There are several error messages that have been printing when there is
no functional issue. These messages should be available at debug message
level only.

Change-ID: Id91e47bf942c483563995f30d8705fa53acd5aa3
Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com>
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Some customers wish to be able to control our hardware specific
feature called flow director, at runtime.  This patch enables
ethtool priv flags to control this driver/hardware specific feature.

ethtool --set-priv-flags ethX flow-director-atr off

NOTE: the ethtool ntuple interface controls the flow-director
      sideband rules.

Change-ID: Iba156350b07fa2ce66f53ded51739f9a3781fe0e
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add nlflags to the function comment for ndo_bridge_setlink.

Change-ID: I34c704f307f2a3f7bac3ca4b44e2a094d3d082d6
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If the reset never completes, it is necessary to retake the
semaphore before returning, because the caller will release
the semaphore.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NDarin Miller <darin.j.miller@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch disables LRO by default in favor of GRO.

LRO is incompatible with forwarding and is disabled when forwarding
is turned on which makes the default offloads of the driver
inconsistent. LRO can still be enabled via ethtool.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NDarin Miller <darin.j.miller@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Or Gerlitz says:

====================
Mellanox driver update, Oct 14 2015

This series contains two more patches from Eli, patch from Majd
to support PCI error handlers and a fix from Jack to mlx4 VFs
when probed without a provisioned mac address.

The patch set applied on top of net-next commit bbb300eb "Merge branch 'bridge-vlan'"

changes from V0:
  - made the health flag int --> bool to address comment from Dave on patch #1
  - fixed sparse warning noted by the 0-day build tests in patch #2
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By design, when no default MAC addresses are set in the Hypervisor for VFs,
the VFs are passed zero-macs. When such a MAC is received by the VF, it
generates a random MAC address and registers that MAC address
with the Hypervisor.

This random mac generation is currently done in the mlx4_en module.
There is a problem, though, if the mlx4_ib module is loaded by a VF before
the mlx4_en module. In this case, for RoCE, mlx4_ib will see the un-replaced
zero-mac and register that zero-mac as part of QP1 initialization.

Having a zero-mac in the port's MAC table creates problems for a
Baseboard Management Console. The BMC occasionally sends packets with a
zero-mac destination MAC. If there is a zero-mac present in the port's
MAC table, the FW will send such BMC packets to the host driver rather than
to the wire, and BMC will stop working.

To address this problem, we move the replacement of zero-mac addresses
with random-mac addresses to procedure mlx4_slave_cap(), which is part of the
driver startup for VFs, and is before activation of mlx4_ib and mlx4_en.
As a result, zero-mac addresses will never be registered in the port MAC table
by the driver.

In addition, when mlx4_en does initialize the net device, it needs to set
the NET_ADDR_RANDOM flag in the netdev structure if the address was
randomly generated. This is done so that udev on the VM does not create
a new device name after each VF probe (VM boot and such). To accomplish this,
we add a per-port flag in mlx4_dev which gets set whenever mlx4_core replaces
a zero-mac with a randomly-generated mac. This flag is examined when mlx4_en
initializes the net-device.

Fix was suggested by Matan Barak <matanb@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On device initialization, wait till firmware indicates that that it is done
with initialization before proceeding to initialize the device.

Also update initialization segment layout to match driver/firmware
interface definitions.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implement the pci_error_handlers for mlx5_core which allow the
driver to recover from PCI error.

Once an error is detected in the PCI, the mlx5_pci_err_detected is called
and it:
1) Marks the device to be in 'Internal Error' state.
2) Dispatches an event to the mlx5_ib to flush all the outstanding cqes
with error.
3) Returns all the on going commands with error.
4) Unloads the driver.

Afterwards, the FW is reset and mlx5_pci_slot_reset is called and it
enables the device and restore it's pci state.

If the later succeeds, mlx5_pci_resume is called, and it loads the SW
stack.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The detection of a fatal condition has been updated to take into account
the state reported by the device or by detecting an all ones read of the
firmware version which indicates that the device is not accessible.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At listen() time, there is a small window where listener is visible with
a zero backlog, triggering a spurious "Possible SYN flooding on port"
message.

Nothing prevents us from setting the correct backlog.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we no longer hold listener lock in fast path, it is possible that a
child is created right after listener freed its bound port, if a close()
is done while incoming packets are processed.

__inet_inherit_port() must detect this and return an error,
so that caller can free the child earlier.

Fixes: e994b2f0 ("tcp: do not lock listener to process SYN packets")
Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use module_phy_driver macro to simplify the code a bit.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this patch fixes a bug in hns driver. the link led is on at the beginning,
but at this time the ethernet port is on down status. it needs to reset
the led status on init sequence.
Signed-off-by: Nlipeng <lipeng321@huawei.com>
Signed-off-by: Nyankejian <yankejian@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This helps improving the latency of small packets.
Signed-off-by: NRakesh Ranjan <rakesh@chelsio.com>
Signed-off-by: NKaren Xie <kxie@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.4-20151013' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2015-09-17

this is a pull request of 4 patches for net-next/master.

