This basically came from the need to be able to boot 32-bit Atom SMP
guests on an AMD host, i.e. a host which doesn't support MOVBE. As a
matter of fact, qemu has since recently received MOVBE support but we
cannot share that with kvm emulation and thus we have to do this in the
host. We're waay faster in kvm anyway. :-)

So, we piggyback on the #UD path and emulate the MOVBE functionality.
With it, an 8-core SMP guest boots in under 6 seconds.

Also, requesting MOVBE emulation needs to happen explicitly to work,
i.e. qemu -cpu n270,+movbe...

Just FYI, a fairly straight-forward boot of a MOVBE-enabled 3.9-rc6+
kernel in kvm executes MOVBE ~60K times.
Signed-off-by: NAndre Przywara <andre@andrep.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add initial support for handling three-byte instructions in the
emulator.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Call it EmulateOnUD which is exactly what we're trying to do with
vendor-specific instructions.

Rename ->only_vendor_specific_insn to something shorter, while at it.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a field to the current emulation context which contains the
instruction opcode length. This will streamline handling of opcodes of
different length.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a kvm ioctl which states which system functionality kvm emulates.
The format used is that of CPUID and we return the corresponding CPUID
bits set for which we do emulate functionality.

Make sure ->padding is being passed on clean from userspace so that we
can use it for something in the future, after the ioctl gets cast in
stone.

s/kvm_dev_ioctl_get_supported_cpuid/kvm_dev_ioctl_get_cpuid/ while at
it.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Updates for KVM/ARM, take 2 including:
 - Transparent Huge Pages and hugetlbfs support for KVM/ARM
 - Yield CPU when guest executes WFE to speed up CPU overcommit

In kvm_iommu_map_pages(), we need to know the page size via call
kvm_host_page_size(). And it will check whether the target slot
is valid before return the right page size.
Currently, we will map the iommu pages when creating a new slot.
But we call kvm_iommu_map_pages() during preparing the new slot.
At that time, the new slot is not visible by domain(still in preparing).
So we cannot get the right page size from kvm_host_page_size() and
this will break the IOMMU super page logic.
The solution is to map the iommu pages after we insert the new slot
into domain.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Tested-by: NPatrick Lu <patrick.lu@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the host supports it, we can and should expose it to the guest as
well, just like we already do with PIN_BASED_VIRTUAL_NMIS.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

__vmx_complete_interrupts stored uninjected NMIs in arch.nmi_injected,
not arch.nmi_pending. So we actually need to check the former field in
vmcs12_save_pending_event. This fixes the eventinj unit test when run
in nested KVM.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As long as the hardware provides us 2MB EPT pages, we can also expose
them to the guest because our shadow EPT code already supports this
feature.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Support transparent huge pages in KVM/ARM and KVM/ARM64.  The
transparent_hugepage_adjust is not very pretty, but this is also how
it's solved on x86 and seems to be simply an artifact on how THPs
behave.  This should eventually be shared across architectures if
possible, but that can always be changed down the road.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Support huge pages in KVM/ARM and KVM/ARM64.  The pud_huge checking on
the unmap path may feel a bit silly as the pud_huge check is always
defined to false, but the compiler should be smart about this.

Note: This deals only with VMAs marked as huge which are allocated by
users through hugetlbfs only.  Transparent huge pages can only be
detected by looking at the underlying pages (or the page tables
themselves) and this patch so far simply maps these on a page-by-page
level in the Stage-2 page tables.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Update comments to reflect what is really going on and add the TWE bit
to the comments in kvm_arm.h.

Also renames the function to kvm_handle_wfx like is done on arm64 for
consistency and uber-correctness.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

On an (even slightly) oversubscribed system, spinlocks are quickly
becoming a bottleneck, as some vcpus are spinning, waiting for a
lock to be released, while the vcpu holding the lock may not be
running at all.

This creates contention, and the observed slowdown is 40x for
hackbench. No, this isn't a typo.

The solution is to trap blocking WFEs and tell KVM that we're
now spinning. This ensures that other vpus will get a scheduling
boost, allowing the lock to be released more quickly. Also, using
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance
when the VM is severely overcommited.

