- 16 11月, 2011 1 次提交
-
-
由 Dmitry Torokhov 提交于
The PM methods are basically the same for SPI and I2C busses, so let's use the same dev_pm_ops for both of them. Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 11月, 2011 1 次提交
-
-
由 JJ Ding 提交于
With commit 67d0a075 we mark strict_strtox as obsolete. Convert all remaining such uses in drivers/input/. Also change long to appropriate types, and return error conditions from kstrtox separately, as Dmitry sugguests. Signed-off-by: NJJ Ding <dgdunix@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 03 8月, 2011 1 次提交
-
-
由 Michael Hennerich 提交于
Input close or device disable should not interact with the exported gpiolib functionality. However that's the case. __ad7879_disable() clears the entire AD7879_REG_CTRL2, while it should just power down the ADC and its reference. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 29 10月, 2010 1 次提交
-
-
由 Michael Hennerich 提交于
Considering following scenario - the touch is present on the screen at the beginning of the last conversion sequence, but by the time the last sequence is finished, the finger is lift off. The AD7879 data available interrupt signals (DAV) completion, however some X,Y values are not valid because the screen inputs were floating during the acquisition. The AD7877 acts differently here, since it only asserts DAV if the touch is still present when the conversion sequence finished. Based on the fact that this can only happen in the last sample of the repeated conversion sequence, we simply skip the last (short glitches are filtered by the AD7879 internal median and average filters). This doesn't cause noticeable side effects, since the minimum conversion interval is 9.44ms. We receive ~100 waypoint samples per second, so we simply delay the result by 9.44ms. We also reject samples where pressure is greater than pressure_max. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 04 7月, 2010 3 次提交
-
-
由 Michael Hennerich 提交于
Some input events users such as Android require BTN_TOUCH events. Implement EV_KEY/BTN_TOUCH and make sure that the release event is not erroneous scheduled without a preceding valid touch. Avoid duplicated BTN_TOUCH events, even though input core filters them. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Tested-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Mike Frysinger 提交于
The ad7879 driver is using the old bus method of only supporting one at a time (I2C or SPI). So refactor it like the other input drivers that support multiple busses simultaneously. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 01 7月, 2010 1 次提交
-
-
由 Dmitry Torokhov 提交于
Tested-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 03 6月, 2010 1 次提交
-
-
由 Wolfram Sang 提交于
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b0 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NRichard Purdie <rpurdie@linux.intel.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 19 1月, 2010 1 次提交
-
-
由 Michael Hennerich 提交于
Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 06 10月, 2009 1 次提交
-
-
由 Michael Hennerich 提交于
If the sub-probe functions fail, we need to pass up the error code to the higher levels from the probe function. We currently always return 0 even if there was an error so higher levels don't report problems. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 23 9月, 2009 1 次提交
-
-
由 Anton Vorontsov 提交于
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 9月, 2009 1 次提交
-
-
由 Michael Hennerich 提交于
The AD7889 is a new part but 100% software compatible with the AD7879, so add it to the id_table and help text. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 4月, 2009 1 次提交
-
-
由 Michael Hennerich 提交于
This patch removes depreciated IRQF_SAMPLE_RANDOM flags from ad7877 and ad7879 touchscreen drivers. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 3月, 2009 1 次提交
-
-
由 Michael Hennerich 提交于
[randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-