Chmap helper arguments are modified to use either hdac_device
object or hdac_chmap object instead of codec specific object.
With this moving these APIs to core will be easier.

Helper added to access a specific channel_allocation object
instead of directly accessing.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add slot and channel count programming to hdmi_chmap object and
move the chmap_ops to core. Use register_chmap_ops API to
register for default ops.  Override specific chmap ops in the
driver.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With this chmap object is added as private data and new ops are
added to access driver specific chmap.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

chmap object represents multichannel capability and contains chmap
ops. Legacy driver is updated to use this.

With next set of patches chmap object is moved to common to be
reused by other drivers (ex: skylake ASoC hdmi driver).
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Defer to register acomp eld notifier until hdmi audio driver
is fully ready.

After registering eld notifier, gfx driver can use this
callback function to notify audio driver the monitor
connection event. However this action may happen when
audio driver is adding the pins or doing other initialization.
This is not always safe, however. For example, using
per_pin->lock before the lock is initialized.

Let's register the eld notifier after the initialization is done.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

To make sure audio_ptr is set before intel_audio_codec_enable()
or intel_audio_codec_disable() calling pin_eld_notify(),
this patch adds wmb barrier to prevent optimizing.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.

This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: NSimon South <simon@simonsouth.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

hdmi_find_pcm_slot return -EBUSY when not no pcm slot found,
not -ENODEV. So the caller should compare with -EBUSY.

Fixes: a76056f2 ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

azx_probe_continue() uses pm_runtime_put_noidle() to drop the rpm
usage_count, which means that if it's the last reference the
autosuspend of the controller won't actually happen. So if the codecs
autosuspend before the azx_probe_continue() drops the last
reference we'll fail to autosuspend the controller. This does happen
in practice, but not every time. As can be seen in [1] the controller
autosuspend attempt fails due to the usage_count when suspending the
codecs. A bit later we see the the contoller usage_count dropping to
zero without further attempts at autosuspend.

Fix the problem by using pm_runtime_put_autosuspend() instead, which
will kick off the autosuspend of the controller even if the codecs
are already asleep. As can be seen in [2] the controller autosuspend
still fails while suspending the codecs, but later on we see another
autosuspend attempt after dropping the usage_count to 0.

I was also a bit worried that there might still be a race between the
controller autosuspend and the rest of the code in azx_probe_continue().
So I also tried replacing the the put_noidle() with put_sync_suspend().
No explosions occurred, so I'm somewhat satisfied that there are no
serious problems in this area.

[1]
 kworker/1:2-122   [001] ....    63.661310: __pm_runtime_suspend: hdaudioC0D0 usage_count 0
 kworker/1:2-122   [001] d..2    63.661316: rpm_suspend: hdaudioC0D0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.661317: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/1:2-122   [001] d..2    63.661332: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/1:1-72    [001] d..2    63.661543: rpm_suspend: hdaudioC0D0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:1-72    [001] d..1    63.661544: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/1:1-72    [001] ....    63.661545: hda_codec_runtime_suspend: hdaudioC0D0 suspend
 kworker/1:1-72    [001] d..2    63.661614: rpm_idle: 0000:00:03.0 flags-1 cnt-1  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:1-72    [001] d..1    63.661615: rpm_check_suspend_allowed: 0000:00:03.0 usage_count 1
 kworker/1:1-72    [001] d..1    63.661615: rpm_check_suspend_allowed: 0000:00:03.0 retval -11
 kworker/1:1-72    [001] d..2    63.661616: rpm_return_int: rpm_idle+0x249/0x487:0000:00:03.0 ret=-11
 kworker/1:1-72    [001] d..2    63.661616: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/1:2-122   [001] d..2    63.664834: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.664835: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/1:2-122   [001] d..2    63.664836: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/1:2-122   [001] d..2    63.664841: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.664841: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/1:2-122   [001] d..2    63.664841: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/1:2-122   [001] ....    63.664842: azx_probe_continue: 0000:00:03.0 usage_count=0

