- 14 4月, 2011 1 次提交
-
-
git://gitorious.org/usb/usb由 Greg Kroah-Hartman 提交于
* 'for-greg' of git://gitorious.org/usb/usb: USB: musb: blackfin: work around anomaly 05000450 usb: musb: Fix the crash issue during reboot usb: musb: gadget: check the correct list_head usb: musb: temporarily make it bool USB: musb: dereferencing an iomem pointer USB: musb: silence printk format warning USB: musb: using 0 instead of NULL USB: musb: add missing unlock in cppi_interrupt() usb: musb: ux500: copy dma mask from platform device to musb device usb: musb: clear AUTOSET while clearing DMAENAB
-
- 13 4月, 2011 10 次提交
-
-
由 Mike Frysinger 提交于
DMA mode 1 data corruption anomaly on Blackfin systems. This issue is specific to the Blackfin silicon as the bug appears to be related to the connection of the musb ip to the bus/dma fabric. Data corruption when using USB DMA mode 1. (Issue manager 17-01-0105) DMA mode 1 allows large size transfers to generate a single interrupt at the end of the entire transfer. The transfer is split up in packets of length specified in the Maximum Packet Size field for that endpoint. If the transfer size is not an integer multiple of the Maximum Packet Size, a short packet will be present at the end of the transfer. Under certain conditions this packet may be corrupted in the USB FIFO. Workaround: Use DMA mode 1 to transfer (n* Maximum Packet Size) and schedule DMA mode 0 to transfer the short packet. As an example if your transfer size is 33168 bytes and Maximum Packet Size equals 512, schedule [33168 - (33168 mod 512)] in DMA mode 1 and the remainder (33168 mod 512) in DMA mode 0. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Hema HK 提交于
Below crash observed with commit 7acc6197 (usb: musb: Idle path retention and offmode support for OMAP3) during board reboot. The musb clock was disabled when musb_shutdown() was called by platform_drv_shutdown in which there are register accesses. call pm_runtime_get_sync() and pm_runtime_put_sync() in the musb_shutdown function. / # [ 172.368774] Unhandled fault: imprecise external abort (0x1406) at 0x400f0000 [ 172.376190] Internal error: : 1406 [#1] SMP [ 172.380554] last sysfs file: /sys/devices/platform/omap/omap_i2c.4/i2c-4/i2c-dev/i2c-4/dev [ 172.389221] Modules linked in: [ 172.392456] CPU: 0 Tainted: G W (2.6.38-06671-geddecbb6 #33) [ 172.399475] PC is at do_raw_spin_unlock+0x50/0xc0 [ 172.404418] LR is at _raw_spin_unlock_irqrestore+0x24/0x44 [ 172.410186] pc : [<c069bfdc>] lr : [<c085a7f8>] psr: 60000093 [ 172.410186] sp : ee993e40 ip : c0d00240 fp : bea9cf14 [ 172.422241] r10: 00000000 r9 : ee992000 r8 : c04b2fa8 [ 172.427703] r7 : 00000000 r6 : c0fa46c0 r5 : ef966124 r4 : ef966124 [ 172.434539] r3 : ef92cbc0 r2 : ef92cbc0 r1 : 00000000 r0 : ef966124 [ 172.441406] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 172.448974] Control: 10c5387d Table: ae8d804a DAC: 00000015 [ 172.454986] Process init (pid: 1094, stack limit = 0xee9922f8) [ 172.461120] Stack: (0xee993e40 to 0xee994000) [ 172.465667] 3e40: a0000013 c085a7f8 ef966124 a0000013 c0fa46c0 c0761ab4 c0761a70 ef95c008 [ 172.474273] 3e60: ef95c014 c06e2fd0 c06e2fbc c06dea90 00000000 01234567 28121969 c04fccb4 [ 172.482849] 3e80: 00000000 c04fcd04 c0a302bc c04fce44 c0a02600 00000001 00000000 c085cd04 [ 172.491424] 3ea0: 00000000 00000002 c09ea000 c085afc0 ee993f24 00000000 00040001 00000445 [ 172.499999] 3ec0: a8eb9d34 00000027 00000000 00000000 00000000 c0a56a4c 00000000 00000000 [ 172.508575] 3ee0: 00000002 60000093 00000000 c0519aac 00000002 00000080 00000000 c0550420 [ 172.517150] 3f00: 00000000 00000002 ee970000 c0a56a3c c0a56a20 00000002 c0a56a3c 00000000 [ 172.525726] 3f20: c0a56a3c 0000000a c1580e00 c0a56a20 00000002 c0a56a3c c1580e00 c0a56a20 [ 172.534301] 3f40: ef92cbc0 c05173a0 00000001 ef92cbc0 c0576190 c04e3174 20000013 c0517324 [ 172.542877] 3f60: ef815c00 ee90b720 c04e3174 c0576190 00000001 ef92cbc0 c04b2f00 ffffffff [ 172.551483] 3f80: 00000058 c0517324 00000000 00000000 ffffffff 00000000 00000000 ffffffff [ 172.560058] 3fa0: 00000058 c04b2de0 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 172.568634] 3fc0: 00000000 00000000 ffffffff 00000058 00000000 00000001 400aa000 bea9cf14 [ 172.577209] 3fe0: 000ea148 bea9c958 000aa750 40225728 60000010 fee1dead 00000000 00000000 [ 172.585784] [<c069bfdc>] (do_raw_spin_unlock+0x50/0xc0) from [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44) [ 