- 28 6月, 2017 1 次提交
-
-
由 Christoph Hellwig 提交于
s390 can also use noop_dma_ops, and while that currently does not return errors it will so in the future. Implementing the mapping_error method is the proper way to have per-ops error conditions. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
-
- 25 1月, 2017 1 次提交
-
-
由 Bart Van Assche 提交于
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 17 11月, 2016 3 次提交
-
-
由 Sebastian Ott 提交于
Get rid of a useless memset from dma_alloc. Users of dma_alloc who want zero initialized memory can get it by specifying __GFP_ZERO or use one of the zalloc variants. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We have 2 strategies to reduce the number of RPCIT instructions: * A HW feature indicated via the tlb_refresh bit allows us to omit RPCIT for invalid -> valid translation-table entry updates. * With "lazy flush" we omit RPCIT for valid -> invalid updates until we run out of dma addresses. When we have to reuse dma addresses we issue a global tlb flush using only one RPCIT instruction. Currently lazy flushing depends on tlb_refresh. Since there is no technical reason for this remove this dependency. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
__s390_dma_map_sg maps a dma-contiguous area. Although we only map whole pages we have to take into account that the area doesn't start or stop at a page boundary because we use the dma address to loop over the individual sg entries. Failing to do that might lead to an access of the wrong sg entry. Fixes: ee877b81 ("s390/pci_dma: improve map_sg") Reported-and-tested-by: NChristoph Raisch <raisch@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 12 11月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
gcc correctly warns about an incorrect use of the 'pa' variable in case we pass an empty scatterlist to __s390_dma_map_sg: arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg': arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds a bogus initialization to the function to sanitize the debug output. I would have preferred a solution without the initialization, but I only got the report from the kbuild bot after turning on the warning again, and didn't manage to reproduce it myself. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 9月, 2016 5 次提交
-
-
由 Sebastian Ott 提交于
Lazy unmap (defer tlb flush after unmap until dma address reuse) can greatly reduce the number of RPCIT instructions in the best case. In reality we are often far away from the best case scenario because our implementation suffers from the following problem: To create dma addresses we maintain an iommu bitmap and a pointer into that bitmap to mark the start of the next search. That pointer moves from the start to the end of that bitmap and we issue a global tlb flush once that pointer wraps around. To prevent address reuse before we issue the tlb flush we even have to move the next pointer during unmaps - when clearing a bit > next. This could lead to a situation where we only use the rear part of that bitmap and issue more tlb flushes than expected. To fix this we no longer clear bits during unmap but maintain a 2nd bitmap which we use to mark addresses that can't be reused until we issue the global tlb flush after wrap around. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Split dma_update_trans into __dma_update_trans which handles updating the dma translation tables and __dma_purge_tlb which takes care of purging associated entries in the dma translation lookaside buffer. The map_sg API makes use of this split approach by calling __dma_update_trans once per physically contiguous address range but __dma_purge_tlb only once per dma contiguous address range. This results in less invocations of the expensive RPCIT instruction when using map_sg. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Our map_sg implementation mapped sg entries independently of each other. For ease of use and possible performance improvements this patch changes the implementation to try to map as many (likely physically non-contiguous) sglist entries as possible into a contiguous DMA segment. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Simplify the code we use to calculate dma addresses by putting everything related in a dma_alloc_address function. Also provide a dma_free_address counterpart. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We calculate dma addresses using an iommu bitmap. Since commit 69eea95c ("s390/pci_dma: fix DMA table corruption with > 4 TB main memory") we've made sure that addresses created using that bitmap are below the maximum reported by firmware. Thus the additional check for that address to be within range can be removed. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 8月, 2016 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: NVineet Gupta <vgupta@synopsys.com> Acked-by: NRobin Murphy <robin.murphy@arm.com> Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 6月, 2016 2 次提交
-
-
由 Sebastian Ott 提交于
When we use the iommu_area_alloc helper to get dma addresses we specify the boundary_size parameter but not the offset (called shift in this context). As long as the offset (start_dma) is a multiple of the boundary we're ok (on current machines start_dma always seems to be 4GB). Don't leave this to chance and specify the offset for iommu_area_alloc. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We don't have an architectural guarantee on the value of the dma offset but rely on it to be at least page aligned. Enforce page alignemt of start_dma. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 21 4月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
After a failure during registration of the dma_table (because of the function being in error state) we free its memory but don't reset the associated pointer to zero. When we then receive a notification from firmware (about the function being in error state) we'll try to walk and free the dma_table again. Fix this by resetting the dma_table pointer. In addition to that make sure that we free the iommu_bitmap when appropriate. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 02 3月, 2016 1 次提交
-
-
由 Christian Borntraeger 提交于
As virtio-ccw will have dma ops, we can no longer default to the zPCI ones. Make use of dev_archdata to keep the dma_ops per device. The pci devices now use that to override the default, and the default is changed to use the noop ops for everything that does not specify a device specific one. To compile without PCI support we will enable HAS_DMA all the time, via the default config in lib/Kconfig. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NJoerg Roedel <jroedel@suse.de> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 23 2月, 2016 1 次提交
