Add BER monitoring with Pre-Viterbi error rate.

Add UCBLOCKS based on Aborted packets.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Correction to tuner ID 0x51.

Don't force tuner ID 0x60 unless eprom data zero.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds support for the Plextor ConvertX PX-AV100U, which uses the
eMPIA EM2820 chip.  The device has a device_id of '0x093b, 0xa003'.  I
am using the existing EM2820_BOARD_PINNACLE_DVC_90 board profile, as
the Pinnacle Dazzle DVC 90/100/101/107, Kaiser Baas Video to DVD
maker, and Kworld DVD Maker 2 were already mapped to it.  Some more
background on the device and my testing can be found at
http://www.donkramer.net/plextor_122710.pdfSigned-off-by: NDon Kramer <dgkramer@comcast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some channels appear weak signal after warm boot.

Because tuner id is not present in eprom 0x38 is
assigned.

9006 devices are now always assigned 0x60.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixes issues with PID filter
Stalling of some channels when PID is on.
PID filter not turning off fully.
PID filter can now turn on and off each index.

Removed PID_RST from it913x_pid_filter_ctrl.
Replaced with PID_EN removed from it913x_pid_filter
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The VIDIOC_LOG_STATUS ioctl allows to dump the current status of a driver
to the kernel log. Currently this ioctl is only available at video device
nodes and the subdevs rely on the host driver to expose their core.log_status
operation to user space.

This patch adds VIDIOC_LOG_STATUS support at the sub-device nodes,
for standalone subdevs that expose their own /dev entry.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following ioctl sequence causes fimc_dma_run() to start processing without
complete scaler and DMA initialization which causes missing interrupt and
blocking on DQBUF:
S_FMT, STREAMON, QBUF, DQBUF, STREAMOFF, STREAMON, QBUF, DQBUF.

Fix this regression caused by moving pm_runtime* calls to start/stop_streaming
callback by making sure the fimc_m2m_resume() is always invoked when expected.
Reported-by: NTomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It is not common for dvb_net_init to fail, but after the patch
"dvb_net_init: return -errno on error" it can fail due to running out
of memory.  Handle this.

From an audit of dvb_net_init callers.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Reviewed-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

From an audit of dvb_net_init callers, now that that function
returns -errno on error.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Clean up and error out if dvb_net_init fails (for example due to
ENOMEM).  This involves moving the dvb_net_init call to before
frontend_init to make cleaning up a little easier.

From an audit of dvb_net_init callers, now that dvb_net_init lets
callers know about errors.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Clean up and error out if dvb_net_init fails (for example when
running out of memory).

From an audit of dvb_net_init callers, now that dvb_net_init
has learned to return a nonzero value from time to time.

[mchehab.redhat.com: codingstyle fix: printk() should include KERN_ facility level]
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Bail out if dvb_net_init encounters an error (for example an
out-of-memory condition), now that it reports them.

[mchehab@redhat.com: CodingStyle fix: don't use  "if ((ret = foo()) < 0)"]
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Avoid some repetition by adopting the usual "goto err" idiom for error
handling.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Repeating the same cleanup code in each error handling path makes life
unnecessarily difficult for reviewers, who much check each instance of
the same copy+pasted code separately.  A "goto" to the end of the
function is more maintainable and conveys the intent more clearly.

While we're touching this code, also lift some assignments from "if"
conditionals for simplicity.

No functional change intended.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

videobuf_dvb_register_bus relies on dvb_net_init to set dvbnet->dvbdev
on success, but ever since commit fcc8e7d8 ("dvb_net: Simplify the
code if DVB NET is not defined"), ->dvbdev is left unset when
networking support is disabled.  Therefore in such configurations
videobuf_dvb_register_bus always returns failure, tripping
little-tested error handling paths and preventing the device from
being initialized and used.

Now that dvb_net_init returns a nonzero value on error, we can use
that as a more reliable error indication.  Do so.

Now your card be used with CONFIG_DVB_NET=n, and the kernel will pass
on a more useful error code describing what happened when
CONFIG_DVB_NET=y but dvb_net_init fails due to resource exhaustion.
Reported-by: NDavid Fries <David@Fries.net>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dvb_net_init unconditionally returns 0.  Callers such as
videobuf_dvb_register_frontend examine dvbnet->dvbdev instead of the
return value to tell whether the operation succeeded.  If it has been
set to a valid pointer, success; if it was left equal to NULL,
failure.

Alas, there is an edge case where that logic does not work as well:
when network support has been compiled out (CONFIG_DVB_NET=n), we want
dvb_net_init and related operations to behave as no-ops and always
succeed, but there is no appropriate value to which to set dvb->dvbdev
to indicate this.

Let dvb_net_init return a meaningful error code, as preparation for
adapting callers to look at that instead.

The only immediate impact of this patch should be to make the few
callers that already check for an error code from dvb_net_init behave
a little more sensibly when it fails.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Turn the pid filter off by caps option only.

This is so the full stream is passed to demuxer and not limited
by pid count.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The function v4l2_device_register() is called too late in vpif_probe().
This meant that vpif_obj.v4l2_dev is accessed before it is initialized
which caused a crash.

This used to work in the past, but video_register_device() is now actually
using the v4l2_dev pointer.

