match_int() used in mount option parsing can allocate memory using
GFP_KERNEL and thus sleep. Avoid parsing mount options with sbi->s_lock
held.
Signed-off-by: NJan Kara <jack@suse.cz>

Instead of parsing mount options directly into the superblock (and
restoring options in case of error), parse the options into a dedicated
structure and only copy everything when we know we can safely switch
options. This will allow us to simplify locking and do option parsing
without holding sb->s_lock.
Signed-off-by: NJan Kara <jack@suse.cz>

When servicing mmap() reads from file holes the current DAX code
allocates a page cache page of all zeroes and places the struct page
pointer in the mapping->page_tree radix tree.

This has three major drawbacks:

1) It consumes memory unnecessarily. For every 4k page that is read via
   a DAX mmap() over a hole, we allocate a new page cache page. This
   means that if you read 1GiB worth of pages, you end up using 1GiB of
   zeroed memory. This is easily visible by looking at the overall
   memory consumption of the system or by looking at /proc/[pid]/smaps:

	7f62e72b3000-7f63272b3000 rw-s 00000000 103:00 12   /root/dax/data
	Size:            1048576 kB
	Rss:             1048576 kB
	Pss:             1048576 kB
	Shared_Clean:          0 kB
	Shared_Dirty:          0 kB
	Private_Clean:   1048576 kB
	Private_Dirty:         0 kB
	Referenced:      1048576 kB
	Anonymous:             0 kB
	LazyFree:              0 kB
	AnonHugePages:         0 kB
	ShmemPmdMapped:        0 kB
	Shared_Hugetlb:        0 kB
	Private_Hugetlb:       0 kB
	Swap:                  0 kB
	SwapPss:               0 kB
	KernelPageSize:        4 kB
	MMUPageSize:           4 kB
	Locked:                0 kB

2) It is slower than using a common zero page because each page fault
   has more work to do. Instead of just inserting a common zero page we
   have to allocate a page cache page, zero it, and then insert it. Here
   are the average latencies of dax_load_hole() as measured by ftrace on
   a random test box:

    Old method, using zeroed page cache pages:	3.4 us
    New method, using the common 4k zero page:	0.8 us

   This was the average latency over 1 GiB of sequential reads done by
   this simple fio script:

     [global]
     size=1G
     filename=/root/dax/data
     fallocate=none
     [io]
     rw=read
     ioengine=mmap

3) The fact that we had to check for both DAX exceptional entries and
   for page cache pages in the radix tree made the DAX code more
   complex.

Solve these issues by following the lead of the DAX PMD code and using a
common 4k zero page instead.  As with the PMD code we will now insert a
DAX exceptional entry into the radix tree instead of a struct page
pointer which allows us to remove all the special casing in the DAX
code.

Note that we do still pretty aggressively check for regular pages in the
DAX radix tree, especially where we take action based on the bits set in
the page.  If we ever find a regular page in our radix tree now that
most likely means that someone besides DAX is inserting pages (which has
happened lots of times in the past), and we want to find that out early
and fail loudly.

This solution also removes the extra memory consumption.  Here is that
same /proc/[pid]/smaps after 1GiB of reading from a hole with the new
code:

	7f2054a74000-7f2094a74000 rw-s 00000000 103:00 12   /root/dax/data
	Size:            1048576 kB
	Rss:                   0 kB
	Pss:                   0 kB
	Shared_Clean:          0 kB
	Shared_Dirty:          0 kB
	Private_Clean:         0 kB
	Private_Dirty:         0 kB
	Referenced:            0 kB
	Anonymous:             0 kB
	LazyFree:              0 kB
	AnonHugePages:         0 kB
	ShmemPmdMapped:        0 kB
	Shared_Hugetlb:        0 kB
	Private_Hugetlb:       0 kB
	Swap:                  0 kB
	SwapPss:               0 kB
	KernelPageSize:        4 kB
	MMUPageSize:           4 kB
	Locked:                0 kB

Overall system memory consumption is similarly improved.

Another major change is that we remove dax_pfn_mkwrite() from our fault
flow, and instead rely on the page fault itself to make the PTE dirty
and writeable.  The following description from the patch adding the
vm_insert_mixed_mkwrite() call explains this a little more:

   "To be able to use the common 4k zero page in DAX we need to have our
    PTE fault path look more like our PMD fault path where a PTE entry
    can be marked as dirty and writeable as it is first inserted rather
    than waiting for a follow-up dax_pfn_mkwrite() =>
    finish_mkwrite_fault() call.

