- 26 11月, 2006 11 次提交
-
-
由 Catalin Marinas 提交于
dev->devt_attr is allocated in device_add() but it is never freed in device_del() in the drivers/base/core.c file (reported by kmemleak). Signed-off-by: NCatalin Marinas <catalin.marinas@gmail.com> Acked-by: NGreg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
One reiserfs_warning() call uses %lu, but doesn't supply what to print. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The correct order is: NULL check before dereference This was a guaranteed NULL dereference with debugging enabled since rs5c372_sysfs_show_osc() does actually pass NULL... Spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
I got a lockdep warning when running "rtctest" so I though it'd be good to see what was up. - The warning was for rtc->irq_task_lock, gotten from rtc_update_irq() by irq handlerss ... but in a handful of other cases, grabbed without blocking IRQs. - Some callers to rtc_update_irq() were not ensuring IRQs were blocked, yet the routine expects that; make sure all callers block IRQs. It would appear that RTC API tests haven't been part of anyone's kernel regression test suite recently, at least not with lockdep running. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
The RTC framework has an irq_set_freq() method that should be used to manage the periodic IRQ frequency, but the current ioctl logic doesn't know how to do that. This patch teaches it how. This means that drivers implementing irq_set_freq() will automatically support RTC_IRQP_{READ,SET} ioctls; that logic doesn't need duplication within the driver. [akpm@osdl.org: export rtc_irq_set_freq] Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
This updates the RTC documentation to summarize the two APIs now available: the old PC/AT one, and the new RTC class drivers. It also updates the included "rtctest.c" file to better meet Linux style guidelines, and to work with the new RTC drivers. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
debugfs needs include/linux/kobject.h for <kernel_subsys>. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vasily Tarasov 提交于
OpenVZ developers team has encountered the following problem in 2.6.19-rc6 kernel. After some seconds of running script while [[ 1 ]] do find /proc -name mountstats | xargs cat done this Oops appears: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000010 printing eip: c01a6b70 *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: xt_length ipt_ttl xt_tcpmss ipt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit ipt_tos ipt_REJECT ip_tables x_tables parport_pc lp parport sunrpc af_packet thermal processor fan button battery asus_acpi ac ohci_hcd ehci_hcd usbcore i2c_nforce2 i2c_core tg3 floppy pata_amd ide_cd cdrom sata_nv libata CPU: 1 EIP: 0060:[<c01a6b70>] Not tainted VLI EFLAGS: 00010246 (2.6.19-rc6 #2) EIP is at mountstats_open+0x70/0xf0 eax: 00000000 ebx: e6247030 ecx: e62470f8 edx: 00000000 esi: 00000000 edi: c01a6b00 ebp: c33b83c0 esp: f4105eb4 ds: 007b es: 007b ss: 0068 Process cat (pid: 6044, ti=f4105000 task=f4104a70 task.ti=f4105000) Stack: c33b83c0 c04ee940 f46a4a80 c33b83c0 e4df31b4 c01a6b00 f4105000 c0169231 e4df31b4 c33b83c0 c33b83c0 f4105f20 00000003 f4105000 c0169445 f2503cf0 f7f8c4c0 00008000 c33b83c0 00000000 00008000 c0169350 f4105f20 00008000 Call Trace: [<c01a6b00>] mountstats_open+0x0/0xf0 [<c0169231>] __dentry_open+0x181/0x250 [<c0169445>] nameidata_to_filp+0x35/0x50 [<c0169350>] do_filp_open+0x50/0x60 [<c01873d6>] seq_read+0xc6/0x300 [<c0169511>] get_unused_fd+0x31/0xc0 [<c01696d3>] do_sys_open+0x63/0x110 [<c01697a7>] sys_open+0x27/0x30 [<c01030bd>] sysenter_past_esp+0x56/0x79 ======================= Code: 45 74 8b 54 24 20 89 44 24 08 8b 42 f0 31 d2 e8 47 cb f8 ff 85 c0 89 c3 74 51 8d 80 a0 04 00 00 e8 46 06 2c 00 8b 83 48 04 00 00 <8b> 78 10 85 ff 74 03 f0 ff 07 b0 01 86 83 a0 04 00 00 f0 ff 4b EIP: [<c01a6b70>] mountstats_open+0x70/0xf0 SS:ESP 0068:f4105eb4 The problem is that task->nsproxy can be equal NULL for some time during task exit. This patch fixes the BUG. Signed-off-by: NVasily Tarasov <vtaras@openvz.