Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 8月, 2013 9 次提交
  3. 31 7月, 2013 8 次提交
  5. 23 7月, 2013 15 次提交
    • P
      sched: Micro-optimize the smart wake-affine logic · 7d9ffa89
      由 Peter Zijlstra 提交于 
      Smart wake-affine is using node-size as the factor currently, but the overhead
of the mask operation is high.

Thus, this patch introduce the 'sd_llc_size' percpu variable, which will record
the highest cache-share domain size, and make it to be the new factor, in order
to reduce the overhead and make it more reasonable.
Tested-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Link: http://lkml.kernel.org/r/51D5008E.6030102@linux.vnet.ibm.com
[ Tidied up the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      7d9ffa89
    • M
      sched: Implement smarter wake-affine logic · 62470419
      由 Michael Wang 提交于 
      The wake-affine scheduler feature is currently always trying to pull
the wakee close to the waker. In theory this should be beneficial if
the waker's CPU caches hot data for the wakee, and it's also beneficial
in the extreme ping-pong high context switch rate case.

Testing shows it can benefit hackbench up to 15%.

However, the feature is somewhat blind, from which some workloads
such as pgbench suffer. It's also time-consuming algorithmically.

Testing shows it can damage pgbench up to 50% - far more than the
benefit it brings in the best case.

So wake-affine should be smarter and it should realize when to
stop its thankless effort at trying to find a suitable CPU to wake on.

This patch introduces 'wakee_flips', which will be increased each
time the task flips (switches) its wakee target.

So a high 'wakee_flips' value means the task has more than one
wakee, and the bigger the number, the higher the wakeup frequency.

Now when making the decision on whether to pull or not, pay attention to
the wakee with a high 'wakee_flips', pulling such a task may benefit
the wakee. Also imply that the waker will face cruel competition later,
it could be very cruel or very fast depends on the story behind
'wakee_flips', waker therefore suffers.

Furthermore, if waker also has a high 'wakee_flips', that implies that
multiple tasks rely on it, then waker's higher latency will damage all
of them, so pulling wakee seems to be a bad deal.

Thus, when 'waker->wakee_flips / wakee->wakee_flips' becomes
higher and higher, the cost of pulling seems to be worse and worse.

The patch therefore helps the wake-affine feature to stop its pulling
work when:

	wakee->wakee_flips > factor &&
	waker->wakee_flips > (factor * wakee->wakee_flips)

The 'factor' here is the number of CPUs in the current CPU's NUMA node,
so a bigger node will lead to more pulling since the trial becomes more
severe.

After applying the patch, pgbench shows up to 40% improvements and no regressions.

Tested with 12 cpu x86 server and tip 3.10.0-rc7.

The percentages in the final column highlight the areas with the biggest wins,
all other areas improved as well:

	pgbench		    base	smart

	| db_size | clients |  tps  |	|  tps  |
	+---------+---------+-------+   +-------+
	| 22 MB   |       1 | 10598 |   | 10796 |
	| 22 MB   |       2 | 21257 |   | 21336 |
	| 22 MB   |       4 | 41386 |   | 41622 |
	| 22 MB   |       8 | 51253 |   | 57932 |
	| 22 MB   |      12 | 48570 |   | 54000 |
	| 22 MB   |      16 | 46748 |   | 55982 | +19.75%
	| 22 MB   |      24 | 44346 |   | 55847 | +25.93%
	| 22 MB   |      32 | 43460 |   | 54614 | +25.66%
	| 7484 MB |       1 |  8951 |   |  9193 |
	| 7484 MB |       2 | 19233 |   | 19240 |
	| 7484 MB |       4 | 37239 |   | 37302 |
	| 7484 MB |       8 | 46087 |   | 50018 |
	| 7484 MB |      12 | 42054 |   | 48763 |
	| 7484 MB |      16 | 40765 |   | 51633 | +26.66%
	| 7484 MB |      24 | 37651 |   | 52377 | +39.11%
	| 7484 MB |      32 | 37056 |   | 51108 | +37.92%
	| 15 GB   |       1 |  8845 |   |  9104 |
	| 15 GB   |       2 | 19094 |   | 19162 |
	| 15 GB   |       4 | 36979 |   | 36983 |
	| 15 GB   |       8 | 46087 |   | 49977 |
	| 15 GB   |      12 | 41901 |   | 48591 |
	| 15 GB   |      16 | 40147 |   | 50651 | +26.16%
	| 15 GB   |      24 | 37250 |   | 52365 | +40.58%
	| 15 GB   |      32 | 36470 |   | 50015 | +37.14%
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/51D50057.9000809@linux.vnet.ibm.com
[ Improved the changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      62470419
    • V
      sched: Move h_load calculation to task_h_load() · 68520796
      由 Vladimir Davydov 提交于 
      The bad thing about update_h_load(), which computes hierarchical load
factor for task groups, is that it is called for each task group in the
system before every load balancer run, and since rebalance can be
triggered very often, this function can eat really a lot of cpu time if
there are many cpu cgroups in the system.

