- 12 6月, 2015 3 次提交
-
-
由 John Stultz 提交于
Currently, leapsecond adjustments are done at tick time. As a result, the leapsecond was applied at the first timer tick *after* the leapsecond (~1-10ms late depending on HZ), rather then exactly on the second edge. This was in part historical from back when we were always tick based, but correcting this since has been avoided since it adds extra conditional checks in the gettime fastpath, which has performance overhead. However, it was recently pointed out that ABS_TIME CLOCK_REALTIME timers set for right after the leapsecond could fire a second early, since some timers may be expired before we trigger the timekeeping timer, which then applies the leapsecond. This isn't quite as bad as it sounds, since behaviorally it is similar to what is possible w/ ntpd made leapsecond adjustments done w/o using the kernel discipline. Where due to latencies, timers may fire just prior to the settimeofday call. (Also, one should note that all applications using CLOCK_REALTIME timers should always be careful, since they are prone to quirks from settimeofday() disturbances.) However, the purpose of having the kernel do the leap adjustment is to avoid such latencies, so I think this is worth fixing. So in order to properly keep those timers from firing a second early, this patch modifies the ntp and timekeeping logic so that we keep enough state so that the update_base_offsets_now accessor, which provides the hrtimer core the current time, can check and apply the leapsecond adjustment on the second edge. This prevents the hrtimer core from expiring timers too early. This patch does not modify any other time read path, so no additional overhead is incurred. However, this also means that the leap-second continues to be applied at tick time for all other read-paths. Apologies to Richard Cochran, who pushed for similar changes years ago, which I resisted due to the concerns about the performance overhead. While I suspect this isn't extremely critical, folks who care about strict leap-second correctness will likely want to watch this. Potentially a -stable candidate eventually. Originally-suggested-by: NRichard Cochran <richardcochran@gmail.com> Reported-by: NDaniel Bristot de Oliveira <bristot@redhat.com> Reported-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-4-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 John Stultz 提交于
Currently the leapsecond logic uses what looks like magic values. Improve this by defining SECS_PER_DAY and using that macro to make the logic more clear. Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1434063297-28657-3-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 John Stultz 提交于
It was reported that 868a3e91 (hrtimer: Make offset update smarter) was causing timer problems after suspend/resume. The problem with that change is the modification to clock_was_set_seq in timekeeping_update is done prior to mirroring the time state to the shadow-timekeeper. Thus the next time we do update_wall_time() the updated sequence is overwritten by whats in the shadow copy. This patch moves the shadow-timekeeper mirroring to the end of the function, after all updates have been made, so all data is kept in sync. (This patch also affects the update_fast_timekeeper calls which were also problematically done prior to the mirroring). Reported-and-tested-by: NJeremiah Mahler <jmmahler@gmail.com> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1434063297-28657-2-git-send-email-john.stultz@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 6月, 2015 3 次提交
-
-
由 Joe Perches 提交于
clocksource messages aren't prefixed in dmesg so it's a bit unclear what subsystem emits the messages. Use pr_fmt and pr_<level> to auto-prefix the messages appropriately. Miscellanea: o Remove "Warning" from KERN_WARNING level messages o Align "timekeeping watchdog: " messages o Coalesce formats o Align multiline arguments Signed-off-by: NJoe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1432579795.2846.75.camel@perches.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Nicholas Mc Guire 提交于
To allow constant folding in usecs_to_jiffies() conditionally calls the HZ dependent _usecs_to_jiffies() helpers or, when gcc can not figure out constant folding, __usecs_to_jiffies, which is the renamed original usecs_to_jiffies() function. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Hunter <ahh@google.com> Cc: Paul Turner <pjt@google.com> Cc: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1432832996-12129-2-git-send-email-hofrat@osadl.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Nicholas Mc Guire 提交于
Refactor the usecs_to_jiffies conditional code part in time.c and jiffies.h putting it into conditional functions rather than #ifdefs to improve readability. This is analogous to the msecs_to_jiffies() cleanup in commit ca42aaf0 ("time: Refactor msecs_to_jiffies") Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Hunter <ahh@google.com> Cc: Paul Turner <pjt@google.com> Cc: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1432832996-12129-1-git-send-email-hofrat@osadl.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 08 6月, 2015 1 次提交
-
-
由 Borislav Petkov 提交于
... in the !CONFIG_HIGH_RES_TIMERS case too. And thus fix warnings like this one: net/sched/sch_api.c: In function ‘psched_show’: net/sched/sch_api.c:1891:6: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘long int’ [-Wformat=] (u32)NSEC_PER_SEC / hrtimer_resolution); Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1433583000-32090-1-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de>
-
- 02 6月, 2015 17 次提交
-
-
由 Thomas Gleixner 提交于
Merge branch 'clockevents/4.2' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clockevents/clocksource changes from Daniel Lezcano: - Removed dead code in the files related to mach-msm for qcom (Stephen Boyd) - Cleaned up code for exynos_mct (Krzysztof Kozlowski) - Added the new timer lpc3220 (Joachim Eastwood) - Added the new timer STM32 and ARM system timer (Maxime Coquelin)