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Fix bug in certain error paths of lookup routines. The request object was reused for sending FORGET, which is illegal. This bug could cause an Oops in 2.6.18. In earlier versions it might silently corrupt memory, but this is very unlikely. These error paths are never triggered by libfuse, so this wasn't noticed even with the 2.6.18 kernel, only with a filesystem using the raw kernel interface. Thanks to Russ Cox for the bug report and test filesystem. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Chou 提交于
Fix bug 7401. Handle more than one source dir or file list to the initramfs gen scripts. The Kconfig help for INITRAMFS_SOURCE claims that you can specify multiple space-separated sources in order to allow unprivileged users to build an image. There are two bugs in the current implementation that prevent this from working. First, we pass "file1 dir2" to the gen_initramfs_list.sh script, which it obviously can't open. Second, gen_initramfs_list.sh -l outputs multiple definitions for deps_initramfs -- one for each argument. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Ritz 提交于
Add required locking to dfbc9e9dSigned-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Pavol Gono <Palo.Gono@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 11月, 2006 4 次提交
-
-
由 Mel Gorman 提交于
find_min_pfn_for_node() and find_min_pfn_with_active_regions() both depend on a sorted early_node_map[]. However, sort_node_map() is being called after fin_min_pfn_with_active_regions() in free_area_init_nodes(). In most cases, this is ok, but on at least one x86_64, the SRAT table caused the E820 ranges to be registered out of order. This gave the wrong values for the min PFN range resulting in some pages not being initialised. This patch sorts the early_node_map in find_min_pfn_for_node(). It has been boot tested on x86, x86_64, ppc64 and ia64. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Acked-by: NAndre Noll <maan@systemlinux.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jean Delvare 提交于
Fix recent i2c-ixp4xx compilation breakage. Sorry for overlooking it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Jones 提交于
processor_perflib.c::acpi_processor_ppc_notifier() check if the value returned by the processor's _PPC method is 0 and return failed if so. This is wrong since 0 indicate that the bios think the processor can go to the highest frequency. This patch for example fix the HP NX 6125 to allow its highest frequency to be available. Signed-off-by: NBruno Ducrot <ducrot@poupinou.org> Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3941/1: [Jornada7xx] - Addition to MAINTAINERS [ARM] 3942/1: ARM: comment: consistent_sync should not be called directly [ARM] ebsa110: fix warnings generated by asm/arch/io.h [ARM] 3933/1: Source drivers/ata/Kconfig
-
- 23 11月, 2006 8 次提交
-
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [PATCH] make au1xxx-ide compile again [MIPS] Hack for SB1 cache issues
-
由 Manuel Lauss 提交于
The Au1xx IDE controller driver doesn't compile: CC drivers/ide/mips/au1xxx-ide.o /linux-2.6.19-rc6-work/drivers/ide/mips/au1xxx-ide.c:480: error: conflicting types for 'auide_ddma_tx_callback' include2/asm/mach-au1x00/au1xxx_ide.h:174: error: previous declaration of 'auide_ddma_tx_callback' was here /linux-2.6.19-rc6-work/drivers/ide/mips/au1xxx-ide.c:486: error: conflicting types for 'auide_ddma_rx_callback' include2/asm/mach-au1x00/au1xxx_ide.h:176: error: previous declaration of 'auide_ddma_rx_callback' was here Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
Removing flush_icache_page a while ago broke SB1 which was using an empty flush_data_cache_page function. This glues things well enough so a more efficient but also more intrusive solution can be found later. Signed-Off-By: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
