Fix some warnings that appear when compiling with -Wconversion.
A sub-optimal choice of variable type leads to warnings about
conversion in both directions between unsigned and signed.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Fix problems noted in compilion with -Wformat=2 -Wformat-signedness.
In particular, a mismatch between the signedness of a value and the
signedness of its format specifier can result in unsigned values being
printed as negative numbers, e.g.:

  Partition (0 type 1511) starts at physical 460, block length -1779968542

...which occurs when mounting a large (> 1 TiB) UDF partition.

Changes since V1:
* Fixed additional issues noted in udf_bitmap_free_blocks(),
  udf_get_fileident(), udf_show_options()
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Large (> 1 TiB) UDF filesystems appear subject to several problems when
mounted on 64-bit systems:

* readdir() can fail on a directory containing File Identifiers residing
  above 0x7FFFFFFF. This manifests as a 'ls' command failing with EIO.

* FIBMAP on a file block located above 0x7FFFFFFF can return a negative
  value. The low 32 bits are correct, but applications that don't mask the
  high 32 bits of the result can perform incorrectly.

Per suggestion by Jan Kara, introduce a udf_pblk_t type for representation
of UDF block addresses. Ultimately, all driver functions that manipulate
UDF block addresses should use this type; for now, deployment is limited
to functions with actual or potential sign extension issues.

Changes to udf_readdir() and udf_block_map() address the issues noted
above; other changes address potential similar issues uncovered during
audit of the driver code.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NJan Kara <jack@suse.cz>

When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.
Reported-by: NCezary Sliwa <sliwa@ifpan.edu.pl>
Signed-off-by: NJan Kara <jack@suse.cz>

Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJan Kara <jack@suse.cz>

Replace the specification of data structures by variable references
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJan Kara <jack@suse.cz>

MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix affected source code places.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJan Kara <jack@suse.cz>

Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Convert udf_disk_stamp_to_time() to use mktime64() to simplify the code.
As a bonus we get working timestamp conversion for dates before epoch
and after 2038 (both of which are allowed by UDF standard).
Signed-off-by: NJan Kara <jack@suse.cz>

UDF on-disk time stamp is stored in a form very similar to struct tm.
Use time64_to_tm() for conversion of seconds since epoch to year, month,
... format and then just copy this as necessary to UDF on-disk
structure to simplify the code.
Signed-off-by: NJan Kara <jack@suse.cz>

udf_setsize() called truncate_setsize() with i_data_sem held. Thus
truncate_pagecache() called from truncate_setsize() could lock a page
under i_data_sem which can deadlock as page lock ranks below
i_data_sem - e. g. writeback can hold page lock and try to acquire
i_data_sem to map a block.

Fix the problem by moving truncate_setsize() calls from under
i_data_sem. It is safe for us to change i_size without holding
i_data_sem as all the places that depend on i_size being stable already
hold inode_lock.

CC: stable@vger.kernel.org
Fixes: 7e49b6f2Signed-off-by: NJan Kara <jack@suse.cz>

We don't hold inode_lock in udf_adinicb_writepage() so use i_size_read()
to get i_size. This cannot cause real problems is i_size is guaranteed
to be small but let's be careful.
Signed-off-by: NJan Kara <jack@suse.cz>

__udf_adinicb_readpage() uses i_size several times. When truncate
changes i_size while the function is running, it can observe several
different values and thus e.g. expose uninitialized parts of page to
userspace. Also use i_size_read() in the function since it does not hold
inode_lock. Since i_size is guaranteed to be small, this cannot really
cause any issues even on 32-bit archs but let's be careful.

CC: stable@vger.kernel.org
Fixes: 9c2fc0deSigned-off-by: NJan Kara <jack@suse.cz>

The define is unused. Remove it.
Signed-off-by: NJan Kara <jack@suse.cz>

Use temporary mapping for memory copying operations.

To avoid any sleeping problem,

mark_inode_dirty(inode) was moved after kunmap() in
udf_adinicb_readpage()

down_write(&iinfo->i_data_sem) set before kmap_atomic()
in udf_expand_file_adinicb()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

According to commit f90774e1 ("checkpatch: look for symbolic
permissions and suggest octal instead")
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

 (1) Make the fields a consistent size on all arches and make them large.

 (2) Spare space, request flags and information flags are provided for
     future expansion.

 (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

 (4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

 (5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

 (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

 (7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

 (8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

 (9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

	int ret = statx(int dfd,
			const char *filename,
			unsigned int flags,
			unsigned int mask,
			struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

 (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

 (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

 (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

	struct statx_timestamp {
		__s64	tv_sec;
		__s32	tv_nsec;
		__s32	__reserved;
	};

	struct statx {
		__u32	stx_mask;
		__u32	stx_blksize;
		__u64	stx_attributes;
		__u32	stx_nlink;
		__u32	stx_uid;
		__u32	stx_gid;
		__u16	stx_mode;
		__u16	__spare0[1];
		__u64	stx_ino;
		__u64	stx_size;
		__u64	stx_blocks;
		__u64	__spare1[1];
		struct statx_timestamp	stx_atime;
		struct statx_timestamp	stx_btime;
		struct statx_timestamp	stx_ctime;
		struct statx_timestamp	stx_mtime;
		__u32	stx_rdev_major;
		__u32	stx_rdev_minor;
		__u32	stx_dev_major;
		__u32	stx_dev_minor;
		__u64	__spare2[14];
	};

