- 27 5月, 2011 40 次提交
-
-
由 Kyungmin Park 提交于
Move the Samsung s5pc100 SoC GPIO driver to drivers/gpio Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Kyungmin Park 提交于
Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Kyungmin Park 提交于
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Kyungmin Park 提交于
It's common gpiolib for recent Samsung SoCs. Move to drivers/gpio Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Rickard Andersson 提交于
Signed-off-by: NRickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: NMartin Persson <martin.persson@stericsson.com> [Split off from larger patch] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Rabin Vincent 提交于
Useful to check the status of the runtime pin muxing. Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com> [Squashed, modified to use chip-internal IRQ trigger state] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> [grant.likely: squashed with kconfig fixup] Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Linus Walleij 提交于
This moves the U300 GPIO driver out of arch/arm/mach-u300 and into the desired location indicated by the subsystem maintainer. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Kristen Carlson Accardi 提交于
While this is essentially a no-op for this driver, it has the side effect of letting the PMU driver snoop D3 requests from the PCI core for this driver. This is only for langwell, not for whitney point. Signed-off-by: NKristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Haojian Zhuang 提交于
PCA957x is i2c gpio expander, and similar to PCA953x. Although register configurations are different between PCA957x and PCA953x. They can share a lot of components, such as IRQ handling, GPIO IN/OUT. So updating PCA953x driver to support PCA957x chips. Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Ed Wildgoose 提交于
cs5535-gpio.c has been split into two, with various setup moved into cs5535-mfd.c. Given that cs5535-gpio will not load without the -mfd part, lets make that dependency explicit in Kconfig Signed-off-by: NEd Wildgoose <kernel@wildgooses.com> Acked-by: NAndres Salomon <dilinger@queued.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Linus Torvalds 提交于
Merge branch 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: vdso: Remove unused variable x86-64: Optimize vDSO time() x86-64: Add time to vDSO x86-64: Turn off -pg and turn on -foptimize-sibling-calls for vDSO x86-64: Move vread_tsc into a new file with sensible options x86-64: Vclock_gettime(CLOCK_MONOTONIC) can't ever see nsec < 0 x86-64: Don't generate cmov in vread_tsc x86-64: Remove unnecessary barrier in vread_tsc x86-64: Clean up vdso/kernel shared variables
-
由 Linus Torvalds 提交于
Merge branches 'core-fixes-for-linus' and 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: seqlock: Get rid of SEQLOCK_UNLOCKED * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: Remove smp_affinity_list when unregister irq proc
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/via: rename VIA local config struct basic_mmio_gpio: split into a gpio library and platform device gpio: remove some legacy comments in build files gpio: add trace events for setting direction and value gpio/pca953x: Use handle_simple_irq instead of handle_edge_irq gpiolib: export gpiochip_find gpio: remove redundant Kconfig depends on GPIOLIB basic_mmio_gpio: convert to non-__raw* accessors basic_mmio_gpio: support direction registers basic_mmio_gpio: support different input/output registers basic_mmio_gpio: detect output method at probe time basic_mmio_gpio: request register regions basic_mmio_gpio: allow overriding number of gpio basic_mmio_gpio: convert to platform_{get,set}_drvdata() basic_mmio_gpio: remove runtime width/endianness evaluation
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (57 commits) regulator: Fix 88pm8607.c printk format warning input: Add support for Qualcomm PMIC8XXX power key input: Add Qualcomm pm8xxx keypad controller driver mfd: Add omap-usbhs runtime PM support mfd: Fix ASIC3 SD Host Controller Configuration size mfd: Fix omap_usbhs_alloc_children error handling mfd: Fix omap usbhs crash when rmmoding ehci or ohci mfd: Add ASIC3 LED support leds: Add ASIC3 LED support mfd: Update twl4030-code maintainer e-mail address mfd: Correct the name and bitmask for ab8500-gpadc BTempPullUp mfd: Add manual ab8500-gpadc batt temp activation for AB8500 3.0 mfd: Provide ab8500-core enumerators for chip cuts mfd: Check twl4030-power remove script error condition after i2cwrite mfd: Fix twl6030 irq definitions mfd: Add phoenix lite (twl6025) support to twl6030 mfd: Avoid to use constraint name in 88pm860x regulator driver mfd: Remove checking on max8925 regulator[0] mfd: Remove unused parameter from 88pm860x API mfd: Avoid to allocate 88pm860x static platform data ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Save PID of ID's owner RDMA/cma: Add support for netlink statistics export RDMA/cma: Pass QP type into rdma_create_id() RDMA: Update exported headers list RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h> RDMA/nes: Add a check for strict_strtoul() RDMA/cxgb3: Don't post zero-byte read if endpoint is going away RDMA/cxgb4: Use completion objects for event blocking IB/srp: Fix integer -> pointer cast warnings IB: Add devnode methods to cm_class and umad_class IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required IB/uverbs: Add devnode method to set path/mode RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node RDMA: Add netlink infrastructure RDMA: Add error handling to ib_core_init()
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove spi/spi_tegra: use spi_unregister_master() instead of spi_master_put() spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path spi: Use void pointers for data in simple SPI I/O operations spi/pl022: use cpu_relax in the busy loop spi/pl022: mark driver non-experimental spi/pl022: timeout on polled transfer v2 spi/dw_spi: improve the interrupt mode with the batch ops spi/dw_spi: change poll mode transfer from byte ops to batch ops spi/dw_spi: remove the un-necessary flush() spi/dw_spi: unify the low level read/write routines
-
由 Linus Torvalds 提交于
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/4xx: Adding PCIe MSI support powerpc: Fix irq_free_virt by adjusting bounds before loop powerpc/irq: Protect irq_radix_revmap_lookup against irq_free_virt powerpc/irq: Check desc in handle_one_irq and expand generic_handle_irq powerpc/irq: Always free duplicate IRQ_LEGACY hosts powerpc/irq: Remove stale and misleading comment powerpc/cell: Rename ipi functions to match current abstractions powerpc/cell: Use common smp ipi actions Remove unused MSG_ flags in linux/smp.h powerpc/pseries: Update MAX_HCALL_OPCODE to reflect page coalescing powerpc/oprofile: Handle events that raise an exception without overflowing powerpc/ftrace: Implement raw syscall tracepoints on PowerPC
-
由 Linus Torvalds 提交于
I stupidly broke the case of CONFIG_HUGETLBFS=n when doing the conversion to vm_flags_t in commit ca16d140 ("mm: don't access vm_flags as 'int'"). And my 'allyesconfig' build didn't find it, for obvious reasons.. Include <linux/mm_types.h> in <linux/hugetlb.h>. The problem could have been avoided by just turning the hugetlb_file_setup() error wrapper into a macro, but mm_types.h is a reasonable include in this file. Reported-by: NRichard -rw- Weinberger <richard.weinberger@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (28 commits) Ocfs2: Teach local-mounted ocfs2 to handle unwritten_extents correctly. ocfs2/dlm: Do not migrate resource to a node that is leaving the domain ocfs2/dlm: Add new dlm message DLM_BEGIN_EXIT_DOMAIN_MSG Ocfs2/move_extents: Set several trivial constraints for threshold. Ocfs2/move_extents: Let defrag handle partial extent moving. Ocfs2/move_extents: move/defrag extents within a certain range. Ocfs2/move_extents: helper to calculate the defraging length in one run. Ocfs2/move_extents: move entire/partial extent. Ocfs2/move_extents: helpers to update the group descriptor and global bitmap inode. Ocfs2/move_extents: helper to probe a proper region to move in an alloc group. Ocfs2/move_extents: helper to validate and adjust moving goal. Ocfs2/move_extents: find the victim alloc group, where the given #blk fits. Ocfs2/move_extents: defrag a range of extent. Ocfs2/move_extents: move a range of extent. Ocfs2/move_extents: lock allocators and reserve metadata blocks and data clusters for extents moving. Ocfs2/move_extents: Add basic framework and source files for extent moving. Ocfs2/move_extents: Adding new ioctl code 'OCFS2_IOC_MOVE_EXT' to ocfs2. Ocfs2/refcounttree: Publicize couple of funcs from refcounttree.c Ocfs2: Add a new code 'OCFS2_INFO_FREEFRAG' for o2info ioctl. Ocfs2: Add a new code 'OCFS2_INFO_FREEINODE' for o2info ioctl. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: cleancache shim to Xen Transcendent Memory ocfs2: add cleancache support ext4: add cleancache support btrfs: add cleancache support ext3: add cleancache support mm/fs: add hooks to support cleancache mm: cleancache core ops functions and config fs: add field to superblock to support cleancache mm/fs: cleancache documentation Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: correctly decrement the extent buffer index in xfs_bmap_del_extent xfs: check for valid indices in xfs_iext_get_ext and xfs_iext_idx_to_irec xfs: fix up asserts in xfs_iflush_fork xfs: do not do pointer arithmetic on extent records xfs: do not use unchecked extent indices in xfs_bunmapi xfs: do not use unchecked extent indices in xfs_bmapi xfs: do not use unchecked extent indices in xfs_bmap_add_extent_* xfs: remove if_lastex xfs: remove the unused XFS_BMAPI_RSVBLOCKS flag xfs: do not discard alloc btree blocks xfs: add online discard support