Although the situation was improved significantly by commit a35b6466
('sched, cgroup: Reduce rq->lock hold times for large cgroup
hierarchies'), the problem still can arise under some kinds of loads,
e.g. when cpus are switching from idle to busy and back very frequently.

For instance, when I start 1000 of processes that wake up every
millisecond on my 8 cpus host, 'top' and 'perf top' show:

Cpu(s): 17.8%us, 24.3%sy,  0.0%ni, 57.9%id,  0.0%wa,  0.0%hi,  0.0%si
Events: 243K cycles
  7.57%  [kernel]               [k] __schedule
  7.08%  [kernel]               [k] timerqueue_add
  6.13%  libc-2.12.so           [.] usleep

Then if I create 10000 *idle* cpu cgroups (no processes in them), cpu
usage increases significantly although the 'wakers' are still executing
in the root cpu cgroup:

Cpu(s): 19.1%us, 48.7%sy,  0.0%ni, 31.6%id,  0.0%wa,  0.0%hi,  0.7%si
Events: 230K cycles
 24.56%  [kernel]            [k] tg_load_down
  5.76%  [kernel]            [k] __schedule

This happens because this particular kind of load triggers 'new idle'
rebalance very frequently, which requires calling update_h_load(),
which, in turn, calls tg_load_down() for every *idle* cpu cgroup even
though it is absolutely useless, because idle cpu cgroups have no tasks
to pull.

This patch tries to improve the situation by making h_load calculation
proceed only when h_load is really necessary. To achieve this, it
substitutes update_h_load() with update_cfs_rq_h_load(), which computes
h_load only for a given cfs_rq and all its ascendants, and makes the
load balancer call this function whenever it considers if a task should
be pulled, i.e. it moves h_load calculations directly to task_h_load().
For h_load of the same cfs_rq not to be updated multiple times (in case
several tasks in the same cgroup are considered during the same balance
run), the patch keeps the time of the last h_load update for each cfs_rq
and breaks calculation when it finds h_load to be uptodate.

The benefit of it is that h_load is computed only for those cfs_rq's,
which really need it, in particular all idle task groups are skipped.
Although this, in fact, moves h_load calculation under rq lock, it
should not affect latency much, because the amount of work done under rq
lock while trying to pull tasks is limited by sched_nr_migrate.

After the patch applied with the setup described above (1000 wakers in
the root cgroup and 10000 idle cgroups), I get:

Cpu(s): 16.9%us, 24.8%sy,  0.0%ni, 58.4%id,  0.0%wa,  0.0%hi,  0.0%si
Events: 242K cycles
  7.57%  [kernel]                  [k] __schedule
  6.70%  [kernel]                  [k] timerqueue_add
  5.93%  libc-2.12.so              [.] usleep
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1373896159-1278-1-git-send-email-vdavydov@parallels.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      68520796
    • A
      perf tools: Add test for converting perf time to/from TSC · 3bd5a5fc
      由 Adrian Hunter 提交于 
      The test uses the newly added cap_usr_time_zero and time_zero of
perf_event_mmap_page.  TSC from rdtsc is compared with the time
from 2 perf events.  The test passes if the calculated times are
all in the correct order.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1372425741-1676-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      3bd5a5fc
    • A
      perf/x86: Add ability to calculate TSC from perf sample timestamps · c73deb6a
      由 Adrian Hunter 提交于 
      For modern CPUs, perf clock is directly related to TSC.  TSC
can be calculated from perf clock and vice versa using a simple
calculation.  Two of the three componenets of that calculation
are already exported in struct perf_event_mmap_page.  This patch
exports the third.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1372425741-1676-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      c73deb6a
    • A
      perf: Fix broken union in 'struct perf_event_mmap_page' · 860f085b
      由 Adrian Hunter 提交于 
      The capabilities bits must not be "union'ed" together.
Put them in a separate struct.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372425741-1676-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      860f085b
    • P
      perf: Update perf_event_type documentation · a5cdd40c
      由 Peter Zijlstra 提交于 
      Due to a discussion with Adrian I had a good look at the perf_event_type record
layout and found the documentation to be somewhat unclear.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130716150907.GL23818@dyad.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a5cdd40c
    • J
      kprobes/x86: Call out into INT3 handler directly instead of using notifier · 17f41571
      由 Jiri Kosina 提交于 
      In fd4363ff ("x86: Introduce int3 (breakpoint)-based
instruction patching"), the mechanism that was introduced for
notifying alternatives code from int3 exception handler that and
exception occured was die_notifier.