Quick test to estimate the performance: hackbench 1 process 1000

2xA15 host (baseline):	1.843s

2xA15 guest w/o patch:	2.083s
4xA15 guest w/o patch:	80.212s
8xA15 guest w/o patch:	Could not be bothered to find out

2xA15 guest w/ patch:	2.102s
4xA15 guest w/ patch:	3.205s
8xA15 guest w/ patch:	6.887s

So we go from a 40x degradation to 1.5x in the 2x overcommit case,
which is vaguely more acceptable.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Merging master into next to satisfy the dependencies.

Conflicts:
	arch/arm/kvm/reset.c

Updates for KVM/ARM including cpu=host and Cortex-A7 support

Some strange character leaped into the documentation, which makes
git-send-email behave quite strangely.  Get rid of this before it bites
anyone else.

Cc: Anup Patel <anup.patel@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Pull device tree fixes and reverts from Grant Likely:
 "One bug fix and three reverts.  The reverts back out the slightly
  controversial feeding the entire device tree into the random pool and
  the reserved-memory binding which isn't fully baked yet.  Expect the
  reserved-memory patches at least to resurface for v3.13.

  The bug fixes removes a scary but harmless warning on SPARC that was
  introduced in the v3.12 merge window.  v3.13 will contain a proper fix
  that makes the new code work on SPARC.

  On the plus side, the diffstat looks *awesome*.  I love removing lines
  of code"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
  Revert "drivers: of: add initialization code for dma reserved memory"
  Revert "ARM: init: add support for reserved memory defined by device tree"
  Revert "of: Feed entire flattened device tree into the random pool"
  of: fix unnecessary warning on missing /cpus node

Pull DMA-mapping fix from Marek Szyprowski:
 "A bugfix for the IOMMU-based implementation of dma-mapping subsystem
  for ARM architecture"

* 'fixes-for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: Always pass proper prot flags to iommu_map()

Pull kvm fix from Gleb Natapov.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Enable pvspinlock after jump_label_init() to avoid VM hang

Pull Xen fixes from Stefano Stabellini:
 "A small fix for Xen on x86_32 and a build fix for xen-tpmfront on
  arm64"

* tag 'stable/for-linus-3.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix possible user space selector corruption
  tpm: xen-tpmfront: fix missing declaration of xen_domain

We use jump label to enable pv-spinlock. With the changes in (442e0973
Merge branch 'x86/jumplabel'), the jump label behaviour has changed
that would result in eventual hang of the VM since we would end up in a
situation where slow path locks would halt the vcpus but we will not be
able to wakeup the vcpu by lock releaser using unlock kick.

Similar problem in Xen and more detailed description is available in
a945928e (xen: Do not enable spinlocks before jump_label_init()
has executed)

This patch splits kvm_spinlock_init to separate jump label changes with
pvops patching and also make jump label enabling after jump_label_init().
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Page pinning is not mandatory in kvm async page fault processing since
after async page fault event is delivered to a guest it accesses page once
again and does its own GUP.  Drop the FOLL_GET flag in GUP in async_pf
code, and do some simplifying in check/clear processing.
Suggested-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NGu zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Nchai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This reverts commit 9d8eab7a. There is
still no consensus on the bindings for the reserved memory and various
drawbacks of the proposed solution has been shown, so the best now is to
revert it completely and start again from scratch later.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

This reverts commit 10bcdfb8. There is
no consensus on the bindings for the reserved memory, so the code for
handing it will be reverted.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Pull vfio fix from Alex Williamson:
 "Fix an incorrect break out of nested loop in iommu mapping code"

* tag 'vfio-v3.12-rc5' of git://github.com/awilliam/linux-vfio:
  VFIO: vfio_iommu_type1: fix bug caused by break in nested loop