Two patches are by Gerhard Bertelsmann, fixing some problems in the
sun4i driver. The patch by Arnd Bergmann stops using timeval for the
CAN broadcast manager. The last patch by Alexandre Belloni removes the
otherwise unused struct at91_can_data from the driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this patch adds support to set promisc mode. it configs the queue on
init seq  when it is on promisc mode.and being enabled or disabled promisc
mode by upper level user.
Signed-off-by: Nyankejian <yankejian@huawei.com>
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Revert the commit e2ca690b ("ipv4/icmp: redirect messages
can use the ingress daddr as source"), which tried to introduce a more
suitable behaviour for ICMP redirect messages generated by VRRP routers.
However RFC 5798 section 8.1.1 states:

    The IPv4 source address of an ICMP redirect should be the address
    that the end-host used when making its next-hop routing decision.

while said commit used the generating packet destination
address, which do not match the above and in most cases leads to
no redirect packets to be generated.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-10-13

This series contains updates to i40e, i40evf, ixgbe and fm10k.

Carolyn cleans up ndo_bridge_getlink() by flagging a parameter as
__always_unused, since it is never used.  Adds a member to the nvm_info
struct to store OEM version info to be output either by OID or ethtool.

Neerav cleans up a remaining bit shift to use BIT() macro.

Mitch fixes the i40evf driver to properly handle calls to its
ndo_set_mac_address() method.  It did not properly check to see if the
override would be allowed by the PF driver, and it never removed the old
address from its filter list.  Cleaned up the use of
i40e_enable_vf_mappings() in i40e_alloc_vfs(), since it is just redundant
since we already call it by i40e_reset_vf().  Fixed a possible panic
in some circumstances where the firmware may fail to allocate a VSI for
a VF by checking the return value from i40e_alloc_vf_res() and don't
try to configure the device further if it failed.

Greg fixes the parsing of CEE App TLVs so the caller does not have to
consider whether the App came from a CEE or IEEE DCBx negotiation.

Shannon moves the device ids into a standalone file due to the desire
to write user-land drivers (and other requests) without needing the rest
of the include files.

Catherine adds the ability to save the module information from
get_phy_capabilities() to be used to determine which speeds the module
supports.  Also cleaned up the PHY structure by removing unused members
and add the ability to store the PHY capabilities reported by the
firmware.

Emil modifies ixgbe to ensure that flow control packets initiated by the
VF are dropped and reported as spoofed.

Jacob cleans up the fm10k driver to avoid buffer overflow by using
sprintf(), so convert to using snprintf().  Also fixed the use of an
enum as a boolean, so check for the actual value of NETREG_UNINITIALIZED
in case it ever changes from the current value of zero.

v2: Dropped patch 11 of the original series, which added functions that
    were never used.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check for actual value NETREG_UNINITIALIZED in case it ever changes from
the current value of zero.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch makes sure that flow control packets initiated by the VF are
dropped and reported as spoofed.

Flow control packets can be used to limit the throughput or as DOS
attack when generated from a VF. Flow control is not supported per VF
hence any pause frames generated from a VF are considered malicious.

Also cleaned up indentation and some redundant comments.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump.

Change-ID: If3cd42f6c1b9546beed60faf9c79faab35216f58
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove unused members in the PHY structure and add a new member to store
all the capabilities the PHY has as reported by the FW. This information
will help us determine what speeds the device is capable of when link is
down.

Also add an enum to decode the PHY types the NVM is capable of.
Use the phy_types variable to determine what phy types are possible
when link is down instead of device id as it will be more accurate.

When on a backplane device, we do not support changing any settings,
however we should display all the phy_types we are capable of so if we
see a backplane dev ID set supported and advertised purely based on
the phy_types variable.

Change-ID: Ia75d560f1fcd30c54cbfb7458690c5867559a930
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add a module_types variable to the link_info struct to save the module
information from get_phy_capabilities. This information can be used to
determine which speeds the module supports.

Also add a new function update_link_info which updates the module_types
parameter and then calls get_link_info. This function should be called
in place of get_link_info so that the module_types variable stays
up-to-date with the rest of the link information.

The EAS table does not reflect the values that are actually returned,
so instead, basing these values on the Ethernet compliance codes
specified in table 33 of SFF-8436 as these have been accurate.

Use the new variable in ethtool to differentiate between a 10G/1G dual
speed fiber module and a 10G only module.

Change-ID: Ib7585cce321319c10ce15180054c41a6cbd41389
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Due to desires to write userland drivers, and other requests, without
needing the rest of the include files, the device ids are pulled out
into a standalone file.

