[ Upstream commit d3c6dd1fb30d3853c2012549affe75c930f4a2f9 ]

During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.

In particular, we get struck by commit 0e2f733addbf ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.

v2: Avoid calling into timeline_fence_release() from under the spinlock

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Fixes: d3862e44 ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733addbf ("dma-buf: make dma_fence structure a bit smaller v2")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.ukSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dccc96abfb21dc19d69e707c38c8ba439bba7160 ]

The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.

See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c19 ("scsi: Implement per-cpu logging buffer") # v4.0.
Reported-by: NJan Palus <jpalus@fastmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Palus <jpalus@fastmail.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5e75ea9c67433a065b0e8595ad3c91c7c0ca0d2d ]

The number of config registers for different pll clocks probably are not
same, so we have to use malloc, and should free the memory before return.

Fixes: 3e37b005 ("clk: sprd: add adjustable pll support")
Signed-off-by: NChunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: NChunyan Zhang <zhang.lyra@gmail.com>
Link: https://lkml.kernel.org/r/20190905103009.27166-1-zhang.lyra@gmail.comSigned-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 78c86458a440ff356073c21b568cb58ddb67b82b ]

There is clock controller functionality in the APCS hardware block of
qcs404 devices similar to msm8916.
Co-developed-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NNiklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NJassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e7ca44ed3ba77fc26cf32650bb71584896662474 ]

Since commit 4388c9b3 ("powerpc: Do not send system reset request
through the oops path"), pstore dmesg file is not updated when dump is
triggered from HMC. This commit modified system reset (sreset) handler
to invoke fadump or kdump (if configured), without pushing dmesg to
pstore. This leaves pstore to have old dmesg data which won't be much
of a help if kdump fails to capture the dump. This patch fixes that by
calling kmsg_dump() before heading to fadump ot kdump.

Fixes: 4388c9b3 ("powerpc: Do not send system reset request through the oops path")
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NGanesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904075949.15607-1-ganeshgr@linux.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 69a6bcde7fd3fe6f3268ce26f31d9d9378384c98 ]

Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.
Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.comAcked-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 920fdab7b3ce98c14c840261e364f490f3679a62 ]

On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined
when CONFIG_OPTIMIZE_INLINING is set.
Clang then fails a compile-time assertion, because it cannot tell at
compile time what the size of the argument is:

mm/memcontrol.o: In function `__cmpxchg_mb':
memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175'
memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175'

Mark all of the cmpxchg() style functions as __always_inline to
ensure that the compiler can see the result.
Acked-by: NNick Desaulniers <ndesaulniers@google.com>
Reported-by: NNathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/648Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Tested-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NAndrew Murray <andrew.murray@arm.com>
Tested-by: NAndrew Murray <andrew.murray@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cb0438e4436085d89706b5ccfce4d5da531253de ]

Hi i tried to use the uart_C of the the odroid-c2.

I enabled it in the dts file. During boot it crashed when the
the sdcard slot is addressed.

After long search in the net i found this:

https://forum.odroid.com/viewtopic.php?f=139&t=25371&p=194370&hilit=uart_C#p177856

After changing the pin definitions accordingly erverything works.
Uart_c is functioning and sdcard ist working.

Fixes: 6db0f3a8 ("pinctrl: amlogic: gxbb: add more UART pins")
Signed-off-by: NOtto Meier <gf435@gmx.net>
Link: https://lore.kernel.org/r/1cc32a18-464d-5531-7a1c-084390e2ecb1@gmx.netSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
	/*
	 * We should already be hard disabled here. We had bugs
	 * where that wasn't the case so let's dbl check it and
	 * warn if we are wrong. Only do that when IRQ tracing
	 * is enabled as mfmsr() can be costly.
	 */
	if (WARN_ON_ONCE(mfmsr() & MSR_EE))
		__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2 ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5e4b7e82d497580bc430576c4c9bce157dd72512 ]

Some MMC cards fail to enumerate properly when inserted into an MMC slot
on sdm845 devices. This is because the clk ops for qcom clks round the
frequency up to the nearest rate instead of down to the nearest rate.
For example, the MMC driver requests a frequency of 52MHz from
clk_set_rate() but the qcom implementation for these clks rounds 52MHz
up to the next supported frequency of 100MHz. The MMC driver could be
modified to request clk rate ranges but for now we can fix this in the
clk driver by changing the rounding policy for this clk to be round down
instead of round up.

