- 23 11月, 2012 1 次提交
-
-
由 Julian Anastasov 提交于
Starting from 3.6 we cache output routes for multicasts only when using route to 224/4. For local receivers we can set RTCF_LOCAL flag depending on the membership but in such case we use maddr and saddr which are not caching keys as before. Additionally, we can not use same place to cache routes that differ in RTCF_LOCAL flag value. Fix it by caching only RTCF_MULTICAST entries without RTCF_LOCAL (send-only, no loopback). As a side effect, we avoid unneeded lookup for fnhe when not caching because multicasts are not redirected and they do not learn PMTU. Thanks to Maxime Bizon for showing the caching problems in __mkroute_output for 3.6 kernels: different RTCF_LOCAL flag in cache can lead to wrong ip_mc_output or ip_output call and the visible problem is that traffic can not reach local receivers via loopback. Reported-by: NMaxime Bizon <mbizon@freebox.fr> Tested-by: NMaxime Bizon <mbizon@freebox.fr> Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
order-5 allocations can fail with current kernels, we should try vmalloc() as well. Reported-by: NJulien Tinnes <jln@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2012 1 次提交
-
-
由 Andrew Vagin 提交于
Currently if a socket was repaired with a few packet in a write queue, a kernel bug may be triggered: kernel BUG at net/ipv4/tcp_output.c:2330! RIP: 0010:[<ffffffff8155784f>] tcp_retransmit_skb+0x5ff/0x610 According to the initial realization v3.4-rc2-963-gc0e88ff0, all skb-s should look like already posted. This patch fixes code according with this sentence. Here are three points, which were not done in the initial patch: 1. A tcp send head should not be changed 2. Initialize TSO state of a skb 3. Reset the retransmission time This patch moves logic from tcp_sendmsg to tcp_write_xmit. A packet passes the ussual way, but isn't sent to network. This patch solves all described problems and handles tcp_sendpages. Cc: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrey Vagin <avagin@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2012 1 次提交
-
-
由 Saurabh Mohan 提交于
With the latest kernel there are two things that must be done post decryption so that the packet are forwarded. 1. Remove the mark from the packet. This will cause the packet to not match the ipsec-policy again. However doing this causes the post-decryption check to fail also and the packet will get dropped. (cat /proc/net/xfrm_stat). 2. Remove the sp association in the skbuff so that no policy check is done on the packet for VTI tunnels. Due to #2 above we must now do a security-policy check in the vti rcv path prior to resetting the mark in the skbuff. Signed-off-by: NSaurabh Mohan <saurabh.mohan@vyatta.com> Reported-by: NRuben Herold <ruben@puettmann.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
We added support for RFC 5961 in latest kernels but TCP fails to perform exhaustive check of ACK sequence. We can update our view of peer tsval from a frame that is later discarded by tcp_ack() This makes timestamps enabled sessions vulnerable to injection of a high tsval : peers start an ACK storm, since the victim sends a dupack each time it receives an ACK from the other peer. As tcp_validate_incoming() is called before tcp_ack(), we should not peform tcp_replace_ts_recent() from it, and let callers do it at the right time. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Romain Francoise <romain@orebokech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2012 1 次提交
-
-
由 Steffen Klassert 提交于
The xfrm gc threshold value depends on ip_rt_max_size. This value was set to INT_MAX with the routing cache removal patch, so we start doing garbage collecting when we have INT_MAX/2 IPsec routes cached. Fix this by going back to the static threshold of 1024 routes. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 12 11月, 2012 1 次提交
-
-
由 Xi Wang 提交于
(1<<optname) is undefined behavior in C with a negative optname or optname larger than 31. In those cases the result of the shift is not necessarily zero (e.g., on x86). This patch simplifies the code with a switch statement on optname. It also allows the compiler to generate better code (e.g., using a 64-bit mask). Signed-off-by: NXi Wang <xi.wang@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2012 1 次提交
-
-
由 Cyrill Gorcunov 提交于
We've observed that in case if UDP diag module is not supported in kernel the netlink returns NLMSG_DONE without notifying a caller that handler is missed. This patch makes __inet_diag_dump to return error code instead. So as example it become possible to detect such situation and handle it gracefully on userspace level. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> CC: David Miller <davem@davemloft.net> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Pavel Emelyanov <xemul@parallels.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 11月, 2012 1 次提交
-
-
由 Pavel Emelyanov 提交于
