Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Include code to prep ssp frame and deliver to hardware.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Also include slot_complete_v2_hw handler
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This also includes broadcast handler. Unlike v1 hw, broadcast does not
have its own dedicated interrupt.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add code to initialise the hardware.

Support is also added to deal with the "am-max-transmissions" (amt)
limitation in hip06 controller #1. This is how many connection requests
we can send on the system bus before waiting for a response.  Due to
chip bus design, controller #1 is limited to 32 amt, while, by design, a
controller supports 64.  The default value for the nibbles in the
relevant registers is 0x40; these need to be programmed with 0x20.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Just add enough to build and init the module.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since hisi_sas_itct format is different between v1 and v2 hw, give more
general names for some fields.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the error record structure is different for v2 hw, make
hisi_sas_err_record opaque and add hisi_sas_err_record_v1.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since v2 hw only supports 2048 itct entries, as opposed to 4096 for v1
hw, set the max itct entries to the lower of the two.

It is not anticipated that any device with v1 will ever require to
connect > 2048 devices.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since v2 hardware permits different numbers of commands to v1, set this
as configurable in hisi_sas_hw.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Relocate DEV_IS_EXPANDER to hisi_sas.h as it will be required for v2 hw
support.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Completion header bit CMPLT_HDR_RSPNS_XFRD flags whether the response
frame is received into host memory, and not whether the response frame
has an error.  As such, change the decision on whether a slot has an
error.  Also redundant check on CMPLT_HDR_CMD_CMPLT_MSK is removed.

Fixes: 27a3f229 ("hisi_sas: Add cq interrupt handler")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Tested-by: NRicardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Not every arch has io, so fix build by adding necessary dependency.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Suggested-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The HiSilicon SAS HBA is available in HiSilicon arm64 SoCs only.
Restrict it to arm64, unless compile-testing.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If NO_DMA=y:

    ERROR: "dma_map_sg" [drivers/scsi/hisi_sas/hisi_sas_v1_hw.ko] undefined!
    ERROR: "dma_pool_alloc" [drivers/scsi/hisi_sas/hisi_sas_v1_hw.ko] undefined!
    ERROR: "dma_unmap_sg" [drivers/scsi/hisi_sas/hisi_sas_v1_hw.ko] undefined!
    ERROR: "dma_unmap_sg" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_set_mask" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_map_sg" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_pool_destroy" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_free_coherent" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_pool_free" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_alloc_coherent" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_pool_alloc" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_supported" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!
    ERROR: "dma_pool_create" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined!

Add a dependency on HAS_DMA to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

By reading in itct.qw0 into a 32b variable the top 32 bits were being
lost.  In practice this was OK as they were zeroes.

Fixes: 27a3f229 ("hisi_sas: Add cq interrupt")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: NShane Seymour <shane.seymour@hpe.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We were doing a arithmetic comparison instead of logical shift by
accident.  Mis-programming the itct did not seem to make a difference to
operation.

Fixes: abda97c2 ("hisi_sas: Add dev_found")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: NShane Seymour <shane.seymour@hpe.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The mask fields are for quad-words, so add ULL suffix.  Also
unreferenced ITCT_HDR_BREAK_REPLY and ITCT_HDR_MAX_BURST are removed.

Fixes: 50af155b ("hisi_sas: Add v1 hardware reg")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NShane Seymour <shane.seymour@hpe.com>
Reviewed-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

It is preferred that drivers use platform_get_irq() instead of
irq_of_parse_and_map(), so replace.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

There were a couple cases where the error codes weren't set and also I
changed the success return to "return 0;" which is the same as
"return rc;" but more explicit.

Fixes: 42e7a693 ('hisi_sas: Add ssp command functio')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Tested-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Originally the driver would use of_irq_count to calculate how much
memory is required for storing the interrupt names, since the number of
interrupt sources for the controller is variable.  Since of_irq_count
cannot be used by the driver, use fixed names.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add handlers for fatal interrupts.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add method for lldd_control_phy. Currently link rate control and spinup
hold is unsupported.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add function methods for tmf's.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add functions for scsi host template scan_finished and scan_start
methods.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add support for smp function, which allows devices attached by expander
to be controlled.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This is for expander broadcast event.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add abnormal irq handler. This handler is concerned with phy down event.
Also add port formed and port deformed handlers.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add functions to deal with lldd_dev_found and lldd_dev_gone.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add cq interrupt handler and also slot error handler function.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add path to send ssp command to HW.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Add code to interrupts, so now we can get a phy up interrupt when a disk
is connected.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>