Fixes: 06391edd ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
Reported-by: NDouglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20190830195142.103564-1-swboyd@chromium.orgReviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 83b8a3fbe3aa82ac3c253b698ae6a9be2dbdd5e0 ]

Leaving granularity at 1ns because it is dependent on the specific
attached backing pstore module. ramoops has microsecond resolution.

Fix the readback of ramoops fractional timestamp microseconds,
which has incorrectly been reporting the value as nanoseconds.

Fixes: 3f8f80f0 ("pstore/ram: Read and write to the 'compressed' flag of pstore").
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NJeff Layton <jlayton@kernel.org>
Cc: anton@enomsg.org
Cc: ccross@android.com
Cc: keescook@chromium.org
Cc: tony.luck@intel.com
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Fixes: 62a37553 ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b5a41620bb88efb9fb31a4fa5e652e3d5bead7d4 ]

[Description]
port spdif fix to staging:
 spdif hardwired to afmt inst 1.
 spdif func pointer
 spdif resource allocation (reserve last audio endpoint for spdif only)
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f787216f33ce5b5a2567766398f44ab62157114c ]

The CPG/MSSR Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down.  Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.

Note that this only affects RZ/A2 SoCs.  On R-Car Gen2 and Gen3 SoCs,
the R-Car SYSC driver handles Clock Domain creation, and offloads only
device attachment/detachment to the CPG/MSSR driver.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a459a184c978ca9ad538aab93aafdde873953f30 ]

The CPG/MSTP Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down.  Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.

This also gets rid of a boot warning when the Clock Domain contains an
IRQ-safe device, e.g. on RZ/A1:

    sh_mtu2 fcff0000.timer: PM domain cpg_clocks will not be powered off
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d21b8adbd475dba19ac2086d3306327b4a297418 ]

When cold-booting Asus X434DA, GPIO 7 is found to be already configured
as an interrupt, and the GPIO level is found to be in a state that
causes the interrupt to fire.

As soon as pinctrl-amd probes, this interrupt fires and invokes
amd_gpio_irq_handler(). The IRQ is acked, but no GPIO-IRQ handler was
invoked, so the GPIO level being unchanged just causes another interrupt
to fire again immediately after.

This results in an interrupt storm causing this platform to hang
during boot, right after pinctrl-amd is probed.

Detect this situation and disable the GPIO interrupt when this happens.
This enables the affected platform to boot as normal. GPIO 7 actually is
the I2C touchpad interrupt line, and later on, i2c-multitouch loads and
re-enables this interrupt when it is ready to handle it.

Instead of this approach, I considered disabling all GPIO interrupts at
probe time, however that seems a little risky, and I also confirmed that
Windows does not seem to have this behaviour: the same 41 GPIO IRQs are
enabled under both Linux and Windows, which is a far larger collection
than the GPIOs referenced by the DSDT on this platform.
Signed-off-by: NDaniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190814090540.7152-1-drake@endlessm.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a1af2afbd244089560794c260b2d4326a86e39b6 ]

Some, mostly Fermi, vbioses appear to have zero max voltage. That causes Nouveau to not parse voltage entries, thus users not being able to set higher clocks.

When changing this value Nvidia driver still appeared to ignore it, and I wasn't able to find out why, thus the code is ignoring the value if it is zero.

CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMark Menzynski <mmenzyns@redhat.com>
Reviewed-by: NKarol Herbst <kherbst@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 92c8026854c25093946e0d7fe536fd9eac440f06 ]

vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable().  However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device.  Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.

Fixes: 890ed578 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: Nhexin <hexin15@baidu.com>
Signed-off-by: NLiu Qi <liuqi16@baidu.com>
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit aa06e3d60e245284d1e55497eb3108828092818d ]

The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.

However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).

To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.

