Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 27 3月, 2018 2 次提交
  3. 13 1月, 2018 1 次提交
    • J
      arm64: kernel: Add arch-specific SDEI entry code and CPU masking · f5df2696
      由 James Morse 提交于 
      The Software Delegated Exception Interface (SDEI) is an ARM standard
for registering callbacks from the platform firmware into the OS.
This is typically used to implement RAS notifications.

Such notifications enter the kernel at the registered entry-point
with the register values of the interrupted CPU context. Because this
is not a CPU exception, it cannot reuse the existing entry code.
(crucially we don't implicitly know which exception level we interrupted),

Add the entry point to entry.S to set us up for calling into C code. If
the event interrupted code that had interrupts masked, we always return
to that location. Otherwise we pretend this was an IRQ, and use SDEI's
complete_and_resume call to return to vbar_el1 + offset.

This allows the kernel to deliver signals to user space processes. For
KVM this triggers the world switch, a quick spin round vcpu_run, then
back into the guest, unless there are pending signals.

Add sdei_mask_local_cpu() calls to the smp_send_stop() code, this covers
the panic() code-path, which doesn't invoke cpuhotplug notifiers.

Because we can interrupt entry-from/exit-to another EL, we can't trust the
value in sp_el0 or x29, even if we interrupted the kernel, in this case
the code in entry.S will save/restore sp_el0 and use the value in
__entry_task.

When we have VMAP stacks we can interrupt the stack-overflow test, which
stirs x0 into sp, meaning we have to have our own VMAP stacks. For now
these are allocated when we probe the interface. Future patches will add
refcounting hooks to allow the arch code to allocate them lazily.
Signed-off-by: NJames Morse <james.morse@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      f5df2696
  5. 02 11月, 2017 2 次提交
  7. 04 10月, 2017 1 次提交
    • M
      arm64: consistently log boot/secondary CPU IDs · ccaac162
      由 Mark Rutland 提交于 
      Currently we inconsistently log identifying information for the boot CPU
and secondary CPUs. For the boot CPU, we log the MIDR and MPIDR across
separate messages, whereas for the secondary CPUs we only log the MIDR.

In some cases, it would be useful to know the MPIDR of secondary CPUs,
and it would be nice for these messages to be consistent.

This patch ensures that in the primary and secondary boot paths, we log
both the MPIDR and MIDR in a single message, with a consistent format.
the MPIDR is consistently padded to 10 hex characters to cover Aff3 in
bits 39:32, so that IDs can be compared easily.

The newly redundant message in setup_arch() is removed.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Al Stone <ahs3@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: added '0x' prefixes consistently]
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      ccaac162
  9. 09 9月, 2017 1 次提交
  11. 22 8月, 2017 1 次提交
    • H
      arm64: kexec: have own crash_smp_send_stop() for crash dump for nonpanic cores · a88ce63b
      由 Hoeun Ryu 提交于 
       Commit 0ee59413 : (x86/panic: replace smp_send_stop() with kdump friendly
version in panic path) introduced crash_smp_send_stop() which is a weak
function and can be overridden by architecture codes to fix the side effect
caused by commit f06e5153 : (kernel/panic.c: add "crash_kexec_post_
notifiers" option).

 ARM64 architecture uses the weak version function and the problem is that
the weak function simply calls smp_send_stop() which makes other CPUs
offline and takes away the chance to save crash information for nonpanic
CPUs in machine_crash_shutdown() when crash_kexec_post_notifiers kernel
option is enabled.

 Calling smp_send_crash_stop() in machine_crash_shutdown() is useless
because all nonpanic CPUs are already offline by smp_send_stop() in this
case and smp_send_crash_stop() only works against online CPUs.

 The result is that secondary CPUs registers are not saved by
crash_save_cpu() and the vmcore file misreports these CPUs as being
offline.

 crash_smp_send_stop() is implemented to fix this problem by replacing the
existing smp_send_crash_stop() and adding a check for multiple calling to
the function. The function (strong symbol version) saves crash information
for nonpanic CPUs and machine_crash_shutdown() tries to save crash
information for nonpanic CPUs only when crash_kexec_post_notifiers kernel
option is disabled.

