Add the .reset method to the HCD, and update the .start method
accordingly for this change.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add OHCI shutdown methods to cleanly shutdown the OHCI controller on
system shutdowns and reboots.  This avoids the controller continuing
to run should be soft-reboot the platform, potentially scribbling
over system memory.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Combine usb_hcd_sa1111_probe() and ohci_hcd_sa1111_drv_probe(), doing
the same for the remove methods.

Move sa1111_start_hc and sa1111_stop_hc to be located next to these
the probe/release functions, as they're only called from them.

Get rid of the /*----*/ breaker lines.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use dev_dbg() instead, it's more friendly.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Clean up the ohci-sa1111 driver formatting to be more compliant with
current standards, and add 'static' to various function definitions
to avoid sparse complaints about undeclared functions.  Remove the
unnecessary local declaration of 'usb_disabled', which can be found
instead in linux/usb.h.
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The sa1111 support will ioremap() the device; there is no need for
platforms to setup a static mapping for this.  Remove the static
mapping for this device from badge4, jornada720 and neponset.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use dev_err() to report device specific errors rather than printk().
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the releasing of resources out of the release function - this
allows a cleaner and more conventional arrangement of the registration
failure paths and a saner unregistration process for these devices.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It's pointless registering the PS/2 interfaces with the dmabounce code
when there's no DMA support for these in hardware, so only setup the
DMA masks for two subdevices which support DMA - the OHCI and SAC.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use the bus notifier to register sa1111 devices with dmabounce, rather
than after the device has been registered, potentially racing with
driver binding.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the USB interface register definitions into the driver, rather
than keeping them in a common place.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the PCMCIA interface register definitions into the driver, rather
than keeping them in a common place.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the PS/2 interface register definitions into the driver, rather
than keeping them in a common location.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Get rid of the unused GPIO register definitions - we access GPIO
registers through the base + offset method, and having the phys
address definitions is unnecessary duplication.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Some platforms don't want certain devices to be registered, because,
eg, the interface is not wired.  Provide a way for platforms to
prevent various devices from being registered via a devid bitmask in
the platform data.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Change the sa1111 device id to be a bitmask.  This allows us to
specify the actual device, while allowing a single driver to bind
to both PS2 devices.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the handling of the 5v supply into badge4.c, removing this board
specific detail from the sa1111 ohci driver.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add platform hooks to be called when individual sa1111 devices are
enabled and disabled.  This will allow us to move some platform
specifics out of the individual drivers.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a shutdown hook to the sa1111_driver structure to allow drivers
to be notified of system reboots and shutdowns.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Implement the necessary allocation/freeing functionality to support
sparse IRQs with the SA-1111 device.  On non-sparse IRQ platforms,
this allows us to dynamically allocate from within the available IRQ
number space.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 19851c58 (sa1111: allow cascaded IRQs to be used by platforms)
moved the IRQ definitions to the .c file, and added an irq_base member
to the private data structure.

The inerrupt demultiplexer uses irq_base, but the interrupt setup code
does not.  Also, although the commit adds a private data structure to
pass this data, it isn't even referenced, resulting in irq_base being
zero.

We also copied the IRQ numbers from the device info array into the actual
devices, resulting in wrong interrupt numbers passed to the sub-devices.

The net effect of this is that we always overwrite IRQs 0-54, even if
they are allocated elsewhere in the system.

Add the code necessary to setup the private irq_base, and use it in the
IRQ setup code.  Make the SA-1111 probe fail with -EINVAL if there is no
platform data provided.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a .owner initializer to the sa1111 driver structures to allow
allow the modules to be associated with their driver structures.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add an initializer for the struct device_driver .owner member.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We should not write to the SA1111 registers after setting the SLEEP
bit.  Moreover, the manual says that the PWM registers should be
disabled before we enter sleep.  So, move the clearing of these
registers earlier in the suspend sequence.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We weren't re-enabling the memory request/grant signals on resume,
causing DMA devices on the sa1111 to fail.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

One patch fixes an bug in the ARM/MSM IOMMU code which returned sucess
in the unmap function even when an error occured and the other patch
adds a workaround into the AMD IOMMU driver to better handle broken IVRS
ACPI tables (this patch fixes the case when a device is not listed in
the table but actually translated by the iommu).