Not all graphic page remappers support physical addresses over the 4GB mark for remapping, so while some do (the AMD64 GART always did, and I just fixed the i965 to do so properly), we're safest off just forcing GFP_DMA32 allocations to make sure graphics pages get allocated in the low 32-bit address space by default. AGP sub-drivers that really care, and can do better, could just choose to implement their own allocator (or we could add another "64-bit safe" default allocator for their use), but quite frankly, you're not likely to care in practice. So for now, this trivial change means that we won't be allocating pages that we can't map correctly by mistake on x86-64. [ On traditional 32-bit x86, this could never happen, because GFP_KERNEL would never allocate any highmem memory anyway ] Acked-by: NAndi Kleen <ak@suse.de> Acked-by: NDave Jones <davej@redhat.com> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kristoffer Ericson 提交于
Adding myself to the MAINTAINERS file. Signed-off-by: NKristoffer Ericson <Kristoffer_e1@hotmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dan Williams 提交于
/* * Note: Drivers should NOT use this function directly, as it will break * platforms with CONFIG_DMABOUNCE. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
This introduces a i965-specific "mask_memory()" function that knows about the extended physical addresses that the i965 supports. This allows us to correctly map in physical memory in the >4GB range into the GTT. Also simplify/clean-up the i965 case for the aperture sizing by just returning the fixed 512kB size from "fetch_size()". We don't really care that not all of the aperture may be visible - the only thing that cares about the aperture size is the Intel "stolen memory" calculation, which depends on the fixed size. Cc: Keith Packard <keithp@keithp.com> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This reverts commit f72fa707, and solves the problem that it tried to fix by simply making "__do_IRQ()" call the note_interrupt() function without the lock held, the way everybody else does. It should be noted that all interrupt handling code must never allow the descriptor actors to be entered "recursively" (that's why we do all the magic IRQ_PENDING stuff in the first place), so there actually is exclusion at that much higher level, even in the absense of locking. Acked-by: NVivek Goyal <vgoyal@in.ibm.com> Acked-by: NPavel Emelianov <xemul@openvz.org> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 11月, 2006 17 次提交
-
-
由 Linus Torvalds 提交于
* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix ucc_geth of_device discovery on mpc832x [POWERPC] Revert "[POWERPC] Add powerpc get/set_rtc_time interface to new generic rtc class" [POWERPC] Revert "[POWERPC] Enable generic rtc hook for the MPC8349 mITX"
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Add missing unlock in tg3_open() error path. [IPV6]: Fix address/interface handling in UDP and DCCP, according to the scoping architecture. [IRDA]: Lockdep fix. [BLUETOOTH]: Fix unaligned access in hci_send_to_sock. [XFRM]: nlmsg length not computed correctly in the presence of subpolicies [XFRM]: Sub-policies broke policy events [IGMP]: Fix IGMPV3_EXP() normalization bit shift value. [Bluetooth] Ignore L2CAP config requests on disconnect [Bluetooth] Always include MTU in L2CAP config responses [Bluetooth] Check if RFCOMM session is still attached to the TTY [Bluetooth] Handling pending connect attempts after inquiry [Bluetooth] Attach low-level connections to the Bluetooth bus [IPV6] IP6TUNNEL: Add missing nf_reset() on input path. [IPV6] IP6TUNNEL: Delete all tunnel device when unloading module. [IPV6] ROUTE: Do not enable router reachability probing in router mode. [IPV6] ROUTE: Prefer reachable nexthop only if the caller requests. [IPV6] ROUTE: Try to use router which is not known unreachable.