When sending data into a tcp socket in repair state we should check for the amount of data being 0 explicitly. Otherwise we'll have an skb with seq == end_seq in rcv queue, but tcp doesn't expect this to happen (in particular a warn_on in tcp_recvmsg shoots). Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Reported-by: NGiorgos Mavrikas <gmavrikas@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2012 2 次提交
-
-
由 Julian Anastasov 提交于
Fix double sizeof when parsing IPv6 address from user space because it breaks get/del by specific IPv6 address. Problem noticed by David Binderman: https://bugzilla.kernel.org/show_bug.cgi?id=49171Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
Reading TCP stats when using TCP Illinois congestion control algorithm can cause a divide by zero kernel oops. The division by zero occur in tcp_illinois_info() at: do_div(t, ca->cnt_rtt); where ca->cnt_rtt can become zero (when rtt_reset is called) Steps to Reproduce: 1. Register tcp_illinois: # sysctl -w net.ipv4.tcp_congestion_control=illinois 2. Monitor internal TCP information via command "ss -i" # watch -d ss -i 3. Establish new TCP conn to machine Either it fails at the initial conn, or else it needs to wait for a loss or a reset. This is only related to reading stats. The function avg_delay() also performs the same divide, but is guarded with a (ca->cnt_rtt > 0) at its calling point in update_params(). Thus, simply fix tcp_illinois_info(). Function tcp_illinois_info() / get_info() is called without socket lock. Thus, eliminate any race condition on ca->cnt_rtt by using a local stack variable. Simply reuse info.tcpv_rttcnt, as its already set to ca->cnt_rtt. Function avg_delay() is not affected by this race condition, as its called with the socket lock. Cc: Petr Matousek <pmatouse@redhat.com> Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2012 1 次提交
-
-
由 Ulrich Weber 提交于
ICMP tuples have id in src and type/code in dst. So comparing src.u.all with dst.u.all will always fail here and ip_xfrm_me_harder() is called for every ICMP packet, even if there was no NAT. Signed-off-by: NUlrich Weber <ulrich.weber@sophos.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 23 10月, 2012 2 次提交
-
-
由 Jerry Chu 提交于
A packet with an invalid ack_seq may cause a TCP Fast Open socket to switch to the unexpected TCP_CLOSING state, triggering a BUG_ON kernel panic. When a FIN packet with an invalid ack_seq# arrives at a socket in the TCP_FIN_WAIT1 state, rather than discarding the packet, the current code will accept the FIN, causing state transition to TCP_CLOSING. This may be a small deviation from RFC793, which seems to say that the packet should be dropped. Unfortunately I did not expect this case for Fast Open hence it will trigger a BUG_ON panic. It turns out there is really nothing bad about a TFO socket going into TCP_CLOSING state so I could just remove the BUG_ON statements. But after some thought I think it's better to treat this case like TCP_SYN_RECV and return a RST to the confused peer who caused the unacceptable ack_seq to be generated in the first place. Signed-off-by: NH.K. Jerry Chu <hkchu@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
Add a bit TCPI_OPT_SYN_DATA (32) to the socket option TCP_INFO:tcpi_options. It's set if the data in SYN (sent or received) is acked by SYN-ACK. Server or client application can use this information to check Fast Open success rate. Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 10月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
tcp_ioctl() tries to take into account if tcp socket received a FIN to report correct number bytes in receive queue. But its flaky because if the application ate the last skb, we return 1 instead of 0. Correct way to detect that FIN was received is to test SOCK_DONE. Reported-by: NElliot Hughes <enh@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
Currently we can not flush cached pmtu/redirect informations via the ipv4_sysctl_rtcache_flush sysctl. We need to check the rt_genid of the old route and reset the nh exeption if the old route is expired when we bind a new route to a nh exeption. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2012 2 次提交
-
-
由 stephen hemminger 提交于
Use be32_to_cpu instead of htonl to keep sparse happy. Signed-off-by: NStephen Hemminger <shemminger@vyatta.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kuznetsov 提交于
After commit e2446eaa ("tcp_v4_send_reset: binding oif to iif in no sock case").. tcp resets are always lost, when routing is asymmetric. Yes, backing out that patch will result in misrouting of resets for dead connections which used interface binding when were alive, but we actually cannot do anything here. What's died that's died and correct handling normal unbound connections is obviously a priority. Comment to comment: > This has few benefits: > 1. tcp_v6_send_reset already did that. It was done to route resets for IPv6 link local addresses. It was a mistake to do so for global addresses. The patch fixes this as well. Actually, the problem appears to be even more serious than guaranteed loss of resets. As reported by Sergey Soloviev <sol@eqv.ru>, those misrouted resets create a lot of arp traffic and huge amount of unresolved arp entires putting down to knees NAT firewalls which use asymmetric routing. Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