Pull infiniband updates from Roland Dreier:
 "Last batch of IB changes for 3.12: many mlx5 hardware driver fixes
  plus one trivial semicolon cleanup"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Remove unnecessary semicolons
  IB/mlx5: Ensure proper synchronization accessing memory
  IB/mlx5: Fix alignment of reg umr gather buffers
  IB/mlx5: Fix eq names to display nicely in /proc/interrupts
  mlx5: Fix error code translation from firmware to driver
  IB/mlx5: Fix opt param mask according to firmware spec
  mlx5: Fix opt param mask for sq err to rts transition
  IB/mlx5: Disable atomic operations
  mlx5: Fix layout of struct mlx5_init_seg
  mlx5: Keep polling to reclaim pages while any returned
  IB/mlx5: Avoid async events on invalid port number
  IB/mlx5: Decrease memory consumption of mr caches
  mlx5: Remove checksum on command interface commands
  IB/mlx5: Fix memory leak in mlx5_ib_create_srq
  IB/mlx5: Flush cache workqueue before destroying it
  IB/mlx5: Fix send work queue size calculation

These aren't necessary after switch blocks.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Pull ARM fixes from Russell King:
 "Some more ARM fixes, nothing particularly major here.  The biggest
  change is to fix the SMP_ON_UP code so that it works with TI's Aegis
  cores"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7851/1: check for number of arguments in syscall_get/set_arguments()
  ARM: 7846/1: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
  ARM: 7845/1: sharpsl_param.c: fix invalid memory access for pxa devices
  ARM: 7843/1: drop asm/types.h from generic-y
  ARM: 7842/1: MCPM: don't explode if invoked without being initialized first

Pull SLAB fix from Pekka Enberg:
 "A regression fix for overly eager slab cache name checks"

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab_common: Do not check for duplicate slab names

Pull ACPI and power management fixes from Rafael Wysocki:
 "These fix two recent bugs in ACPIPHP (ACPI-based PCI hotplug) and
  update a bunch of web links and e-mail addresses in MAINTAINERS, docs
  and Kconfig that either are stale or will expire soon.

  Specifics:

   - The WARN_ON() in acpiphp_enumerate_slots() triggers as a false
     positive in some cases, so drop it.

   - Add a missing pci_dev_put() to an error code path in
     acpiphp_enumerate_slots().

   - Replace my old e-mail address that's going to expire with a new
     one.

   - Update ACPI web links and git tree information in MAINTAINERS.

   - Update links to the Linux-ACPI project's page in MAINTAINERS.

   - Update some stale links and e-mail addresses under Documentation
     and in the ACPI Kconfig file"

* tag 'pm+acpi-3.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug / PCI: Drop WARN_ON() from acpiphp_enumerate_slots()
  ACPI / hotplug / PCI: Fix error code path in acpiphp_enumerate_slots()
  ACPI / PM / Documentation: Replace outdated project links and addresses
  MAINTAINERS / ACPI: Update links to the Linux-ACPI project web page
  MAINTAINERS / ACPI: Update links and git tree information
  MAINTAINERS / Documentation: Update Rafael's e-mail address

This reverts commit 109b6236.

Tim Bird expressed concern that this will have a bad effect on boot
time, and while simple tests have shown it to be okay with simple tree,
a device tree blob can potentially be quite large and
add_device_randomness() is not a fast function. Rather than do this for
all platforms unconditionally, I'm reverting this patch and would like
to see it revisited. Instead of feeding the entire tree into the random
pool, it would probably be appropriate to hash the tree and feed the
hash result into the pool. There really isn't a lot of randomness in a
device tree anyway. In the majority of cases only a handful of
properties are going to be different between machines with the same
baseboard.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Not all DT platforms have all the cpus collected under a /cpus node.
That just happens to be a details of FDT, ePAPR and PowerPC platforms.
Sparc does something different, but unfortunately the current code
complains with a warning if /cpus isn't there. This became a problem
with commit f86e4718, "driver/core cpu: initialize of_node in cpu's
device structure", which caused the function to get called for all
architectures.

This commit is a temporary fix to fail silently if the cpus node isn't
present. A proper fix will come later to allow arch code to provide a
custom mechanism for decoding the CPU hwid if the 'reg' property isn't
appropriate.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: David Miller <davem@davemloft.net>
Cc: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Cc: Rob Herring <rob.herring@calxeda.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The KVM_HPAGE_DEFINES are a little artificial on ARM, since the huge
page size is statically defined at compile time and there is only a
single huge page size.

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>