- 13 12月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
- 12 12月, 2009 1 次提交
-
-
由 Alexey Fisher 提交于
The pin config provided by BIOS have some problems: 0x0221401f: [Jack] HP Out at Ext Front <-- other association and sequence 0x02a19020: [Jack] Mic at Ext Front <-- other association 0x01113014: [Jack] Speaker at Ext Rear <-- line out (not speaker) 0x01114010: [Jack] Speaker at Ext Rear <-- line out 0x01a19030: [Jack] Mic at Ext Rear <-- other association 0x01111012: [Jack] Speaker at Ext Rear <-- line out 0x01116011: [Jack] Speaker at Ext Rear <-- line out 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x01451140: [Jack] SPDIF Out at Ext Rear 0x40f000f0: [N/A] Other at Ext N/A just overwrite it. Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 12月, 2009 8 次提交
-
-
由 Wu Fengguang 提交于
For codecs without EPSS support (G45/IbexPeak), the hotplug event will be lost if the HDA is powered off during the time. After that the pin presence detection verb returns inaccurate info. So always power-on HDA link for !EPSS codecs. KarL offers the fact and Takashi recommends to flag hda_bus. Thanks! Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The timer stop callback can be called from snd_timer_interrupt(), which is called from the hrtimer callback. Since hrtimer_cancel() waits for the callback completion, this eventually results in a lock-up. This patch fixes the problem by just toggling a flag at stop callback and call hrtimer_cancel() later. Reported-and-tested-by: NWojtek Zabolotny <W.Zabolotny@elka.pw.edu.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
IbexPeak is the first Intel HDMI audio codec to support channel mapping. Currently the outstanding problem is, the HDMI channel order do not agree with that of ALSA. This patch presents workaround for some typical use cases. It gives priority to the typical ALSA surround configurations, and defines channel mapping for them. We may need better kernel+userspace interactive channel mapping scheme. For example, in current scheme if user plays with the surround50 device, the kernel is unaware of this and will still select the surround41 channel allocation and channel mapping.. Thanks to Marcin for offering good tips! Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
HDA036-A specifies that the Audio Sample Packet (ASP) Channel Mapping verbs apply to Digital Display Pin Complex instead of Converter. With this fix, channel mapping is working as expected for IbexPeak. Thanks to Marcin for pointing this out! Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
HDA036 spec states: DP (Display Port) indicates whether the Pin Complex Widget supports connection to a Display Port sink. Supported if set to 1. Note that it is possible for the pin widget to support more than one digital display connection type, e.g. HDMI and DP bit are both set to 1. Also export the DP pin cap in procfs. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Note that the HBR capability only applies to HDMI pin. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
This patch fixes an error in processing of the HP BIOS configuration to enable GPIO based mute LED indicator control. That error causes driver to enable such control on all HP systems with the 92HD75 IDT codecs and results in unnecessary toggling of the GPIO on mute control manipulation. It also adds support of the future HP BIOS configuration extension for the named control. New configuration string has a format HP_Mute_LED_P_G where P can be 0 or 1 and defines mute LED GPIO control state (low/high) that corresponds to the NOT muted state of the master volume and G is the index of the GPIO to use (0..9) Lastly, it adds more systems to the support of the audio implementation as found on HP B-series systems Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Olof Johansson 提交于
There are build errors when building for some of the omap2/3 boards without enabling sound: sound/built-in.o:(.data+0x43bc): undefined reference to `soc_codec_dev_tlv320aic23' sound/built-in.o:(.data+0x43cc): undefined reference to `tlv320aic23_dai' Confused me quite a bit since the drivers that had references to the codec weren't enabled. Turns out the Makefile was using the wrong config option to enable them. Patch below. Reported-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 12月, 2009 3 次提交
-
-
由 Krzysztof Helt 提交于
Use the chip->irq to check if the irq should be released so the irq is not released if it has not been allocated. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
- 09 12月, 2009 6 次提交
-
-
由 Jaroslav Kysela 提交于
The volume levels in original implementation are incorrect and does not match the dB scale. The real range is linear (in the sense of the dB scale) from 0dB to -100dB. Remove logaritmic table and make all volumes from range 0dB..100dB. The tests are in RedHat's bugzilla #540817. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Santinoli 提交于
Quirk for the ALC662 found on the Intel D945GCLF2 (and possibly other) mainboards. Signed-off-by: NDavid Santinoli <david@santinoli.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Confirmed from vendor and tests in RedHat bugzilla #536782 . Signed-off-by: NJaroslav Kysela <perex@perex.cz> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Alexey Fisher 提交于
Just to save some time, add direct git link to grub hda-analyzer Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
