- 29 9月, 2006 40 次提交
-
-
由 Patrick McHardy 提交于
The move of qdisc destruction to a rcu callback broke locking in the entire qdisc layer by invalidating previously valid assumptions about the context in which changes to the qdisc tree occur. The two assumptions were: - since changes only happen in process context, read_lock doesn't need bottem half protection. Now invalid since destruction of inner qdiscs, classifiers, actions and estimators happens in the RCU callback unless they're manually deleted, resulting in dead-locks when read_lock in process context is interrupted by write_lock_bh in bottem half context. - since changes only happen under the RTNL, no additional locking is necessary for data not used during packet processing (f.e. u32_list). Again, since destruction now happens in the RCU callback, this assumption is not valid anymore, causing races while using this data, which can result in corruption or use-after-free. Instead of "fixing" this by disabling bottem halfs everywhere and adding new locks/refcounting, this patch makes these assumptions valid again by moving destruction back to process context. Since only the dev->qdisc pointer is protected by RCU, but ->enqueue and the qdisc tree are still protected by dev->qdisc_lock, destruction of the tree can be performed immediately and only the final free needs to happen in the rcu callback to make sure dev_queue_xmit doesn't access already freed memory. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Fix incorrect use of RB_EMPTY_NODE in htb_safe_rb_erase, which makes it skip nodes within the rbtree instead of nodes not in the tree, resulting in crashes later on. The root cause for this seems to be the very counter-intuitive behaviour of the RB_EMPTY_NODE macro, which returns _false_ when the node is empty. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olaf Kirch 提交于
This is just a minor buglet I came across by accident - when inet_init fails to register raw_prot, it jumps to out_unregister_udp_proto which should unregister UDP _and_ TCP. Signed-off-by: NOlaf Kirch <okir@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Francesco Fondelli 提交于
Signed-off-by: NFrancesco Fondelli <francesco.fondelli@gmail.com> Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Francesco Fondelli 提交于
Anyway, I've been asked to add support for managing DSCP codepoints, so one can test DiffServ capable routers. It's very simple code and is working for me. Signed-off-by: NFrancesco Fondelli <francesco.fondelli@gmail.com> Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Francesco Fondelli 提交于
The attached patch allows pktgen to produce 802.1Q and Q-in-Q tagged frames. I have used it for stress test a bridge and seems ok to me. Unfortunately I have no access to net-2.6.x git tree so the diff is against 2.6.17.13. Signed-off-by: NFrancesco Fondelli <francesco.fondelli@gmail.com> Acked-by: NSteven Whitehouse <steve@chygwyn.com> Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kim Nordlund 提交于
Prevents filters from being added if the first generated handle already exists. Signed-off-by: NKim Nordlund <kim.nordlund@nokia.com> Signed-off-by: NThomas Graf <tgraf@suug.ch>
-
由 Michal Ostrowski 提交于
PPPoE must advertise the underlying device's MTU via the ppp channel descriptor structure, as multilink functionality depends on it. Signed-off-by: NMichal Ostrowski <mostrows@earthlink.net> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.66. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add support for the 5709 10/100 PHY. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add support for the new 5709 device. This is a new 10/100 Mbps chip. The mailbox access and firmware interface are quite different from all other tg3 chips. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Put the firmware polling logic into a separate function. This makes the code cleaner. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add IDs to support 5722 and 5756. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some PHY related fixes: 1. Fix Serdes WoL. 2. Fix loopback test on 10/100 only devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Change to a different ASF heartbeat message code to improve reliability. There were some reports of unintended resets on real time kernels where the timer may be slow and cause the heartbeat to be late. Netpoll will also have the same problem because the timer irq will be unavailable. Using the new heartbeat code, the ASF firmware will also check the ring condition before resetting the chip when the heartbeat is expiring. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Improve 5704S autoneg logic by using a serdes_counter field to keep track of the transient states. This eliminates a 200 msec busy loop in the code. Autoneg will take its course without the driver busy waiting for it to finish. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
In case of non-blocking connects it is possible that the last user of an ACL link quits before the connection has been fully established. This will lead to a race condition where the internal state of a connection is closed, but the actual link has been established and is active. In case of Bluetooth 1.2 and later devices it is possible to call create connection cancel to abort the connect. For older devices the disconnect timer will be used to trigger the needed disconnect. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
In case of non-blocking socket calls we should return EINPROGRESS and not EAGAIN. Signed-off-by: NUlisses Furquim <ulissesf@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch cleans up the Bluetooth HCI UART driver a bit. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch adds the vendor and product id of the Canycon CN-BTU1 dongle and sets a flag to send HCI_Reset as the first command. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The command complete event of the exit periodic inquiry command must clear the HCI_INQUIRY flag and finish the HCI request. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch assigns the next free HCI device identifier to Bluetooth devices based on the SDIO interface. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch is an attempt to cleanup the drivers source code to make all Bluetooth drivers look more unique. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch integrates the services of the Bluetooth protocols RFCOMM, BNEP and HIDP into the driver model. This makes it possible to assign the virtual TTY, network and input devices to a specific Bluetooth connection. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch integrates the low-level connections (ACL and SCO) into the driver model. Every connection is presented as device with the parent set to its host controller device. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch removes the unused device attribute entries for the Bluetooth host controllers. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Eric Sesterhenn 提交于
another possible dereference spotted by coverity (#cid 1390). if the nlmsg_parse() call fails, we goto errout, where we call dev_put(), with dev still initialized to NULL. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
pure s/u32/__be32/ [AV: large part based on Alexey's patches] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
* add svc_getnl(): Take network-endian value from buffer, convert to host-endian and return it. * add svc_putnl(): Take host-endian value, convert to network-endian and put it into a buffer. * annotate svc_getu32()/svc_putu32() as dealing with network-endian. * convert to svc_getnl(), svc_putnl(). [AV: in large part it's a carved-up Alexey's patch] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
saddr and daddr are net-endian Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
daddr is net-endian Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
multipath_wrandom.c::__multipath_lookup_weight() contains open-coded attempt at inet_make_mask(); broken on big-endian. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
multipath_set_nhinfo() (and underlying callback) take net-endian network and netmask. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
... and works only on little-endian Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
'mask' and 'zone' arguments are net-endian Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-