172.596588] [<c085a7f8>] (_raw_spin_unlock_irqrestore+0x24/0x44) from [<c0761ab4>] (musb_shutdown+0x44/0x88) [ 172.606933] [<c0761ab4>] (musb_shutdown+0x44/0x88) from [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18) [ 172.616699] [<c06e2fd0>] (platform_drv_shutdown+0x14/0x18) from [<c06dea90>] (device_shutdown+0x74/0xb4) [ 172.626647] [<c06dea90>] (device_shutdown+0x74/0xb4) from [<c04fccb4>] (kernel_restart_prepare+0x24/0x38) [ 172.636688] [<c04fccb4>] (kernel_restart_prepare+0x24/0x38) from [<c04fcd04>] (kernel_restart+0xc/0x48) [ 172.646545] [<c04fcd04>] (kernel_restart+0xc/0x48) from [<c04fce44>] (sys_reboot+0xfc/0x1d8) [ 172.655426] [<c04fce44>] (sys_reboot+0xfc/0x1d8) from [<c04b2de0>] (ret_fast_syscall+0x0/0x3c) [ 172.664459] Code: e3c3303f e594200c e593300c e1520003 (0a000002) [ 172.670867] ------------[ cut here ]------------ Signed-off-by: NHema HK <hemahk@ti.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Felipe Balbi 提交于
We are now using our own list_head, so we should be checking against that, not the gadget driver's list_head. Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Felipe Balbi 提交于
Due to the recent changes to musb's glue layers, we can't compile musb-hdrc as a module - compilation will break due to undefined symbol musb_debug. In order to fix that, we need a big re-work of the debug support on the MUSB driver. Because that would mean a lot of new code coming into the -rc series, it's best to defer that to next merge window and for now just disable module support for MUSB. Once we get the refactor of the debugging support done, we can simply revert this patch and things will go back to normal again. Cc: stable@kernel.org # v2.6.38 Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Dan Carpenter 提交于
"tx_ram" points to io memory. We can't dereference it directly. Sparse complains about this: "drivers/usb/musb/cppi_dma.c:1205:25: warning: dereference of noderef expression" Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Dan Carpenter 提交于
Gcc gives the following warnings: drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_tx_segment’: drivers/usb/musb/cppi_dma.c:600: warning: format ‘%x’ expects type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c: In function ‘cppi_next_rx_segment’: drivers/usb/musb/cppi_dma.c:822: warning: format ‘%x’ expects type ‘unsigned int’, but argument 9 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c: In function ‘cppi_rx_scan’: drivers/usb/musb/cppi_dma.c:1042: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 4 has type ‘dma_addr_t’ drivers/usb/musb/cppi_dma.c:1114: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 7 has type ‘dma_addr_t’ dma_addr_t is sometimes 32 bit and sometimes 64. We normally cast them to unsigned long long for printk(). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Dan Carpenter 提交于
Sparse complains (and rightly so): drivers/usb/musb/cppi_dma.c:1458:33: warning: Using plain integer as NULL pointer Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Dan Carpenter 提交于
We should unlock before returning here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Mian Yousaf Kaukab 提交于
musb code checks dma mask before calling dma hooks. Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Mian Yousaf Kaukab 提交于
On the completion of tx dma, dma is disabled by clearing MUSB_TXCSR_DMAENAB in TXCSR. If MUSB_TXCSR_AUTOSET was set in txstate() it will remain set although it is not needed in PIO mode. Clear it as soon as it is not needed. Signed-off-by: NMian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 12 4月, 2011 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: use proper interfaces for on-stack plugging xfs: fix xfs_debug warnings xfs: fix variable set but not used warnings xfs: convert log tail checking to a warning xfs: catch bad block numbers freeing extents. xfs: push the AIL from memory reclaim and periodic sync xfs: clean up code layout in xfs_trans_ail.c xfs: convert the xfsaild threads to a workqueue xfs: introduce background inode reclaim work xfs: convert ENOSPC inode flushing to use new syncd workqueue xfs: introduce a xfssyncd workqueue xfs: fix extent format buffer allocation size xfs: fix unreferenced var error in xfs_buf.c Also, applied patch from Tony Luck that fixes ia64: xfs_destroy_workqueues() should not be tagged with__exit in the branch before merging.
