling in some file ops
  afs: Fix some dentry handling in dir ops and missing key_puts
  afs: Make afs_write_begin() avoid writing to a page that's being stored
  afs: Fix file locking

Pull KVM updates from Radim Krčmář:
 "Trimmed second batch of KVM changes for Linux 4.15:

   - GICv4 Support for KVM/ARM

   - re-introduce support for CPUs without virtual NMI (cc stable) and
     allow testing of KVM without virtual NMI on available CPUs

   - fix long-standing performance issues with assigned devices on AMD
     (cc stable)"

* tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
  kvm: vmx: Allow disabling virtual NMI support
  kvm: vmx: Reinstate support for CPUs without virtual NMI
  KVM: SVM: obey guest PAT
  KVM: arm/arm64: Don't queue VLPIs on INV/INVALL
  KVM: arm/arm64: Fix GICv4 ITS initialization issues
  KVM: arm/arm64: GICv4: Theory of operations
  KVM: arm/arm64: GICv4: Enable VLPI support
  KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity
  KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved
  KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
  KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
  KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source
  KVM: arm/arm64: GICv4: Add doorbell interrupt handling
  KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
  KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
  KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
  KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
  KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
  KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS
  KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
  ...

Pull powerpc fixes from Michael Ellerman:
 "A small batch of fixes, about 50% tagged for stable and the rest for
  recently merged code.

  There's one more fix for the >128T handling on hash. Once a process
  had requested a single mmap above 128T we would then always search
  above 128T. The correct behaviour is to consider the hint address in
  isolation for each mmap request.

  Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in
  VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly
  identify P9 DD2.1 but in code that is currently not used by default.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan,
  Sukadev Bhattiprolu"

* tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features
  powerpc/perf: Fix IMC_MAX_PMU macro
  powerpc/perf: Fix pmu_count to count only nest imc pmus
  powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX
  powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()
  powerpc/vas: Export chip_to_vas_id()
  powerpc/64s/slice: Use addr limit when computing slice mask