- 04 8月, 2010 4 次提交
-
-
由 Mike Rapoport 提交于
Most OMAP3-based boards use exactly the same code for .map_io method in the machine_desc structure. This patch introduces omap3_map_io and updates board-* files to use it as .map_io method. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Sergio Aguirre 提交于
The only difference between them is the physical address of the uart4 port, which is only present in 36xx chips. We don't really need to care about keeping these 2 functions, since the decision to use uart4 is more cleanly done later when we do have access to omap_revision variable. Signed-off-by: NSergio Aguirre <saaguirre@ti.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: added comment for the uart4_phys] Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits) ARM: AMBA: Add pclk support to AMBA bus infrastructure ARM: 6278/2: fix regression in RealView after the introduction of pclk ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY ARM: 6246/1: mmci: support larger MMCIDATALENGTH register ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants ARM: 6244/1: mmci: add variant data and default MCICLOCK support ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback ARM: 6274/1: add global control registers definition header file for nuc900 mx2_camera: fix type of dma buffer virtual address pointer mx2_camera: Add soc_camera support for i.MX25/i.MX27 arm/imx/gpio: add spinlock protection ARM: Add support for the LPC32XX arch ARM: LPC32XX: Arch config menu supoport and makefiles ARM: LPC32XX: Phytec 3250 platform support ARM: LPC32XX: Misc support functions ARM: LPC32XX: Serial support code ARM: LPC32XX: System suspend support ARM: LPC32XX: GPIO, timer, and IRQ drivers ARM: LPC32XX: Clock driver ...
-
由 Helge Deller 提交于
avoid potential stack overflow by correctly checking count parameter Reported-by: NIlja <ilja@netric.org> Signed-off-by: NHelge Deller <deller@gmx.de> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 8月, 2010 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Trond Myklebust 提交于
nfs_commit_inode() needs to be defined irrespectively of whether or not we are supporting NFSv3 and NFSv4. Allow the compiler to optimise away code in the NFSv2-only case by converting it into an inlined stub function. Reported-and-tested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 7月, 2010 19 次提交
-
-
由 Russell King 提交于
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/kernel/setup.c arch/arm/mm/init.c
-
由 Russell King 提交于
Conflicts: arch/arm/mm/init.c
-
由 Russell King 提交于
Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel
-
由 Russell King 提交于
-
由 Russell King 提交于
Some platforms gate the pclk (APB - the bus - clock) to the peripherals for power saving, along with the functional clock. When devices are accessed without pclk enabled, the kernel will oops. This gives them two options: 1. Leave all clocks on all the time. 2. Attempt to gate pclk along with the functional clock. (With some hardware, pclk and the functional clock are gated by a single bit in a register.) (1) has the disadvantage that it causes increased power usage, which is bad news for battery operated devices. (2) can lead to kernel oops if registers are accessed without the functional clock being enabled. So, introduce the apb_pclk signal in such a way existing drivers don't need to be updated. Essentially, this means we guarantee that: 1. pclk will be enabled whenever the driver is bound to a device - from probe() to remove() time. 2. pclk will also be enabled when reading the primecell IDs from the device. In order to allow drivers to be incrementally updated to achieve greater power savings, we provide two additional calls to allow drivers to manage the pclk - amba_pclk_enable()/amba_pclk_disable(). Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
The patch to add the apb_pclk to the AMBA/PrimeCell bus broke RealView, since the clockdevice is not registered at probe() time. This moves clock initialization to a core_initcall() [rmk:moved before the problematical commit to avoid bisect problems] Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: cyber2000fb: fix console in truecolor modes cyber2000fb: fix machine hang on module load SA1111: Eliminate use after free ARM: Fix Versatile/Realview/VExpress MMC card detection sense ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt ARM: Add barriers to io{read,write}{8,16,32} accessors as well ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE ARM: 6272/1: Convert L2x0 to use the IO relaxed operations ARM: 6271/1: Introduce *_relaxed() I/O accessors ARM: 6275/1: ux500: don't use writeb() in uncompress.h ARM: 6270/1: clean files in arch/arm/boot/compressed/ ARM: Fix csum_partial_copy_from_user()
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Ensure that writepage respects the nonblock flag NFS: kswapd must not block in nfs_release_page nfs: include space for the NUL in root path