This is however problematic, as early code might be using jump
labels even before the notifier registration has been performed,
which will then lead to an oops due to unhandled exception. One
of such occurences has been encountered by Fengguang:

 int3: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc1-01429-g04bf576 #8
 task: ffff88000da1b040 ti: ffff88000da1c000 task.ti: ffff88000da1c000
 RIP: 0010:[<ffffffff811098cc>]  [<ffffffff811098cc>] ttwu_do_wakeup+0x28/0x225
 RSP: 0000:ffff88000dd03f10  EFLAGS: 00000006
 RAX: 0000000000000000 RBX: ffff88000dd12940 RCX: ffffffff81769c40
 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000001
 RBP: ffff88000dd03f28 R08: ffffffff8176a8c0 R09: 0000000000000002
 R10: ffffffff810ff484 R11: ffff88000dd129e8 R12: ffff88000dbc90c0
 R13: ffff88000dbc90c0 R14: ffff88000da1dfd8 R15: ffff88000da1dfd8
 FS:  0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 00000000ffffffff CR3: 0000000001c88000 CR4: 00000000000006e0
 Stack:
  ffff88000dd12940 ffff88000dbc90c0 ffff88000da1dfd8 ffff88000dd03f48
  ffffffff81109e2b ffff88000dd12940 0000000000000000 ffff88000dd03f68
  ffffffff81109e9e 0000000000000000 0000000000012940 ffff88000dd03f98
 Call Trace:
  <IRQ>
  [<ffffffff81109e2b>] ttwu_do_activate.constprop.56+0x6d/0x79
  [<ffffffff81109e9e>] sched_ttwu_pending+0x67/0x84
  [<ffffffff8110c845>] scheduler_ipi+0x15a/0x2b0
  [<ffffffff8104dfb4>] smp_reschedule_interrupt+0x38/0x41
  [<ffffffff8173bf5d>] reschedule_interrupt+0x6d/0x80
  <EOI>
  [<ffffffff810ff484>] ? __atomic_notifier_call_chain+0x5/0xc1
  [<ffffffff8105cc30>] ? native_safe_halt+0xd/0x16
  [<ffffffff81015f10>] default_idle+0x147/0x282
  [<ffffffff81017026>] arch_cpu_idle+0x3d/0x5d
  [<ffffffff81127d6a>] cpu_idle_loop+0x46d/0x5db
  [<ffffffff81127f5c>] cpu_startup_entry+0x84/0x84
  [<ffffffff8104f4f8>] start_secondary+0x3c8/0x3d5
  [...]

Fix this by directly calling poke_int3_handler() from the int3
exception handler (analogically to what ftrace has been doing
already), instead of relying on notifier, registration of which
might not have yet been finalized by the time of the first trap.
Reported-and-tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1307231007490.14024@pobox.suse.czSigned-off-by: NIngo Molnar <mingo@kernel.org>
      17f41571
    • I
      Merge tag 'perf-core-for-mingo' of... · 4f16d61f
      由 Ingo Molnar 提交于 
      Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

  * Fix memcpy benchmark for large sizes, from Andi Kleen.

  * Support callchain sorting based on addresses, from Andi Kleen

  * Move weight back to common sort keys, From Andi Kleen.

  * Fix named threads support in 'perf script', from David Ahern.

  * Handle ENODEV on default cycles event, fix from David Ahern.

  * More install tests, from Jiri Olsa.

  * Fix build with perl 5.18, from Kirill A. Shutemov.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      4f16d61f
    • A
      perf tools: Move weight back to common sort keys · f9ea55d0
      由 Andi Kleen 提交于 
      This is a partial revert of Namhyung's patch

 afab87b9
 perf sort: Separate out memory-specific sort keys

He wrote

 For global/local weights, I'm not entirely sure to place them into the
 memory dimension.  But it's the only user at this time.

Well TSX is another (in fact the original) user of the flags, and it
needs them to be common. So move local/global weight back to the common
sort keys.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1374188333-17899-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f9ea55d0
    • J
      perf tests: Add broken install-* tests into tests/make · dbad4189
      由 Jiri Olsa 提交于 
      Adding install-* tests into tests/make. Those tests are
broken, so commenting them out right away.

* Nothing get installed for install-man, install_doc and
  install_html targets, they just rebuild the documentation.