* crash_kexec_post_notifiers : false

  panic()
    __crash_kexec()
      machine_crash_shutdown()
        crash_smp_send_stop()    <= save crash dump for nonpanic cores

* crash_kexec_post_notifiers : true

  panic()
    crash_smp_send_stop()        <= save crash dump for nonpanic cores
    __crash_kexec()
      machine_crash_shutdown()
        crash_smp_send_stop()    <= just return.
Signed-off-by: NHoeun Ryu <hoeun.ryu@gmail.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Tested-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      a88ce63b
  13. 16 8月, 2017 1 次提交
    • A
      arm64: kernel: remove {THREAD,IRQ_STACK}_START_SP · 34be98f4
      由 Ard Biesheuvel 提交于 
      For historical reasons, we leave the top 16 bytes of our task and IRQ
stacks unused, a practice used to ensure that the SP can always be
masked to find the base of the current stack (historically, where
thread_info could be found).

However, this is not necessary, as:

* When an exception is taken from a task stack, we decrement the SP by
  S_FRAME_SIZE and stash the exception registers before we compare the
  SP against the task stack. In such cases, the SP must be at least
  S_FRAME_SIZE below the limit, and can be safely masked to determine
  whether the task stack is in use.

* When transitioning to an IRQ stack, we'll place a dummy frame onto the
  IRQ stack before enabling asynchronous exceptions, or executing code
  we expect to trigger faults. Thus, if an exception is taken from the
  IRQ stack, the SP must be at least 16 bytes below the limit.

* We no longer mask the SP to find the thread_info, which is now found
  via sp_el0. Note that historically, the offset was critical to ensure
  that cpu_switch_to() found the correct stack for new threads that
  hadn't yet executed ret_from_fork().

Given that, this initial offset serves no purpose, and can be removed.
This brings us in-line with other architectures (e.g. x86) which do not
rely on this masking.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[Mark: rebase, kill THREAD_START_SP, commit msg additions]
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
      34be98f4
  15. 20 7月, 2017 1 次提交
  17. 23 5月, 2017 1 次提交
  19. 11 4月, 2017 1 次提交
    • M
      arm64: add function to get a cpu's MADT GICC table · e0013aed
      由 Mark Rutland 提交于 
      Currently the ACPI parking protocol code needs to parse each CPU's MADT
GICC table to extract the mailbox address and so on. Each time we parse
a GICC table, we call back to the parking protocol code to parse it.

This has been fine so far, but we're about to have more code that needs
to extract data from the GICC tables, and adding a callback for each
user is going to get unwieldy.

Instead, this patch ensures that we stash a copy of each CPU's GICC
table at boot time, such that anything needing to parse it can later
request it. This will allow for other parsers of GICC, and for
simplification to the ACPI parking protocol code. Note that we must
store a copy, rather than a pointer, since the core ACPI code
temporarily maps/unmaps tables while iterating over them.

Since we parse the MADT before we know how many CPUs we have (and hence
before we setup the percpu areas), we must use an NR_CPUS sized array.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NJeremy Linton <jeremy.linton@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      e0013aed
  21. 06 4月, 2017 1 次提交
  23. 31 3月, 2017 1 次提交
    • M
      arm64: fix NULL dereference in have_cpu_die() · 335d2c2d
      由 Mark Salter 提交于 
      Commit 5c492c3f ("arm64: smp: Add function to determine if cpus are
stuck in the kernel") added a helper function to determine if die() is
supported in cpu_ops. This function assumes a cpu will have a valid
cpu_ops entry, but that may not be the case for cpu0 is spin-table or
parking protocol is used to boot secondary cpus. In that case, there
is a NULL dereference if have_cpu_die() is called by cpu0. So add a
check for a valid cpu_ops before dereferencing it.