    Right now we can rely on having a dax_pfn_mkwrite() call because we
    can distinguish between these two cases in do_wp_page():

            case 1: 4k zero page => writable DAX storage
            case 2: read-only DAX storage => writeable DAX storage

    This distinction is made by via vm_normal_page(). vm_normal_page()
    returns false for the common 4k zero page, though, just as it does
    for DAX ptes. Instead of special casing the DAX + 4k zero page case
    we will simplify our DAX PTE page fault sequence so that it matches
    our DAX PMD sequence, and get rid of the dax_pfn_mkwrite() helper.
    We will instead use dax_iomap_fault() to handle write-protection
    faults.

    This means that insert_pfn() needs to follow the lead of
    insert_pfn_pmd() and allow us to pass in a 'mkwrite' flag. If
    'mkwrite' is set insert_pfn() will do the work that was previously
    done by wp_page_reuse() as part of the dax_pfn_mkwrite() call path"

Link: http://lkml.kernel.org/r/20170724170616.25810-4-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Reviewed-by: NJan Kara <jack@suse.cz>
Reported-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

When changing a file's acl mask, ext2_set_acl() will first set the group
bits of i_mode to the value of the mask, and only then set the actual
extended attribute representing the new acl.

If the second part fails (due to lack of space, for example) and the file
had no acl attribute to begin with, the system will from now on assume
that the mask permission bits are actual group permission bits, potentially
granting access to the wrong users.

Prevent this by only changing the inode mode after the acl has been set.

[JK: Rebased on top of "ext2: Don't clear SGID when inheriting ACLs"]
Signed-off-by: NErnesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.

Fix the problem by creating __ext2_set_acl() function that does not call
posix_acl_update_mode() and use it when inheriting ACLs. That prevents
SGID bit clearing and the mode has been properly set by
posix_acl_create() anyway.

Fixes: 07393101
CC: stable@vger.kernel.org
CC: linux-ext4@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>

Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Buffer heads referencing indirect blocks may not be released if the file
is truncated at the right time. This happens because ext2_get_branch()
returns NULL when it finds the whole chain of indirect blocks already
set, and when truncate alters the chain this value of NULL is
treated as the address of the last head to be released. Handle this in the
same way as it's done after the got_it label.
Signed-off-by: NErnesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

ext2 currently does a test+clear of the AS_EIO flag, which is
is problematic for some coming changes.

What we really need to do instead is call filemap_check_errors
in __generic_file_fsync after syncing out the buffers. That
will be sufficient for this case, and help other callers detect
these errors properly as well.

With that, we don't need to twiddle it in ext2.
Suggested-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com>

The callers all set it to 1.

Also, make it clear that this function will not set any sort of AS_*
error, and that the caller must do so if necessary.  No existing caller
uses this on normal files, so none of them need it.

Also, add __must_check here since, in general, the callers need to handle
an error here in some fashion.

Link: http://lkml.kernel.org/r/20170525103303.6524-1-jlayton@redhat.comSigned-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

There will be a second mb_cache instance that tracks ea_inodes. Make
existing names more explicit so that it is clear that they refer to
xattr block cache.
Signed-off-by: NTahsin Erdogan <tahsin@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Make names more generic so that mbcache usage is not limited to
block sharing. In a subsequent patch in the series
("ext4: xattr inode deduplication"), we start using the mbcache code
for sharing xattr inodes. With that patch, old mb_cache_entry.e_block
field could be holding either a block number or an inode number.
Signed-off-by: NTahsin Erdogan <tahsin@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Tetsuo reports:

  fs/built-in.o: In function `xfs_file_iomap_end':
  xfs_iomap.c:(.text+0xe0ef9): undefined reference to `put_dax'
  fs/built-in.o: In function `xfs_file_iomap_begin':
  xfs_iomap.c:(.text+0xe1a7f): undefined reference to `dax_get_by_host'
  make: *** [vmlinux] Error 1
  $ grep DAX .config
  CONFIG_DAX=m
  # CONFIG_DEV_DAX is not set
  # CONFIG_FS_DAX is not set

When FS_DAX=n we can/must throw away the dax code in filesystems.
Implement 'fs_' versions of dax_get_by_host() and put_dax() that are
nops in the FS_DAX=n case.

