- 29 1月, 2009 5 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
This patch updates the Migo-R defconfig to include ov772x camera and tw9910 video driver Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code powerpc/pseries: Correct VIO bus accounting problem in CMO env. powerpc: More printing warning fixes for the l64 to ll64 conversion powerpc: Remove arch/ppc cruft from Kconfig powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c powerpc/embedded6xx: Update defconfigs powerpc/8xx: Update defconfigs powerpc/86xx: Update defconfigs powerpc/83xx: Update defconfigs powerpc/85xx: Update defconfigs powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed powerpc/4xx: Update multi-board PowerPC 4xx defconfigs powerpc/44x: Update PowerPC 44x defconfigs powerpc/40x: Update PowerPC 40x defconfigs powerpc/85xx: Fix typo in mpc8572ds dts powerpc/44x: Warp patches for the new NDFC driver powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 5329 ColdFire periphal addressing uclinux: add process name to allocation error message m68knommu: correct the mii calculations for 532x ColdFire FEC m68knommu: add ColdFire M532x to the FEC configuration options m68knommu: fix syscall restarting m68knommu: remove the obsolete and long unused comempci chip support m68knommu: remove the no longer used PCI support option m68knommu: remove obsolete and unused eLIA board m68knommu: set NO_DMA m68knommu: fix cache flushing for the 527x ColdFire processors m68knommu: fix ColdFire 5272 serial baud rates in mcf.c m68knommu: use one exist from execption
-
- 28 1月, 2009 35 次提交
-
-
由 Kumar Gala 提交于
Commit d7b1956f ("DMI: Introduce dmi_first_match to make the interface more flexible") introduced compile errors like the following when !CONFIG_DMI drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff': drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match' drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast We just need a dummy version of dmi_first_match() to fix this all up. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Anholt 提交于
Schedule a vblank signal, kill the process, and we'll go walking over freed memory. Given that no open-source userland exists using this, nor have I ever heard of a consumer, just let this code die. Signed-off-by: NEric Anholt <eric@anholt.net> Requested-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NDave Airlie <airlied@linux.ie> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gerhard Pircher 提交于
_PAGE_COHERENT is now always set in _PAGE_RAM resp. PAGE_KERNEL. Thus it has to be masked out, if the BAT mapping should be non cacheable or CPU_FTR_NEED_COHERENT is not set. This will work on normal SMP setups because we force-set CPU_FTR_NEED_COHERENT as part of CPU_FTR_COMMON on SMP. Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Robert Jennings 提交于
In the VIO bus code the wrappers for dma alloc_coherent and free_coherent calls are rounding to IOMMU_PAGE_SIZE. Taking a look at the underlying calls, the actual mapping is promoted to PAGE_SIZE. Changing the rounding in these two functions fixes under-reporting the entitlement used by the system. Without this change, the system could run out of entitlement before it believes it has and incur mapping failures at the firmware level. Also in the VIO bus code, the wrapper for dma map_sg is not exiting in an error path where it should. Rather than fall through to code for the success case, this patch adds the return that is needed in the error path. Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
These are all powerpc specific drivers. res.start in fsl_elbc_nand.c needs to be cast since it may be either 32 or 64 bit. Thanks to Scott Wood for noticing. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Josh Boyer 提交于
Remove some leftover cruft from the arch/ppc days Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Manual merge of: arch/powerpc/configs/44x/warp_defconfig
-
由 Benjamin Herrenschmidt 提交于
-
由 Casey Schaufler 提交于
Given just how hard it is to find the code that uses MAY_APPEND it's probably not a big surprise that this went unnoticed for so long. The Smack rules loading code is incorrectly setting the MAY_READ bit when MAY_APPEND is requested. Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com> Reviewed-by: NJames Morris <jmorris@namei.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (36 commits) USB: Driver for Freescale QUICC Engine USB Host Controller USB: option: add QUANTA HSDPA Data Card device ids USB: storage: Add another unusual_dev for off-by-one bug USB: unusual_dev: usb-storage needs to ignore a device USB: GADGET: fix !x & y USB: new id for ti_usb_3410_5052 driver USB: cdc-acm: Add another conexant modem to the quirks USB: 'option' driver - onda device MT503HS has wrong id USB: Remove ZTE modem from unusual_devices USB: storage: support of Dane-Elec MediaTouch USB device USB: usbmon: Implement compat_ioctl USB: add kernel-doc for wusb_dev in struct usb_device USB: ftdi_sio driver support of bar code scanner from Diebold USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID USB: cp2101 device USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440 USB: remove vernier labpro from ldusb USB: CDC-ACM quirk for MTK GPS USB: cdc-acm: support some gps data loggers USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index ...