Fixes: 5c492c3f ("arm64: smp: Add function to determine if cpus are stuck in the kernel")
Signed-off-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      335d2c2d
  25. 23 3月, 2017 1 次提交
  27. 03 3月, 2017 1 次提交
    • I
      sched/headers: Move task->mm handling methods to <linux/sched/mm.h> · 68e21be2
      由 Ingo Molnar 提交于 
      Move the following task->mm helper APIs into a new header file,
<linux/sched/mm.h>, to further reduce the size and complexity
of <linux/sched.h>.

Here are how the APIs are used in various kernel files:

  # mm_alloc():
  arch/arm/mach-rpc/ecard.c
  fs/exec.c
  include/linux/sched/mm.h
  kernel/fork.c

  # __mmdrop():
  arch/arc/include/asm/mmu_context.h
  include/linux/sched/mm.h
  kernel/fork.c

  # mmdrop():
  arch/arm/mach-rpc/ecard.c
  arch/m68k/sun3/mmu_emu.c
  arch/x86/mm/tlb.c
  drivers/gpu/drm/amd/amdkfd/kfd_process.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/hw/hfi1/file_ops.c
  drivers/vfio/vfio_iommu_spapr_tce.c
  fs/exec.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/mmu_notifier.h
  include/linux/sched/mm.h
  kernel/fork.c
  kernel/futex.c
  kernel/sched/core.c
  mm/khugepaged.c
  mm/ksm.c
  mm/mmu_context.c
  mm/mmu_notifier.c
  mm/oom_kill.c
  virt/kvm/kvm_main.c

  # mmdrop_async_fn():
  include/linux/sched/mm.h

  # mmdrop_async():
  include/linux/sched/mm.h
  kernel/fork.c

  # mmget_not_zero():
  fs/userfaultfd.c
  include/linux/sched/mm.h
  mm/oom_kill.c

  # mmput():
  arch/arc/include/asm/mmu_context.h
  arch/arc/kernel/troubleshoot.c
  arch/frv/mm/mmu-context.c
  arch/powerpc/platforms/cell/spufs/context.c
  arch/sparc/include/asm/mmu_context_32.h
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/core/uverbs_main.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/exec.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/events/uprobes.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/oom_kill.c
  mm/process_vm_access.c
  mm/rmap.c
  mm/swapfile.c
  mm/util.c
  virt/kvm/async_pf.c

  # mmput_async():
  include/linux/sched/mm.h
  kernel/fork.c
  mm/oom_kill.c

  # get_task_mm():
  arch/arc/kernel/troubleshoot.c
  arch/powerpc/platforms/cell/spufs/context.c
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/util.c

  # mm_access():
  fs/proc/base.c
  include/linux/sched/mm.h
  kernel/fork.c
  mm/process_vm_access.c

  # mm_release():
  arch/arc/include/asm/mmu_context.h
  fs/exec.c
  include/linux/sched/mm.h
  include/uapi/linux/sched.h
  kernel/exit.c
  kernel/fork.c
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      68e21be2
  29. 02 3月, 2017 2 次提交
  31. 28 2月, 2017 1 次提交
  33. 03 2月, 2017 1 次提交
  35. 12 11月, 2016 3 次提交
    • M
      arm64: split thread_info from task stack · c02433dd
      由 Mark Rutland 提交于 
      This patch moves arm64's struct thread_info from the task stack into
task_struct. This protects thread_info from corruption in the case of
stack overflows, and makes its address harder to determine if stack
addresses are leaked, making a number of attacks more difficult. Precise
detection and handling of overflow is left for subsequent patches.

Largely, this involves changing code to store the task_struct in sp_el0,
and acquire the thread_info from the task struct. Core code now
implements current_thread_info(), and as noted in <linux/sched.h> this
relies on offsetof(task_struct, thread_info) == 0, enforced by core
code.

This change means that the 'tsk' register used in entry.S now points to
a task_struct, rather than a thread_info as it used to. To make this
clear, the TI_* field offsets are renamed to TSK_TI_*, with asm-offsets
appropriately updated to account for the structural change.

