Processors that support the mips64r2 ISA can in four instructions
convert a shifted PGD pointer stored in the upper bits of c0_context
into a usable pointer.  By doing this we save a memory load and
associated potential cache miss in the TLB exception handlers.

Since the upper bits of c0_context were holding the CPU number, we
move this to the upper bits of c0_xcontext which doesn't have enough
bits to hold the PGD pointer, but has plenty for the CPU number.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Octeon SOC has two types of Ethernet ports, each type with its own
driver.  However, the PHYs for all the ports are controlled by a
common MDIO bus.  Because the mdio driver is not associated with a
particular driver, but is instead a system level resource, we create s
stand-alone driver for it.

As for the driver, we put the register definitions in
arch/mips/include/asm/octeon where most of the other Octeon register
definitions live.  This is a platform driver with the platform device
for "mdio-octeon" being registered in the platform startup code.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Reorder PT ops to avoid pipeline stalls.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The MIPS-specific macro CL_SIZE is merely aliasing the macro
COMMAND_LINE_SIZE. Other architectures use the latter; also,
COMMAND_LINE_SIZE is documented in kernel-parameters.txt, so
let's use it, and remove the alias.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Nobody is using the ARCS-specific prom_getcmdline(), so let's remove it.
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch helps to generate smaller kernel images for linux-MIPS,

Here is the effect when using lzma:

$ ls -sh vmlinux
7.1M vmlinux
$ ls -sh vmlinuz
1.5M vmlinuz

Have tested the 32bit kernel on Qemu/Malta and 64bit kernel on FuLoong
Mini PC. both of them work well. and also, tested by Alexander Clouter
on an AR7 based Linksys WAG54Gv2, and by Manuel Lauss on an Alchemy
board.

This -v2 version incorporate the feedback from Ralf, and add the
following changes:

1. add .ecoff, .bin, .erec format support
2. only enable it and the debug source code for the machines we tested
3. a dozen of fixups and cleanups

and if you want to enable it for your board, please try to select
SYS_SUPPORTS_ZBOOT for it, and if the board have an 16550 compatible
uart, you can select SYS_SUPPORTS_ZBOOT_UART16550 directly. and then
sending the relative patches to Ralf.
Tested-by: NManuel Lauss <manuel.lauss@googlemail.com>
Tested-by: NAlexander Clouter <alex@digriz.org.uk>
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

... and have the caller grab both mnt and dentry; kill
leak in infiniband, while we are at it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* hpux_pipe() - no need to take BKL
* sys32_pipe() in arch/x86/ia32 and xtensa_pipe() in arch/xtensa -
	no need at all, since both functions are open-coded sys_pipe()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: N"David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use bitmap library and kill some unused iommu helper functions.

1. s/iommu_area_free/bitmap_clear/

2. s/iommu_area_reserve/bitmap_set/

3. Use bitmap_find_next_zero_area instead of find_next_zero_area

  This cannot be simple substitution because find_next_zero_area
  doesn't check the last bit of the limit in bitmap

4. Remove iommu_area_free, iommu_area_reserve, and find_next_zero_area
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create a function to generate the value that is written to the UV hub MMR
to cause an IPI interrupt to be sent.  The function will be used in the
GRU message queue error recovery code that sends IPIs to nodes in remote
partitions.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The UV BIOS has moved the location of some of their pointers to the
"partition reserved page" from memory into a uv hub MMR.  The GRU does not
support bcopy operations from MMR space so we need to special case the MMR
addresses using VLOAD operations.

Additionally, the BIOS call for registering a message queue watchlist has
removed the 'blade' value and eliminated the structure that was being
passed in.  This is also reflected in this patch.
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a mechanism for determining if a global physical address is
pointing to a UV hub MMR.
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The UV BIOS has been updated to implement some of our interface
functionality differently than originally expected.  These patches update
the kernel to the bios implementation and include a few minor bug fixes
which prevent us from doing significant testing on real hardware.

This patch:

For SGI UV systems, translate from a global physical address back to a
socket physical address.  This does nothing to ensure the socket physical
address is actually addressable by the kernel.  That is the responsibility
of the user of the function.
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dma_mask is, when interpreted as address, the last valid byte, and hence
comparison msut also be done using the last valid of the buffer in
question.