-
由 Thomas Gleixner 提交于
The only sensible way to make abuse of core internal fields obvious and easy to grep for. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>
-
由 Thomas Gleixner 提交于
We want to rename dev->state, so provide proper get and set functions. Rename clockevents_set_state() to clockevents_switch_state() to avoid confusion. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org>
-
由 Viresh Kumar 提交于
Use accessor functions to check the state of clockevent devices in core code. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/fa2b9869fd17f210eaa156ec2b594efd0230b6c7.1432192527.git.viresh.kumar@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Viresh Kumar 提交于
Some clockevent drivers, once migrated to use per-state callbacks, need to check the state of the clockevent device in their callbacks or interrupt handler. Add accessor functions clockevent_state_*() to get this information. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/04a717d490335c688dd7af899fbcede97e1bb8ee.1432192527.git.viresh.kumar@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Maxime Coquelin 提交于
This patch fixes below warning spotted by kbuild test robot when building with ARCH=powerpc: drivers/clocksource/timer-stm32.c: In function 'stm32_clockevent_init': >> drivers/clocksource/timer-stm32.c:140:9: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~0UL, data->base + TIM_ARR); The fix consists in using 0U instead of 0UL. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Maxime Coquelin 提交于
STM32 MCUs feature 16 and 32 bits general purpose timers with prescalers. The drivers detects whether the time is 16 or 32 bits, and applies a 1024 prescaler value if it is 16 bits. Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Tested-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Maxime Coquelin 提交于
This adds documentation of device tree bindings for the STM32 timer. Tested-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Maxime Coquelin 提交于
This patch adds clocksource support for ARMv7-M's System timer, also known as SysTick. Tested-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Maxime Coquelin 提交于
This adds documentation of device tree bindings for the ARM System timer. Tested-by: NChanwoo Choi <cw00.choi@samsung.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Joachim Eastwood 提交于
Add DT bindings documentation for lpc3220-timer. This timer is used as clocksource on many NXP platforms. Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Joachim Eastwood 提交于
Add support for using the NXP LPC timer as clocksource and clock event. These timers are present on many NXP devices including LPC32xx, LPC17xx, LPC18xx and LPC43xx. The timer has a 32-bit timer counter register with a programmable 32-bit prescaler. It supports up to 4 compare match values with interrupt generation and reset/stop timer counter action. Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Krzysztof Kozlowski 提交于
Since commit 228e3023 ("Merge tag 'mct-exynos-for-v3.10' of ...") the mct_init() was superseded by mct_init_dt() and is not referenced anywhere. Remove it. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Krzysztof Kozlowski 提交于
The struct clocksource 'mct_frc' is not exported and used outside so make it static. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Krzysztof Kozlowski 提交于
Return value of exynos4_mct_tick_clear() was never checked so it can be safely changed to void. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
由 Stephen Boyd 提交于
This code is no longer used now that mach-msm has been removed. Delete it. Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
-
- 27 5月, 2015 1 次提交
-
-
由 Alexandre Belloni 提交于
There is no point in calling suspend/resume for unused clockevents as they are already stopped and disabled. This is really important for AT91 as the hardware is a trainwreck and takes ages to synchronize. Reported-by: NSylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1421399151-26800-1-git-send-email-alexandre.belloni@free-electrons.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 23 5月, 2015 7 次提交
-
-
由 Xunlei Pang 提交于
Now that we have a read_boot_clock64() function available on every architecture, and converted all the users to it, it's time to remove the (now unused) read_boot_clock() completely from the kernel. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NXunlei Pang <pang.xunlei@linaro.org> [jstultz: Minor commit message tweak suggested by Ingo] Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Xunlei Pang 提交于
As part of addressing the "y2038 problem" for in-kernel uses, this patch converts read_boot_clock() to read_boot_clock64() and read_persistent_clock() to read_persistent_clock64() using timespec64. Rename some instances of 'timespec' to 'timespec64' in time.c and related references Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: NXunlei Pang <pang.xunlei@linaro.org> [jstultz: Fixed minor style and grammer tweaks pointed out by Ingo] Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Xunlei Pang 提交于
On 32-bit systems, timespec64_add_ns() calls __iter_div_u64_rem() which needs math64.h, and we want to include time64.h in some cases. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NXunlei Pang <pang.xunlei@linaro.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Badhri Jagan Sridharan 提交于
The timer_start event now shows whether the timer is deferrable in case of a low-res timer. The debug_activate function now includes a deferrable flag while calling the trace_timer_start event. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NBadhri Jagan Sridharan <Badhri@google.com> [jstultz: Fixed minor whitespace and grammer tweaks pointed out by Ingo] Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 John Stultz 提交于