Userspace clobbers sp_el0, and we can no longer restore this from the
stack. Instead, the current task is cached in a per-cpu variable that we
can safely access from early assembly as interrupts are disabled (and we
are thus not preemptible).

Both secondary entry and idle are updated to stash the sp and task
pointer separately.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      c02433dd
    • M
      arm64: make cpu number a percpu variable · 57c82954
      由 Mark Rutland 提交于 
      In the absence of CONFIG_THREAD_INFO_IN_TASK, core code maintains
thread_info::cpu, and low-level architecture code can access this to
build raw_smp_processor_id(). With CONFIG_THREAD_INFO_IN_TASK, core code
maintains task_struct::cpu, which for reasons of hte header soup is not
accessible to low-level arch code.

Instead, we can maintain a percpu variable containing the cpu number.

For both the old and new implementation of raw_smp_processor_id(), we
read a syreg into a GPR, add an offset, and load the result. As the
offset is now larger, it may not be folded into the load, but otherwise
the assembly shouldn't change much.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      57c82954
    • M
      arm64: smp: prepare for smp_processor_id() rework · 580efaa7
      由 Mark Rutland 提交于 
      Subsequent patches will make smp_processor_id() use a percpu variable.
This will make smp_processor_id() dependent on the percpu offset, and
thus we cannot use smp_processor_id() to figure out what to initialise
the offset to.

Prepare for this by initialising the percpu offset based on
current::cpu, which will work regardless of how smp_processor_id() is
implemented. Also, make this relationship obvious by placing this code
together at the start of secondary_start_kernel().
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Tested-by: NLaura Abbott <labbott@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      580efaa7
  37. 17 10月, 2016 1 次提交
    • L
      arm64: kernel: numa: fix ACPI boot cpu numa node mapping · baa5567c
      由 Lorenzo Pieralisi 提交于 
      Commit 7ba5f605 ("arm64/numa: remove the limitation that cpu0 must
bind to node0") removed the numa cpu<->node mapping restriction whereby
logical cpu 0 always corresponds to numa node 0; removing the
restriction was correct, in that it does not really exist in practice
but the commit only updated the early mapping of logical cpu 0 to its
real numa node for the DT boot path, missing the ACPI one, leading to
boot failures on ACPI systems owing to missing node<->cpu map for
logical cpu 0.

Fix the issue by updating the ACPI boot path with code that carries out
the early cpu<->node mapping also for the boot cpu (ie cpu 0), mirroring
what is currently done in the DT boot path.

Fixes: 7ba5f605 ("arm64/numa: remove the limitation that cpu0 must bind to node0")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      baa5567c
  39. 23 9月, 2016 1 次提交
    • D
      arm64: Call numa_store_cpu_info() earlier. · c18df0ad
      由 David Daney 提交于 
      The wq_numa_init() function makes a private CPU to node map by calling
cpu_to_node() early in the boot process, before the non-boot CPUs are
brought online.  Since the default implementation of cpu_to_node()
returns zero for CPUs that have never been brought online, the
workqueue system's view is that *all* CPUs are on node zero.

When the unbound workqueue for a non-zero node is created, the
tsk_cpus_allowed() for the worker threads is the empty set because
there are, in the view of the workqueue system, no CPUs on non-zero
nodes.  The code in try_to_wake_up() using this empty cpumask ends up
using the cpumask empty set value of NR_CPUS as an index into the
per-CPU area pointer array, and gets garbage as it is one past the end
of the array.  This results in:

[    0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4
[    1.970095] pgd = fffffc00094b0000
[    1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000
[    1.982610] Internal error: Oops: 96000004 [#1] SMP
[    1.987541] Modules linked in:
[    1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G        W       4.8.0-rc6-preempt-vol+ #9
[    1.999435] Hardware name: Cavium ThunderX CN88XX board (DT)
[    2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000
[    2.011158] PC is at try_to_wake_up+0x194/0x34c
[    2.015737] LR is at try_to_wake_up+0x150/0x34c
[    2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5
[    2.027803] sp : fffffe0fe8b8fb10
[    2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000
[    2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000
[    2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200
[    2.047270] x23: 00000000000000c0 x22: 0000000000000004
[    2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000
[    2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000
[    2.063386] x17: 0000000000000000 x16: 0000000000000000
[    2.068760] x15: 0000000000000018 x14: 0000000000000000
[    2.074133] x13: 0000000000000000 x12: 0000000000000000
[    2.079505] x11: 0000000000000000 x10: 0000000000000000
[    2.084879] x9 : 0000000000000000 x8 : 0000000000000000
[    2.090251] x7 : 0000000000000040 x6 : 0000000000000000
[    2.095621] x5 : ffffffffffffffff x4 : 0000000000000000
[    2.100991] x3 : 0000000000000000 x2 : 0000000000000000
[    2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80
[    2.111737]
[    2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020)
[    2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000)
[    2.125914] fb00:                                   fffffe0fe8b8fb80 fffffc00080e7648
.
.
.
[    2.442859] Call trace:
[    2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70)
[    2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468
[    2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64
[    2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000
[    2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000
[    2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4
[    2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000
[    2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040
[    2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[    2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018
[    2.523156] fa60: 0000000000000000 0000000000000000
[    2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c
[    2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34
[    2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c
[    2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0
[    2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4
[    2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c
[    2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168
[    2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4
[    2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148
[    2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8
[    2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0
[    2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50
[    2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821)
[    2.603464] ---[ end trace 58c0cd36b88802bc ]---
[    2.608138] Kernel panic - not syncing: Fatal exception

Fix by moving call to numa_store_cpu_info() for all CPUs into
smp_prepare_cpus(), which happens before wq_numa_init().  Since
smp_store_cpu_info() now contains only a single function call,
simplify by removing the function and out-lining its contents.
Suggested-by: NRobert Richter <rric@kernel.org>
Fixes: 1a2db300 ("arm64, numa: Add NUMA support for arm64 platforms.")
Cc: <stable@vger.kernel.org> # 4.7.x-
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Reviewed-by: NRobert Richter <rrichter@cavium.com>
Tested-by: NYisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      c18df0ad
  41. 09 9月, 2016 2 次提交
    • S
      arm64: Rearrange CPU errata workaround checks · c47a1900
      由 Suzuki K Poulose 提交于 
      Right now we run through the work around checks on a CPU
from __cpuinfo_store_cpu. There are some problems with that:

1) We initialise the system wide CPU feature registers only after the
Boot CPU updates its cpuinfo. Now, if a work around depends on the
variance of a CPU ID feature (e.g, check for Cache Line size mismatch),
we have no way of performing it cleanly for the boot CPU.

2) It is out of place, invoked from __cpuinfo_store_cpu() in cpuinfo.c. It
is not an obvious place for that.

This patch rearranges the CPU specific capability(aka work around) checks.

1) At the moment we use verify_local_cpu_capabilities() to check if a new
CPU has all the system advertised features. Use this for the secondary CPUs
to perform the work around check. For that we rename
  verify_local_cpu_capabilities() => check_local_cpu_capabilities()
which:

   If the system wide capabilities haven't been initialised (i.e, the CPU
   is activated at the boot), update the system wide detected work arounds.

   Otherwise (i.e a CPU hotplugged in later) verify that this CPU conforms to the
   system wide capabilities.

2) Boot CPU updates the work arounds from smp_prepare_boot_cpu() after we have
initialised the system wide CPU feature values.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      c47a1900
    • Z
      arm64/numa: remove the limitation that cpu0 must bind to node0 · 7ba5f605
      由 Zhen Lei 提交于 
      1. Remove the old binding code.
2. Read the nid of cpu0 from dts.
3. Fallback the nid of cpu0 to 0 when numa=off is set in bootargs.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      7ba5f605
  43. 07 9月, 2016 1 次提交
    • C
      arm64: Use static keys for CPU features · efd9e03f
      由 Catalin Marinas 提交于 
      This patch adds static keys transparently for all the cpu_hwcaps
features by implementing an array of default-false static keys and
enabling them when detected. The cpus_have_cap() check uses the static
keys if the feature being checked is a constant, otherwise the compiler
generates the bitmap test.