Also clear the flag during eeh_handle_special_event(), for the same
reasons.
Signed-off-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8ca5629d27de74c957d4f4b250177d1b6fc4bbd.1565930772.git.sbobroff@linux.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c2cf351eba2ff6002ce8eb178452219d2521e38e ]

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.
Acked-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NDmitry Osipenko <digetx@gmail.com>
Signed-off-by: NSowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.
Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.frSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c3e0dbd7f780a58c4695f1cd8fc8afde80376737 ]

Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in
the OPAL logs and also outputs some of the fields of the internal XIVE
structures in Linux. The OPAL calls can only be done on baremetal
(PowerNV) and they crash a pseries machine. Fix by checking the
hypervisor feature of the CPU.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1a4549c150e27dbc3aea762e879a88209df6d1a5 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190815160020.183334-3-sboyd@kernel.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f6c90df8e7e33c3dc33d4d7471bc42c232b0510e ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-8-sboyd@kernel.orgAcked-by: NBaolin Wang <baolin.wang@linaro.org>
Acked-by: NChunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit af55dadfbce35b4f4c6247244ce3e44b2e242b84 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cf9ec1fc6d7cceb73e7f1efd079d2eae173fdf57 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-2-sboyd@kernel.org
[sboyd@kernel.org: Move name to after checking for error or NULL hw]
Acked-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c37c792dec0929dbb6360a609fb00fa20bb16fc2 ]

We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.

This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.

As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.

To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.

This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.

While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.

[1]:
===
BUG: sleeping function called from invalid context at mm/page_alloc.c:4596
in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1
2 locks held by scsi_eh_1/1038:
 #0: 000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80
 #1: 0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0
irq event stamp: 500
hardirqs last  enabled at (499): [<c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (500): [<c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120
softirqs last  enabled at (0): [<c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634
Call Trace:
[c000003d064cef50] [c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable)
[c000003d064cefa0] [c00000000014ed78] ___might_sleep+0x2f8/0x310
[c000003d064cf020] [c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560
[c000003d064cf220] [c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130
[c000003d064cf290] [c0000000000c2888] pnv_tce+0x128/0x3b0
[c000003d064cf360] [c0000000000c2c00] pnv_tce_build+0xb0/0xf0
[c000003d064cf3c0] [c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0
[c000003d064cf400] [c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550
[c000003d064cf510] [c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0
[c000003d064cf530] [c000000000863944] ata_qc_issue+0x134/0x470
[c000003d064cf5b0] [c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0
[c000003d064cf700] [c0000000008642d0] ata_exec_internal+0x90/0xe0
[c000003d064cf780] [c0000000008650ac] ata_dev_read_id+0x2ec/0x640
[c000003d064cf8d0] [c000000000878e28] ata_eh_recover+0x948/0x16d0
[c000003d064cfa10] [c00000000087d760] sata_pmp_error_handler+0x480/0xbf0
[c000003d064cfbc0] [c000000000884624] ahci_error_handler+0x74/0xe0
[c000003d064cfbf0] [c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0
[c000003d064cfca0] [c00000000087a544] ata_scsi_error+0xb4/0x100
[c000003d064cfd00] [c000000000802450] scsi_error_handler+0x120/0x510
[c000003d064cfdb0] [c000000000140c48] kthread+0x1b8/0x1c0
[c000003d064cfe20] [c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
irq event stamp: 2305

========================================================
hardirqs last  enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G        W
softirqs last  enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
 (fs_reclaim){+.+.}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               local_irq_disable();
                               lock(&(&host->lock)->rlock);
                               lock(fs_reclaim);
  <Interrupt>
    lock(&(&host->lock)->rlock);

 *** DEADLOCK ***

no locks held by swapper/0/0.

