- 02 6月, 2016 2 次提交
-
-
由 Vineet Gupta 提交于
This reverts commit b89aa12c. The issue was fixed in hardware in HS2.1C release and there are no known external users of affected RTL so revert the whole delayed retry series ! Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
This reverts commit 10971638. The issue was fixed in hardware in HS2.1C release and there are no known external users of affected RTL - so revert thw whole delayed retry series ! Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
- 31 5月, 2016 2 次提交
-
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
ARC700 support for 2 interrupt priorities historically allowed even slow perpherals such as emac and uart to setup high priority interrupts which was wrong from the beginning as they could possibly delay the more critical timer interrupt. The hardware support for 2 level interrupts in ARCompact is less than ideal anyways (judging from the "hacks" in low level entry code and thus is not used in productions systems I know of. So reduce the scope of this to timer only, thereby reducing a bunch of complexity. Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
- 30 5月, 2016 2 次提交
-
-
由 Alexey Brodkin 提交于
Now when we switched to usage of real clk devices for CPU core frequency those root properties make no sense any longer. Se we're just getting rid of them here to not confuse readers of our .dts files. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Christian Ruppert <christian.ruppert@alitech.com> Cc: Noam Camus <noamca@mellanox.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
- 29 5月, 2016 4 次提交
-
-
由 George Spelvin 提交于
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
由 George Spelvin 提交于
Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com>
-
由 George Spelvin 提交于
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.htmlSigned-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org
-
由 George Spelvin 提交于
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
- 28 5月, 2016 30 次提交
-
-
由 Anna-Maria Gleixner 提交于
The corresponding FROZEN hotplug notifier transitions used on suspend/resume are ignored. Therefore the switch case action argument is masked with the frozen hotplug notifier transition mask. Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13351/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
MicroMIPS kernels may be expected to run on microMIPS only cores which don't support the normal MIPS instruction set, so be sure to pass the -mmicromips flag through to the VDSO cflags. Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13349/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
In microMIPS kernels, handle_signal() sets the isa16 mode bit in the vdso address so that the sigreturn trampolines (which are offset from the VDSO) get executed as microMIPS. However commit ebb5e78c ("MIPS: Initial implementation of a VDSO") changed the offsets to come from the VDSO image, which already have the isa16 mode bit set correctly since they're extracted from the VDSO shared library symbol table. Drop the isa16 mode bit handling from handle_signal() to fix sigreturn for cores which support both microMIPS and normal MIPS. This doesn't fix microMIPS only cores, since the VDSO is still built for normal MIPS, but thats a separate problem. Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13348/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Antony Pavlov 提交于
Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Avoid an aliasing issue causing a build error in VDSO: In file included from include/linux/srcu.h:34:0, from include/linux/notifier.h:15, from ./arch/mips/include/asm/uprobes.h:9, from include/linux/uprobes.h:61, from include/linux/mm_types.h:13, from ./arch/mips/include/asm/vdso.h:14, from arch/mips/vdso/vdso.h:27, from arch/mips/vdso/gettimeofday.c:11: include/linux/workqueue.h: In function 'work_static': include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing] return *work_data_bits(work) & WORK_STRUCT_STATIC; ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0. Include `-fno-strict-aliasing' along with compiler options used, as required for kernel code, fixing a problem present since the introduction of VDSO with commit ebb5e78c ("MIPS: Initial implementation of a VDSO"). Thanks to Tejun for diagnosing this properly! Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Cc: Tejun Heo <tj@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.3+ Patchwork: https://patchwork.linux-mips.org/patch/13357/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Harvey Hunt 提交于
On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by: NHarvey Hunt <harvey.hunt@imgtec.com> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7 ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13364/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Add field definitions for some of the 64-bit specific Hardware page Table Walker (HTW) register fields in PWSize and PWCtl, in preparation for fixing the 64-bit HTW configuration. Also print these fields out along with the others in print_htw_config(). Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13363/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Simplify the DSP instruction wrapper macros which use explicit encodings for microMIPS and normal MIPS by using the new encoding macros and removing duplication. To me this makes it easier to read since it is much shorter, but it also ensures .insn is used, preventing objdump disassembling the microMIPS code as normal MIPS. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13314/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Hardcoded MIPS instruction encodings are provided for tlbinvf, mfhc0 & mthc0 instructions, but microMIPS encodings are missing. I doubt any microMIPS cores exist at present which support these instructions, but the microMIPS encodings exist, and microMIPS cores may support them in the future. Add the missing microMIPS encodings using the new macros. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13313/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
When the toolchain doesn't support MSA we encode MSA instructions explicitly in assembly. Unfortunately we use .word for both MIPS and microMIPS encodings which is wrong, since 32-bit microMIPS instructions are made up from a pair of halfwords. - The most significant halfword always comes first, so for little endian builds the halves will be emitted in the wrong order. - 32-bit alignment isn't guaranteed, so the assembler may insert a 16-bit nop instruction to pad the instruction stream to a 32-bit boundary. Use the new instruction encoding macros to encode microMIPS MSA instructions correctly. Fixes: d96cc3d1 ("MIPS: Add microMIPS MSA support.") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13312/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Toolchains may be used which support microMIPS but not VZ instructions (i.e. binutis 2.22 & 2.23), so extend the explicitly encoded versions of the guest COP0 register & guest TLB access macros to support microMIPS encodings too, using the new macros. This prevents non-microMIPS instructions being executed in microMIPS mode during CPU probe on cores supporting VZ (e.g. M5150), which cause reserved instruction exceptions early during boot. Fixes: bad50d79 ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13311/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
To allow simplification of macros which use inline assembly to explicitly encode instructions, add a few simple abstractions to mipsregs.h which expand to specific microMIPS or normal MIPS encodings depending on what type of kernel is being built: _ASM_INSN_IF_MIPS(_enc) : Emit a 32bit MIPS instruction if microMIPS is not enabled. _ASM_INSN32_IF_MM(_enc) : Emit a 32bit microMIPS instruction if enabled. _ASM_INSN16_IF_MM(_enc) : Emit a 16bit microMIPS instruction if enabled. The macros can be used one after another since the MIPS / microMIPS macros are mutually exclusive, for example: __asm__ __volatile__( ".set push\n\t" ".set noat\n\t" "# mfgc0 $1, $%1, %2\n\t" _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) "move %0, $1\n\t" ".set pop" : "=r" (__res) : "i" (source), "i" (sel)); Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13310/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Reported-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13338/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: rric@kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/13334/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: macro@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13333/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13331/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: paul.burton@imgtec.com Cc: macro@imgtec.com Cc: james.hogan@imgtec.com Cc: jslaby@suse.cz Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13330/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: macro@imgtec.com Cc: paul.burton@imgtec.com Cc: Leonid.Yegoshin@imgtec.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13329/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: adam.buchbinder@gmail.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13328/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: david.daney@cavium.com Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13324/ Patchwork: https://patchwork.linux-mips.org/patch/13325/ Patchwork: https://patchwork.linux-mips.org/patch/13326/ Patchwork: https://patchwork.linux-mips.org/patch/13327/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13323/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: chenhc@lemote.com Cc: viresh.kumar@linaro.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13322/ Patchwork: https://patchwork.linux-mips.org/patch/13332/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13321/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13320/ Patchwork: https://patchwork.linux-mips.org/patch/13335/ Patchwork: https://patchwork.linux-mips.org/patch/13336/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13319/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13318/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrea Gelmini 提交于
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Cc: chenhc@lemote.com Cc: james.hogan@imgtec.com Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13317/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-