[2]
 kworker/0:0-4     [000] ....    50.354567: __pm_runtime_suspend: hdaudioC0D0 usage_count 0
 kworker/0:0-4     [000] d..2    50.354574: rpm_suspend: hdaudioC0D0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.354575: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/0:0-4     [000] d..2    50.354589: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/0:2-135   [000] d..2    50.354809: rpm_suspend: hdaudioC0D0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:2-135   [000] d..1    50.354810: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/0:2-135   [000] ....    50.354816: hda_codec_runtime_suspend: hdaudioC0D0 suspend
 kworker/0:2-135   [000] d..2    50.354908: rpm_idle: 0000:00:03.0 flags-1 cnt-1  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:2-135   [000] d..1    50.354909: rpm_check_suspend_allowed: 0000:00:03.0 usage_count 1
 kworker/0:2-135   [000] d..1    50.354909: rpm_check_suspend_allowed: 0000:00:03.0 retval -11
 kworker/0:2-135   [000] d..2    50.354909: rpm_return_int: rpm_idle+0x249/0x487:0000:00:03.0 ret=-11
 kworker/0:2-135   [000] d..2    50.354910: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/0:0-4     [000] d..2    50.373791: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373792: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/0:0-4     [000] d..2    50.373793: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/0:0-4     [000] d..2    50.373797: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373798: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/0:0-4     [000] d..2    50.373798: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/0:0-4     [000] ....    50.373799: __pm_runtime_suspend: 0000:00:03.0 usage_count 0
 kworker/0:0-4     [000] d..2    50.373800: rpm_suspend: 0000:00:03.0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373800: rpm_check_suspend_allowed: 0000:00:03.0 retval 0
 kworker/0:0-4     [000] d..2    50.373803: rpm_return_int: rpm_suspend+0x406/0x5e8:0000:00:03.0 ret=0
 kworker/0:0-4     [000] d..2    50.385164: rpm_suspend: 0000:00:03.0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.385165: rpm_check_suspend_allowed: 0000:00:03.0 retval 0
 kworker/0:0-4     [000] ....    50.385174: azx_runtime_suspend: 0000:00:03.0 azx suspend releaseing power well
 kworker/0:0-4     [000] ....    50.385179: azx_runtime_suspend: 0000:00:03.0 azx suspend
 kworker/0:0-4     [000] d..2    50.386872: rpm_return_int: rpm_suspend+0x406/0x5e8:0000:00:03.0 ret=0
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq.  But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling.  Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.

This patch changes the interrupt handler code to loop over the
check-and-process.  The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.

For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits.  Other than that,
the change is only in the irq handler itself.
Reported-by: NLibin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working.  Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: NDerick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.

This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660Co-Authored-By: NKailang <kailang@realtek.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.

The noise disappears after using the aamix fixup.

Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
    Vendor Id: 0x10ec0255
    Subsystem Id: 0x10280725
    Revision Id: 0x100002
    No Modem Function Group found

BugLink: http://bugs.launchpad.net/bugs/1549620Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

eld control is created based on pcm now.
When monitor is connected, eld control will be bound to
pin automatically.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since the recent integration of kctl jack and input jack layers, we
can basically build the jack layer even without input devices.  That
is, the jack layer itself can be built with conditional to enable the
input device support or not, while the users may enable always
CONFIG_SND_JACK unconditionally.

For achieving it, this patch changes the following:
- A new Kconfig, CONFIG_SND_JACK_INPUT_DEV, was introduced to indicate
  whether the jack layer supports the input device,
- A few items in snd_jack struct and relevant codes are conditionally
  built upon CONFIG_SND_JACK_INPUT_DEV,
- The users of CONFIG_SND_JACK drop the messy dependency on
  CONFIG_INPUT.

This change also automagically fixes a potential bug in HD-audio
driver Arnd reported, where the NULL or uninitialized jack instance is
dereferenced.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Skylake machines show the codec probe errors in certain
situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
codec at reloading the snd-hda-intel module like:
  snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
  snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: lastcmd=0x000f0000
  snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x000f0000
  snd_hda_intel 0000:00:1f.3: Codec #0 probe error; disabling it...
  hdaudio hdaudioC0D2: no AFG or MFG node found
  snd_hda_intel 0000:00:1f.3: no codecs initialized

Also, HP G470 G3 suffers from the similar problem, as reported in
bugzilla below.  On this machine, the codec probe error appears even
at a fresh boot.