-
- 12 10月, 2012 1 次提交
-
-
由 Alan Cox 提交于
If the rc_dereference of tcp_fastopen_ctx ever fails then we copy 16 bytes of kernel stack into the proc result. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2012 1 次提交
-
-
由 stephen hemminger 提交于
Sparse complains about RTA_MARK which is should be host order according to include file and usage in iproute. net/ipv4/route.c:2223:46: warning: incorrect type in argument 3 (different base types) net/ipv4/route.c:2223:46: expected restricted __be32 [usertype] value net/ipv4/route.c:2223:46: got unsigned int [unsigned] [usertype] flowic_mark Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2012 8 次提交
-
-
由 Julian Anastasov 提交于
Add flag to request that output route should be returned with known rt_gateway, in case we want to use it as nexthop for neighbour resolving. The returned route can be cached as follows: - in NH exception: because the cached routes are not shared with other destinations - in FIB NH: when using gateway because all destinations for NH share same gateway As last option, to return rt_gateway!=0 we have to set DST_NOCACHE. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Add new flag to remember when route is via gateway. We will use it to allow rt_gateway to contain address of directly connected host for the cases when DST_NOCACHE is used or when the NH exception caches per-destination route without DST_NOCACHE flag, i.e. when routes are not used for other destinations. By this way we force the neighbour resolving to work with the routed destination but we can use different address in the packet, feature needed for IPVS-DR where original packet for virtual IP is routed via route to real IP. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
Avoid checking nh_pcpu_rth_output in fast path, abort fib_info creation on alloc_percpu failure. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
After the change "Adjust semantics of rt->rt_gateway" (commit f8126f1d) rt_gateway can be 0 but ip_forward() compares it directly with nexthop. What we want here is to check if traffic is to directly connected nexthop and to fail if using gateway. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Anastasov 提交于
After "Cache input routes in fib_info nexthops" (commit d2d68ba9) and "Elide fib_validate_source() completely when possible" (commit 7a9bc9b8) we can not send ICMP redirects. It seems we should not cache the RTCF_DOREDIRECT flag in nh_rth_input because the same fib_info can be used for traffic that is not redirected, eg. from other input devices or from sources that are not in same subnet. As result, we have to disable the caching of RTCF_DOREDIRECT flag and to force source validation for the case when forwarding traffic to the input device. If traffic comes from directly connected source we allow redirection as it was done before both changes. Avoid setting RTCF_DOREDIRECT if IN_DEV_TX_REDIRECTS is disabled, this can avoid source address validation and to help caching the routes. After the change "Adjust semantics of rt->rt_gateway" (commit f8126f1d) we should make sure our ICMP_REDIR_HOST messages contain daddr instead of 0.0.0.0 when target is directly connected. Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
We report cached pmtu values even if they are already expired. Change this to not report these values after they are expired and fix a race in the expire time calculation, as suggested by Eric Dumazet. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
When a local tool like tracepath tries to send packets bigger than the device mtu, we create a nh exeption and set the pmtu to device mtu. The device mtu does not expire, so check if the device mtu is smaller than the reported pmtu and don't crerate a nh exeption in that case. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
Some protocols, like IPsec still cache routes. So we need to invalidate the old route on pmtu events to avoid the reuse of stale routes. We also need to update the mtu and expire time of the route if we already use a nh exception route, otherwise we ignore newly learned pmtu values after the first expiration. With this patch we always invalidate or update the route on pmtu events. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 10月, 2012 1 次提交
-
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 10月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
