Pull NVMe changes from Christoph:

"Below is another set of NVMe updates for 4.18.  Besides the usual bug
 fixes this includes more feature completness in terms of AEN and log
 page handling on the target."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme: use the changed namespaces list log to clear ns data changed AENs
  nvme: mark nvme_queue_scan static
  nvme: submit AEN event configuration on startup
  nvmet: mask pending AENs
  nvmet: add AEN configuration support
  nvmet: implement the changed namespaces log
  nvmet: split log page implementation
  nvmet: add a new nvmet_zero_sgl helper
  nvme.h: add AEN configuration symbols
  nvme.h: add the changed namespace list log
  nvme.h: untangle AEN notice definitions
  nvmet: fix error return code in nvmet_file_ns_enable()
  nvmet: fix a typo in nvmet_file_ns_enable()
  nvme-fabrics: allow internal passthrough command on deleting controllers
  nvme-loop: add support for multiple ports
  nvme-pci: simplify __nvme_submit_cmd
  nvme-pci: Rate limit the nvme timeout warnings
  nvme: allow duplicate controller if prior controller being deleted

There is almost no shared logic, which leads to a very confusing code
flow.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Both callers take just around so function call, so move it in.
Also remove the now pointless blk_mq_sched_init wrapper.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reported-by: NDamien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

These are only used by the block core.  Also move the declarations to
block/blk.h.
Reported-by: NDamien Le Moal <Damien.LeMoal@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

No point in doing this in elevator_init.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NDamien Le Moal <Damien.LeMoal@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Tested-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Per section 5.2 we need to issue the corresponding log page to clear an
AEN, so for a namespace data changed AEN we need to read the changed
namespace list log.  And once we read that log anyway we might as well
use it to optimize the rescan.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

And move it toward the top of the file to avoid a forward declaration.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>

We should register for AEN events; some law-abiding targets might
not be sending us AENs otherwise.
Signed-off-by: NHannes Reinecke <hare@suse.com>
[hch: slight cleanups]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

Per section 5.2 of the NVMe 1.3 spec:

  "When the controller posts a completion queue entry for an outstanding
  Asynchronous Event Request command and thus reports an asynchronous
  event, subsequent events of that event type are automatically masked by
  the controller until the host clears that event. An event is cleared by
  reading the log page associated with that event using the Get Log Page
  command (see section 5.14)."
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

AEN configuration via the 'Get Features' and 'Set Features' admin
command is mandatory, so we should be implemeting handling for it.
Signed-off-by: NHannes Reinecke <hare@suse.com>
[hch: use WRITE_ONCE, check for invalid values]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NDaniel Verkamp <daniel.verkamp@intel.com>

Just keep a per-controller buffer of changed namespaces and copy it out
in the get log page implementation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NDaniel Verkamp <daniel.verkamp@intel.com>

Remove the common code to allocate a buffer and copy it into the SGL.
Instead the two no-op implementations just zero the SGL directly, and
the smart log allocates a buffer on its own.  This prepares for the
more elaborate ANA log page.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>

Zeroes the SGL in the payload.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: NHannes Reinecke <hare@suse.com>
[hch: split from a larger patch]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>

Stop including the event type in the definitions for the notice type.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>

Fix to return error code -ENOMEM from the memory alloc fail error
handling case instead of 0, as done elsewhere in this function.

Fixes: d5eff33e ("nvmet: add simple file backed ns support")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.e>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Fix a typo in nvmet_file_ns_enable().

Fixes: d5eff33e ("nvmet: add simple file backed ns support")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.e>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Without this we can't cleanly shut down.

Based on analysis an an earlier patch from Hannes Reinecke.

Fixes: bb06ec31 ("nvme: expand nvmf_check_if_ready checks")
Reported-by: NHannes Reinecke <hare@suse.de>
Tested-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJames Smart <james.smart@broadcom.com>

BFQ can deem a bfq_queue as soft real-time only if the queue
- periodically becomes completely idle, i.e., empty and with
  no still-outstanding I/O request;
- after becoming idle, gets new I/O only after a special reference
  time soft_rt_next_start.

In this respect, after commit "block, bfq: consider also past I/O in
soft real-time detection", the value of soft_rt_next_start can never
decrease. This causes a problem with the following special updating
case for soft_rt_next_start: to prevent queues that are not completely
idle to be wrongly detected as soft real-time (when they become
non-empty again), soft_rt_next_start is temporarily set to infinity
for empty queues with still outstanding I/O requests. But, if such an
update is actually performed, then, because of the above commit,
soft_rt_next_start will be stuck at infinity forever, and the queue
will have no more chance to be considered soft real-time.

