- 09 6月, 2006 16 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Manoj Naik 提交于
Respond to a moved error on NFS lookup by setting up the referral. Note: We don't actually follow the referral during lookup/getattr, but later when we detect fsid mismatch in inode revalidation (similar to the processing done for cloning submounts). Referrals will have fake attributes until they are actually followed or traversed. Signed-off-by: NManoj Naik <manoj@almaden.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Manoj Naik 提交于
Set up mountpoint when hitting a referral on moved error by getting fs_locations. Signed-off-by: NManoj Naik <manoj@almaden.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Manoj Naik 提交于
Signed-off-by: NManoj Naik <manoj@almaden.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Manoj Naik 提交于
Move existing code into a separate function so that it can be also used by referral code. Signed-off-by: NManoj Naik <manoj@almaden.ibm.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Make automounted partitions expire using the mark_mounts_for_expiry() function. The timeout is controlled via a sysctl. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This should enable us to detect if we are crossing a mountpoint in the case where the server is exporting "nohide" mounts. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Allow filesystems to decide to perform pre-umount processing whether or not MNT_FORCE is set. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Now that we have a real nfs_invalidate_page() to ensure that truncate_inode_pages() does the right thing when there are pending dirty pages, we can get rid of nfs_delete_inode(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently, we are accounting for all calls to nfs_revalidate_inode(), but not to nfs_revalidate_mapping(), or nfs_lookup_verify_inode(), etc... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Separate out the function of revalidating the inode metadata, and revalidating the mapping. The former may be called by lookup(), and only really needs to check that permissions, ctime, etc haven't changed whereas the latter needs only done when we want to read data from the page cache, and may need to sync and then invalidate the mapping. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Fix up a bug in the handling of NFS_INO_REVAL_PAGECACHE: make sure that nfs_update_inode() clears it when we're sure we're not racing with other updates. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The Linux NFSv4 server violates RFC3530 in that the change attribute is not guaranteed to be updated for every change to the inode. Our optimisation for checking whether or not the inode metadata has changed or not is broken too. Grr.... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 4月, 2006 1 次提交
-
-
由 John Hawkes 提交于
Convert a for-loop that explicitly references "NR_CPUS" into the potentially more efficient for_each_possible_cpu() construct. Signed-off-by: NJohn Hawkes <hawkes@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 3月, 2006 4 次提交
-
-
由 Paul Jackson 提交于
Rewrap the overly long source code lines resulting from the previous patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch contains only formatting changes, and no function change. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD memory spreading. If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's in a cpuset with the 'memory_spread_slab' option enabled goes to allocate from such a slab cache, the allocations are spread evenly over all the memory nodes (task->mems_allowed) allowed to that task, instead of favoring allocation on the node local to the current cpu. The following inode and similar caches are marked SLAB_MEM_SPREAD: file cache ==== ===== fs/adfs/super.c adfs_inode_cache fs/affs/super.c affs_inode_cache fs/befs/linuxvfs.c befs_inode_cache fs/bfs/inode.c bfs_inode_cache fs/block_dev.c bdev_cache fs/cifs/cifsfs.c cifs_inode_cache fs/coda/inode.c coda_inode_cache fs/dquot.c dquot fs/efs/super.c efs_inode_cache fs/ext2/super.c ext2_inode_cache fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr fs/ext3/super.c ext3_inode_cache fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr fs/fat/cache.c fat_cache fs/fat/inode.c fat_inode_cache fs/freevxfs/vxfs_super.c vxfs_inode fs/hpfs/super.c hpfs_inode_cache fs/isofs/inode.c isofs_inode_cache fs/jffs/inode-v23.c jffs_fm fs/jffs2/super.c jffs2_i fs/jfs/super.c jfs_ip fs/minix/inode.c minix_inode_cache fs/ncpfs/inode.c ncp_inode_cache fs/nfs/direct.c nfs_direct_cache fs/nfs/inode.c nfs_inode_cache fs/ntfs/super.c ntfs_big_inode_cache_name fs/ntfs/super.c ntfs_inode_cache fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache fs/ocfs2/super.c ocfs2_inode_cache fs/proc/inode.c proc_inode_cache fs/qnx4/inode.c qnx4_inode_cache fs/reiserfs/super.c reiser_inode_cache fs/romfs/inode.c romfs_inode_cache fs/smbfs/inode.c smb_inode_cache fs/sysv/inode.c sysv_inode_cache fs/udf/super.c udf_inode_cache fs/ufs/super.c ufs_inode_cache net/socket.c sock_inode_cache net/sunrpc/rpc_pipe.c rpc_inode_cache The choice of which slab caches to so mark was quite simple. I marked those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache, inode_cache, and buffer_head, which were marked in a previous patch. Even though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same potentially large file system i/o related slab caches as we need for memory spreading. Given that the rule now becomes "wherever you would have used a SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain. Future file system writers will just copy one of the existing file system slab cache setups and tend to get it right without thinking. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tobias Klauser 提交于
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a duplicate of ARRAY_SIZE. Some trailing whitespaces are also deleted. Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch> Cc: David Howells <dhowells@redhat.com> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Theodore Ts'o 提交于
The meaning of MS_VERBOSE is backwards; if the bit is set, it really means, "don't be verbose". This is confusing and counter-intuitive. In addition, there is also no way to set the MS_VERBOSE flag in the mount(8) program in util-linux, but interesting, it does define options which would do the right thing if MS_SILENT were defined, which unfortunately we do not: #ifdef MS_SILENT { "quiet", 0, 0, MS_SILENT }, /* be quiet */ { "loud", 0, 1, MS_SILENT }, /* print out messages. */ #endif So the obvious fix is to deprecate the use of MS_VERBOSE and replace it with MS_SILENT. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 3月, 2006 15 次提交