-
由 Luck, Tony 提交于
ia64 throws away .exit sections for the built-in CONFIG case, so routines that are used in other circumstances should not be tagged as __exit. Signed-off-by: NTony Luck <tony.luck@intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix data corruption regression by reverting commit 6de9843d ext4: Allow indirect-block file to grow the file size to max file size ext4: allow an active handle to be started when freezing ext4: sync the directory inode in ext4_sync_parent() ext4: init timer earlier to avoid a kernel panic in __save_error_info jbd2: fix potential memory leak on transaction commit ext4: fix a double free in ext4_register_li_request ext4: fix credits computing for indirect mapped files ext4: remove unnecessary [cm]time update of quota file jbd2: move bdget out of critical section
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux: nfsd4: fix oops on lock failure nfsd: fix auth_domain reference leak on nlm operations
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: dt/fsldma: fix build warning caused by of_platform_device changes spi: Fix race condition in stop_queue() gpio/pch_gpio: Fix output value of pch_gpio_direction_output() gpio/ml_ioh_gpio: Fix output value of ioh_gpio_direction_output() gpio/pca953x: fix error handling path in probe() call
-
由 Linus Torvalds 提交于
In commit 13583b16 ("PCI: refactor io size calculation code") Ram had a thinko in the refactorization of the code: the end result used the variable 'align' for the bus alignment, but the original code used 'min_align'. Since then, another use of that 'align' variable got introduced by commit c8adf9a3 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") Fix both of those uses to use 'min_align' as they should. Daniel Hellstrom <daniel@gaisler.com> Acked-by: NRam Pai <linuxram@us.ibm.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 4月, 2011 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...
-
由 Ira W. Snyder 提交于
Commit 00006124, "dt/powerpc: Eliminate users of of_platform_{,un}register_driver" forgot to convert the type of structure passed into platform_device_register() when it was converted from of_platform_device_register. Fix it. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Theodore Ts'o 提交于
Revert commit 6de9843d, since it caused a data corruption regression with BitTorrent downloads. Thanks to Damien for discovering and bisecting to find the problem commit. https://bugzilla.kernel.org/show_bug.cgi?id=32972Reported-by: NDamien Grassart <damien@grassart.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Kazuya Mio 提交于
We can create 4402345721856 byte file with indirect block mapping. However, if we grow an indirect-block file to the size with ftruncate(), we can see an ext4 warning. The following patch fixes this problem. How to reproduce: # dd if=/dev/zero of=/mnt/mp1/hoge bs=1 count=0 seek=4402345721856 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.000221428 s, 0.0 kB/s # tail -n 1 /var/log/messages Nov 25 15:10:27 test kernel: EXT4-fs warning (device sda8): ext4_block_to_path:345: block 1074791436 > max in inode 12 Signed-off-by: NKazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Yongqiang Yang 提交于
ext4_journal_start_sb() should not prevent an active handle from being started due to s_frozen. Otherwise, deadlock is easy to happen, below is a situation. ================================================ freeze | truncate ================================================ | ext4_ext_truncate() freeze_super() | starts a handle sets s_frozen | | ext4_ext_truncate() | holds i_data_sem ext4_freeze() | waits for updates | | ext4_free_blocks() | calls dquot_free_block() | | dquot_free_blocks() | calls ext4_dirty_inode() | | ext4_dirty_inode() | trys to start an active | handle | | block due to s_frozen ================================================ Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reported-by: NAmir Goldstein <amir73il@users.sf.net> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
-
由 Curt Wohlgemuth 提交于
