We put INT_MAX since this is the max value that can be held.
Though there is no hardware limitation, this is practically
a large enough number so we can use it.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove from the driver the limitation imposed by firmware check
to not allow change of atomic permissions for indirect UMRs.
In order to avoid failures on old firmware, we only ask for change
of atomic permissions if atomic operations are supported.

Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace the pre-defined macro signifying inline umr instead
of the numerical constant.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When we create flow steering rule, we need to save the related QP in the
ib_flow struct. this QP is used in destroy flow.

Move the QP assignment from ib_uverbs_ex_create_flow into ib_create_flow,
this would allow both kernel and userspace consumers to use it.

This bug wasn't seen in the wild because there are no kernel consumers
currently in the kernel.

Fixes: 319a441d ("IB/core: Add receive flow steering support")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When creating a FWD rule using tc create also a HW counter
for this rule.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Currently the code supports only drop rules to possess counters,
add that ability also for fwd rules.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Currently when calling mlx5_add_flow_rule we accept
only one flow destination, this commit allows to pass
multiple destinations.

This change forces us to change the return structure to a more
flexible one. We introduce a flow handle (struct mlx5_flow_handle),
it holds internally the number for rules created and holds an array
where each cell points the to a flow rule.

From the consumers (of mlx5_add_flow_rule) point of view this
change is only cosmetic and requires only to change the type
of the returned value they store.

From the core point of view, we now need to use a loop when
allocating and deleting rules (e.g given to us a flow handler).
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

When adding a new rule, if we can match it with compare_match_value and
flow tag we might be able to insert the rule to the same fte.
In order to do that, there must be an overlap between the actions of the
fte and the new rule.

When updating the action of an existing fte, we must tell the firmware
we are doing so.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

The way we compare between two dests will need to be used in other
places in the future, so we factor out the comparison logic
between two dests into a separate function.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

An fte status becomes FS_FTE_STATUS_EXISTING only after it was
created in HW. We can use this in order to simplify the logic on
what firmware command to use. If the status isn't FS_FTE_STATUS_EXISTING
we need to create the fte, otherwise we need only to update it.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

When adding a new rule to an fte, we need to hold the fte lock
until we add that rule to the fte and increase the fte ref count.

Fixes: 0c56b975 ("net/mlx5_core: Introduce flow steering API")
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Implement the vf set rate ndo by modifying the TSAR vport rate limit.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Add TSAR to the eswitch which will act as the vports rate limiter.
Create/Destroy TSAR on Enable/Dsiable SRIOV.
Attach/Detach vport to eswitch TSAR on Enable/Disable vport.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

TSAR (stands for Transmit Scheduling ARbiter) is a hardware component
that is responsible for selecting the next entity to serve on the
transmit path.
The arbitration defines the QoS policy between the agents connected to
the TSAR.
The TSAR is a consist two main features:
1) BW Allocation between agents:
The TSAR implements a defecit weighted round robin between the agents.
Each agent attached to the TSAR is assigned with a weight and it is
awarded transmission tokens according to this weight.
2) Rate limer per agent:
Each agent attached to the TSAR is (optionally) assigned with a rate
limit.
TSAR will not allow scheduling for an agent exceeding its defined rate
limit.

In this patch we implement the API of manipulating the TSAR.
Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

For the mlx5 driver to support ConnectX-5 PCIe 4.0 VFs, we add the
device ID "0x101a" to mlx5_core_pci_table.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

According to PRM async_event_mask have to be 64 bits long.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

SRQ physical address structure field should be in big-endian format.
Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Update struct mlx5_ifc_xrqc_bits according to last specification
Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Do not dispatch unknown mlx5 core events on mlx5_ib_event.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Pull x86 bugfix from Thomas Gleixner:
 "A single bugfix for the recent changes related to registering the boot
  cpu when this has not happened before prefill_possible_map().

  The main problem with this change got fixed already, but we missed the
  case where the local APIC is not yet mapped, when prefill_possible_map()
  is invoked, so the registration of the boot cpu which has the APIC bit
  set in CPUID will explode.

  I should have seen that issue earlier, but all I can do now is feeling
  embarassed"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smpboot: Init apic mapping before usage

Pull ubi/ubifs fixes from Richard Weinberger:
 "This contains fixes for issues in both UBI and UBIFS:

   - A regression wrt overlayfs, introduced in -rc2.
   - An UBI issue, found by Dan Carpenter's static checker"

* tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifs:
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc driver fixes for reported issues.

  The "biggest" are two binder fixes for reported issues that have been
  shipping in Android phones for a while now, the others are various
  fixes for reported problems.

  And there's a MAINTAINERS update for good measure.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  extcon: qcom-spmi-misc: Sync the extcon state on interrupt
  hv: do not lose pending heartbeat vmbus packets
  mei: txe: don't clean an unprocessed interrupt cause.
  ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
  ANDROID: binder: Add strong ref checks

Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes

Correct regulator handling on Rockchip arm64 boards to make
bind/unbind calls work correctly and remove a sdio-only
property from non-sdio mmc hosts, that accidentially was
added there.

* tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes

This pull request contains a single fix for Broadcom ARM64-based SoCs:

- Ray adds the required bus width and OOB sector size properties to the
  Northstar 2 SVK reference board in order for the NAND controller to work
  properly

* tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux:
  arm64: dts: Updated NAND DT properties for NS2 SVK
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.9:
 - A couple of patches from Fabio to fix the GPC power domain regression
   which is caused by PM Domain core change 0159ec67
   ("PM / Domains: Verify the PM domain is present when adding a
   provider"), and a related kernel crash seen with multi_v7_defconfig
   build.
 - Correct the PHY ID mask for AR8031 to match phy driver code.
 - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC.
 - Correct vf610 global timer IRQ flag to avoid warning from gic driver
   after commit 992345a5 ("irqchip/gic: WARN if setting the
   interrupt type for a PPI fails").

* tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes

UniPhier ARM SoC fixes for v4.9

- Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig
- Rename wrongly-named mioctrl to sdctrl

* tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull driver core fixes from Greg KH:
 "Here are two small driver core / kernfs fixes for 4.9-rc3.

  One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more
  explicit that this is a crazy thing to enable for a distro kernel
  (thanks for trying Fedora!), the other resolves an issue with vim
  opening kernfs files (sysfs, configfs, etc.)

  Both have been in linux-next with no reported issues"

* tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger
  kernfs: Add noop_fsync to supported kernfs_file_fops

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for reported issues
  for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a
  sysfs file that was obviously wrong, and had never been tested, so it
  was moved to debugfs as that is where it belongs. The others are small
  bug fixes for reported issues with various staging or iio drivers.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  greybus: fix a leak on error in gb_module_create()
  greybus: es2: fix error return code in ap_probe()
  greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state()
  staging: android: ion: Fix error handling in ion_query_heaps()
  iio: accel: sca3000_core: avoid potentially uninitialized variable
  iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
  staging/lustre/llite: Move unstable_stats from sysfs to debugfs
  Staging: wilc1000: Fix kernel Oops on opening the device
  staging: android/ion: testing the wrong variable
  Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev
  Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev
  iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors
  iio: maxim_thermocouple: Align 16 bit big endian value of raw reads

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for reported
  issues for 4.9-rc3. Nothing major, but they do resolve a bunch of
  problems with the tty core changes that are in 4.9-rc1, and finally
  the atmel serial driver is back working properly.

  All have been in linux-next with no reported issues"

* tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup
  tty: serial_core: Fix serial console crash on port shutdown
  tty/serial: at91: fix hardware handshake on Atmel platforms
  vt: clear selection before resizing
  sc16is7xx: always write state when configuring GPIO as an output
  sh-sci: document R8A7743/5 support
  tty: serial: 8250: 8250_core: NXP SC16C2552 workaround
  tty: limit terminal size to 4M chars
  tty: serial: fsl_lpuart: Fix Tx DMA edge case
  serial: 8250_lpss: enable MSI for sure
  serial: core: fix console problems on uart_close
  serial: 8250_uniphier: fix clearing divisor latch access bit
  serial: 8250_uniphier: fix more unterminated string
  serial: pch_uart: add terminate entry for dmi_system_id tables
  devicetree: bindings: uart: Add new compatible string for ZynqMP
  serial: xuartps: Add new compatible string for ZynqMP
  serial: SERIAL_STM32 should depend on HAS_DMA
  serial: stm32: Fix comparisons with undefined register
  tty: vt, fix bogus division in csi_J

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 4.9-rc3.

  There is the usual number of gadget and xhci patches in here to
  resolved reported issues, as well as some usb-serial driver fixes and
  new device ids.

  All have been in linux-next with no reported issues"

* tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: chipidea: host: fix NULL ptr dereference during shutdown
  usb: renesas_usbhs: add wait after initialization for R-Car Gen3
  usb: increase ohci watchdog delay to 275 msec
  usb: musb: Call pm_runtime from musb_gadget_queue
  usb: musb: Fix hardirq-safe hardirq-unsafe lock order error
  usb: ehci-platform: increase EHCI_MAX_RSTS to 4
  usb: ohci-at91: Set RemoteWakeupConnected bit explicitly.
  USB: serial: fix potential NULL-dereference at probe
  xhci: use default USB_RESUME_TIMEOUT when resuming ports.
  xhci: workaround for hosts missing CAS bit
  xhci: add restart quirk for Intel Wildcatpoint PCH
  USB: serial: cp210x: fix tiocmget error handling
  wusb: fix error return code in wusb_prf()
  Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"
  Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization"
  Revert "usb: dwc2: gadget: change variable name to more meaningful"
  USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7
  wusb: Stop using the stack for sg crypto scratch space
  usb: dwc3: Fix size used in dma_free_coherent()
  usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable
  ...