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/edid: Fix the HDTV hack sync adjustment drm/radeon/kms: fix radeon mid power profile reporting
-
由 Hugh Dickins 提交于
Debian's ia64 autobuilders have been seeing kernel freeze or reboot when running the gdb testsuite (Debian bug 588574): dannf bisected to 2.6.32 62eede62 "mm: ZERO_PAGE without PTE_SPECIAL"; and reproduced it with gdb's gcore on a simple target. I'd missed updating the gate_vma handling in __get_user_pages(): that happens to use vm_normal_page() (nowadays failing on the zero page), yet reported success even when it failed to get a page - boom when access_process_vm() tried to copy that to its intermediate buffer. Fix this, resisting cleanups: in particular, leave it for now reporting success when not asked to get any pages - very probably safe to change, but let's not risk it without testing exposure. Why did ia64 crash with 16kB pages, but succeed with 64kB pages? Because setup_gate() pads each 64kB of its gate area with zero pages. Reported-by: NAndreas Barth <aba@not.so.argh.org> Bisected-by: Ndann frazier <dannf@debian.org> Signed-off-by: NHugh Dickins <hughd@google.com> Tested-by: Ndann frazier <dannf@dannf.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Remove the __exit mark from cifs_exit_dns_resolver() as it's called by the module init routine in case of error, and so may have been discarded during linkage. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ondrej Zary 提交于
Return value was not set to 0 in setcolreg() with truecolor modes. This causes fb_set_cmap() to abort after first color, resulting in blank palette - and blank console in 24bpp and 32bpp modes. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ondrej Zary 提交于
I was testing two CyberPro 2000 based PCI cards on x86 and the machine always hanged completely when the cyber2000fb module was loaded. It seems that the card hangs when some registers are accessed too quickly after writing RAMDAC control register. With this patch, both card work. Add delay after RAMDAC control register write to prevent hangs on module load. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Julia Lawall 提交于
__sa1111_remove always frees its argument, so the subsequent reference to sachip->saved_state represents a use after free. __sa1111_remove does not appear to use the saved_state field, so the patch simply frees it first. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E2; @@ __sa1111_remove(E) ... ( E = E2 | * E ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The MMC card detection sense has become really confused with negations at various levels, leading to some platforms not detecting inserted cards. Fix this by converting everything to positive logic throughout, thereby getting rid of these negations. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Gary King 提交于
smp_processor_id() must not be called from a preemptible context (this is checked by CONFIG_DEBUG_PREEMPT). kmap_high_l1_vipt() was doing so. This lead to a problem where the wrong per_cpu kmap_high_l1_vipt_depth could be incremented, causing a BUG_ON(*depth <= 0); in kunmap_high_l1_vipt(). The solution is to move the call to smp_processor_id() after the call to preempt_disable(). Originally by: Andrew Howe <ahowe@nvidia.com> Signed-off-by: NGary King <gking@nvidia.com> Acked-by: NNicolas Pitre <nico.as.pitre@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
See https://bugzilla.kernel.org/show_bug.cgi?id=16056 If other processes are blocked waiting for kswapd to free up some memory so that they can make progress, then we cannot allow kswapd to block on those processes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Dan Carpenter 提交于
In root_nfs_name() it does the following: if (strlen(buf) + strlen(cp) > NFS_MAXPATHLEN) { printk(KERN_ERR "Root-NFS: Pathname for remote directory too long.\n"); return -1; } sprintf(nfs_export_path, buf, cp); In the original code if (strlen(buf) + strlen(cp) == NFS_MAXPATHLEN) then the sprintf() would lead to an overflow. Generally the rest of the code assumes that the path can have NFS_MAXPATHLEN (1024) characters and a NUL terminator so the fix is to add space to the nfs_export_path[] buffer. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 7月, 2010 9 次提交
-
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] etr: fix clock synchronization race [S390] Fix IRQ tracing in case of PER
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: update MAINTAINERS entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add a PC-beep workaround for ASUS P5-V ALSA: hda - Assume PC-beep as default for Realtek ALSA: hda - Don't register beep input device when no beep is available ALSA: hda - Fix pin-detection of Nvidia HDMI
-
由 David Howells 提交于