* I've got following error for 'install-info':

  $ make -f tests/make make_install_info
  - make_install_info: cd . && make -f Makefile DESTDIR=/tmp/tmp.Xi4mb9J1a0 install-info

  $ tail -f make_install_info
  ...
  PERF_VERSION = 3.11.rc1.g9b3c2d
  make[2]: *** No rule to make target `user-manual.xml', needed by `user-manual.texi'.  Stop.
  make[1]: *** [install-info] Error 2

* I've got following error for 'install-pdf':

  $ make -f tests/make make_install_pdf
  - make_install_pdf: cd . && make -f Makefile DESTDIR=/tmp/tmp.fXseECBbt1 install-pdf

  $ tail -f make_install_pdf
  ...
  PERF_VERSION = 3.11.rc1.g9b3c2d
  make[2]: *** No rule to make target `user-manual.xml', needed by `user-manual.pdf'.  Stop.
  make[1]: *** [install-pdf] Error 2
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-6-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      dbad4189
    • J
      perf tests: Add 'make install/install-bin' tests into tests/make · c0ec1108
      由 Jiri Olsa 提交于 
      Adding 'make install' and 'make install-bin' tests into tests/make. It's
run as part of the suite, but could be run separately like:

  $ make -f tests/make make_install
  - make_install: cd . && make -f Makefile DESTDIR=/tmp/tmp.LpkYbk5pfs install
    test: test -x /tmp/tmp.LpkYbk5pfs/bin/perf
  $ make -f tests/make make_install_bin
  - make_install_bin: cd . && make -f Makefile DESTDIR=/tmp/tmp.dMxePBMcFT
    install-bin
    test: test -x /tmp/tmp.dMxePBMcFT/bin/perf
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c0ec1108
    • J
      perf tests: Add DESTDIR=TMP_DEST tests/make variable · c9311674
      由 Jiri Olsa 提交于 
      Adding TMP_DEST tests/make variable to provide the DESTDIR directory for
installation tests.

Adding this to existing test targets, since DESTDIR variable 'should
not' affect other than install* targets. We can always separate this if
there's a need for DESTDIR-free build test.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-4-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c9311674
    • J
      perf tests: Rename TMP to TMP_O tests/make variable · 8ba7cdea
      由 Jiri Olsa 提交于 
      Renaming TMP to TMP_O tests/make variable to make a name space for other
temp variables.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      8ba7cdea
    • J
      perf tests: Run ctags/cscope make tests only with needed binaries · 0659e669
      由 Jiri Olsa 提交于 
      Running tags and cscope make tests only if the 'ctags' and 'cscope'
binaries are installed, so we don't have false alarm test failures.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1374497014-2817-2-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0659e669
  7. 22 7月, 2013 5 次提交
    • K
      perf tools: Fix build with perl 5.18 · 575bf1d0
      由 Kirill A. Shutemov 提交于 
      perl.h from new Perl release doesn't like -Wundef and -Wswitch-default:

/usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT)
     ^
/usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0,
                 from /usr/lib/perl5/core_perl/CORE/perl.h:3480,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default]
   switch( left )
   ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default]
     switch (rem) { \
     ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default]
     switch(bytes_in_carry) { /* how many bytes in carry */
     ^

Let's disable the warnings for code which uses perl.h.
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.nameSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      575bf1d0
    • A
      perf tools: Support callchain sorting based on addresses · 99571ab3
      由 Andi Kleen 提交于 
      With programs with very large functions it can be useful to distinguish
the callgraph nodes on more than just function names. So for example if
you have multiple calls to the same function, it ends up being separate
nodes in the chain.

This patch adds a new key field to the callgraph options, that allows
comparing nodes on functions (as today, default) and addresses.

Longer term it would be nice to also handle src lines, but that would
need more changes and address is a reasonable proxy for it today.

I right now reference the global params, as there was no simple way to
register a params pointer.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-0uskktybf0e7wrnoi5e9b9it@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      99571ab3
    • A
      perf bench: Fix memcpy benchmark for large sizes · a198996c
      由 Andi Kleen 提交于 
      The glibc calloc() function has an optimization to not explicitely
memset() very large calloc allocations that just came from mmap(),
because they are known to be zero.

This could result in the perf memcpy benchmark reading only from
the zero page, which gives unrealistic results.

Always call memset explicitly on the source area to avoid this problem.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-pzz2qrdq9eymxda0y8yxdn33@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a198996c
    • D
      perf evsel: Handle ENODEV on default cycles event · 2b821cce
      由 David Ahern 提交于 
      Some systems (e.g., VMs on qemu-0.13 with the default vcpu model) report
an unsupported CPU model:

Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.

Subsequent invocations of perf fail with:

The sys_perf_event_open() syscall returned with 19 (No such device) for event (cycles).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?

Add ENODEV to the list of errno's to fallback to cpu-clock.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1374190079-28507-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2b821cce
    • D
      perf script: Fix named threads support · 2eaa1b40
      由 David Ahern 提交于 
      Commit 73994dc1 broke named thread support in perf-script. The thread
struct in al is the main thread for a multithreaded process. The thread
struct used for analysis (e.g., dumping events) should be the specific
thread for the sample.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/1374185175-28272-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2eaa1b40
  9. 19 7月, 2013 3 次提交