- 11 5月, 2011 1 次提交
-
-
由 Rafał Miłecki 提交于
Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 4月, 2011 1 次提交
-
-
由 Christian Lamparter 提交于
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 4月, 2011 1 次提交
-
-
由 Stanislaw Gruszka 提交于
Add iwlegacy driver to MAINTAINERS. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 3月, 2011 3 次提交
-
-
由 Corentin Chary 提交于
Introduce a new driver for Asus Notebooks shipped with a WMI device instead of the old ACPI device. The WMI device is almost the same as the one present in Eee PC, but the event guid and the keymap are different. The keymap comes from asus-laptop module. On Asus notebooks, when you call the WMI device, you always need a 64bit buffer, even if you only want to get the state of a device (tested on a G73). Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Stephen Rothwell 提交于
I no longer have access to any hardware that uses APM and have not provided real maintenance for several years. Hopefully someone with the hardware or energy will step forward if the driver is to be kept. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Weinberger 提交于
Signed-off-by: NRichard Weinberger <richard@nod.at> Acked-and-appreciated-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 3月, 2011 1 次提交
-
-
由 Maxim Levitsky 提交于
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Acked-by: NAlex Dubov <oakad@yahoo.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 3月, 2011 1 次提交
-
-
由 Wey-Yi Guy 提交于
Add iwlegacy driver to MAINTAINERS file and mark as 'Orphan' Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 23 3月, 2011 19 次提交
-
-
由 Kenneth Heitke 提交于
Signed-off-by: NKenneth Heitke <kheitke@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
commit 5b2e303f ("[media] rc-core: convert winbond-cir") moved the files, update the pattern. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NDavid Härdeman <david@hardeman.nu> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
And set the status to Orphan. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Jeroen Vreeken <pe1rxq@amsat.org> Cc: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
commit 937f961a ("x86: Move sfi to platform") moved the files, update the pattern. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
commit 82e6923e ("ARM: lh7a40x: remove unmaintained platform support") removed support, remove it from MAINTAINERS. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
commit 3b3da9d2 ("x86: Move scx200 to platform") moved it, convert the pattern too. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 88606e80 ("MAINTAINERS: Update timer related entries") added a file pattern that didn't actually exist. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
commit 66fa12c5 ("ieee1394: remove the old IEEE 1394 driver stack") removed the code, remove the MAINTAINERS entry. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 52b66144 ("[media] rc: Rename remote controller type to rc_type instead of ir_type") moved it around. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Commit 6d803ba7 ("ARM: 6483/1: arm & sh: factorised duplicated clkdev.c") moved it to a separate directory. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
CC'ing lkml is the default and doesn't need separate entries. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Remove these patterns until such files are actually in the tree. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
wiki-analog doesn't seem to work, but wiki.analog does. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Typo in path. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Add quotes around email address with periods and commas. So they don't explode when pasted into certain email clients. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NHarry Wei <harryxiyou@gmail.com> Cc: "Mark F. Brown" <mark.brown314@gmail.com> Cc: "Gustavo F. Padovan" <padovan@profusion.mobi> Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com> Cc: "Lee, Chun-Yi" <jlee@novell.com> Acked-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harry Wei 提交于
At least one tree: ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) is available via topgit. Add mention of topgit in the MAINTAINERS description section. Signed-off-by: NHarry Wei <harryxiyou@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Mundt 提交于
It's been a few kernel versions now without any unexpected surprises, so tentatively bump up the support status. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that Documentation/devicetree/bindings/fb/ exists, make sure it's also matched by the default framebuffer entry. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 3月, 2011 5 次提交
-
-
由 Laurent Pinchart 提交于
Add the OMAP3 ISP driver to the kernel build system. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
SMSC SCH5627 Super I/O chips include complete hardware monitoring capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. The hardware monitoring part of the SMSC SCH5627 is accessed by talking through an embedded microcontroller. An application note describing the protocol for communicating with the microcontroller is available upon request. Please mail me if you want a copy. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't belong to drivers/hwmon. Move them to drivers/misc, short of a better home. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Tested-by: NEric Piel <eric.piel@tremplin-utc.net> Tested-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 3月, 2011 1 次提交
-
-
由 Alan Cox 提交于
Add an entry for serial maintainers. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 3月, 2011 3 次提交
-
-
由 GuanXuetao 提交于
change from original version -- by advice of Paul Mundt 1. remove videomemorysize definitions 2. remove unifb_enable and unifb_setup 3. use dev_warn instead of printk in fb driver 4. remove judgement for FB_ACCEL_PUV3_UNIGFX 5. adjust clk_get and clk_set_rate calls 6. add resources definitions 7. remove unifb_option 8. adjust register for platform_device 9. adjust unifb_ops position and unifb_regs assignment position Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
change from original version -- by advice of Jean Delvare 1. remove global variable i2c_reg, replaced by local variables 2. replace ENXIO with ENODEV when no platform resources 3. add adapter->nr assignment before i2c_add_numbered_adapter() call 4. add judgement for i2c_del_adapter() return value 5. release adapter when driver removed 6. add __devexit for puv3_i2c_remove() function 7. modify several names to more appropriated ones Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 GuanXuetao 提交于
Add MAINTAINER list for unicore32 architecture and pkunity soc drivers. Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 14 3月, 2011 2 次提交
-
-
由 Viresh Kumar 提交于
The Arasan CompactFlash Device Controller has three basic modes of operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card ATA using true IDE modes. Currently driver supports only True IDE mode. Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Allan Stephens 提交于
Updates TIPC maintenance information to reflect changes that have taken place during TIPC 2.0 development, including: - removal of directories that have been deleted - removal of websites that have been decommisioned - removal of sidestream SCM repositories that are no longer used - addition of netdev as appropriate list for kernel code. Grateful acknowledgement is given to Joe Perches <joe@perches.com>, who reported the stale file entry that triggered the update. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 11 3月, 2011 2 次提交
-
-
由 Tomi Valkeinen 提交于
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Chris Metcalf 提交于
Add tile support for the EDAC driver, which provides unified system error (memory, PCI, etc.) reporting. For now, the TILEPro port reports memory correctable error (CE) only. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-