-
由 Kim Phillips 提交于
mpc832x, as in mpc8360, needs to explicitly find and create the platform device for ucc_geth in 2.6.19. This code will likely be readapted to Benh's new of_ methods for 2.6.20. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ira W. Snyder 提交于
Sparse noticed a locking imbalance in tg3_open(). This patch adds an unlock to one of the error paths, so that tg3_open() always exits without the lock held. Signed-off-by: NIra W. Snyder <kernel@irasnyder.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
TCP and RAW do not have this issue. Closes Bug #7432. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Zijlstra 提交于
On Sat, 2006-11-18 at 16:12 +0300, Andrey Borzenkov wrote: > ============================================= > [ INFO: possible recursive locking detected ] > 2.6.19-rc5-2avb #2 > - --------------------------------------------- > pppd/26425 is trying to acquire lock: > (&hashbin->hb_spinlock){....}, at: [<dfdea87a>] irlmp_slsap_inuse+0x5a/0x170 > [irda] > > but task is already holding lock: > (&hashbin->hb_spinlock){....}, at: [<dfdea857>] irlmp_slsap_inuse+0x37/0x170 > [irda] > > other info that might help us debug this: > 1 lock held by pppd/26425: > #0: (&hashbin->hb_spinlock){....}, at: [<dfdea857>] > irlmp_slsap_inuse+0x37/0x170 [irda] > > stack backtrace: > [<c010413c>] dump_trace+0x1cc/0x200 > [<c010418a>] show_trace_log_lvl+0x1a/0x30 > [<c01047f2>] show_trace+0x12/0x20 > [<c01048c9>] dump_stack+0x19/0x20 > [<c01346ca>] __lock_acquire+0x8fa/0xc20 > [<c0134d2d>] lock_acquire+0x5d/0x80 > [<c02a851c>] _spin_lock+0x2c/0x40 > [<dfdea87a>] irlmp_slsap_inuse+0x5a/0x170 [irda] > [<dfdebab2>] irlmp_open_lsap+0x62/0x180 [irda] > [<dfdf35d1>] irttp_open_tsap+0x181/0x230 [irda] > [<dfdc0c3d>] ircomm_open_tsap+0x5d/0xa0 [ircomm] > [<dfdc05d8>] ircomm_open+0xb8/0xd0 [ircomm] > [<dfdd0477>] ircomm_tty_open+0x4f7/0x570 [ircomm_tty] > [<c020bbe4>] tty_open+0x174/0x340 > [<c016bd69>] chrdev_open+0x89/0x170 > [<c0167bd6>] __dentry_open+0xa6/0x1d0 > [<c0167da5>] nameidata_to_filp+0x35/0x40 > [<c0167df9>] do_filp_open+0x49/0x50 > [<c0167e47>] do_sys_open+0x47/0xd0 > [<c0167f0c>] sys_open+0x1c/0x20 > [<c010307d>] sysenter_past_esp+0x56/0x8d > [<b7f86410>] 0xb7f86410 > ======================= The comment at the nesting lock says: /* Careful for priority inversions here ! * irlmp->links is never taken while another IrDA * spinlock is held, so we are safe. Jean II */ So, under the assumption the author was right, it just needs a lockdep annotation. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kim Phillips 提交于
This reverts commit 7a69af63. As advised by David Brownell: http://marc.theaimsgroup.com/?l=linux-kernel&m=116387226902131&w=2Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kim Phillips 提交于
This reverts commit a8ed4f7e. As advised by David Brownell: http://marc.theaimsgroup.com/?l=linux-kernel&m=116387226902131&w=2Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David S. Miller 提交于
The "u16 *" derefs of skb->data need to be wrapped inside of a get_unaligned(). Thanks to Gustavo Zacarias for the bug report. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
I actually dont have a test case for these; i just found them by inspection. Refer to patch "[XFRM]: Sub-policies broke policy events" for more info Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Acked-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jamal Hadi Salim 提交于
XFRM policy events are broken when sub-policy feature is turned on. A simple test to verify this: run ip xfrm mon on one window and add then delete a policy on another window .. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Acked-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David L Stevens 提交于
The IGMPV3_EXP() macro doesn't correctly shift the normalization bit, so time-out values are longer than they should be. Thanks to Dirk Ooms for finding the problem in IGMPv3 - MLDv2 had a similar problem that was already fixed a year ago. :-( Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
Any L2CAP connection in disconnecting state shall not response to any further config requests from the remote side. So in case such a request is received, ignore it. Signed-off-by: NVille Tervo <ville.tervo@nokia.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
When sending a positive config response it shall include the actual MTU to be used on this channel. This differs from the Bluetooth 1.1 specification where it was enough to acknowledge the config request. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
If the RFCOMM session is no longer attached to the TTY device, then it makes no sense to go through with changing the termios settings. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
To receive uvents for the low-level ACL and SCO links, they must be assigned to a subsystem. It is enough to attach them to the already established Bluetooth bus. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-