-
由 Anton Vorontsov 提交于
This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alex.Cheng@quantatw.com 提交于
This patch adds the support for the QUANTA Q101 series HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: NAlex Cheng <alex.cheng@quantatw.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Dibowitz 提交于
Argosy has released another device with the off-by-one sector. This is a harddrive with an internal cardreader which is affected. Based on a patch written by Martijn Hijdra <martijn.hijdra@gmail.com> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Cc: Martijn Hijdra <martijn.hijdra@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Dibowitz 提交于
This patch adds an unusual_devs entry for a Sony Ericsson modem. Like many other modems, we have to ignore the storage device in order to access the modem. At this time usb_modeswitch does not work with this device. Reported-by: The Solutor <thesolutor@gmail.com>. Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roel Kluin 提交于
! has a higher precedence than & Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
This adds a new device id Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Cox 提交于
Another Conexant, another device with the same quirk Signed-off-by: NAlan Cox <alan@redhat.com> Acked-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Marcel Sebek 提交于
While trying to make GSM modem Onda MT503HS working, I found a mismatch between device id in the driver code (0x0200) and id in the lsusb output (0x2000). This patch fixed it for me, but I don't know if the original device id was also correct and the new ID should be added instead of replacing the old one. Signed-off-by: NMarcel Sebek <sebek64@post.cz> Acked-by: NDomenico Riccio <domenico.riccio@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Phil Dibowitz 提交于
The ZTE modem entry causes usb-storage to ignore the device, but for some versions of the device, usb-storage mode is required to get to modem ode. For both kinds the tool: http://www.draisberghof.de/usb_modeswitch/ should work. Note that the various versions of the device have the same ProductId, VendorId, and bcdDevice number, so we cannot have the entry for some and not others. Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean-Baptiste Onofre 提交于
This adds another unusual_devs.h entry for a device that can't handle more than 64k reads/writes in a single command. Signed-off-by: NJean-Baptiste Onofre <jb@nanthrax.net> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Running a 32-bit usbmon(8) on 2.6.28-rc9 produces the following: ioctl32(usbmon:28563): Unknown cmd fd(3) cmd(400c9206){t:ffffff92;sz:12} arg(ffd3f458) on /dev/usbmon0 It happens because the compatibility mode was implemented for 2.6.18 and not updated for the fsops.compat_ioctl API. This patch relocates the pieces from under #ifdef CONFIG_COMPAT into compat_ioctl with no other changes except one new whitespace. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Inaky Perez-Gonzalez 提交于
Reported by Randy Dunlap from a warning on the v2.6.29 merge window. Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mhayk Whandson 提交于
Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: NMhayk Whandson <eu@mhayk.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Robie Basak 提交于
This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: NRobie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tomasz K 提交于
My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider, PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c From: Tomasz K <eros81@o2.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Brandon Philips 提交于
My Brother HL-1440 would print one document before CUPS would stop printing with the error "Printer not connected; will retry in 30 seconds...". I traced this down to the CUPS usb backend getting an EIO out of usblp on the IOCNR_GET_DEVICE_ID IOCTL. Adding the USBLP_QUIRK_BIDIR fixes the problem but is it the right solution? output from strace /usr/lib/cups/backend/usb after printing a document (Note: SNDCTL_DSP_SYNC == IOCNR_GET_DEVICE_ID): before patch open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3 ioctl(3, SNDCTL_DSP_SYNC, 0x7fff2478cef0) = -1 EIO (Input/output error) after patch open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3 ioctl(3, SNDCTL_DSP_SYNC, 0x7fffb8d474c0) = 0 Possibly related bug: https://bugs.launchpad.net/ubuntu/+source/cupsys/+bug/35638Signed-off-by: NBrandon Philips <bphilips@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 sware 提交于
Labpro device is in both ldusb and vstusb device tables. Should only be a vstusb device. Signed-off-by: Nstephen ware <stephen.ware@eqware.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Andrew Lunn 提交于
This patch adds a device quirk for a MediaTek Inc GPS chipset. The device implements USB CDC ACM, but is missing the union descriptor, so the ACM class driver fails to probe the device. I've tested this patch with an iBlue A+ GPS which uses this chipset and using kernel 2.6.28-rc9. Signed-off-by: NAndrew Lunn, <andrew@lunn.ch> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 James A. Treacy 提交于
Below is a patch which allows a number of GPS loggers to work under linux. It is known to support the i-Blue 747 (all models), i-Blue 757, Qstarz BT-Q1000, i.Trek Z1, Konet BGL-32, and the Holux M-241. From: James A. Treacy <treacy@debian.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bryan Wu 提交于
USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index In some usb gadget driver, for example usb audio class device, the high byte of w_index is the entity id and low byte is the interface number. If we use the 2 bytes of w_index as the array number, we will get a wrong pointer or NULL pointer. This patch fixes this issue. Signed-off-by: NBryan Wu <cooloney@kernel.org> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
The Blackfin MUSB Kconfig text didn't properly parenthesise its dependencies. This was visible in non-Blackfin configs by the way the user interfaces lost track of dependencies, when doing a bunch of test builds. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Swaminathan S 提交于
Initializes the actual_len field to 0 before every DMA transaction. Signed-off-by: NSwaminathan S <swami.iyer@ti.com> Acked-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hugo Villeneuve 提交于
These compilation errors are related to incorrect debugging macro and variable names and generated the following errors: drivers/usb/musb/cppi_dma.c:437:5: warning: "MUSB_DEBUG" is not defined drivers/usb/musb/cppi_dma.c: In function 'cppi_next_rx_segment': drivers/usb/musb/cppi_dma.c:884: error: 'debug' undeclared (first use in this function) Signed-off-by: NHugo Villeneuve <hugo@hugovil.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-