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/msm: Fix error handling in msm_iommu_unmap()
  iommu/amd: Work around broken IVRS tables

This series contains pending target bug-fixes and cleanups for v3.3-rc3
that have been addressed the past weeks in lio-core.git.

Some of the highlights include:

 - Fix handling for control CDBs with data greater than PAGE_SIZE (andy)
 - Use IP_FREEBIND for iscsi-target to address network portal creation
   issues with systemd (dax)
 - Allow PERSISTENT RESERVE IN for non-reservation holder (marco)
 - Fix iblock se_dev_attrib.unmap_granularity (marco)
 - Fix unsupported WRITE_SAME sense payload handling (martin)
 - Add workaround for zero-length control CDB handling (nab)
 - Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT (nab)
 - Fix target_submit_cmd() exception handling (nab)
 - Return correct ASC for unimplemented VPD pages (roland)
 - Don't zero pages used for data buffers (roland)
 - Fix return code of core_tpg_.*_lun (sebastian)

* '3.3-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Fix unsupported WRITE_SAME sense payload
  iscsi: use IP_FREEBIND socket option
  iblock: fix handling of large requests
  target: handle empty string writes in sysfs
  iscsi_target: in_aton needs linux/inet.h
  target: Fix iblock se_dev_attrib.unmap_granularity
  target: Fix target_submit_cmd() exception handling
  target: Change target_submit_cmd() to return void
  target: accept REQUEST_SENSE with 18bytes
  target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
  target: Return correct ASC for unimplemented VPD pages
  iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
  target: Allow control CDBs with data > 1 page
  iscsi-target: Fix up a few assignments
  iscsi-target: make one-bit bitfields unsigned
  iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
  iscsi-target: Fix reject release handling in iscsit_free_cmd()
  target: fix return code of core_tpg_.*_lun
  target: use save/restore lock primitive in core_dec_lacl_count()
  target: avoid multiple outputs in scsi_dump_inquiry()
  ...

Some simple md-related fixes.

1/ two small fixes to ensure we handle an interrupted resync properly.
2/ avoid loading the bitmap multiple times in dm-raid

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md: two small fixes to handling interrupt resync.
  Prevent DM RAID from loading bitmap twice.

SPI bug fixes for v3.3-rc2

Minor SPI device driver changes.  A rename of the pch_spi_pcidev symbol
that merely eliminates a modpost warning, and a Kconfig change to allow
the Samsung spi driver to build on EXYNOS.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver
  spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4

Five fixes

* branch 'akpm':
  pcmcia: fix socket refcount decrementing on each resume
  mm: fix UP THP spin_is_locked BUGs
  drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax
  mm: compaction: check for overlapping nodes during isolation for migration
  nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments()

This fixes a memory-corrupting bug: not only does it cause the warning,
but as a result of dropping the refcount to zero, it causes the
pcmcia_socket0 device structure to be freed while it still has
references, causing slab caches corruption.  A fatal oops quickly
follows this warning - often even just a 'dmesg' following the warning
causes the kernel to oops.

While testing suspend/resume on an ARM device with PCMCIA support, and a
CF card inserted, I found that after five suspend and resumes, the
kernel would complain, and shortly die after with slab corruption.

  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()

As the message doesn't give a clue about which kobject, and the built-in
debugging in drivers/base/power/main.c happens too late, this was added
right before each get_device():

  printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount));

and on the 3rd s2ram cycle, the following behaviour observed:

On the 3rd suspend/resume cycle:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend: c1a0d998 [pcmcia_socket0] 3
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3
  dpm_resume: c1a0d998 [pcmcia_socket0] 3
  dpm_complete: c1a0d998 [pcmcia_socket0] 2

4th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend: c1a0d998 [pcmcia_socket0] 2
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2
  dpm_resume: c1a0d998 [pcmcia_socket0] 2
  dpm_complete: c1a0d998 [pcmcia_socket0] 1

5th:

  dpm_prepare: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend: c1a0d998 [pcmcia_socket0] 1
  dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1
  dpm_resume: c1a0d998 [pcmcia_socket0] 1
  dpm_complete: c1a0d998 [pcmcia_socket0] 0
  ------------[ cut here ]------------
  WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50()
  Modules linked in: ucb1x00_core
  Backtrace:
  [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c)
  [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68)
  [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28)
  [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50)
  [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24)
  [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20)
  ...

