Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

While this is not the standard color bar behaviour, having some movement
there allows to check if buffers are being properly handled.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Release code should happen before the cleaning of map variable.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Thanks to Michael Krufky for pointing this to me.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Due to the replace of videobuf_read_one to videobuf_read_stream, poll()
method implementation is wrong. This fixes poll() implementation, making
read of /dev/video? to work again.

With this method, an USB driver can use video-buf, without needing to
request memory from the DMA-safe area.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

This patch removes the usage of videobuf-dma-sg from vivi driver, using
instead videobuf-vmalloc. This way, vivi will be useful for testing the
newer method. Reverting this patch won't hurt vivi, since both methods
work fine.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adds a newer videobuf-vmalloc module. This module uses the same
videobuf controls, but implements memory allocation based on vmalloc
methods.

With this method, an USB driver can use video-buf, without needing to
request memory from the DMA-safe area.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

video-buf currently does two different tasks:

- Manages video buffers with a common code that allows
  implementing all the V4L2 different modes of buffering;

- Controls memory allocations

While the first task is generic, the second were written to support PCI DMA
Scatter/Gather needs. The original approach can't even work for those
video capture hardware that don't support scatter/gather.

I did one approach to make it more generic. While the approach worked
fine for vivi driver, it were not generic enough to handle USB needs.

This patch creates two different modules, one containing the generic
video buffer handling (videobuf-core) and another with PCI DMA S/G.
After this patch, it would be simpler to write an USB video-buf and a
non-SG DMA module.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981Reviewed-by: NRicardo Cerqueira <v4l@cerqueira.org>

coding-style repairs
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c
Signed-off-by: NSascha Sommer <saschasommer@freenet.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

IR workqueue should be disabled during suspend. This avoids some troubles, like
the one reported on bug #8689:

"The Hauppauge HVR 1100 ir-remote control does not work after resume from
suspend to ram or disk."

This patch disables IR before suspending, re-enabling it after resume.

Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with
the fix.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: NPeter Poklop <Peter.Poklop@gmx.at>

Redoes the way the control word is stored and set.
The existing code was a lot more complicated than it needed to be.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Reviewed-by: NPekka Seppänen <pexu@kapsi.fi>

Frequency calculation to use better math.  It's still the same
IF offset and step size (which are not the same as the datasheet says) as
the code was before.  It's just more efficient and accurate.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Reviewed-by: NPekka Seppänen <pexu@kapsi.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Code cleanup for GemTek Radio card driver. Removed unnecessary / invalid
I/O commands and rewrote code for tuning on-board BU2614FS chip. Adds
several new module params for power users. Includes automatic device
probing.
Signed-off-by: NPekka Seppanen <pexu@kapsi.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Reviewed-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Details now match with radio-gemtek.c, eg. no more different ports.
Included a short note about cards that should be compatible with
radio-gemtek module.
Signed-off-by: NPekka Seppanen <pexu@kapsi.fi>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Reviewed-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

s/driver/drives/1
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fixes use of parport_write_control() to match the newer interface that
requires explicit parport_data_reverse() and parport_data_forward() calls.
This eliminates the following error message and restores the original
intended behavior:

parport0 (bw-qcam): use data_reverse for this!

Also increases threshold in qc_detect() from 300 to 400, as my camera often
results in a count of approx 330.  Added a kernel error message to indicate
detection failure.

Thanks Ray and Randy for your comments, and for pointing out that I
needed to reset the port to forward mode!
Signed-off-by: NBrett T. Warden <brett.warden@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pwc driver is defficient in locking, which can trigger an oops
when disconnecting.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
CC: Luc Saillard <luc@saillard.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

By default, we allocate DMA buffers when actually reading from the video
capture device.  On a system with 128MB or 256MB of ram, it's very easy
for that memory to quickly become fragmented.  We've had users report
having 30+MB of memory free, but the cafe_ccic driver is still unable to
allocate DMA buffers.

Our workaround has been to make use of the 'alloc_bufs_at_load' parameter
to allocate DMA buffers during device probing.  This patch makes DMA
buffer allocation happen during device probe by default, and changes
the parameter to 'alloc_bufs_at_read'.  The camera hardware is there,
if the cafe_ccic driver is enabled/loaded it should do its best to ensure
that the camera is actually usable; delaying DMA buffer allocation
saves an insignicant amount of memory, and causes the driver to be much
less useful.
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The name of the pll will be shown if forced via insmod option,
or if debug is enabled.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add a module option to force the dvb-pll module to use an alternate dvb-pll
description without having to recompile the kernel.

Having a module option like this is useful in some cases, where the vendor
may release an alternate revision of the hardware using a different tuner,
but without changing the pci subsystem / usb device ids.

This option is intended for debugging purposes _only_.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Increased DVB_PLL_MAX from 16 to a figure that would never be reached in a
practical sense.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add a module option to dvb-pll, called "input" to specify which rf
input to use on devices with multiple rf inputs.  If the module option
is not specified, then the driver will autoselect the rf input, as per
previous behavior.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Store an instance ID in the dvb_pll_priv structure, so that module options
specific to a given pll may be used by the functions within the driver.

When debug is turned on, print a message indicating which pll was attached
and it's instance id.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pll-specific set() function will need access to the dvb_pll_priv
structure for new functionality.  This patch gives access to this
structure to the required functions.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

AverTV Studio 307 has only one composite input.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Acked-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the following dependency issue:

ERROR: "dvb_dmx_init" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_unregister_adapter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_register_frontend" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_unregister_frontend" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_net_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_frontend_detach" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmxdev_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmx_swfilter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_net_init" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmx_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_register_adapter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmxdev_init" [drivers/media/video/video-buf-dvb.ko] undefined!

ERROR: "mt2131_attach" [drivers/media/video/cx23885/cx23885.ko] undefined!
ERROR: "s5h1409_attach" [drivers/media/video/cx23885/cx23885.ko] undefined!
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

VIDEO_CX23885 must select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

DVB-S TT 1500 must use the TT keymap.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

vidioc_int_g_ifparm returns platform-specific information about the
interface settings used by the sensor. Support for [gs]_ext_clk has
been removed.

Fix indentation and remove useless & characters.

Remove experiment for typechecking slave callback function arguments.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Remove support for g_ext_clk and s_ext_clk. The same functionality is
now handled by g_ifparm.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>