As Libin suggested, the same workaround used for Broxton in the commit
[6639484d: ALSA: hda - disable dynamic clock gating on Broxton
 before reset] can be applied for Skylake in order to fix this problem.
The Intel HW team also confirmed that this is needed for SKL.

This patch makes the workaround applied to both SKL and BXT
platforms.  The referred macros are moved and one superfluous macro
(IS_BROXTON()) is another one (IS_BXT()) as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112731Suggested-by: NLibin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use shiny new acpi_dev_present() and remove all the boilerplate
to search for a particular ACPI device. No functional change.
Cf. 2d12b6b3 ("ACPI / utils: Add acpi_dev_present()").
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Acked-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On Intel platform, if !dyn_pcm_assign, spec->pcm_rec[].jack is not
NULL even after snd_hda_jack_tbl_clear() is called to free snd_jack.
This may cause access invalid memory when calling snd_jack_report.

Fixes: 25e4abb3 ('ALSA: hda - hdmi jack created based on pcm')
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [991f86d7: ALSA: hda - Flush the pending probe work at
remove] introduced the sync of async probe work at remove for fixing
the race.  However, this may lead to another hangup when the module
removal is performed quickly before starting the probe work, because
it issues flush_work() and it's blocked forever.

The workaround is to use cancel_work_sync() instead of flush_work()
there.

Fixes: 991f86d7 ('ALSA: hda - Flush the pending probe work at remove')
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The hda_jack_tbl entries are managed by snd_array for allowing
multiple jacks.  It's good per se, but the problem is that struct
hda_jack_callback keeps the hda_jack_tbl pointer.  Since snd_array
doesn't preserve each pointer at resizing the array, we can't keep the
original pointer but have to deduce the pointer at each time via
snd_array_entry() instead.  Actually, this resulted in the deference
to the wrong pointer on codecs that have many pins such as CS4208.

This patch replaces the pointer to the NID value as the search key.
As an unexpected good side effect, this even simplifies the code, as
only NID is needed in most cases.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some Sony VAIO AiO models (VGC-JS4EF and VGC-JS25G, both with PCI SSID
104d:9044) need the same quirk to make the speaker working properly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112031
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit 0c25ad80.

The original commit disabled the aamixer path due to the noise
problem, but it turned out that some mobo with the same PCI SSID
doesn't suffer from the issue, and the disabled function (analog
loopback) is still demanded by users.

Since the recent commit [e7fdd527: ALSA: hda - Implement loopback
control switch for Realtek and other codecs], we have the dynamic
mixer switch to enable/disable the aamix path, and we don't have to
disable the path statically any longer.  So, let's revert the
disablement, so that only the user suffering from the noise problem
can turn off the aamix on the fly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301
Reported-by: <mutedbytes@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The static checker warning is:

	sound/pci/hda/patch_hdmi.c:460 hdmi_eld_ctl_get()
	error: __memcpy() 'eld->eld_buffer' too small (256 vs 512)

I have a hard time figuring out if this can ever cause an information leak
(I don't think so), but nonetheless it does not hurt to increase the
robustness of the code.

Fixes: 68e03de9 ('ALSA: hda - hdmi: Do not expose eld data when eld is invalid')
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org> # v3.9+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Mac Mini 7,1 model with CS4208 codec reports the headphone jack
detection wrongly in an inverted way.  Moreover, the advertised pins
for the audio input and SPDIF output have actually no jack detection.

This patch addresses these issues.  The inv_jack_detect flag is set
for fixing the headphone jack detection, and the pin configs for audio
input and SPDIF output are marked as non-detectable.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105161
Report-and-tested-by: moosotc@gmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support headset mode for ALC225 platforms.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell create new platform with ALC298 codec.
This patch will enable headset mode for ALC225/ALC3253 platform.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add new support for ALC225, yet another variant of ALC298 codec.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Build chmap kctl based on pcm. The first chmap kctl will be
mapped to the first pcm, and so on.