-
由 Randy Dunlap 提交于
Fix printk format warning (seen on x86_64) and change to unsigned output format: drivers/regulator/88pm8607.c:417: warning: format '%d' expects type 'int', but argument 3 has type 'resource_size_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Trilok Soni 提交于
Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NTrilok Soni <tsoni@codeaurora.org> Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Trilok Soni 提交于
Add Qualcomm PMIC8XXX based keypad controller driver supporting upto 18x8 matrix configuration. Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NTrilok Soni <tsoni@codeaurora.org> Signed-off-by: NAnirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Keshava Munegowda 提交于
The usbhs core driver does not enable/disable the interface and functional clocks; These clocks are handled by hwmod and runtime pm, hence insted of the clock enable/disable, the runtime pm APIS are used. however,the port clocks and tll clocks are handled by the usbhs core. Signed-off-by: NKeshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Paul Parsons 提交于
The size of the TC6380AF SD Host Controller Configuration area is 0x200 bytes (assuming registers are aligned on 32-bit boundaries), not 0x400 bytes. Source: Toshiba TC6380AF Specification sections 4.2 and 4.3.1 Signed-off-by: NPaul Parsons <lost.distance@yahoo.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Axel Lin 提交于
1. Return proper error if omap_usbhs_alloc_child fails 2. In the case of goto err_ehci, we should call platform_device_unregister(ehci) instead of platform_device_put(ehci) because we have already added the platform device to device hierarchy. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Tested-by: NKeshava Munegowda <keshava_mgowda@ti.com> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Keshava Munegowda 提交于
The disabling of clocks and freeing GPIO are changed to fix the occurrence of the crash of rmmod of ehci and ohci drivers. The GPIOs should be freed after the spin locks are unlocked. Signed-off-by: NKeshava Munegowda <keshava_mgowda@ti.com> Acked-by: NFelipe Balbi <balbi@ti.com> Cc: stable@kernel.org Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Paul Parsons 提交于
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: NPaul Parsons <lost.distance@yahoo.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Paul Parsons 提交于
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: NPaul Parsons <lost.distance@yahoo.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Peter Ujfalusi 提交于
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Johan Palsson 提交于
The bitmask for enabling the BatTemp pull-up was wrong and is corrected. The name is also changed to be inline with the AB8500 register description Signed-off-by: NJohan Palsson <johan.palsson@stericsson.com> Reviewed-by: NMattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Karl Komierowski 提交于
In AB8500 3.0 the pull-up supplying the NTC must be manually activated. Add enumerators to chip version detection logic. Signed-off-by: NKalle Komierowski <karl.komierowski@stericsson.com> Reviewed-by: NJohan Palsson <johan.palsson@stericsson.com> Reviewed-by: NDaniel Willerud <daniel.willerud@stericsson.com> Reviewed-by: NJonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Linus Walleij 提交于
Since functionality in MFD cells may need to be adjusted according to chip revision, let's enumerate them and keep track of them. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Lesly A M 提交于
Fixing the error condition check in twl4030 remove script function. Due to some typo in commit ID: 11a441ceSigned-off-by: NLesly A M <leslyam@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Graeme Gregory 提交于
The charger fault IRQs from the twl will in future patches be handled by a seperate IRQ handler in the charger driver than the general charger IRQ. Give them different IRQ numbers now to allow the charger driver to be merged in the future. Signed-off-by: NGraeme Gregory <gg@slimlogic.co.uk> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Graeme Gregory 提交于
Phoenix Lite is based on the twl6030 family of PMICs. It has mostly the same feature set of twl6030 but with small changes. The codec block has also been removed. It also has a new charger block and new features in its ADC block. VUSB handling also differs. Signed-off-by: NGraeme Gregory <gg@slimlogic.co.uk> Reviewed-by: NMark Brown <broonie@opensource.wolfsonicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Haojian Zhuang 提交于
Avoid to use constraint name in regulator driver. So use regulator id is used instead in platform driver. Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-