Change-ID: Ic0b047dbf9d4b0891892309c1f2079f56d9b60e8
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch moves the internal fw version and fw api version info to be
output in probe.  The nvm version, etrack and oem version info are now
configured for output via ethtool -i.

Change-ID: I05d490093a7137dbefcdef263d014d1e5c9e83d0
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In some circumstances, the firmware may fail to allocate a VSI for a VF.
When this happens, the driver does not react well to the bad news and
has a panic attack.

To fix this problem, check the return value from i40e_alloc_vf_res and
don't try to configure the device further if it failed. Additionally,
explicitly clear the INIT bit when we free VF resources, so that this
bit will be in the proper state in the failure case, and won't blow up
elsewhere.

Change-ID: I6a20ce2b59c3458fd832032e88fa28cd42500189
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This function call isn't needed here; the same function is already
called by i40e_reset_vf.

Change-ID: I96ccbf91b752965c9e28fe895d4c7d4c46e3ba44
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Changes the parsing of CEE App TLVs to fill in the App selector in struct
i40e_dcbx_config with the IEEE App selector so the caller doesn't have to
consider whether the App came from a CEE or IEEE DCBX negotiation.

Change-ID: Ia7d9d664cde04d2ebcc9822fd22e4929c6edab3a
Signed-off-by: NGreg Bowers <gregory.j.bowers@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a member to the nvm_info struct for oem_ver info to be
output either by OID or ethtool.

Change-ID: I1e5d513ae67622e2af17042924fdb4b5d6d85366
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The driver was not correctly handling calls to its ndo_set_mac_address
method. It did not properly check to see if the override would be
allowed by the PF driver, and never removed the old address from its
filter list.

Add a new flag to the adapter struct which is set if the MAC address is
assigned by the PF. Check this flag and don't allow the MAC address to
be changed if it is set. Search for and properly remove the filter
for the old MAC address when the new one is set.

Change-ID: I817bf620c869c5a80e6a7eab65c9cbad1dc89799
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Replace one left over (1 << up) in the i40e_dcb.c file with the BIT()
macro.

Change-ID: I39492a400a2cee5ac566143a5b436cc478bea0db
Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Flag the filter_mask parameter as __always_unused in the
ndo_bridge_getlink function.

Change-ID: Ifc1e99c7fb84bcbf81cf7b0ac891ad8ca956ffb2
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the new Port link status bit and rename the link status to function
link status.

Change-ID: I71289327ae62638ce967b6ad40114caf998b6dab
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add ip commands with examples for creating VRF devics, enslaving interfaces
and dumping VRF-focused data (address, neighbors, routes).
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use kstrdup instead of strlen-kmalloc-strcpy. Remove unneeded NULL
test, it will be tested inside kstrdup. Remove 0 length string test,
it has been tested in the caller of dsp_pipeline_build.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a TCP/DCCP listener is closed, its pending SYN_RECV request sockets
become stale, meaning 3WHS can not complete.

But current behavior is wrong :
incoming packets finding such stale sockets are dropped.

We need instead to cleanup the request socket and perform another
lookup :
- Incoming ACK will give a RST answer,
- SYN rtx might find another listener if available.
- We expedite cleanup of request sockets and old listener socket.

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct at91_can_data was used to pass a callback to the driver, allowing it
to switch the transceiver on and off. As all at91 boards are now using DT,
this is not used anymore, remove that structure.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The can subsystem communicates with user space using a bcm_msg_head
header, which contains two timestamps. This is problematic for
multiple reasons:

a) The structure layout is currently incompatible between 64-bit
   user space and 32-bit user space, and cannot work in compat
   mode (other than x32).

b) The timeval structure layout will change in 32-bit user
   space when we fix the y2038 overflow problem by redefining
   time_t to 64-bit, making new 32-bit user space incompatible
   with the current kernel interface.
   Cars last a long time and often use old kernels, so the actual
   users of this code are the most likely ones to migrate to y2038
   safe user space.

This tries to work around part of the problem by changing the
publicly visible user interface in the header, but not the binary
interface. Fortunately, the values passed around in the structure
are relative times and do not actually suffer from the y2038
overflow, so 32-bit is enough here.

We replace the use of 'struct timeval' with a newly defined
'struct bcm_timeval' that uses the exact same binary layout
as before and that still suffers from problem a) but not problem
b).

The downside of this approach is that any user space program
that currently assigns a timeval structure to these members
rather than writing the tv_sec/tv_usec portions individually
will suffer a compile-time error when built with an updated
kernel header. Fixing this error makes it work fine with old
and new headers though.

We could address problem a) by using '__u32' or 'int' members
rather than 'long', but that would have a more significant
downside in also breaking support for all existing 64-bit user
binaries that might be using this interface, which is likely
not acceptable.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-can@vger.kernel.org
Cc: linux-api@vger.kernel.org
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>