- 16 7月, 2013 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
A comment and a #define in board-armadillo800eva.c have been left over after recent changes and are no longer relevant or needed, remove them. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 10 7月, 2013 1 次提交
-
-
由 Robin Holt 提交于
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: NRobin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 6月, 2013 1 次提交
-
-
由 Sergei Shtylyov 提交于
Get the R8A7740 code/data in the driver out of #ifdef by adding "r8a7740-gether" to the platform driver's ID table. Change the GEther platform device's name in the ARM platform code accordingly. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2013 1 次提交
-
-
由 Bastian Hecht 提交于
We use the new pinctrl framework now. Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 04 6月, 2013 7 次提交
-
-
由 Laurent Pinchart 提交于
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
LCDC routing is configured automatically in the PFC driver, don't configure it manually in board code. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Replace the GPIO-based HDMI pinmux configuration by a pinctrl mapping. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Replace the GPIO-based CEU0 pinmux configuration by a pinctrl mapping. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Replace the GPIO-based GETHER pinmux configuration by a pinctrl mapping. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Replace the GPIO-based INTC pinmux configuration by a pinctrl mapping. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 16 4月, 2013 1 次提交
-
-
由 Bastian Hecht 提交于
We no longer need to set up the reset pin for the st1232 in the board code, but can pass the GPIO number via the platform data to the driver. This results in a cleaner grouping of the device setup. Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 4月, 2013 2 次提交
-
-
由 Kuninori Morimoto 提交于
This patch fixup below sparse errors CHECK ${RENESAS_USB}/common.c ${RENESAS_USB}/common.c:313:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:322:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:384:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:524:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:545:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:574:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:606:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/mod_gadget.c:233:28: warning: symbol 'req_clear_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:274:28: warning: symbol 'req_set_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:375:28: warning: symbol 'req_get_status' was not declared. Should it be static? [ balbi@ti.com : added three sparse fixes to mod_gadget.c ] Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Bastian Hecht 提交于
With the added capabilty of the intc_irqpin driver to handle shared external IRQs, all prerequisites are fulfilled and we are ready to migrate completely to GIC. This includes the following steps: - Kconfig: select ARM_GIC and RENESAS_INTC_IRQPIN - intc-r8a7740: Throw out all legacy INTC code and init the GIC. We need to mask out all shared IRQs as it is needed by the shared intc_irqpin driver. - setup-r8a7740: Add 4 irqpin devices to handle external IRQs and update all IRQ numbers to point to the GIC SPI. - board-armadillo: Update all IRQ numbers to point to the GIC SPI. - pfc-r8a7740: Update all IRQ numbers of the GPIOs to point to the GIC SPI. Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 21 3月, 2013 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
The SDHI1 power supply on armadillo800eva can be switched on and off. In the current version this is not used and the regulator is hard-wired to "on." This patch switches SDHI1 to a proper fixed-voltage regulator, using a GPIO to enable and disable it. Both SDHI0 and SDHI1 ports shall now be specifying the MMC_CAP_POWER_OFF_CARD MMC capability. Both interfaces tested with an SDIO card. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 18 3月, 2013 2 次提交
-
-
由 Guennadi Liakhovetski 提交于
When regulators are used with MMC devices, explicitly provided OCR masks are ignored, they can be removed from platform data. Also switch SDHI0 from fixed regulator with hard-wired GPIO levels to a proper GPIO regulator instance to enable dynamic voltage switching. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Guennadi Liakhovetski 提交于
Switch SDHI0 and SDHI1 SD-card interfaces on armadillo800eva to using GPIO card detection, which provides maximum power saving and automatically selects IRQ or polling mode, depending on the CD GPIO capability. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 15 3月, 2013 3 次提交
-
-
由 Laurent Pinchart 提交于
Replace the GPIO-based SDHI and MMCIF pinmux configuration by pinctrl mappings. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
由 Laurent Pinchart 提交于
Replace the GPIO-based LCDC0 pinmux configuration by pinctrl mappings. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Laurent Pinchart 提交于
The PFC GPIO API implementation moved to using port numbers. Replace all GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx enum values are identical to the port number on this platform. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 30 1月, 2013 1 次提交
-
-
由 Hideki EIRAKU 提交于
Previously clock rates were set after initialization of timer. Therefore the timer used the default extal1 clock rate (25MHz) instead of the correct rate for this board (24MHz). Signed-off-by: NHideki EIRAKU <hdk@igel.co.jp> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 28 1月, 2013 2 次提交
-
-
由 Laurent Pinchart 提交于