Note that vpif_display.c doesn't have this bug, there v4l2_device_register()
is called at the beginning of vpif_probe.
Signed-off-by: NGeorgios Plakaris <gplakari@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NManjunath Hadli <Manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Somehow I didn't ever quite get around to implementing suspend/resume on
the MMP2 platform; this patch fixes that little oversight.  A bit of core
work was necessary to do the right thing in the s/g DMA case.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Turn the pid filter off by caps option only.

This is so the full stream is passed to demuxer and not limited
by pid count.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reworked device probing to get rid of hacks to guess the maximum size of
dvb iso transfer packets. The new code also selects the first alternate
config which supports the largest possible iso transfers for dvb.

[mchehab@redhat.com: Fix a few checkpatch.pl CodingStyle compliants]
Signed-off-by: NHolger Nelson <hnelson@hnelson.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds support for the Honestech Vidbox NW03 USB capture device.
Signed-off-by: NGareth Williams <gareth@garethwilliams.me.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds support for the Terratec Cinergy HTC USB XS which is similar to
the Terratec H5 by adding the USB-ids to the table. According to
http://linux.terratec.de it uses the same ICs and DVB-C works for me
using the firmware of the H5.
Signed-off-by: NHolger Nelson <hnelson@hnelson.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

dw2102_properties et al refer to entries in the USB-id table using
hard-coded indices, as in "&dw2102_table[6]", which means adding new
entries before the end of the list has the potential to introduce bugs
in code elsewhere in the file.

Use C99-style initializers with symbolic names for each index to avoid
this.  This way, other device tables wanting to reuse the USB ids can
use expressions like "&dw2102_table[TEVII_S630]" that do not change as
the entries in the table are reordered.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The conditional after the kzalloc says that the tested expression should
never be true, but if it were, the allocated data would have to be freed.
This change just moves the allocation below the test, to avoid any
possibility of the problem.

A simplified version of the semantic match that finds the problem is as
follows: (http://coccinelle.lip6.fr)

// <smpl>
@r exists@
local idexpression x;
statement S;
identifier f1;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
x->f1
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

vpbe_dev needs to be freed before leaving the function in an error case.

A simplified version of the semantic match that finds the problem is as
follows: (http://coccinelle.lip6.fr)

// <smpl>
@r exists@
local idexpression x;
statement S;
identifier f1;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
x->f1
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There were some curly braces missing so the probe() function always
failed.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I changed the function definitions for dt3155_queue_setup() to match the
newer API.  The dt3155_start_streaming() function didn't do anything so
I just removed it.

This silences the following gcc warnings:
drivers/staging/media/dt3155v4l/dt3155v4l.c:307:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/staging/media/dt3155v4l/dt3155v4l.c:307:2: warning: (near initialization for ‘q_ops.queue_setup’) [enabled by default]
drivers/staging/media/dt3155v4l/dt3155v4l.c:311:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/staging/media/dt3155v4l/dt3155v4l.c:311:2: warning: (near initialization for ‘q_ops.start_streaming’) [enabled by default]
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

To properly detect frame loss the driver must keep
track of a frame_count.

Furthermore, field_count use was erroneous because
in progressive format this must be incremented twice.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch uses channel 2 of the eMMa-PrP to convert
format provided by the sensor to YUV420.

This format is very useful since it is used by the
internal H.264 encoder.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch
- add ISI_MCK clock enable/disable code.
- change field name in isi_platform_data structure
Signed-off-by: NJosh Wu <josh.wu@atmel.com>
[g.liakhovetski@gmx.de: fix label names]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As our general practice, we use stream off before we close
the video node. So that the drivers its stream off function
would be called before its remove function.

But for the case for ctrl+c, the program would be force closed.
We have no chance to call that vb2 stream off from user space,
but directly call the remove function in soc_camera.

In that common code of soc_camera:

                ici->ops->remove(icd);
                if (ici->ops->init_videobuf2)
                        vb2_queue_release(&icd->vb2_vidq);

It would first call the device remove function, then release vb2,
in which stream off function is called. Thus it create different
order for the driver.

This patch change the order to make driver see the same sequence
to make it happy.
Signed-off-by: NLei Wen <leiwen@marvell.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

mt9m111 camera sensors support cropping and scaling. The current
implementation is broken. For example, .s_crop() sets output frame sizes
instead of the input cropping window. This patch adds a proper implementation
of these methods. Besides it adds a sensor-disable and -enable operations
on first open() and last close() respectively, to save power while closed and
to return the camera to the default power-on state.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Cleanly separating register contexts A and B will allow us to configure
the contexts independently.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The "pixfmt" parameter of the struct soc_camera_host_ops::set_bus_param()
method is redundant, because at the time, when this method is called,
pixfmt is guaranteed to be equal to icd->current_fmt->host_fmt->fourcc.
Remove this parameter and update all drivers accordingly.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Before this patch the resulting values from a try_fmt were different then
those from a s_fmt with the same parameters. try_fmt simply did not
touch / fill some values like bytesperline at all.

This patch also corrects bytesperline to the proper value for a planar
format such as the YUV420P format the pwc driver produces, which is
the bytesperline value for the biggest plane, rather then those
of all planes added together.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of making this a module parameter, automatically fallback to
higher compression settings if there is not enough bandwidth.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The pwc driver claims to support any resolution between 160x120
and 640x480, but emulates this by simply drawing a black border
around the image. Userspace can draw its own black border if it
really wants one.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This stems from the v4l1 era, with v4l2 everything can be done with
standardized v4l2 API calls.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>