Looking at commit 7b24e798 ("pcmcia: split up central event handler"),
the following change was made to cs.c:

                return 0;
        }
 #endif
-
-       send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+       if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+               skt->callback->early_resume(skt);
        return 0;
 }

And the corresponding change in ds.c is from:

-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-       struct pcmcia_socket *s = pcmcia_get_socket(skt);
...
-       switch (event) {
...
-       case CS_EVENT_PM_RESUME:
-               if (verify_cis_cache(skt) != 0) {
-                       dev_dbg(&skt->dev, "cis mismatch - different card\n");
-                       /* first, remove the card */
-                       ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-                       mutex_lock(&s->ops_mutex);
-                       destroy_cis_cache(skt);
-                       kfree(skt->fake_cis);
-                       skt->fake_cis = NULL;
-                       s->functions = 0;
-                       mutex_unlock(&s->ops_mutex);
-                       /* now, add the new card */
-                       ds_event(skt, CS_EVENT_CARD_INSERTION,
-                                CS_EVENT_PRI_LOW);
-               }
-               break;
...
-    }

-    pcmcia_put_socket(s);

-    return 0;
-} /* ds_event */

to:

+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+       if (!verify_cis_cache(skt)) {
+               pcmcia_put_socket(skt);
+               return 0;
+       }

+       dev_dbg(&skt->dev, "cis mismatch - different card\n");

+       /* first, remove the card */
+       pcmcia_bus_remove(skt);
+       mutex_lock(&skt->ops_mutex);
+       destroy_cis_cache(skt);
+       kfree(skt->fake_cis);
+       skt->fake_cis = NULL;
+       skt->functions = 0;
+       mutex_unlock(&skt->ops_mutex);

+       /* now, add the new card */
+       pcmcia_bus_add(skt);
+       return 0;
+}

As can be seen, the original function called pcmcia_get_socket() and
pcmcia_put_socket() around the guts, whereas the replacement code
calls pcmcia_put_socket() only in one path.  This creates an imbalance
in the refcounting.

Testing with pcmcia_put_socket() put removed shows that the bug is gone:

  dpm_suspend: c1a10998 [pcmcia_socket0] 5
  dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5
  dpm_resume: c1a10998 [pcmcia_socket0] 5
  dpm_complete: c1a10998 [pcmcia_socket0] 5
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_SMP=n CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SPINLOCK=n kernel: spin_is_locked() is then always false,
and so triggers some BUGs in Transparent HugePage codepaths.

asm-generic/bug.h mentions this problem, and provides a WARN_ON_SMP(x);
but being too lazy to add VM_BUG_ON_SMP, BUG_ON_SMP, WARN_ON_SMP_ONCE,
VM_WARN_ON_SMP_ONCE, just test NR_CPUS != 1 in the existing VM_BUG_ONs.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In current code, pltfm->als_vmin is set to LM3530_ALS_WINDOW_mV and
pltfm->als_vmax is 0.  This does not make sense.  I think what we want
here is setting pltfm->als_vmax to LM3530_ALS_WINDOW_mV.

Both als_vmin and als_vmax local variables will be set to
pltfm->als_vmin and pltfm->als_vmax by a few lines latter.  Thus also
remove a redundant assignment for als_vmin and als_vmax in this patch.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Acked-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Tested-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When isolating pages for migration, migration starts at the start of a
zone while the free scanner starts at the end of the zone.  Migration
avoids entering a new zone by never going beyond the free scanned.