Cc: <linux-xfs@vger.kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: NTony Luck <tony.luck@intel.com>
Fixes: ef510424 ("block, dax: move 'select DAX' from BLOCK to FS_DAX")
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

For configurations that do not enable DAX filesystems or drivers, do not
require the DAX core to be built.

Given that the 'direct_access' method has been removed from
'block_device_operations', we can also go ahead and remove the
block-related dax helper functions from fs/block_dev.c to
drivers/dax/super.c. This keeps dax details out of the block layer and
lets the DAX core be built as a module in the FS_DAX=n case.

Filesystems need to include dax.h to call bdev_dax_supported().

Cc: linux-xfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.com>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

In preparation for converting fs/dax.c to use dax_direct_access()
instead of bdev_direct_access(), add the plumbing to retrieve the
dax_device associated with a given block_device.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Now that all places setting inode->i_flags that should be reflected in
on-disk flags are gone, we can remove ext2_get_inode_flags() call.
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently immutable and noatime flags on quota files are set by quota
code which requires us to copy inode->i_flags to our on disk version of
quota flags in GETFLAGS ioctl and __ext2_write_inode().  Move to setting
/ clearing these on-disk flags directly to save that copying.
Signed-off-by: NJan Kara <jack@suse.cz>

ext2_sync_fs() could be called without s_umount semaphore held when
called through ext2_write_super() from __ext2_write_inode(). This
function then calls dquot_writeback_dquots() which relies on s_umount to
be held for protection against other quota operations.

In fact __ext2_write_inode() does not need all the functionality
ext2_write_super() provides. It is enough to just write the superblock.
So use ext2_sync_super() instead.

Fixes: 9d1ccbe7Reported-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has
been somewhat painful with getting the flags set and removed at the
correct locations.  More than one kernel oops was introduced due to
difficulties of getting the placement correctly.

Remove the flag values and introduce an input parameter to huge_fault
that indicates the size of the page entry.  This makes the code easier
to trace and should avoid the issues we see with the fault flags where
removal of the flag was necessary in the fallback paths.

Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NDave Jiang <dave.jiang@intel.com>
Tested-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "1G transparent hugepage support for device dax", v2.

The following series implements support for 1G trasparent hugepage on
x86 for device dax.  The bulk of the code was written by Mathew Wilcox a
while back supporting transparent 1G hugepage for fs DAX.  I have
forward ported the relevant bits to 4.10-rc.  The current submission has
only the necessary code to support device DAX.

Comments from Dan Williams: So the motivation and intended user of this
functionality mirrors the motivation and users of 1GB page support in
hugetlbfs.  Given expected capacities of persistent memory devices an
in-memory database may want to reduce tlb pressure beyond what they can
already achieve with 2MB mappings of a device-dax file.  We have
customer feedback to that effect as Willy mentioned in his previous
version of these patches [1].

[1]: https://lkml.org/lkml/2016/1/31/52

Comments from Nilesh @ Oracle:

There are applications which have a process model; and if you assume
10,000 processes attempting to mmap all the 6TB memory available on a
server; we are looking at the following:

processes         : 10,000
memory            :    6TB
pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB
pmd @ 2M page size: 120,000 / 512 = ~240GB
pud @ 1G page size: 240GB / 512 = ~480MB

As you can see with 2M pages, this system will use up an exorbitant
amount of DRAM to hold the page tables; but the 1G pages finally brings
it down to a reasonable level.  Memory sizes will keep increasing; so
this number will keep increasing.

An argument can be made to convert the applications from process model
to thread model, but in the real world that may not be always practical.
Hopefully this helps explain the use case where this is valuable.

This patch (of 3):

In preparation for adding the ability to handle PUD pages, convert
vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault.  The
vm_fault structure is extended to include a union of the different page
table pointers that may be needed, and three flag bits are reserved to
indicate which type of pointer is in the union.

[ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()]
  Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com
[dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path]
  Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

As reported by Arnd:

  https://lkml.org/lkml/2017/1/10/756

Compiling with the following configuration:

  # CONFIG_EXT2_FS is not set
  # CONFIG_EXT4_FS is not set
  # CONFIG_XFS_FS is not set
  # CONFIG_FS_IOMAP depends on the above filesystems, as is not set
  CONFIG_FS_DAX=y

generates build warnings about unused functions in fs/dax.c:

  fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function]
   static int dax_insert_mapping(struct address_space *mapping,
              ^~~~~~~~~~~~~~~~~~
  fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function]
   static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size,
              ^~~~~~~~~~~~~
  fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function]
   static int dax_load_hole(struct address_space *mapping, void **entry,
              ^~~~~~~~~~~~~
  fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function]
   static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index,
                ^~~~~~~~~~~~~~~~~~

Now that the struct buffer_head based DAX fault paths and I/O path have
been removed we really depend on iomap support being present for DAX.
Make this explicit by selecting FS_IOMAP if we compile in DAX support.