the shortest dependencies between 2nd lock and 1st lock:
 -> (fs_reclaim){+.+.} ops: 167579 {
    HARDIRQ-ON-W at:
                      lock_acquire+0xf8/0x2a0
                      fs_reclaim_acquire.part.23+0x44/0x60
                      kmem_cache_alloc_node_trace+0x80/0x590
                      alloc_desc+0x64/0x270
                      __irq_alloc_descs+0x2e4/0x3a0
                      irq_domain_alloc_descs+0xb0/0x150
                      irq_create_mapping+0x168/0x2c0
                      xics_smp_probe+0x2c/0x98
                      pnv_smp_probe+0x40/0x9c
                      smp_prepare_cpus+0x524/0x6c4
                      kernel_init_freeable+0x1b4/0x650
                      kernel_init+0x2c/0x148
                      ret_from_kernel_thread+0x5c/0x70
    SOFTIRQ-ON-W at:
                      lock_acquire+0xf8/0x2a0
                      fs_reclaim_acquire.part.23+0x44/0x60
                      kmem_cache_alloc_node_trace+0x80/0x590
                      alloc_desc+0x64/0x270
                      __irq_alloc_descs+0x2e4/0x3a0
                      irq_domain_alloc_descs+0xb0/0x150
                      irq_create_mapping+0x168/0x2c0
                      xics_smp_probe+0x2c/0x98
                      pnv_smp_probe+0x40/0x9c
                      smp_prepare_cpus+0x524/0x6c4
                      kernel_init_freeable+0x1b4/0x650
                      kernel_init+0x2c/0x148
                      ret_from_kernel_thread+0x5c/0x70
    INITIAL USE at:
                     lock_acquire+0xf8/0x2a0
                     fs_reclaim_acquire.part.23+0x44/0x60
                     kmem_cache_alloc_node_trace+0x80/0x590
                     alloc_desc+0x64/0x270
                     __irq_alloc_descs+0x2e4/0x3a0
                     irq_domain_alloc_descs+0xb0/0x150
                     irq_create_mapping+0x168/0x2c0
                     xics_smp_probe+0x2c/0x98
                     pnv_smp_probe+0x40/0x9c
                     smp_prepare_cpus+0x524/0x6c4
                     kernel_init_freeable+0x1b4/0x650
                     kernel_init+0x2c/0x148
                     ret_from_kernel_thread+0x5c/0x70
  }
===
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-4-aik@ozlabs.ruSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e5382701c3520b3ed66169a6e4aa6ce5df8c56e0 ]

[Why]
The vm config will be clear to 0 when system enter S4. It will
cause hubbub didn't know how to fetch data when system resume.
The flip always pending because earliest_inuse_address and
request_address are different.

[How]
Reprogram VM config when system resume
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1cbcfc975164f397b449efb17f59d81a703090db ]

[Why]
When endpoint is at the boundary of a region, such as at 2^0=1
we find that the last segment has a sharp slope and some points
are clipped at the top.

[How]
If end point is 1, which is exactly at the 2^0 region boundary, we
need to program an additional region beyond this point.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 720099603d1f62e37b789366d7e89824b009ca28 ]

The MMC2 clock slices are currently not defined in V3s CCU driver, which
makes MMC2 not working.

Fix this issue.

Fixes: d0f11d14 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: NIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a95fb581b144b5e73da382eaedb2e32027610597 ]

drivers/clk/clk-qoriq.c:138:38: warning: unused variable
'p5020_cmux_grp1' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp1

drivers/clk/clk-qoriq.c:146:38: warning: unused variable
'p5020_cmux_grp2' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp2

In the definition of the p5020 chip, the p2041 chip's info was used
instead.  The p5020 and p2041 chips have different info. This is most
likely a typo.

Link: https://github.com/ClangBuiltLinux/linux/issues/525
Cc: clang-built-linux@googlegroups.com
Signed-off-by: NNathan Huckleberry <nhuck@google.com>
Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.comReviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NScott Wood <oss@buserror.net>
Signed-off-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]

ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.

This was originally added so firmware updates through IPMI would
complete in a timely manner.  But we can't kill the scheduler
locks for that one use case.

Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0df3e42167caaf9f8c7b64de3da40a459979afe8 ]

When building with -Wsometimes-uninitialized, clang warns:

drivers/pci/hotplug/rpaphp_core.c:243:14: warning: variable 'fndit' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
        for (j = 0; j < entries; j++) {
                    ^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:256:6: note: uninitialized use occurs
here
        if (fndit)
            ^~~~~
drivers/pci/hotplug/rpaphp_core.c:243:14: note: remove the condition if
it is always true
        for (j = 0; j < entries; j++) {
                    ^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:233:14: note: initialize the variable
'fndit' to silence this warning
        int j, fndit;
                    ^
                     = 0

fndit is only used to gate a sprintf call, which can be moved into the
loop to simplify the code and eliminate the local variable, which will
fix this warning.

Fixes: 2fcf3ae5 ("hotplug/drc-info: Add code to search ibm,drc-info property")
Suggested-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Acked-by: NTyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: NJoel Savitz <jsavitz@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/504
Link: https://lore.kernel.org/r/20190603221157.58502-1-natechancellor@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.
Signed-off-by: NKyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ad309284a52be47c8b3126c9376358bf381861bc ]

Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.runSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit afd6d4f5a52c16e1483328ac074abb1cde92c29f ]

The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port

Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.comSigned-off-by: NSasha Levin <sashal@kernel.org>