Also fix the open-coded instances in lib/swiotlb.c.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Becky Bruce <beckyb@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently all architectures but microblaze unconditionally define
USE_ELF_CORE_DUMP.  The microblaze omission seems like an error to me, so
let's kill this ifdef and make sure we are the same everywhere.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Simek <michal.simek@petalogix.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggested by Roland.

Unlike powepc, x86 always calls tracehook_report_syscall_exit(step) with
step = 0, and sends the trap by hand.

This results in unnecessary SIGTRAP when PTRACE_SINGLESTEP follows the
syscall-exit stop.

Change syscall_trace_leave() to pass the correct "step" argument to
tracehook and remove the send_sigtrap() logic.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggested by Roland.

Implement user_single_step_siginfo() for x86.  Extract this code from
send_sigtrap().

Since x86 calls tracehook_report_syscall_exit(step => 0) the new helper is
not used yet.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suggested by Roland.

Implement user_single_step_siginfo() for powerpc.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the platform specific callback to control LCD panel and backlight
power.
Signed-off-by: NChaithrika U S <chaithrika@ti.com>
Acked-by: NKevin Hilman <khilman@deeprootsystems.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Framebuffer driver for the Landscape LCD EZ-Extender (ADZS-BFLLCD-EZEXT)
http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:landscape_lcd_ez-extenderSigned-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It has been experimentally found out, that the sensor only supports up to
512x384 video output and also has some restrictions on minimum scale. We
disable non-working size ranges until, maybe, someone finds out how to properly
set them up. Also add cropping support, an auto white balance control, platform
data to specify master clock frequency and polarity of the IOCTL pin.

 create mode 100644 include/media/rj54n1cb0c.h
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert soc-camera core and all soc-camera drivers to the new mediabus
API. This also takes soc-camera client drivers one step closer to also be
usable with generic v4l2-subdev host drivers.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

After this change drivers can be further extended to not fail, if they don't
get platform data, but to use defaults.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

se7722_fpga_irq[] is unsigned so the test does not work.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The typename member of struct irq_chip was kept for migration purposes
and is obsolete since more than 2 years. Fix up the leftovers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Use the new unreachable() macro instead of for(;;);
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

SPIN_LOCK_UNLOCKED is deprecated. Init the per cpu locks at runtime
instead.

(Also kills the unused smp_lock --kyle)
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NRandolph Chung <tausq@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Remove duplicated #include('s) in
  arch/parisc/kernel/signal.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>

Needed for commit 2c992208 ("intel-iommu: Detect DMAR in hyperspace at 
probe time.) to build on IA64.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The instruction attribute table generator fails when run by mawk
or original-awk:

 $ mawk -f arch/x86/tools/gen-insn-attr-x86.awk \
	arch/x86/lib/x86-opcode-map.txt > /dev/null
 Semantic error at 240: Second IMM error
 $ echo $?
 1

Line 240 contains "c8: ENTER Iw,Ib", which indicates that this
instruction has two immediate operands, the second of which is
one byte.  The script loops through the immediate operands using
a for loop.

Unfortunately, there is no guarantee in awk that a for (variable
in array) loop will return the indices in increasing order.
Internally, both original-awk and mawk iterate over a hash table
for this purpose, and both implementations happen to produce the
index 2 before 1.  The supposed second immediate operand is more
than one byte wide, producing the error.

So loop over the indices in increasing order instead.  As a
side-effect, with mawk this means the silly two-entry hash table
never has to be built.
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Acked-by Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091213220437.GA27718@progeny.tock>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This driver was merged before the ep93xx core support was added
for the keypad clock and acquiring/releasing the necessary gpio's.
Now that the proper support is in the ep93xx core this driver
needs to be updated to work correctly.

Summary of changes:
  1) Remove some unused members from the platform data.
  2) Remove the custom KEY macro and use the ones available in
     <linux/input/matrix_keypad.h>
  3) Remove the keypad_{readl/writel} macros and just use
     __raw_{readl/writel} directly.
  4) Update the clk_set_rate() call to work with the core support.
  5) Cleanup the probe routine and remove some unneeded messages.
  6) Use the ep93xx core functions to acquire and release the gpio's.
  7) Fix the clk_get() call to get the keypad clock.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>