When a monitor is connected to a pin, the chmap kctl can
find the pin and the monitor through the pcm index.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On Broxton, to make sure the reset controller works properly,
MISCBDCGE bit (bit 6) in CGCTL (0x48) of PCI configuration space
need be cleared before reset and set back to 1 after reset.
Otherwise, it may prevent the CORB/RIRB logic from being reset.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

SPDIF ctl should be based on pcm. Each spdif ctl controls
one pcm state.

This patch creates spdif based on pcm and no longer
based on pin.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Jack is created based on pcm.

Apply the acomp jack rule to dyn_pcm_assign.
For dyn_pcm_assign:
 Driver does not use hda_jack. It operates snd_jack directly.
 snd_jack pointer will be stored in spec->pcm.jack instead of
 the current spec->acomp_jack. When pcm is assigned to pin,
 jack will be assigned to pin automatically.
For !dyn_pcm_assign:
 Driver continues using hda_jack for less impact on the old cases.
 Pcm is statically assigned to pin. So is jack. spec->pcm.jack
 saves the snd_jack pointer created in hda_jack.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use struct hdmi_pcm wrapper for hdmi pcm management.
All PCM related features, like jack,  will be put in this structure.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Setup pin configuration when monitor is hotplugged
in pcm dynamic assignment if the PCM is in open state.

When monitor is disconnect, The pin will be reset.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dynamically bind/unbind the PCM to pin when HDMI/DP monitor hotplug.

When monitor is connected, find a proper PCM for the monitor.
When monitor is disconnected, unbind the PCM from the pin.

The binding policy (use Intel platform as example) is:
1. Try to use the legacy pin-pcm mapping for the device entry 0
   of the pin.
2. If step 1 fails, try to bind pin to the backup PCMs. For example,
   on Intel platform, if DP MST is enabled, 5 PCMs will be created.
   PCM 3, PCM 7, PCM 8 are supposed to be used by device entry 0 of
   pin 5, pin 6 and pin 7. PCM 9 and PCM 10 are the backup PCMs.
3. If step 2 fails, try to find any PCM to bind to the pin.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently, the driver operates the spdif based on pin.
This is ok for the current driver as pcm is statically
bound to the pin.

However, if the driver uses dynamically pcm assignment,
this will cause confusion for user space.

The patch changes spdif operation from pin based to pcm based.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pulseaudio requires open pcm successfully when probing.

This patch handles playback without monitor in dynamic pcm assignment
mode. It tries to open/prepare/close pcm successfully even there is
no pin bound to the PCM. On the meantime, it will try to find a proper
converter for the PCM.

As pcm is This patch introduces a pcm_lock in struct hdmi_spec.
This lock is used to protect:
1. the variables in struct hdmi_spec;
2. other variables shared for dynamic pcm assignment mode
3. device entry selection. As each device entry is represented by
   a separate struct struct hdmi_spec_per_pin, the lock in per_pin
   is not enough. Please see details below.

MST audio device entry operation:
1. select device entry on the pin
2. operate on the pin nid
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Begin to support dynamic PCM assignment to pin in
hdmi audio driver.

This means PCM will not be statically bound with pin.
When there is a monitor connected, the corresponding pin
will try to find a proper PCM to bind. When the monitor
is disconnected, the corresponding pin will unbind
the PCM. This helps to reduce the PCM number when there
are many pins (device entries in DP MST mode) and only
a few of them work at the same time.

This patch adds the pcm member in struct hdmi_spec_per_pin.
When PCM is dynamically bound to the pin, the member pcm
will pointer to the corresponding pcm_rec[] in hdmi_spec,
which means the hda_pcm is bound to the pin.
Signed-off-by: NLibin Yang <libin.yang@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Vendor ID 0x10de0083 is used by a yet-to-be-named GPU chip.

This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.
Signed-off-by: NAaron Plattner <aplattner@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As HD-audio driver does deferred probe internally via workqueue, the
driver might go into the mixed state doing both probe and remove when
the module gets unloaded during the probe work.  This eventually
triggers an Oops, unsurprisingly.

For avoiding this race, we just need to flush the pending probe work
explicitly before actually starting the resource release.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=960710
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>