ext4 has taken the stance that, in the absence of a journal, when an fsync/fdatasync of an inode is done, the parent directory should be sync'ed if this inode entry is new. ext4_sync_parent(), which implements this, does indeed sync the dirent pages for parent directories, but it does not sync the directory *inode*. This patch fixes this. Also now return error status from ext4_sync_parent(). I tested this using a power fail test, which panics a machine running a file server getting requests from a client. Without this patch, on about every other test run, the server is missing many, many files that had been synced. With this patch, on > 6 runs, I see zero files being lost. Google-Bug-Id: 4179519 Signed-off-by: NCurt Wohlgemuth <curtw@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Steve Glendinning 提交于
This patch adds support for SMSC's LAN9530, LAN9730 and LAN89530 USB ethernet controllers to the existing smsc95xx driver by adding their new USB VID/PID pairs. Signed-off-by: NSteve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Don't query connections for widgets have no connections ALSA: HDA: Fix single internal mic on ALC275 (Sony Vaio VPCSB1C5E) ALSA: hda - HDMI: Fix MCP7x audio infoframe checksums ALSA: usb-audio: define another USB ID for a buggy USB MIDI cable ALSA: HDA: Fix dock mic for Lenovo X220-tablet ASoC: format_register_str: Don't clip register values ASoC: PXA: Fix oops in __pxa2xx_pcm_prepare ASoC: zylonite: set .codec_dai_name in initializer
-
由 J. Bruce Fields 提交于
Lock stateid's can have access_bmap 0 if they were only partially initialized (due to a failed lock request); handle that case in free_generic_stateid. ------------[ cut here ]------------ kernel BUG at fs/nfsd/nfs4state.c:380! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/kernel/mm/ksm/run Modules linked in: nfs fscache md4 nls_utf8 cifs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc nfsd lockd nfs_acl auth_rpcgss sunrpc ipv6 ppdev parport_pc parport pcnet32 mii pcspkr microcode i2c_piix4 BusLogic floppy [last unloaded: mperf] Pid: 1468, comm: nfsd Not tainted 2.6.38+ #120 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[<e24f180d>] EFLAGS: 00010297 CPU: 0 EIP is at nfs4_access_to_omode+0x1c/0x29 [nfsd] EAX: ffffffff EBX: dd758120 ECX: 00000000 EDX: 00000004 ESI: dd758120 EDI: ddfe657c EBP: dd54dde0 ESP: dd54dde0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process nfsd (pid: 1468, ti=dd54c000 task=ddc92580 task.ti=dd54c000) Stack: dd54ddf0 e24f19ca 00000000 ddfe6560 dd54de08 e24f1a5d dd758130 deee3a20 ddfe6560 31270000 dd54df1c e24f52fd 0000000f dd758090 e2505dd0 0be304cf dbb51d68 0000000e ddfe657c ddcd8020 dd758130 dd758128 dd7580d8 dd54de68 Call Trace: [<e24f19ca>] free_generic_stateid+0x1c/0x3e [nfsd] [<e24f1a5d>] release_lockowner+0x71/0x8a [nfsd] [<e24f52fd>] nfsd4_lock+0x617/0x66c [nfsd] [<e24e57b6>] ? nfsd_setuser+0x199/0x1bb [nfsd] [<e24e056c>] ? nfsd_setuser_and_check_port+0x65/0x81 [nfsd] [<c07a0052>] ? _cond_resched+0x8/0x1c [<c04ca61f>] ? slab_pre_alloc_hook.clone.33+0x23/0x27 [<c04cac01>] ? kmem_cache_alloc+0x1a/0xd2 [<c04835a0>] ? __call_rcu+0xd7/0xdd [<e24e0dfb>] ? fh_verify+0x401/0x452 [nfsd] [<e24f0b61>] ? nfsd4_encode_operation+0x52/0x117 [nfsd] [<e24ea0d7>] ? nfsd4_putfh+0x33/0x3b [nfsd] [<e24f4ce6>] ? nfsd4_delegreturn+0xd4/0xd4 [nfsd] [<e24ea2c9>] nfsd4_proc_compound+0x1ea/0x33e [nfsd] [<e24de6ee>] nfsd_dispatch+0xd1/0x1a5 [nfsd] [<e1d6e1c7>] svc_process_common+0x282/0x46f [sunrpc] [<e1d6e578>] svc_process+0xdc/0xfa [sunrpc] [<e24de0fa>] nfsd+0xd6/0x115 [nfsd] [<e24de024>] ? nfsd_shutdown+0x24/0x24 [nfsd] [<c0454322>] kthread+0x62/0x67 [<c04542c0>] ? kthread_worker_fn+0x114/0x114 [<c07a6ebe>] kernel_thread_helper+0x6/0x10 Code: eb 05 b8 00 00 27 4f 8d 65 f4 5b 5e 5f 5d c3 83 e0 03 55 83 f8 02 89 e5 74 17 83 f8 03 74 05 48 75 09 eb 09 b8 02 00 00 00 eb 0b <0f> 0b 31 c0 eb 05 b8 01 00 00 00 5d c3 55 89 e5 57 56 89 d6 8d EIP: [<e24f180d>] nfs4_access_to_omode+0x1c/0x29 [nfsd] SS:ESP 0068:dd54dde0 ---[ end trace 2b0bf6c6557cb284 ]--- The trace route is: -> nfsd4_lock() -> if (lock->lk_is_new) { -> alloc_init_lock_stateid() 3739: stp->st_access_bmap = 0; ->if (status && lock->lk_is_new && lock_sop) -> release_lockowner() -> free_generic_stateid() -> nfs4_access_bmap_to_omode() -> nfs4_access_to_omode() 380: BUG(); ***** This problem was introduced by 0997b173. Reported-by: NMi Jinlong <mijinlong@cn.fujitsu.com> Tested-by: NMi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 10 4月, 2011 1 次提交
