- 11 11月, 2017 10 次提交
-
-
由 Mikulas Patocka 提交于
The structure srcu_struct can be very big, its size is proportional to the value CONFIG_NR_CPUS. The Fedora kernel has CONFIG_NR_CPUS 8192, the field io_barrier in the struct mapped_device has 84kB in the debugging kernel and 50kB in the non-debugging kernel. The large size may result in failure of the function kzalloc_node. In order to avoid the allocation failure, we use the function kvzalloc_node, this function falls back to vmalloc if a large contiguous chunk of memory is not available. This patch also moves the field io_barrier to the last position of struct mapped_device - the reason is that on many processor architectures, short memory offsets result in smaller code than long memory offsets - on x86-64 it reduces code size by 320 bytes. Note to stable kernel maintainers - the kernels 4.11 and older don't have the function kvzalloc_node, you can use the function vzalloc_node instead. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Damien Le Moal 提交于
The SCSI layer allows ZBC drives to have a smaller last runt zone. For such a device, specifying the entire capacity for a dm-zoned target table entry fails because the specified capacity is not aligned on a device zone size indicated in the request queue structure of the device. Fix this problem by ignoring the last runt zone in the entry length when seting up the dm-zoned target (ctr method) and when iterating table entries of the target (iterate_devices method). This allows dm-zoned users to still easily setup a target using the entire device capacity (as mandated by dm-zoned) or the aligned capacity excluding the last runt zone. While at it, replace direct references to the device queue chunk_sectors limit with calls to the accessor blk_queue_zone_sectors(). Reported-by: NPeter Desnoyers <pjd@ccs.neu.edu> Cc: stable@vger.kernel.org Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Jérémy Lefaure 提交于
Using the ARRAY_SIZE macro improves the readability of the code. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Signed-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Ross Zwisler 提交于
Now that we have the ability log filesystem writes using a flat buffer, add support for DAX. The motivation for this support is the need for an xfstest that can test the new MAP_SYNC DAX flag. By logging the filesystem activity with dm-log-writes we can show that the MAP_SYNC page faults are writing out their metadata as they happen, instead of requiring an explicit msync/fsync. Unfortunately we can't easily track data that has been written via mmap() now that the dax_flush() abstraction was removed by commit c3ca015f ("dax: remove the pmem_dax_ops->flush abstraction"). Otherwise we could just treat each flush as a big write, and store the data that is being synced to media. It may be worthwhile to add the dax_flush() entry point back, just as a notifier so we can do this logging. Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Ross Zwisler 提交于
Currently dm-log-writes supports writing filesystem data via BIOs, and writing internal metadata from a flat buffer via write_metadata(). For DAX writes, though, we won't have a BIO, but will instead have an iterator that we'll want to use to fill a flat data buffer. So, create write_inline_data() which allows us to write filesystem data using a flat buffer as a source, and wire it up in log_one_block(). Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
There is only one per_bio_data size now that writethrough-specific data was removed from the per_bio_data structure. Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
Now that the writethrough code is much simpler there is no need to track so much state or cascade bio submission (as was done, via writethrough_endio(), to issue origin then cache IO in series). As such the obsolete writethrough list and workqueue is also removed. Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
Discontinue issuing writethrough write IO in series to the origin and then cache. Use bio_clone_fast() to create a new origin clone bio that will be mapped to the origin device and then bio_chain() it to the bio that gets remapped to the cache device. The origin clone bio does _not_ have a copy of the per_bio_data -- as such check_if_tick_bio_needed() will not be called. The cache bio (parent bio) will not complete until the origin bio has completed -- this fulfills bio_clone_fast()'s requirements as well as the requirement to not complete the original IO until the write IO has completed to both the origin and cache device. Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
No functional changes, just a bit cleaner than passing cache_features structure. Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Joe Thornber 提交于
When a DM cache in writeback mode moves data between the slow and fast device it can often avoid a copy if the triggering bio either: i) covers the whole block (no point copying if we're about to overwrite it) ii) the migration is a promotion and the origin block is currently discarded Prior to this fix there was a race with case (ii). The discard status was checked with a shared lock held (rather than exclusive). This meant another bio could run in parallel and write data to the origin, removing the discard state. After the promotion the parallel write would have been lost. With this fix the discard status is re-checked once the exclusive lock has been aquired. If the block is no longer discarded it falls back to the slower full copy path. Fixes: b29d4986 ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
- 25 10月, 2017 3 次提交
-
-
由 Elena Reshetova 提交于
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable dm_cache_metadata.ref_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: NKees Cook <keescook@chromium.org> Reviewed-by: NDavid Windsor <dwindsor@gmail.com> Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Elena Reshetova 提交于
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable table_device.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: NKees Cook <keescook@chromium.org> Reviewed-by: NDavid Windsor <dwindsor@gmail.com> Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Elena Reshetova 提交于