Ingo suggested that the timekeeping debugging variables recently added should not be global, and should be tied to the timekeeper's read_base. Thus this patch implements that suggestion. This version is different from the earlier versions as it keeps the variables in the timekeeper structure rather then in the tkr. Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Harald Geyer 提交于
This patch series introduces a new function u32 ktime_get_resolution_ns(void) which allows to clean up some driver code. In particular the IIO subsystem has a function to provide timestamps for events but no means to get their resolution. So currently the dht11 driver tries to guess the resolution in a rather messy and convoluted way. We can do much better with the new code. This API is not designed to be exposed to user space. This has been tested on i386, sunxi and mxs. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NHarald Geyer <harald@ccbib.org> [jstultz: Tweaked to make it build after upstream changes] Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Sasha Levin 提交于
Invalid values may overflow later, leading to undefined behaviour when multiplied by 60 to get the amount of seconds. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
- 19 5月, 2015 8 次提交
-
-
由 Thomas Gleixner 提交于
Somehow I missed to clean that up when applying the patches. Fix it up now. Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Nicholas Mc Guire <der.herr@hofr.at>
-
由 Viresh Kumar 提交于
To avoid getting spurious interrupts on a tickless CPU, clockevent device can now be stopped by switching to ONESHOT_STOPPED state. The natural place for handling this transition is tick_program_event(). On 'expires == KTIME_MAX', we skip programming the event and so we need to fix such call sites as well, to always call tick_program_event() irrespective of the expires value. Once the clockevent device is required again, check if it was earlier put into ONESHOT_STOPPED state. If yes, switch its state to ONESHOT before programming its event. To make sure we haven't missed any corner case, add a WARN() for the case where we try to reprogram clockevent device while we aren't configured in ONESHOT_STOPPED state. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5146b07be7f0bc497e0ebae036590ec2fa73e540.1428031396.git.viresh.kumar@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Viresh Kumar 提交于
When no timers/hrtimers are pending, the expiry time is set to a special value: 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. When 'expiry == KTIME_MAX', we either cancel the 'tick-sched' hrtimer (NOHZ_MODE_HIGHRES) or skip reprogramming clockevent device (NOHZ_MODE_LOWRES). But, the clockevent device is already reprogrammed from the tick-handler for next tick. As the clock event device is programmed in ONESHOT mode it will at least fire one more time (unnecessarily). Timers on few implementations (like arm_arch_timer, etc.) only support PERIODIC mode and their drivers emulate ONESHOT over that. Which means that on these platforms we will get spurious interrupts periodically (at last programmed interval rate, normally tick rate). In order to avoid spurious interrupts, the clockevent device should be stopped or its interrupts should be masked. A simple (yet hacky) solution to get this fixed could be: update hrtimer_force_reprogram() to always reprogram clockevent device and update clockevent drivers to STOP generating events (or delay it to max time) when 'expires' is set to KTIME_MAX. But the drawback here is that every clockevent driver has to be hacked for this particular case and its very easy for new ones to miss this. However, Thomas suggested to add an optional state ONESHOT_STOPPED to solve this problem: lkml.org/lkml/2014/5/9/508. This patch adds support for ONESHOT_STOPPED state in clockevents core. It will only be available to drivers that implement the state-specific callbacks instead of the legacy ->set_mode() callback. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Reviewed-by: NPreeti U. Murthy <preeti@linux.vnet.ibm.com> Cc: linaro-kernel@lists.linaro.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/b8b383a03ac07b13312c16850b5106b82e4245b5.1428031396.git.viresh.kumar@linaro.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Make sure the upstream fixes are applied before adding further modifications.
-
由 Nicholas Mc Guire 提交于
To allow constant folding in msecs_to_jiffies() conditionally calls the HZ dependent _msecs_to_jiffies() helpers or, when gcc can not figure out constant folding, __msecs_to_jiffies which is the renamed original msecs_to_jiffies() function. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Hunter <ahh@google.com> Cc: Paul Turner <pjt@google.com> Cc: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1431951554-5563-3-git-send-email-hofrat@osadl.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Nicholas Mc Guire 提交于
Refactor the msecs_to_jiffies conditional code part in time.c and jiffies.h putting it into conditional functions rather than #ifdefs to improve readability. [ tglx: Verified that there is no binary code change ] Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Hunter <ahh@google.com> Cc: Paul Turner <pjt@google.com> Cc: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1431951554-5563-2-git-send-email-hofrat@osadl.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Nicholas Mc Guire 提交于
kernel/time/timeconst.h is moved to include/generated/ and generated by the top level Kbuild. This allows using timeconst.h in an earlier build stage. Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Joe Perches <joe@perches.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Andrew Hunter <ahh@google.com> Cc: Paul Turner <pjt@google.com> Cc: Michal Marek <mmarek@suse.cz> Link: http://lkml.kernel.org/r/1431951554-5563-1-git-send-email-hofrat@osadl.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
-