The recent changes, which forced the registration of the boot cpu on UP
systems, which do not have ACPI tables, have been fixed for systems w/o
local APIC, but left a wreckage for systems which have neither ACPI nor
mptables, but the CPU has an APIC, e.g. virtualbox.

The boot process crashes in prefill_possible_map() as it wants to register
the boot cpu, which needs to access the local apic, but the local APIC is
not yet mapped.

There is no reason why init_apic_mapping() can't be invoked before
prefill_possible_map(). So instead of playing another silly early mapping
game, as the ACPI/mptables code does, we just move init_apic_mapping()
before the call to prefill_possible_map().

In hindsight, I should have noticed that combination earlier.

Sorry for the churn (also in stable)!

Fixes: ff856051 ("x86/boot/smp: Don't try to poke disabled/non-existent APIC")
Reported-and-debugged-by: NMichal Necasek <michal.necasek@oracle.com>
Reported-and-tested-by: NWolfgang Bauer <wbauer@tmo.at>
Cc: prarit@redhat.com
Cc: ville.syrjala@linux.intel.com
Cc: michael.thayer@oracle.com
Cc: knut.osmundsen@oracle.com
Cc: frank.mehnert@oracle.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610282114380.5053@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Pull ACPI fixes from Rafael Wysocki:
 "These fix recent ACPICA regressions, an older PCI IRQ management
  regression, and an incorrect return value of a function in the APEI
  code.

  Specifics:

   - Fix three ACPICA issues related to the interpreter locking and
     introduced by recent changes in that area (Lv Zheng).

   - Fix a PCI IRQ management regression introduced during the 4.7 cycle
     and related to the configuration of shared IRQs on systems with an
     ISA bus (Sinan Kaya).

   - Fix up a return value of one function in the APEI code (Punit
     Agrawal)"

* tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ACPI / APEI: Fix incorrect return value of ghes_proc()
  ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
  ACPI/PCI: pci_link: penalize SCI correctly
  ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages

Pull power management fixes from Rafael Wysocki:
 "These fix two intel_pstate issues related to the way it works when the
  scaling_governor sysfs attribute is set to "performance" and fix up
  messages in the system suspend core code.

  Specifics:

   - Fix a missing KERN_CONT in a system suspend message by converting
     the affected code to using pr_info() and pr_cont() instead of the
     "raw" printk() (Jon Hunter).

   - Make intel_pstate set the CPU P-state from its .set_policy()
     callback when the scaling_governor sysfs attribute is set to
     "performance" so that it interacts with NOHZ_FULL more predictably
     which was the case before 4.7 (Rafael Wysocki).

   - Make intel_pstate always request the maximum allowed P-state when
     the scaling_governor sysfs attribute is set to "performance" to
     prevent it from effectively ingoring that setting is some
     situations (Rafael Wysocki)"

* tag 'pm-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Always set max P-state in performance mode
  PM / suspend: Fix missing KERN_CONT for suspend message
  cpufreq: intel_pstate: Set P-state upfront in performance mode

Pull ARC updates from Vineet Gupta:

 - support IDU intc for UP builds

 - support gz, lzma compressed uImage [Daniel Mentz]

 - adjust /proc/cpuinfo for non-continuous cpu ids [Noam Camus]

 - syscall for userspace cmpxchg assist for configs lacking hardware atomics

 - rework of boot log printing mainly for identifying older arc700 cores

 - retiring some old code, build toggles

* tag 'arc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ARCv2: IOC: use @ioc_enable not @ioc_exist where intended
  ARC: syscall for userspace cmpxchg assist
  ARC: fix build warning in elf.h
  ARC: Adjust cpuinfo for non-continuous cpu ids
  ARC: [build] Support gz, lzma compressed uImage
  ARCv2: intc: untangle SMP, MCIP and IDU

* acpica-fixes:
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination

* acpi-pci-fixes:
  ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
  ACPI/PCI: pci_link: penalize SCI correctly
  ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages

* acpi-apei-fixes:
  ACPI / APEI: Fix incorrect return value of ghes_proc()

In the code path of acpi_ev_initialize_region(), there is namespace
modification code unlocked. This patch tunes the code to make sure
such modification are always locked.

Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues)
Tested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There is a lock unbalanced exit path in acpi_ds_initialize_method(),
this patch corrects it.

Fixes: 441ad11d (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization)
Tested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The last step of the method termination should be the end of the method
serialization. Otherwise, the steps happening after it will face the race
issues that cannot be protected by the method serialization mechanism.

This patch fixes this issue by moving the per-method-object deletion code
prior than the end of the method serialization. Otherwise, the possible
race issues may result in AE_ALREADY_EXISTS error in a parallel
environment.

Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues)
Reported-and-tested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>