commit d2d68ba9 (ipv4: Cache input routes in fib_info nexthops.) introduced a regression for forwarding. This was hard to reproduce but the symptom was that packets were delivered to local host instead of being forwarded. David suggested to add fib_type to fib_info so that we dont inadvertently share same fib_info for different purposes. With help from Julian Anastasov who provided very helpful hints, reproduced here : <quote> Can it be a problem related to fib_info reuse from different routes. For example, when local IP address is created for subnet we have: broadcast 192.168.0.255 dev DEV proto kernel scope link src 192.168.0.1 192.168.0.0/24 dev DEV proto kernel scope link src 192.168.0.1 local 192.168.0.1 dev DEV proto kernel scope host src 192.168.0.1 The "dev DEV proto kernel scope link src 192.168.0.1" is a reused fib_info structure where we put cached routes. The result can be same fib_info for 192.168.0.255 and 192.168.0.0/24. RTN_BROADCAST is cached only for input routes. Incoming broadcast to 192.168.0.255 can be cached and can cause problems for traffic forwarded to 192.168.0.0/24. So, this patch should solve the problem because it separates the broadcast from unicast traffic. And the ip_route_input_slow caching will work for local and broadcast input routes (above routes 1 and 3) just because they differ in scope and use different fib_info. </quote> Many thanks to Chris Clayton for his patience and help. Reported-by: NChris Clayton <chris2553@googlemail.com> Bisected-by: NChris Clayton <chris2553@googlemail.com> Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Tested-by: NChris Clayton <chris2553@googlemail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 10月, 2012 4 次提交
-
-
由 stephen hemminger 提交于
Needed for VXLAN. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Use be16 consistently when looking at flags. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Add GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. Tested using IPv4 and IPv6 TCP traffic inside this tunnel, and checking GRO is building large packets. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
skb with CHECKSUM_NONE cant currently be handled by GRO, and we notice this deep in GRO stack in tcp[46]_gro_receive() But there are cases where GRO can be a benefit, even with a lack of checksums. This preliminary work is needed to add GRO support to tunnels. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 9月, 2012 6 次提交
-
-
由 Nicolas Dichtel 提交于
When jiffies wraps around (for example, 5 minutes after the boot, see INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be < XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus some icmp packets can be unexpectedly dropped. Fix this case by initializing last_rate to 60 seconds in the past. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
struct sock *sk is not used inside tcp_v4_save_options. Thus it can be removed. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Linux tunnels were written before RFC6040 and therefore never implemented the corner case of ECN getting set in the outer header and the inner header not being ready for it. Section 4.2. Default Tunnel Egress Behaviour. o If the inner ECN field is Not-ECT, the decapsulator MUST NOT propagate any other ECN codepoint onwards. This is because the inner Not-ECT marking is set by transports that rely on dropped packets as an indication of congestion and would not understand or respond to any other ECN codepoint [RFC4774]. Specifically: * If the inner ECN field is Not-ECT and the outer ECN field is CE, the decapsulator MUST drop the packet. * If the inner ECN field is Not-ECT and the outer ECN field is Not-ECT, ECT(0), or ECT(1), the decapsulator MUST forward the outgoing packet with the ECN field cleared to Not-ECT. This patch moves the ECN decap logic out of the individual tunnels into a common place. It also adds logging to allow detecting broken systems that set ECN bits incorrectly when tunneling (or an intermediate router might be changing the header). Overloads rx_frame_error to keep track of ECN related error. Thanks to Chris Wright who caught this while reviewing the new VXLAN tunnel. This code was tested by injecting faulty logic in other end GRE to send incorrectly encapsulated packets. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The handlers for xfrm_tunnel are always invoked with rcu read lock already. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The gre function pointers for receive and error handling are always called (from gre.c) with rcu_read_lock already held. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
GRE driver incorrectly uses zero as a flag value. Zero is a perfectly valid value for key, and the tunnel should match packets with no key only with tunnels created without key, and vice versa. This is a slightly visible change since previously it might be possible to construct a working tunnel that sent key 0 and received only because of the key wildcard of zero. I.e the sender sent key of zero, but tunnel was defined without key. Note: using gre key 0 requires iproute2 utilities v3.2 or later. The original utility code was broken as well. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-