On slow systems, this problem does cause actual soft real-time
applications to be occasionally not detected as such.

This commit addresses this issue by eliminating the pushing of
soft_rt_next_start to infinity, and by changing the way non-empty
queues are prevented from being wrongly detected as soft
real-time. Simply, a queue that becomes non-empty again can now be
detected as soft real-time only if it has no outstanding I/O request.
Signed-off-by: NDavide Sapienza <sapienza.dav@gmail.com>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The maximum possible duration of the weight-raising period for
interactive applications is limited to 13 seconds, as this is the time
needed to load the largest application that we considered when tuning
weight raising. Unfortunately, in such an evaluation, we did not
consider the case of very slow virtual machines.

For example, on a QEMU/KVM virtual machine
- running in a slow PC;
- with a virtual disk stacked on a slow low-end 5400rpm HDD;
- serving a heavy I/O workload, such as the sequential reading of
several files;
mplayer takes 23 seconds to start, if constantly weight-raised.

To address this issue, this commit conservatively sets the upper limit
for weight-raising duration to 25 seconds.
Signed-off-by: NDavide Sapienza <sapienza.dav@gmail.com>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

BFQ computes the duration of weight raising for interactive
applications automatically, using some reference parameters. In
particular, BFQ uses the best durations (see comments in the code for
how these durations have been assessed) for two classes of systems:
slow and fast ones. Examples of slow systems are old phones or systems
using micro HDDs. Fast systems are all the remaining ones. Using these
parameters, BFQ computes the actual duration of the weight raising,
for the system at hand, as a function of the relative speed of the
system w.r.t. the speed of a reference system, belonging to the same
class of systems as the system at hand.

This slow vs fast differentiation proved to be useful in the past, but
happens to have little meaning with current hardware. Even worse, it
does cause problems in virtual systems, where the speed of the system
can vary frequently, and so widely to just confuse the class-detection
mechanism, and, as we have verified experimentally, to cause BFQ to
compute non-sensical weight-raising durations.

This commit addresses this issue by removing the slow class and the
class-detection mechanism.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A description of how weight raising works is missing in BFQ
sources. In addition, the code for handling weight raising is
scattered across a few functions. This makes it rather hard to
understand the mechanism and its rationale. This commits adds such a
description at the beginning of the main source file.
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Since bfq_finish_request() is always called on the request 'next',
after bfq_requests_merged() is finished, and bfq_finish_request()
removes 'next' from its bfq_queue if needed, it isn't necessary to do
such a removal in advance in bfq_merged_requests().

This commit removes such a useless 'next' removal.
Signed-off-by: NFilippo Muzzini <filippo.muzzini@outlook.it>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The request rq passed to the function bfq_requests_merged is always in
a bfq_queue, so the check !RB_EMPTY_NODE(&rq->rb_node) at the
beginning of bfq_requests_merged always succeeds, and the control
flow systematically skips to the end of the function.  This implies
that the body of the function is never executed, i.e., the
repositioning of rq is never performed.

On the opposite end, a control is missing in the body of the function:
'next' must be removed only if it is inside a bfq_queue.

This commit removes the wrong check on rq, and adds the missing check
on 'next'. In addition, this commit adds comments on
bfq_requests_merged.
Signed-off-by: NFilippo Muzzini <filippo.muzzini@outlook.it>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In bfq_requests_merged(), there is a deadlock because the lock on
bfqq->bfqd->lock is held by the calling function, but the code of
this function tries to grab the lock again.

This deadlock is currently hidden by another bug (fixed by next commit
for this source file), which causes the body of bfq_requests_merged()
to be never executed.

This commit removes the deadlock by removing the lock/unlock pair.
Signed-off-by: NFilippo Muzzini <filippo.muzzini@outlook.it>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Missed converting the bioset_integrity_create() bounce bio set
call.

Fixes: 338aa96d ("block: convert bounce, q->bio_split to bioset_init()/mempool_init()")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

All users have been converted to bioset_init(), kill off the
old API.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert XFS to embedded bio sets.
Acked-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert btrfs to embedded bio sets.
Acked-by: NChris Mason <clm@fb.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert block DIO code to embedded bio sets.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert the target code to embedded bio sets.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert dm to embedded bio sets.
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert md to embedded bio sets.
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert bcache to embedded bio sets.
Reviewed-by: NColy Li <colyli@suse.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert lightnvm to embedded bio sets.
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert pktcdvd to embedded bio sets.
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert drbd to embedded bio sets and mempools.
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Convert the core block functionality to embedded bio sets.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>