The defined bits in request_mask and stx_mask are:

	STATX_TYPE		Want/got stx_mode & S_IFMT
	STATX_MODE		Want/got stx_mode & ~S_IFMT
	STATX_NLINK		Want/got stx_nlink
	STATX_UID		Want/got stx_uid
	STATX_GID		Want/got stx_gid
	STATX_ATIME		Want/got stx_atime{,_ns}
	STATX_MTIME		Want/got stx_mtime{,_ns}
	STATX_CTIME		Want/got stx_ctime{,_ns}
	STATX_INO		Want/got stx_ino
	STATX_SIZE		Want/got stx_size
	STATX_BLOCKS		Want/got stx_blocks
	STATX_BASIC_STATS	[The stuff in the normal stat struct]
	STATX_BTIME		Want/got stx_btime{,_ns}
	STATX_ALL		[All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

	STATX_ATTR_COMPRESSED		File is compressed by the fs
	STATX_ATTR_IMMUTABLE		File is marked immutable
	STATX_ATTR_APPEND		File is append-only
	STATX_ATTR_NODUMP		File is not to be dumped
	STATX_ATTR_ENCRYPTED		File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

	KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

	STATX_ATTR_AUTOMOUNT		Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

 (0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

 (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

 (2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

 (3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

	samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

	[root@andromeda ~]# /tmp/test-statx -A /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:26           Inode: 1703937     Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
	Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

	[root@andromeda ~]# /tmp/test-statx /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:27           Inode: 2           Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.

This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'

Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.

[geliangtang@gmail.com: truncate: use i_blocksize()]
  Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.beSigned-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"out" label was only returning error code.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently, lsattr for instance in udf directory gives
"udf: Invalid argument While reading flags on ..."

This patch returns -ENOIOCTLCMD
when command is unknown to have more accurate message like this:
"Inappropriate ioctl for device While reading flags on ..."
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

udf_fill_super() used udf_parse_options() to flag UDF_FLAG_BLOCKSIZE_SET
when blocksize was specified otherwise used 512 bytes
(bdev_logical_block_size) and 2048 bytes (UDF_DEFAULT_BLOCKSIZE)
IOW both 1024 and 4096 specifications were required or resulted in

"mount: wrong fs type, bad option, bad superblock on /dev/loop1"

This patch loops through different block values but also updates
udf_load_vrs() to return -EINVAL instead of 0 when udf_check_vsd()
fails (and uopt->novrs = 0).
The later being the reason for the RFC; we have that case when mounting
a 4kb blocksize against other values but maybe VRS is not mandatory
there ?

Tested with 512, 1024, 2048 and 4096 blocksize
Reported-by: NJan Kara <jack@suse.com>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

We were checking block number without checking partition.
sbi->s_partmaps[iloc->partitionReferenceNum] could lead to
bad memory access. See udf_nfs_get_inode() path for instance.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

See i_size_read() comments in include/linux/fs.h
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Move all module attributes at the end of one file like other FS.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

udf_update_extent_cache() is only called from inode_bmap()
with 1 for next_epos
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Factor out trimming of crtime field.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

loc & 0x02 is empty since first git version in 2005 in
udf_add_extendedattr()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Merge all bh free at one place.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

Having struct kernel_long_ad laarr[EXTENT_MERGE_SIZE]
in all function arguments could be understood as by-value parameter.
Use kernel_long_ad pointer for functions depending on
inode_getblk()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

defined in linux/compiler-gcc.h
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NJan Kara <jack@suse.cz>

UDF encodes symlinks in a more complex fashion and thus i_size of a
symlink does not match the lenght of a string returned by readlink(2).
This confuses some applications (see bug 191241) and may be considered a
violation of POSIX. Fix the problem by reading the link into page cache
in response to stat(2) call and report the length of the decoded path.
Signed-off-by: NJan Kara <jack@suse.cz>

Signed-off-by: NSteve Kenton <skenton@ou.edu>
Signed-off-by: NJan Kara <jack@suse.cz>

CURRENT_TIME is not y2038 safe.

CURRENT_TIME macro is also not appropriate for filesystems
as it doesn't use the right granularity for filesystem
timestamps.

Logical Volume Integrity format is described to have the
same timestamp format for "Recording Date and time" as
the other [a,c,m]timestamps.
The function udf_time_to_disk_format() does this conversion.
Hence the timestamp is passed directly to the function and
not truncated. This is as per Arnd's suggestion on the
thread.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Nothing in fs.h should require blk_types.h to be included.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.

Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Generated patch:

sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2`
sed -i "s/\brename2\b/rename/g" `git grep -wl rename2`
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is trivial to do:

 - add flags argument to foo_rename()
 - check if flags doesn't have any other than RENAME_NOREPLACE
 - assign foo_rename() to .rename2 instead of .rename

Filesystems converted:

affs, bfs, exofs, ext2, hfs, hfsplus, jffs2, jfs, logfs, minix, msdos,
nilfs2, omfs, reiserfs, sysvfs, ubifs, udf, ufs, vfat.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Acked-by: NBoaz Harrosh <ooo@electrozaur.com>
Acked-by: NRichard Weinberger <richard@nod.at>
Acked-by: NBob Copeland <me@bobcopeland.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>

inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

... it would get converted to regular if such had been attempted
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJan Kara <jack@suse.cz>