Unfortunately, in very rare cases nodes can overlap.  When this happens,
migration isolates pages without the LRU lock held, corrupting lists
which will trigger errors in reclaim or during page free such as in the
following oops

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff810f795c>] free_pcppages_bulk+0xcc/0x450
  PGD 1dda554067 PUD 1e1cb58067 PMD 0
  Oops: 0000 [#1] SMP
  CPU 37
  Pid: 17088, comm: memcg_process_s Tainted: G            X
  RIP: free_pcppages_bulk+0xcc/0x450
  Process memcg_process_s (pid: 17088, threadinfo ffff881c2926e000, task ffff881c2926c0c0)
  Call Trace:
    free_hot_cold_page+0x17e/0x1f0
    __pagevec_free+0x90/0xb0
    release_pages+0x22a/0x260
    pagevec_lru_move_fn+0xf3/0x110
    putback_lru_page+0x66/0xe0
    unmap_and_move+0x156/0x180
    migrate_pages+0x9e/0x1b0
    compact_zone+0x1f3/0x2f0
    compact_zone_order+0xa2/0xe0
    try_to_compact_pages+0xdf/0x110
    __alloc_pages_direct_compact+0xee/0x1c0
    __alloc_pages_slowpath+0x370/0x830
    __alloc_pages_nodemask+0x1b1/0x1c0
    alloc_pages_vma+0x9b/0x160
    do_huge_pmd_anonymous_page+0x160/0x270
    do_page_fault+0x207/0x4c0
    page_fault+0x25/0x30

The "X" in the taint flag means that external modules were loaded but but
is unrelated to the bug triggering.  The real problem was because the PFN
layout looks like this

  Zone PFN ranges:
    DMA      0x00000010 -> 0x00001000
    DMA32    0x00001000 -> 0x00100000
    Normal   0x00100000 -> 0x01e80000
  Movable zone start PFN for each node
  early_node_map[14] active PFN ranges
      0: 0x00000010 -> 0x0000009b
      0: 0x00000100 -> 0x0007a1ec
      0: 0x0007a354 -> 0x0007a379
      0: 0x0007f7ff -> 0x0007f800
      0: 0x00100000 -> 0x00680000
      1: 0x00680000 -> 0x00e80000
      0: 0x00e80000 -> 0x01080000
      1: 0x01080000 -> 0x01280000
      0: 0x01280000 -> 0x01480000
      1: 0x01480000 -> 0x01680000
      0: 0x01680000 -> 0x01880000
      1: 0x01880000 -> 0x01a80000
      0: 0x01a80000 -> 0x01c80000
      1: 0x01c80000 -> 0x01e80000

The fix is straight-forward.  isolate_migratepages() has to make a
similar check to isolate_freepage to ensure that it never isolates pages
from a zone it does not hold the LRU lock for.

This was discovered in a 3.0-based kernel but it affects 3.1.x, 3.2.x
and current mainline.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nsegs is read from userspace.  Limit its value and avoid overflowing nsegs
* sizeof(__u64) in the subsequent call to memdup_user().

This patch complements 481fe17e ("nilfs2: potential integer overflow
in nilfs_ioctl_clean_segments()").
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Cc: Haogang Chen <haogangchen@gmail.com>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sound fixes #2 for 3.3-rc3

A collection of small fixes, mostly for regressions.
In addition, a few ASoC wm8994 updates are included, too.

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Disable line output discharge prior to ramping VMID
  ASoC: wm8994: Fix typo in VMID ramp setting
  ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs
  ALSA: usb-audio: add Edirol UM-3G support
  ALSA: hda - add support for Uniwill ECS M31EI notebook
  ALSA: hda - Fix error handling in patch_ca0132.c
  ASoC: wm8994: Enabling VMID should take a runtime PM reference
  ALSA: hda/realtek - Fix a wrong condition
  ALSA: emu8000: Remove duplicate linux/moduleparam.h include from emu8000_patch.c
  ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves
  ASoC: wm_hubs: Correct line input to line output 2 paths
  ASoC: cs42l73: Fix Output [X|A|V]SP_SCLK Sourcing Mode setting for master mode
  ASoC: wm8962: Fix word length configuration
  ASoC: core: Better support for idle_bias_off suspend ignores
  ASoC: wm8994: Remove ASoC level register cache sync
  ASoC: wm_hubs: Fix routing of input PGAs to line output mixer

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org