Fix __task_cred()'s lockdep check by removing the following validation condition: lockdep_tasklist_lock_is_held() as commit_creds() does not take the tasklist_lock, and nor do most of the functions that call it, so this check is pointless and it can prevent detection of the RCU lock not being held if the tasklist_lock is held. Instead, add the following validation condition: task->exit_state >= 0 to permit the access if the target task is dead and therefore unable to change its own credentials. Fix __task_cred()'s comment to: (1) discard the bit that says that the caller must prevent the target task from being deleted. That shouldn't need saying. (2) Add a comment indicating the result of __task_cred() should not be passed directly to get_cred(), but rather than get_task_cred() should be used instead. Also put a note into the documentation to enforce this point there too. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
It's possible for get_task_cred() as it currently stands to 'corrupt' a set of credentials by incrementing their usage count after their replacement by the task being accessed. What happens is that get_task_cred() can race with commit_creds(): TASK_1 TASK_2 RCU_CLEANER -->get_task_cred(TASK_2) rcu_read_lock() __cred = __task_cred(TASK_2) -->commit_creds() old_cred = TASK_2->real_cred TASK_2->real_cred = ... put_cred(old_cred) call_rcu(old_cred) [__cred->usage == 0] get_cred(__cred) [__cred->usage == 1] rcu_read_unlock() -->put_cred_rcu() [__cred->usage == 1] panic() However, since a tasks credentials are generally not changed very often, we can reasonably make use of a loop involving reading the creds pointer and using atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero. If successful, we can safely return the credentials in the knowledge that, even if the task we're accessing has released them, they haven't gone to the RCU cleanup code. We then change task_state() in procfs to use get_task_cred() rather than calling get_cred() on the result of __task_cred(), as that suffers from the same problem. Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be tripped when it is noticed that the usage count is not zero as it ought to be, for example: kernel BUG at kernel/cred.c:168! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/kernel/mm/ksm/run CPU 0 Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex 745 RIP: 0010:[<ffffffff81069881>] [<ffffffff81069881>] __put_cred+0xc/0x45 RSP: 0018:ffff88019e7e9eb8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0 RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0 R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001 FS: 00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0) Stack: ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45 <0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000 <0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246 Call Trace: [<ffffffff810698cd>] put_cred+0x13/0x15 [<ffffffff81069b45>] commit_creds+0x16b/0x175 [<ffffffff8106aace>] set_current_groups+0x47/0x4e [<ffffffff8106ac89>] sys_setgroups+0xf6/0x105 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00 48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b 04 25 00 cc 00 00 48 3b b8 58 04 00 00 75 RIP [<ffffffff81069881>] __put_cred+0xc/0x45 RSP <ffff88019e7e9eb8> ---[ end trace df391256a100ebdd ]--- Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Magnus Damm 提交于
Introduce SHMOBILE_TIMER_HZ for SH-Mobile. Allow users to select HZ on their system to minimize potential timer drift. Use 128 Hz as default to work well with the 32768 Hz RCLK. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Magnus Damm 提交于
NR_IRQS_LEGACY is now defined in asm/irq.h, so drop it in mach/irqs.h. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
-
由 Wim Van Sebroeck 提交于
Add Mailing-list and website to watchdog MAINTAINERS entry. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 29 7月, 2010 6 次提交
-
-
-
-
由 Rabin Vincent 提交于
The Ux500 variant has a 24-bit MMCIDATALENGTH register, as opposed to the 16-bit one on the ARM version. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Although both the U300 and Ux500 use ST variants, the HWFCEN bits are at different positions, so use the variant_data to store the information. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Add a variant_data structure to handle the differences between the various variants of this peripheral. Add a first quirk for a default MCICLOCK value, required on the Ux500 variant where the enable bit needs to be always set, since it controls access to some registers. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
Platforms may have some external power control which need to be controlled from board specific code. Rename the translate_vdd() callback to vdd_handler() and pass it the power mode. Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-