miropcm20 uses ALSA (snd_) interfaces from the SND_MIRO driver, so it should depend on SND. (selecting SND_MIRO when CONFIG_SND is not enabled is a problem.) drivers/built-in.o: In function `vidioc_s_ctrl': radio-miropcm20.c:(.text+0x227499): undefined reference to `snd_aci_cmd' drivers/built-in.o: In function `vidioc_s_frequency': radio-miropcm20.c:(.text+0x227574): undefined reference to `snd_aci_cmd' radio-miropcm20.c:(.text+0x227588): undefined reference to `snd_aci_cmd' drivers/built-in.o: In function `pcm20_init': radio-miropcm20.c:(.init.text+0x2a784): undefined reference to `snd_aci_get_aci' miropcm20 selects SND_MIRO but SND_ISA may be not enabled, so also select SND_ISA so that the snd-miro driver will be built. Otherwise there are missing symbols: ERROR: "snd_opl4_create" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_pcm" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_timer" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_create" [sound/isa/opti9xx/snd-miro.ko] undefined! ERROR: "snd_wss_mixer" [sound/isa/opti9xx/snd-miro.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add a flag to spec field so that the EAPD inversion can be checked outside the relevant control callbacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 12月, 2009 6 次提交
-
-
由 Roel Kluin 提交于
The wrong variable was returned in the case of an error Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Tobias Hansen 提交于
I added the product IDs of the new revisions of the devices, so owners can test whether this suffices to make them work. Patched against ALSA snapshot 20091207. Signed-off-by: Tobias Hansen <Tobias.Hansen at physik.uni-hamburg.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
On Realtek codecs, a digital mic pin is connected often only to a single ADC. But the parser tries to set up all ADCs no matter whether the digital mic is available, and results in non-selectable input source. This patch adds a check of input-source availability of each ADC, and excludes ones that don't support all input sources. Reference: Novell bnc#561235 http://bugzilla.novell.com/show_bug.cgi?id=561235Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Realtek codecs may have "PCM" and "Line-Out" playback switches, and they can be slaves for vmaster. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Justin P. Mattock 提交于
This is an updated patch for the Apple iMac 9,1 model to add sound. Original patch posted here: http://article.gmane.org/gmane.linux.alsa.devel/61361/match= I have been using this patch for a while now and have to say it works vary well, except for a few minor things: With the iMac 24-inch 3.06GHz Intel Core 2 Duo everything seems to be working as it should, although I have not looked into the microphone (never really use one, nor have any apps to test, my guess is it doesn't work, or I never figured out how to get it to work). With the iMac 24-inch 2.66GHz Intel Core 2 Duo everything is the same as with the above machine except I'm hearing a light scratchy/distortion noise come out of the speakers when using headphones(above machine does not do this). Other than that the sound level is great(especially with good Dj headphones). Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Tested-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Krzysztof Helt 提交于
The PnP data on the OPTI931 and OPTI933 contains io port range for the MC indirect registers. Use the PnP range instead of hardwired value 0xE0E. Also, request region of MC indirect registers so it is marked as used to other drivers (this was missing previously). Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 12月, 2009 8 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Mark Brown 提交于
The symbols aren't declared and don't need to be exported, they go along with the device structure. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NBen Dooks <ben-linux@fluff.org>
-
由 Joonyoung Shim 提交于
This renames from a character / to : of controls. A / occurs below error messages. ASoC: Failed to create IN2RP/VXRP debugfs file ASoC: Failed to create IN2LP/VXRN debugfs file Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ondrej Zary 提交于
When primary AC97 is not found, don't fail with tons of AC97 errors. Assume that the card is SF64-PCR (tuner-only). This makes the SF64-PCR radio card work "out of the box". Also fixes a bug that can cause an oops here: if (tea575x_tuner > 0 && (tea575x_tuner & 0x000f) < 4) { when tea575x_tuner == 16, it passes this check and causes problems a couple lines below: chip->tea.ops = &snd_fm801_tea_ops[(tea575x_tuner & 0x000f) - 1]; Tested with SF64-PCR, but I don't have any of those sound or sound+radio cards to test if I didn't break anything. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Fix mute state reporting in tea575x-tuner. This fixes mute function in kradio on SF64-PCR radio card. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 12月, 2009 5 次提交
-
-
由 Manuel Lauss 提交于
free the allocated pcm platform device in the error path. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Manuel Lauss 提交于
platform_device_unregister() frees resources for us, no need to do it explicitly. Fixes an oops when machine code removes the soc-audio device. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
The previous hack for replacing the codec name give memory leaks at error paths. This patch fixes them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Fixed List: 1. Add alc_read_coef_idx function 2. Add ALC661 ALC259 3. Add ALC892 ALC888VD Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Krzysztof Helt 提交于
Remove snd_opti9xx fields which are indirect arguments to the snd_opti9xx_configure(). Pass these values as function arguments. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 12月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Now snd_ac97_pcm_open() is called with the exactly same arguments for both playback and capture directions. Remove the unneeded check. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-