Because of the early call to static_branch_enable() via
check_local_cpu_errata() -> update_cpu_capabilities(), the jump labels
are initialised in cpuinfo_store_boot_cpu().

Cc: Will Deacon <will.deacon@arm.com>
Cc: Suzuki K. Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      efd9e03f
  45. 09 8月, 2016 1 次提交
  47. 21 7月, 2016 2 次提交
  49. 19 7月, 2016 1 次提交
    • W
      arm64: debug: unmask PSTATE.D earlier · 2ce39ad1
      由 Will Deacon 提交于 
      Clearing PSTATE.D is one of the requirements for generating a debug
exception. The arm64 booting protocol requires that PSTATE.D is set,
since many of the debug registers (for example, the hw_breakpoint
registers) are UNKNOWN out of reset and could potentially generate
spurious, fatal debug exceptions in early boot code if PSTATE.D was
clear. Once the debug registers have been safely initialised, PSTATE.D
is cleared, however this is currently broken for two reasons:

(1) The boot CPU clears PSTATE.D in a postcore_initcall and secondary
    CPUs clear PSTATE.D in secondary_start_kernel. Since the initcall
    runs after SMP (and the scheduler) have been initialised, there is
    no guarantee that it is actually running on the boot CPU. In this
    case, the boot CPU is left with PSTATE.D set and is not capable of
    generating debug exceptions.

(2) In a preemptible kernel, we may explicitly schedule on the IRQ
    return path to EL1. If an IRQ occurs with PSTATE.D set in the idle
    thread, then we may schedule the kthread_init thread, run the
    postcore_initcall to clear PSTATE.D and then context switch back
    to the idle thread before returning from the IRQ. The exception
    return path will then restore PSTATE.D from the stack, and set it
    again.

This patch fixes the problem by moving the clearing of PSTATE.D earlier
to proc.S. This has the desirable effect of clearing it in one place for
all CPUs, long before we have to worry about the scheduler or any
exception handling. We ensure that the previous reset of MDSCR_EL1 has
completed before unmasking the exception, so that any spurious
exceptions resulting from UNKNOWN debug registers are not generated.

Without this patch applied, the kprobes selftests have been seen to fail
under KVM, where we end up attempting to step the OOL instruction buffer
with PSTATE.D set and therefore fail to complete the step.

Cc: <stable@vger.kernel.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reported-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      2ce39ad1
  51. 27 6月, 2016 1 次提交
  53. 22 6月, 2016 1 次提交
  55. 30 5月, 2016 1 次提交
  57. 11 5月, 2016 1 次提交
  59. 25 4月, 2016 1 次提交
    • S
      arm64: Fix behavior of maxcpus=N · 44dbcc93
      由 Suzuki K Poulose 提交于 
      maxcpu=n sets the number of CPUs activated at boot time to a max of n,
but allowing the remaining CPUs to be brought up later if the user
decides to do so. However, on arm64 due to various reasons, we disallowed
hotplugging CPUs beyond n, by marking them not present. Now that
we have checks in place to make sure the hotplugged CPUs have compatible
features with system and requires no new errata, relax the restriction.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      44dbcc93
  61. 19 4月, 2016 1 次提交
    • J
      arm64: Reduce verbosity on SMP CPU stop · 82611c14
      由 Jan Glauber 提交于 
      When CPUs are stopped during an abnormal operation like panic
for each CPU a line is printed and the stack trace is dumped.

This information is only interesting for the aborting CPU
and on systems with many CPUs it only makes it harder to
debug if after the aborting CPU the log is flooded with data
about all other CPUs too.

Therefore remove the stack dump and printk of other CPUs
and only print a single line that the other CPUs are going to be
stopped and, in case any CPUs remain online list them.
Signed-off-by: NJan Glauber <jglauber@cavium.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
      82611c14
  63. 16 4月, 2016 2 次提交