-
-
git://git.infradead.org/mtd-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/mtd-2.6: mtd: atmel_nand: use CPU I/O when buffer is in vmalloc(ed) region mtd: atmel_nand: modify test case for using DMA operations mtd: atmel_nand: fix support for CPUs that do not support DMA access mtd: atmel_nand: trivial: change DMA usage information trace mtd: mtdswap: fix printk format warning
-
- 09 4月, 2011 4 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Change initial mount authflavor only when server returns NFS4ERR_WRONGSEC NFS: Fix a signed vs. unsigned secinfo bug Revert "net/sunrpc: Use static const char arrays"
-
由 Randy Dunlap 提交于
Fix erroneous syscall kernel-doc comments in kernel/signal.c. Reported-by: NMatt Fleming <matt@console-pimps.org> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 4月, 2011 8 次提交
-
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] compile fix for latest binutils [S390] cio: prevent purging of CCW devices in the online state [S390] qdio: fix init sequence [S390] Fix parameter passing for smp_switch_to_cpu() [S390] oprofile s390: prevent stack corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Don't write quota info in dquot_commit() ext3: Fix writepage credits computation for ordered mode
-
由 Christoph Hellwig 提交于
Add proper blk_start_plug/blk_finish_plug pairs for the two places where we issue buffer I/O, and remove the blk_flush_plug in xfs_buf_lock and xfs_buf_iowait, given that context switches already flush the per-process plugging lists. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
For a CONFIG_XFS_DEBUG=n build gcc complains about statements with no effect in xfs_debug: fs/xfs/quota/xfs_qm_syscalls.c: In function 'xfs_qm_scall_trunc_qfiles': fs/xfs/quota/xfs_qm_syscalls.c:291:3: warning: statement with no effect The reason for that is that the various new xfs message functions have a return value which is never used, and in case of the non-debug build xfs_debug the macro evaluates to a plain 0 which produces the above warnings. This can be fixed by turning xfs_debug into an inline function instead of a macro, but in addition to that I've also changed all the message helpers to return void as we never use their return values. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
GCC 4.6 now warnings about variables set but not used. Fix the trivially fixable warnings of this sort. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Yevgeny Petrilin 提交于
If not done, second attempt to open the RX ring would cause memory corruption. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
When bringing the port up, performing a SENSE_PORT command To try and check to which physical link type (IB or Ethernet) the physical port is connected. In case there is no valid link partner, the port will come up as its supported default. Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Chinner 提交于
On the Power platform, the log tail debug checks fire excessively causing the system to panic early in testing. The debug checks are known to be racy, though on x86_64 there is no evidence that they trigger at all. We want to keep the checks active on debug systems to alert us to problems with log space accounting, but we need to reduce the impact of a racy check on testing on the Power platform. As a result, convert the ASSERT conditions to warnings, and allow them to fire only once per filesystem mount. This will prevent false positives from interfering with testing, whilst still providing us with the indication that they may be a problem with log space accounting should that occur. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-