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable dm_dev_internal.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: NKees Cook <keescook@chromium.org> Reviewed-by: NDavid Windsor <dwindsor@gmail.com> Reviewed-by: NHans Liljestrand <ishkamiel@gmail.com> Signed-off-by: NElena Reshetova <elena.reshetova@intel.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
- 23 10月, 2017 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO fixes from Greg KH: "Here are a small number of patches to resolve some reported IIO and a staging driver problem. Nothing major here, full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: bcm2835-audio: Fix memory corruption iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property iio: adc: dln2-adc: fix build error iio: dummy: events: Add missing break staging: iio: ade7759: fix signed extension bug on shift of a u8 iio: pressure: zpa2326: Remove always-true check which confuses gcc iio: proximity: as3935: noise detection + threshold changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are four small fixes for 4.14-rc6. Three of them are binder driver fixes for reported issues, and the last one is a hyperv driver bugfix. Nothing major, but good fixes to get into 4.14-final. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: android: binder: Fix null ptr dereference in debug msg android: binder: Don't get mm from task vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister() binder: call poll_wait() unconditionally.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB/PHY fixes from Greg KH: "Here are a small number of USB and PHY driver fixes for 4.14-rc6 There is the usual musb and xhci fixes in here, as well as some needed phy patches. Also is a nasty regression fix for usbfs that has started to hit a lot of people using virtual machines. All of these have been in linux-next with no reported problems" * tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: hub: Allow reset retry for USB2 devices on connect bounce USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() MAINTAINERS: fix git tree url for musb module usb: quirks: add quirk for WORLDE MINI MIDI keyboard usb: musb: sunxi: Explicitly release USB PHY on exit usb: musb: Check for host-mode using is_host_active() on reset interrupt usb: musb: musb_cppi41: Configure the number of channels for DA8xx usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers USB: musb: fix late external abort on suspend USB: musb: fix session-bit runtime-PM quirk usb: cdc_acm: Add quirk for Elatec TWN3 USB: devio: Revert "USB: devio: Don't corrupt user memory" usb: xhci: Handle error condition in xhci_stop_device() usb: xhci: Reset halted endpoint if trb is noop xhci: Cleanup current_cmd in xhci_cleanup_command_queue() xhci: Identify USB 3.1 capable hosts by their port protocol capability USB: serial: metro-usb: add MS7820 device id phy: rockchip-typec: Check for errors from tcphy_phy_init() phy: rockchip-typec: Don't set the aux voltage swing to 400 mV ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fix from Dmitry Torokhov: "A fix for a broken commit in the previous pull breaking automatic module loading of input handlers, such ad evdev" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: do not use property bits when generating module alias
-
由 Dmitry Torokhov 提交于
The commit 8724ecb0 ("Input: allow matching device IDs on property bits") started using property bits when generating module aliases for input handlers, but did not adjust the generation of MODALIAS attribute on input device uevents, breaking automatic module loading. Given that no handler currently uses property bits in their module tables, let's revert this part of the commit for now. Reported-by: NDamien Wyart <damien.wyart@gmail.com> Tested-by: NDamien Wyart <damien.wyart@gmail.com> Fixes: 8724ecb0 ("Input: allow matching device IDs on property bits") Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 22 10月, 2017 21 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A couple of fixes addressing the following issues: - The last polishing for the TLB code, removing the last BUG_ON() and the debug file along with tidying up the lazy TLB code. - Prevent triple fault on 1st Gen. 486 caused by stupidly calling the early IDT setup after the first function which causes a fault which should be caught by the exception table. - Limit the mmap of /dev/mem to valid addresses - Prevent late microcode loading on Broadwell X - Remove a redundant assignment in the cache info code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode" x86/mm/64: Remove the last VM_BUG_ON() from the TLB code x86/microcode/intel: Disable late loading on model 79 x86/idt: Initialize early IDT before cr4_init_shadow() x86/cpu/intel_cacheinfo: Remove redundant assignment to 'this_leaf'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Thomas Gleixner: "A single fix to make the cs5535 clock event driver robust agaist spurious interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents/drivers/cs5535: Improve resilience to spurious interrupts
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull smp/hotplug fix from Thomas Gleixner: "The recent rework of the callback invocation missed to cleanup the leftovers of the operation, so under certain circumstances a subsequent CPU hotplug operation accesses stale data and crashes. Clean it up." * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Reset node state after operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Thomas Gleixner: "A series of fixes for perf tooling: - Make xyarray return the X/Y size correctly which fixes a crash in the exit code. - Fix the libc path in test so it works not only on Debian/Ubuntu correctly - Check for eBPF file existance and output a useful error message instead of failing to compile a non existant file - Make sure perf_hpp_fmt is not longer references before freeing it - Use list_del_init() in the histogram code to prevent a crash when the already deleted element is deleted again - Remove the leftovers of the removed '-l' option - Add reviewer entries to the MAINTAINERS file" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu perf xyarray: Fix wrong processing when closing evsel fd perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE perf record: Fix documentation for a inexistent option '-l' perf tools: Add long time reviewers to MAINTAINERS perf tools: Check wether the eBPF file exists in event parsing perf hists: Add extra integrity checks to fmt_free() perf hists: Fix crash in perf_hpp__reset_output_field()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Thomas Gleixner: "A set of small fixes mostly in the irq drivers area: - Make the tango irq chip work correctly, which requires a new function in the generiq irq chip implementation - A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON() and parsing the VCPU table size correctly" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack() irqchip/tango: Use irq_gc_mask_disable_and_ack_set genirq: generic chip: Add irq_gc_mask_disable_and_ack_set() irqchip/gic-v3-its: Add missing changes to support 52bit physical address irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain() DT: arm,gic-v3: Update the ITS size in the examples
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull objtool fix from Thomas Gleixner: "Plug a memory leak in the instruction decoder" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix memory leak in decode_instructions()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
-
由 Bernd Edlinger 提交于
This is the possible reason for different hard to reproduce problems on my ARMv7-SMP test system. The symptoms are in recent kernels imprecise external aborts, and in older kernels various kinds of network stalls and unexpected page allocation failures. My testing indicates that the trouble started between v4.5 and v4.6 and prevails up to v4.14. Using the dirty_tx before acquiring the spin lock is clearly wrong and was first introduced with v4.6. Fixes: e3ad57c9 ("stmmac: review RX/TX ring management") Signed-off-by: NBernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When syzkaller team brought us a C repro for the crash [1] that had been reported many times in the past, I finally could find the root cause. If FlowLabel info is merged by fl6_merge_options(), we leave part of the opt_space storage provided by udp/raw/l2tp with random value in opt_space.tot_len, unless a control message was provided at sendmsg() time. Then ip6_setup_cork() would use this random value to perform a kzalloc() call. Undefined behavior and crashes. Fix is to properly set tot_len in fl6_merge_options() At the same time, we can also avoid consuming memory and cpu cycles to clear it, if every option is copied via a kmemdup(). This is the change in ip6_setup_cork(). [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cb64a100 task.stack: ffff8801cc350000 RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: 0018:ffff8801cc357550 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010 RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014 RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10 R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0 R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0 FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0 DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x358/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4520a9 RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9 RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016 RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029 Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550 Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Randy Dunlap 提交于
Fix spellos (typos) in textsearch library helpers. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Don't release call mutex at the end of rxrpc_kernel_begin_call() if the call pointer actually holds an error value. Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jose Abreu says: ==================== net: stmmac: Fix HW timestamping Three fixes for HW timestamping feature, all of them for RX side. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Prevent infinite loop by correctly setting the loop condition to break when i == 10. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
When using GMAC4 the valid timestamp is from CTX next desc but we are passing the previous desc to get_rx_timestamp_status() callback. Fix this and while at it rework a little bit the function logic. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
When RX HW timestamp is enabled and a frame is discarded we are not freeing the skb but instead only setting to NULL the entry. Add a call to dev_kfree_skb_any() so that skb entry is correctly freed. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "MS_I_VERSION fixes - Mimi's fix + missing bits picked from Matthew (his patch contained a duplicate of the fs/namespace.c fix as well, but by that point the original fix had already been applied)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Convert fs/*/* to SB_I_VERSION vfs: fix mounting a filesystem with i_version
-
由 David S. Miller 提交于
Jiri Pirko says: ==================== mlxsw: spectrum: Configure TTL of "inherit" for offloaded tunnels Petr says: Currently mlxsw only offloads tunnels that are configured with TTL of "inherit" (which is the default). However, Spectrum defaults to 255 and the driver neglects to change the configuration. Thus the tunnel packets from offloaded tunnels always have TTL of 255, even though tunnels with explicit TTL of 255 are never actually offloaded. To fix this, introduce support for TIGCR, the register that keeps the related bits of global tunnel configuration, and use it on first offload to properly configure inheritance of TTL of tunnel packets from overlay packets. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Spectrum tunnels do not default to ttl of "inherit" like the Linux ones do. Configure TIGCR on router init so that the TTL of tunnel packets is copied from the overlay packets. Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
The TIGCR register is used for setting up the IPinIP Tunnel configuration. Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-