The GPIO is already configured as an output, there's no reason to use gpio_direction_output() just to set the output value. Use gpio_set_value() instead. Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Laurent Pinchart 提交于
Replace occurences of gpio_request() and gpio_direction_*() by calls to gpio_request_one(). Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 25 1月, 2013 2 次提交
-
-
由 Bastian Hecht 提交于
Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep. It is entered by a simple dsb and wfi instruction via cpu_do_idle(). As just clocks are stopped there is no need to save or restore any state of the system. Signed-off-by: NBastian Hecht <hechtb+renesas@gmail.com> Acked-by: NMagnus Damm <damm@opensource.se> [ horms@verge.net.au: Added missing includes ] Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Kuninori Morimoto 提交于
wm8978 codec requires amixer settings for capture. This patch adds sample amixer settings on comment area. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 14 1月, 2013 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current simple-card driver calls asoc_simple_card_dai_init() if platform had a asoc_simple_card_dai_init pointer. And, this initialization function works only when platform has an applicable initial value for each dai settings. And basically, almost all sound card requires certain initialization. This means that almost all platform has initialization settings, and driver do nothing if it doesn't have settings. And additionally, current simple-card supports sysclk settings but it was only for codec. In order to abolish deviation between cpu and codec, and in order to simplify processing, this patch adds asoc_simple_dai, and removed pointless struct asoc_simple_dai_init_info which was trigger of calling asoc_simple_card_dai_init(). Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 12月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 08 11月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current FSI driver can control audio clock without platform call-back functions This patch removed board-specific call-back/settings Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 30 10月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
Cc: Masahiro Nakai <nakai@atmark-techno.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 15 10月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
a2a47ca3 (ARM: __io abuse cleanup) cleanuped __io() -> IOMEM(), but armadillo800eva was a outside of a target, since "merge window" timing issue. This patch cleanup it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 18 9月, 2012 1 次提交
-
-
由 Arnd Bergmann 提交于
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. This patch is a bit ugly for shmobile, which is the only platform that just uses integer literals all over the place, but I can't see a better way to do this. Acked-by: NSimon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 14 9月, 2012 1 次提交
-
-
由 Rob Herring 提交于
Move custom shmobile gpio code to a sh-gpio.h to remove the dependency on mach/gpio.h. shmobile always uses gpiolib, so we can remove __GPIOLIB_COMPLEX define from mach/gpio.h. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com>
-
- 13 9月, 2012 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
The armadillo800eva has S35390A which is RTC. This is controlled using I2C of GPIO. This commit supports RTC of armadillo800eva. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 04 9月, 2012 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Make the power management code under arch/arm/mach-shmobile/ use names of power domains instead of pointers to domain objects for adding devices to the domains. This will allow us to put the domain objects into tables and register them all in one shot going forward. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NMagnus Damm <damm@opensource.se>
-
- 31 8月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
Since armadillo800eva has 2 sound cards, and had reversed deferred probe order issue, it was purposely registered in reverse order. But it was solved by 1d29cfa5 (driver core: fixup reversed deferred probe order) armadillo800eva board is expecting that FSI-WM8978 is the 1st, and FSI-HDMI is the 2nd sound card. This patch fixes it up Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 25 8月, 2012 2 次提交
-
-
由 Laurent Pinchart 提交于
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
由 Laurent Pinchart 提交于
The GPIO buttons are named SW3, SW4, SW5 and SW6 on the board silkscreen. Update the buttons descriptions accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NSimon Horman <horms@verge.net.au>
-
- 07 7月, 2012 3 次提交
-
-
由 Kuninori Morimoto 提交于
Because USB Func is controlled by external IRQ mode, it is possible to control USB under A3SP domain to reduce power. This patch enables it. Armadillo800eva board switchs USB Host/Func by SW1.6, So, the device to adds into domain is selected on this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
It is possible to control LCDC under A4LC domain to reduce power. This patch enable it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Kuninori Morimoto 提交于
We can control renesas_usbhs driver as 2 way which are autonomy mode and external IRQ trigger mode. Autonomy mode is very easy settings for platform, but it required USB power domain always ON, since its connection/disconnection IRQ come from it. If platform uses external IRQ trigger mode, USB power domain can be OFF, since its connection/disconnection IRQ come from external IRQ. This patch enable external IRQ mode. Now it is possible to add USB support on A4SP domain. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-