-
-
由 Trond Myklebust 提交于
Kudos to Neil Brown for spotting the problem: "in nfs_sync_inode, there is effectively the sequence: nfs_wait_on_requests nfs_flush_inode nfs_commit_inode This seems a bit racy to me as if the only requests are on the ->commit list, and nfs_commit_inode is called separately after nfs_wait_on_requests completes, and before nfs_commit_inode start (say: by nfs_write_inode) then none of these function will return >0, yet there will be some pending request that aren't waited for." The solution is to search for requests to wait upon, search for dirty requests, and search for uncommitted requests while holding the nfsi->req_lock The patch also cleans up nfs_sync_inode(), getting rid of the redundant FLUSH_WAIT flag. It turns out that we were always setting it. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently it returns NULL, which usually gets interpreted as ENOMEM. In fact it can mean a host of issues. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The mount statistics patches introduced a call to nfs_free_iostats that is not only redundant, but actually causes an oops. Also fix a memory leak due to the lack of a call to nfs_free_iostats on unmount. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
NFS client now shows various RPC I/O metrics in /proc/self/mountstats. Test plan: Mount/umount while doing "cat /proc/self/mountstats", multiple iterations of connectathon locking suite. Test with NFS version 2, 3, and 4. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a field in nfs_server to record a timestamp when a mount succeeds. Report the number of seconds the file system has been mounted via nfs_show_stats(). Test plan: Mount an NFS file system, watch the mountstats reports and compare with clock time. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Invoke the byte and event counter macros where we want to count bytes and events. Clean-up: fix a possible NULL dereference in nfs_lock, and simplify nfs_file_open. Test-plan: fsx and iozone on UP and SMP systems, with and without pre-emption. Watch for memory overwrite bugs, and performance loss (significantly more CPU required per op). Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a per-superblock performance counter facility to the NFS client. This facility mimics the counters available for block devices and for networking. Expose these new counters via the new /proc/self/mountstats interface. Thanks to Andrew Morton and Trond Myklebust for their review and comments. Test plan: fsx and iozone on UP and SMP systems, with and without pre-emption. Watch for memory overwrite bugs, and performance loss (significantly more CPU required per op). Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Get rid of "lock" and "posix", and spell out "vers=". Test plan: None. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Sometimes it's important to know the exact RPC retransmit settings the kernel is using for an NFS mount point. Add this facility to the NFS client's show_options method. Test plan: Set various retransmit settings via the mount command, and check that the settings are reflected in /proc/mounts. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Eric Sesterhenn 提交于
this converts fs/nfs to kzalloc() usage. compile tested with make allyesconfig Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The reason is that the idmapper cleanup may call flush_workqueue() on rpciod_workqueue. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we flush out writes in the case when someone calls utimes() in order to set the file times. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The nfs_open_context may live longer than the file descriptor that spawned it, so it needs to carry a reference to the vfsmount. If not, then generic_shutdown_super() may end up being called before reads and writes have been flushed out. Make a couple of functions static while we're at it... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 1月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
Turn noatime and nodiratime into per-mount instead of per-sb flags. After all the preparations this is a rather trivial patch. The mount code needs to treat the two options as per-mount instead of per-superblock, and touch_atime needs to be changed to check the new MNT_ flags in addition to the MS_ flags that are kept for filesystems that are always noatime/nodiratime but not user settable anymore. Besides that core code only nfs needed an update because it's leaving atime updates to the server and thus sets the S_NOATIME flag on every inode, but needs to know whether it's a real noatime mount for an getattr optimization. While we're at it I've killed the IS_NOATIME/IS_NODIRATIME macros that were only used by touch_atime. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2006 1 次提交
-
-
由 OGAWA Hirofumi 提交于
This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it. See mm/filemap.c: And changes the filemap_write_and_wait() and filemap_write_and_wait_range(). Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite() returns error. However, even if filemap_fdatawrite() returned an error, it may have submitted the partially data pages to the device. (e.g. in the case of -ENOSPC) <quotation> Andrew Morton writes, If filemap_fdatawrite() returns an error, this might be due to some I/O problem: dead disk, unplugged cable, etc. Given the generally crappy quality of the kernel's handling of such exceptions, there's a good chance that the filemap_fdatawait() will get stuck in D state forever. </quotation> So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO. Trond, could you please review the nfs part? Especially I'm not sure, nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not. Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 1月, 2006 2 次提交
-
-
由 Trond Myklebust 提交于
If someone changes the uid/gid mapping in userland, then we do eventually want those changes to be propagated to the kernel. Currently the kernel assumes that it may cache entries forever. Add an expiration time + garbage collector for idmap entries. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Every ULP that uses the in-kernel RPC client, except the NLM client, sets cl_chatty. There's no reason why NLM shouldn't set it, so just get rid of cl_chatty and always be verbose. Test-plan: Compile with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-