-
-
由 Sebastian Ott 提交于
For each PCI function we need to maintain arch specific data in struct zpci_dev which also contains a pointer to struct pci_dev. When a function is registered or deregistered (which is triggered by PCI common code) we need to adjust that pointer which could interfere with the machine check handler (triggered by FW) using zpci_dev->pdev. Since multiple instances of the same pdev could exist at a time this can't be solved with locking. Fix that by ditching the pdev pointer and use a bus walk to reach struct pci_dev (only one instance of a pdev can be registered at the bus at a time). Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 1月, 2016 1 次提交
-
-
由 Al Viro 提交于
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 11月, 2015 1 次提交
-
-
由 Gerald Schaefer 提交于
DMA addresses returned from map_page() are calculated by using an iommu bitmap plus a start_dma offset. The size of this bitmap is based on the main memory size. If we have more than (4 TB - start_dma) main memory, the DMA address calculation will also produce addresses > 4 TB. Such addresses cannot be inserted in the 3-level DMA page table, instead the entries modulo 4 TB will be overwritten. Fix this by restricting the iommu bitmap size to (4 TB - start_dma). Also set zdev->end_dma to the actual end address of the usable range, instead of the theoretical maximum as reported by the hardware, which fixes a sanity check in dma_map() and also the IOMMU API domain geometry aperture calculation. Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 11月, 2015 3 次提交
-
-
由 Sebastian Ott 提交于
Improve debugging to find out what went wrong during a failed dma map/unmap operation. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We use lazy allocation for translation table entries but don't handle allocation (and other) failures during translation table updates. Handle these failures and undo translation table updates when it's meaningful. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Newly allocated translation table entries are flagged as invalid and protected. If an existing translation table entry is invalidated, the protection flag is left unchanged. If a page (with invalid and protection flag set) is accessed it's undefined which type of exception we'll receive. Make sure to always set the invalid flag only. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 06 10月, 2015 1 次提交
-
-
由 Gerald Schaefer 提交于
This adds an IOMMU API implementation for s390 PCI devices. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
- 11 9月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2015 1 次提交
-
-
由 Sebastian Ott 提交于
Inline get_zdev to save ~200 bytes of kernel text for CONFIG_PCI=y. Also rename the function to to_zpci to make clear that we don't do reference counting here. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 15 4月, 2015 1 次提交
-
-
由 Sebastian Ott 提交于
The software counters are not a part of the function measurement block. Also we do not check for zdev->fmb != NULL when using these counters (function measurement can be toggled at runtime). Just move the software counters to struct zpci_dev. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 7月, 2014 1 次提交
-
-
由 Gerald Schaefer 提交于
This changes the default IOTLB flushing method to lazy flushing, which means that there will be no direct flush after each DMA unmap operation. Instead, the iommu bitmap pointer will be adjusted after unmap, so that no DMA address will be re-used until after an iommu bitmap wrap-around. The only IOTLB flush will then happen after each wrap-around. A new kernel parameter "s390_iommu=" is also introduced, to allow changing the flushing behaviour to the old strict method. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 21 2月, 2014 1 次提交
-
-
由 Gerald Schaefer 提交于
The boundary size for iommu_area_alloc() is currently set to a constant value. This is wrong, we shouldn't use a constant value but rather the return value of dma_get_seg_boundary(), since a device driver can override the default. Reviewed-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 12月, 2013 1 次提交
-
-
由 Sebastian Ott 提交于
allocated_pages sometimes are increased even if s390_dma_alloc fails also this value is never decreased even if s390_dma_free is called. This patch fixes these bugs. Also remove the atomic64_t casts (the members are already of this type). Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 10月, 2013 1 次提交
-
-
由 Sebastian Ott 提交于
Cleanup arch specific pci messages. Remove unhelpful messages and replace others with entries in the debugfs. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 8月, 2013 1 次提交
-
-
由 Sebastian Ott 提交于
The bitmap used to mark dma mappings can be quite large on systems with huge amounts of memory. Use virtual memory for this bitmap. Suggested-by: NAlexander Schmidt <alexschm@de.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 8月, 2013 1 次提交
-
-
由 Martin Schwidefsky 提交于
Rename s390pci_xyz to zpci_xxz and set_irq_ctrl to zpci_set_irq_ctrl. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 6月, 2013 1 次提交
-
-
由 Sebastian Ott 提交于
Use the to_pci_dev macro to fetch a pci_dev from a struct device pointer. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 4月, 2013 1 次提交
-
-
由 Gerald Schaefer 提交于
For offset > PAGE_SIZE, s390_dma_map_pages() will issue a warning and return a wrong dma address. This patch removes the warning and fixes the dma return address calculation. Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 4月, 2013 1 次提交
-
-
由 Sebastian Ott 提交于
Use distinct (and hopefully sane) names for the pci instruction wrappers. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 08 1月, 2013 1 次提交
-
-
由 Heiko Carstens 提交于
Get rid of these: arch/s390/pci/pci_dma.c:16:29: warning: ‘zpci_ioat_dt’ defined but not used [-Wunused-variable] arch/s390/pci/pci.c:164:12: warning: ‘zpci_store_fib’ defined but not used [-Wunused-function] Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 12月, 2012 1 次提交
-
-
由 Jan Glauber 提交于
Add support for reading the PCI function measurement block counters provided by the hypervisor. Add two s390 debug features, one for critical errors and one for tracing and provide wrappers to log data. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 03 12月, 2012 1 次提交
-
-
由 Wei Yongjun 提交于
The dereference to 'zdev' should be moved below the NULL test. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 01 12月, 2012 1 次提交
-
-
由 Jan Glauber 提交于
Add DMA IOMMU support using 4K page table entries. Implement dma_map_ops. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-