This allows us to remove conditional selections of FS_IOMAP when FS_DAX
was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c.

Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reported-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So far we did not return BH_New buffers from ext2_get_blocks() when we
allocated and zeroed-out a block for DAX inode to avoid racy zeroing in
DAX code. This zeroing is gone these days so we can remove the
workaround.
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If .readlink == NULL implies generic_readlink().

Generated by:

to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Don't load an inode with a negative size; this causes integer overflow
problems in the VFS.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently the last user of ext2_get_blocks() for DAX inodes was
dax_truncate_page(). Convert that to iomap_zero_range() so that all DAX
IO uses the iomap path.
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The recently added DAX functions that use the new struct iomap data
structure were named iomap_dax_rw(), iomap_dax_fault() and
iomap_dax_actor().  These are actually defined in fs/dax.c, though, so
should be part of the "dax" namespace and not the "iomap" namespace.
Rename them to dax_iomap_rw(), dax_iomap_fault() and dax_iomap_actor()
respectively.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDave Chinner <david@fromorbit.com>

DAX PMD support was added via the following commit:

commit e7b1ea2a ("ext2: huge page fault support")

I believe this path to be untested as ext2 doesn't reliably provide block
allocations that are aligned to 2MiB.  In my testing I've been unable to
get ext2 to actually fault in a PMD.  It always fails with a "pfn
unaligned" message because the sector returned by ext2_get_block() isn't
aligned.

I've tried various settings for the "stride" and "stripe_width" extended
options to mkfs.ext2, without any luck.

Since we can't reliably get PMDs, remove support so that we don't have an
untested code path that we may someday traverse when we happen to get an
aligned block allocation.  This should also make 4k DAX faults in ext2 a
bit faster since they will no longer have to call the PMD fault handler
only to get a response of VM_FAULT_FALLBACK.
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Use clean_bdev_aliases() instead of iterating through blocks one by one.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

On ARM, we get this false-positive warning since the rework of
the ext2_get_blocks interface:

fs/ext2/inode.c: In function 'ext2_get_block':
include/linux/buffer_head.h:340:16: error: 'bno' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The calling conventions for this function are rather complex, and it's
not surprising that the compiler gets this wrong, I spent a long time
trying to understand how it all fits together myself.

This change to avoid the warning makes sure the compiler sees that we
always set 'bno' pointer whenever we have a positive return code.
The transformation is correct because we always arrive at the 'got_it'
label with a positive count that gets used as the return value, while
any branch to the 'cleanup' label has a negative or zero 'err'.

Fixes: 6750ad71 ("ext2: stop passing buffer_head to ext2_get_blocks")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: NJan Kara <jack@suse.cz>

These inode operations are no longer used; remove them.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

To support DAX pmd mappings with unmodified applications, filesystems
need to align an mmap address by the pmd size.

Call thp_get_unmapped_area() from f_op->get_unmapped_area.

Note, there is no change in behavior for a non-DAX file.

Link: http://lkml.kernel.org/r/1472497881-9323-3-git-send-email-toshi.kani@hpe.comSigned-off-by: NToshi Kani <toshi.kani@hpe.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For 32-bit architectures we need to cast first_block to u64 before
shifting it left.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

CURRENT_TIME_SEC is not y2038 safe. current_time() will
be transitioned to use 64 bit time along with vfs in a
separate patch.
There is no plan to transistion CURRENT_TIME_SEC to use
y2038 safe time interfaces.

current_time() will also be extended to use superblock
range checking parameters when range checking is introduced.

This works because alloc_super() fills in the the s_time_gran
in super block to NSEC_PER_SEC.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.

CURRENT_TIME is also not y2038 safe.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.

Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NFelipe Balbi <balbi@kernel.org>
Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When zeroing blocks for DAX allocations, we also have to unmap aliases
in the block device mappings. Otherwise writeback can overwrite zeros
with stale data from block device page cache.
Signed-off-by: NJan Kara <jack@suse.cz>

Generated patch:

sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2`
sed -i "s/\brename2\b/rename/g" `git grep -wl rename2`
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>